summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2010-01-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: update multi-touch protocol documentation Input: add the ABS_MT_PRESSURE event Input: winbond-cir - remove dmesg spam Input: lifebook - add another Lifebook DMI signature Input: ad7879 - support auxiliary GPIOs via gpiolib
2010-01-28Input: add the ABS_MT_PRESSURE eventHenrik Rydberg
For pressure-based multi-touch devices, a direct way to send sensor intensity data per finger is needed. This patch adds the ABS_MT_PRESSURE event to the MT protocol. Requested-by: Yoonyoung Shim <jy0922.shim@samsung.com> Requested-by: Mika Kuoppala <mika.kuoppala@nokia.com> Requested-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-28Input: winbond-cir - remove dmesg spamDavid Härdeman
I missed converting one dev_info call to deb_dbg before submitting the driver. Without this change, a message will be printed to dmesg for each button press if a RC6 remote is used. Signed-off-by: David Härdeman <david@hardeman.nu> Cc: stable <stable@kernel.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-28Input: lifebook - add another Lifebook DMI signatureJon Dodgson
There are many many ways one can capitalize "Lifebook B Series"... Signed-off-by: Jon Dodgson <crayzeejon@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-19Input: ad7879 - support auxiliary GPIOs via gpiolibMichael Hennerich
Drop the simple fancy sysfs hooks for the aux GPIOs and expose these via the gpiolib interface so that other drivers can use them. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: sentelic - fix left/right horizontal scroll mapping Input: pmouse - move Sentelic probe down the list Input: add compat support for sysfs and /proc capabilities output Input: i8042 - add Dritek quirk for Acer Aspire 5610. Input: xbox - do not use GFP_KERNEL under spinlock Input: psmouse - fix Synaptics detection when protocol is disabled Input: bcm5974 - report ABS_MT events Input: davinci_keyscan - add device_enable method to platform data Input: evdev - be less aggressive about sending SIGIO notifies Input: atkbd - fix canceling event_work in disconnect Input: serio - fix potential deadlock when unbinding drivers Input: gf2k - fix &&/|| confusion in gf2k_connect()
2010-01-13Input: sentelic - fix left/right horizontal scroll mappingTai-hwa Liang
Signed-off-by: Tai-hwa Liang <avatar@sentelic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-13Input: pmouse - move Sentelic probe down the listTai-hwa Liang
Sentelic probes confuse IBM trackpoints so they stop responding to TP_READ_ID command. See: http://bugzilla.kernel.org/show_bug.cgi?id=14970 Let's move FSP detection lower so it is probed after trackpoint and others, just before we strat probing for Intellimouse Explorer. Signed-off-by: Tai-hwa Liang <avatar@sentelic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-12Input: add compat support for sysfs and /proc capabilities outputDmitry Torokhov
Input core displays capabilities bitmasks in form of one or more longs printed in hex form and separated by spaces. Unfortunately it does not work well for 32-bit applications running on 64-bit kernels since applications expect that number is "worth" only 32 bits when kernel advances by 64 bits. Fix that by ensuring that output produced for compat tasks uses 32-bit units. Reported-and-tested-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-11Input: i8042 - add Dritek quirk for Acer Aspire 5610.Elliott Sales de Andrade
Signed-off-by: Elliott Sales de Andrade <quantum.analyst@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-09Input: xbox - do not use GFP_KERNEL under spinlockDmitry Torokhov
xbox_play_effect() is called while holding dev->event_lock with interrupts disabled and thus may not use GFP_KERNEL when submitting urbs. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-07Input: psmouse - fix Synaptics detection when protocol is disabledDaniel Drake
For configurations where Synaptics hardware is present but the Synaptics extensions support is not compiled in, the mouse is reprobed and a new device is allocated on every suspend/resume. During probe, psmouse_switch_protocol() calls psmouse_extensions() with set_properties=1. This calls the dummy synaptics_init() which returns an error code, instructing us not to use the synaptics extensions. During resume, psmouse_reconnect() calls psmouse_extensions() with set_properties=0, in which case call to synaptics_init() is bypassed and PSMOUSE_SYNAPTICS is returned. Since the result is different from previous attempt psmouse_reconnect() fails and full re-probe happens. Fix this by tweaking the set_properties=0 codepath in psmouse_extensions() to be more careful about offering PSMOUSE_SYNAPTICS extensions. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: bcm5974 - report ABS_MT eventsHenrik Rydberg
