summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2007-03-16Input: simplify input_free_device()Dmitry Torokhov
Now that sysfs attributes that were marked for deletion can't access their devices we do not need to set name, phys and uniq to NULL. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-03-14Input: add getkeycode and setkeycode methodsMarvin Raaijmakers
Allow drivers to implement their own get and set keycode methods. This will allow drivers to change their keymaps without allocating huge tables covering entire range of possible scancodes. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-03-10Input: psmouse - allow disabing certain protocol extensionsAndres Salomon
Allow ALPS, LOGIPS2PP, LIFEBOOK, TRACKPOINT and TOUCHKIT protocol extensions of psmouse to be disabled during compilation. This will allow users save some memory when they are sure that they will only use a certain type of mice. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-03-07Input: let driver core create class device attribute groupsDmitry Torokhov
Rely on device core to create attribute groups for input devices instead of open-coding it. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-03-07Input: export 'uniq' in /proc/bus/input/devicesDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-03-07Input: wistron - add support for TravelMate 610Eric Piel
Add support for Acer TravelMate 610 to wistron_btns. All special keys are detected, but the 2 leds are not handled (yet). Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-03-07Input: psmouse - do not force stream modeDmitry Torokhov
Forcing stream mode after reset confuses some devices (reported by Andrea Arcangeli) so let's take it out - spec says that after reset mouse should already be in stream mode. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-02-28Input: HIL - cleanup coding styleHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-02-28Input: HIL - various fixes for HIL driversHelge Deller
- mark some structures const or __read_mostly - hilkbd.c: fix uninitialized spinlock in HIL keyboard driver - hil_mlc.c: use USEC_PER_SEC instead of 1000000 - hp_sdc: bugfix for request_irq()/free_irq() parameters, this prevented multiple load/unload cycles as module Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-02-28Input: ads7846 - add support for the ads7843 touchscreenNicolas Ferre
The ads7843 support has now become almost trivial since the last rework. Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-02-18Input: add driver for MIPS Cobalt back panel buttonsYoichi Yuasa
Tested on Cobalt Qube2. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-02-18Input: psmouse - add support for eGalax PS/2 touchscreen controllerStefan Lucke
Based on the touchkit USB and lifebook PS/2 touchscreen driver. The egalax touchsreen controller (PS/2 or USB version) is used in this 7" device: http://www.cartft.com/catalog/il/449 Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-02-18Input: remove obsolete setup parameters from input driversDmitry Torokhov
They have been marked as __obsolete_setup() for several years, it is time for them to go. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-02-18Input: HIL - fix improper call to release_region()Cyrill V. Gorcunov
Do not call release_region() if the code has been compiled without CONFIG_HP300 support. Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-02-18Input: gpio-keys - switch to common GPIO APIPhilipp Zabel
This adds support for at least SA1100 and S3C24xx CPUs. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-02-18Input: do not lock device when showing name, phys and uniqDmitry Torokhov
Now that sysfs attributes return -ENODEV once driver requests their removal we do not need to handle scenario when data is deleted from under our feet and can simplify the code. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-02-18Input: i8042 - let serio bus suspend portsDmitry Torokhov
Let serio subsystem take care of suspending the ports; concentrate on suspending/resuming the controller itself. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-02-18Input: psmouse - properly reset mouse on shutdown/suspendDmitry Torokhov
Some people report that they need psmouse module unloaded for suspend to ram/disk to work properly. Let's make port cleanup behave the same way as driver unload. This fixes "bad state" roblem on various HP laptops, such as nx7400. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-02-16[PATCH] hrtimers: namespace and enum cleanupThomas Gleixner
- hrtimers did not use the hrtimer_restart enum and relied on the implict int representation. Fix the prototypes and the functions using the enums. - Use seperate name spaces for the enumerations - Convert hrtimer_restart macro to inline function - Add comments No functional changes. [akpm@osdl.org: fix input driver] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] Scheduled removal of SA_xxx interrupt flags fixups 2Thomas Gleixner
The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users in -mm. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] remove many unneeded #includes of sched.hTim Schmielau
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] mark struct file_operations const 3Arjan van de Ven
Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: remove scan_keyb driver Input: i8042 - fix AUX IRQ delivery check Input: wistron - add support for Fujitsu-Siemens Amilo D88x0 Input: inport - use correct config option for ATIXL Input: HIL - handle erros from input_register_device() Input: tsdev - schedule removal Input: add Atlas button driver Input: ads7846 - be more compatible with the hwmon framework Input: ads7846 - detect pen up from GPIO state Input: ads7846 - select correct SPI mode Input: ads7846 - switch to using hrtimer Input: ads7846 - optionally leave Vref on during differential measurements Input: ads7846 - pluggable filtering logic Input: gpio-keys - keyboard driver for GPIO buttons Input: hid-ff - add support for Logitech Momo racing wheel Input: i8042 - really suppress ACK/NAK during panic blink Input: pc110pad - return proper error
2007-02-11[PATCH] Remove unnecessary memset(0) calls after kzalloc() calls.Robert P. J. Day
Delete the few remaining unnecessary calls to memset(0) after a call to kzalloc(). Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: Andi Kleen <ak@suse.de> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10Input: i8042 - fix AUX IRQ delivery checkDmitry Torokhov
On boxes that do not implement AUX LOOP command we can not verify AUX IRQ delivery and must assume that it is wired properly. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-02-10Input: wistron - add support for Fujitsu-Siemens Amilo D88x0Michael Leun
Tested on a Amilo D8820. Signed-off-by: Michael Leun <ml@newton.leun.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-02-10Input: inport - use correct config option for ATIXLRobert P. J. Day
Change the apparently incorrect check for CONFIG_INPUT_ATIXL in a source file to be consistent with the kernel config option CONFIG_MOUSE_ATIXL. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-02-10Input: HIL - handle erros from input_register_device()Cyrill V. Gorcunov
Also some whitespace cleanup. Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-02-10Input: tsdev - schedule removalRichard Purdie
Compaq touchscreen emulation (drivers/input/tsdev.c) is old, was obsolete when it was written by the authors own admission and much better userspace solutions like tslib now exist. The name is also confusing. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-02-10Input: add Atlas button driverJaya Kumar
This patch adds support for the buttons on the Atlas wallmount touchscreen. Signed-off-by: Jaya Kumar <jayakumar.acpi@gmail.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-02-10Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6Dmitry Torokhov
2007-02-09[ALSA] ucb1400_ts.c compilation fix (struct snd_ac97)Andrew Morton
From: Andrew Morton <akpm@osdl.org> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-07SERIO: add the sysfs driver name to all modulesGreg Kroah-Hartman
This adds the module name to all SERIO drivers, if they are built into the kernel or not. It will show up in /sys/modules/MODULE_NAME/drivers/ Cc: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-18Input: ads7846 - be more compatible with the hwmon frameworkDavid Brownell
- Hook up to hwmon * show sensor attributes only if hwmon is present * ... and the board's reference voltage is known * otherwise be just a touchscreen - Report voltages per hwmon convention * measure in millivolts * voltages are named in[0-8]_input (ugh) * for 7846 chips, properly range-adjust vBATT/in1_input Battery measurements help during recharge monitoring. On OSK/Mistral, the measured voltage agreed with a multimeter to several decimal places. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-01-18Input: ads7846 - detect pen up from GPIO stateImre Deak
We can't depend on the pressure value to determine when the pen was lifted, so use the GPIO line state instead. This also helps with chips (like ads7843) that don't have pressure sensors. Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-01-18Input: ads7846 - select correct SPI modeImre Deak
Talk to ADS7846 chip using SPI mode 1, which is what the chip supports: writes on falling clock edge, reads on rising. Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-01-18Input: ads7846 - switch to using hrtimerImre Deak
Use hrtimer instead of the normal timer, since it provides better sampling resolution. This will: - avoid a problem where we have a 1 jiffy poll period and dynamic tick on - utilize high resolution HW clocks when they are added to the hrtimer framework Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-01-18Input: ads7846 - optionally leave Vref on during differential measurementsImre Deak
On some LCDs leaving the Vref on provides much better readings. Signed-off-by: Jarkko Oikarinen <jarkko.oikarinen@nokia.com> Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-01-18Input: ads7846 - pluggable filtering logicImre Deak
Some LCDs like the LS041Y3 require a customized filtering logic for reliable readings, so make the filtering function replacable through platform specific hooks. Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-01-18Input: gpio-keys - keyboard driver for GPIO buttonsPhil Blundell
This is an interrupt-driven keyboard driver for simple buttons connected directly to CPU GPIO lines of embedded ARM systems. It supports pxa architectures and is used by a number of PDAs and PocketPC phones in the handhelds.org kernel. Support for other architectures, such as sa11xx and sc2410, will be added once generic GPIO API is available. Signed-off-by: Paul Sokolovsky <pmiscml@gmail.com> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-01-18Input: i8042 - really suppress ACK/NAK during panic blinkDmitry Torokhov
On some boxes panic blink procedure manages to send both bytes to keyboard contoller before getting first ACK so we need to make i8042_suppress_kbd_ack a counter instead of boolean. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-12-31[SPARC64]: Fix of_iounmap() region release.David S. Miller
We need to pass in the resource otherwise we cannot release the region properly. We must know whether it is an I/O or MEM resource. Spotted by Eric Brower. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-21Input: pc110pad - return proper errorAkinobu Mita
The driver should return -ENODEV rather than -ENOENT when it detects a PCI device in the box. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-12-17[SUNKBD]: Fix sunkbd_enable(sunkbd, 0); obvious.Fabrice Knevez
"sunkbd_enable(sunkbd, 0);" has no effect. Adding "sunkbd->enabled = enable" in sunkbd_enable (obvious) Signed-off-by: Fabrice Knevez <nuxdoors@cegetel.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-17[PATCH] m68k trivial build fixesAl Viro
amikbd: missing declaration sun3_NCR5380: more work_struct mess sun3_NCR5380: cast is not an lvalue Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-12-13[PATCH] missing includes in hilkbdAl Viro
Now that it's built on m68k too... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-12[PATCH] remove config ordering/dependency between ucb1400-ts and sound subsystemNicolas Pitre
Commit 2d4ba4a3b9aef95d328d74a17ae84f8d658059e2 introduced a dependency that was never meant to exist when the ac97_bus.c module was created. Move ac97_bus.c up the directory hierarchy to make sure it is built when selected even if sound is configured out so things work as originally intended. Signed-off-by: Nicolas Pitre <nico@cam.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10[PATCH] ucb1400_ts depends SND_AC97_BUSRandy Dunlap
This driver is an AC97 codec according to its help text. However, if SOUND is disabled, the "select SND_AC97_BUS" still inserts that into the .config file: # # Sound # # CONFIG_SOUND is not set CONFIG_SND_AC97_BUS=m Even if the config software followed dependency chains on selects, we should try to limit usage of "select" to library-type code that is needed (e.g., CRC functions) instead of bus-type support. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08[PATCH] Generic HID layer - buildJiri Kosina
This modifies Makefiles and Kconfigs to properly reflect the creation of generic HID layer. It also removes the dependency of BROKEN, which was introduced by the first patch in series (see the comment). Also updates credits. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-08Input: ucb1400 - fix compile errorDmitry Torokhov
try_to_freeze() was moved into include/linux/freezer.h Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 20:54:32 +0000