Make bcm5974 report raw multi-touch (MT) data in the form of ABS_MT events. [dtor@mail.ru: get rid of module option, always report all events] Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: davinci_keyscan - add device_enable method to platform dataMiguel Aguilar
Add a function pointer in the platform data of the DaVinci Keyscan driver called device_enable, in order to perform board specific actions when the device is initialized, like setup the PINMUX configuration. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: evdev - be less aggressive about sending SIGIO notifiesAdam Jackson
When using realtime signals, we'll enqueue one signal for every event. This is unfortunate, because (for example) keyboard presses are three events: key, msc scancode, and syn. They'll be enqueued fast enough in kernel space that all three events will be ready to read by the time userspace runs, so the first invocation of the signal handler will read all three events, but then the second two invocations still have to run to do no work. Instead, only send the SIGIO notification on syn events. This is a slight abuse of SIGIO semantics, in principle it ought to fire as soon as any events are readable. But it matches evdev semantics, which is more important since SIGIO is rather vaguely defined to begin with. Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: atkbd - fix canceling event_work in disconnectDmitry Torokhov
We need to first unregister input device and only then cancel event work since events can arrive (and cause event work to get scheduled again) until input_unregister_device() returns. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: serio - fix potential deadlock when unbinding driversEric W. Biederman
sysfs_remove_group() waits for sysfs attributes to be removed, therefore we do not need to worry about driver-specific attributes being accessed after driver has been detached from the device. In fact, attempts to take serio->drv_mutex in attribute methods may lead to the following deadlock: sysfs_read_file() fill_read_buffer() sysfs_get_active_two() psmouse_attr_show_helper() serio_pin_driver() serio_disconnect_driver() mutex_lock(&serio->drv_mutex); <--------> mutex_lock(&serio_drv_mutex); psmouse_disconnect() sysfs_remove_group(... psmouse_attr_group); .... sysfs_deactivate(); wait_for_completion(); Fix this by removing calls to serio_[un]pin_driver() and functions themselves and using driver-private mutexes to serialize access to attribute's set() methods that may change device state. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-01Input: gf2k - fix &&/|| confusion in gf2k_connect()Roel Kluin
This always evaluates to true. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: iforce - wait for command completion when closing the device Input: twl4030-pwrbutton - switch to using threaded IRQ Input: twl4030_keypad - switch to using threaded IRQ Input: lifebook - add CONFIG_DMI dependency Input: wistron - fix test for CONFIG_PM Input: psmouse - fix compile warning in hgpk module Input: matrix-keypad - handle cases when GPIOs can't be wakeup sources Input: iforce - fix oops on device disconnect Input: ff-memless - add notion of direction to for rumble effects Input: ff-memless - another fix for signed to unsigned overflow Input: ff-memless - start playing FF effects immediately Input: serio - do not mark kseriod freezable anymore Input: speed up suspend/shutdown for PS/2 mice and keyboards
2009-12-30Input: iforce - wait for command completion when closing the deviceDmitry Torokhov
We need to wait for the command to disable FF effects to complete before continuing with closing the device. Tested-by: Johannes Ebke <johannes.ebke@physik.uni-muenchen.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-29Input: twl4030-pwrbutton - switch to using threaded IRQFelipe Balbi
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-29Input: twl4030_keypad - switch to using threaded IRQFelipe Balbi
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-29Input: lifebook - add CONFIG_DMI dependencyDmitry Torokhov
Lifebook protocol can only be activated if we find known DMI signature. It is useles without DMI. Reported-by: Rakib Mullick <rakib.mullick@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-29Input: wistron - fix test for CONFIG_PMRakib Mullick
This should fix the following compile warning: drivers/input/misc/wistron_btns.c:1331:5: warning: "CONFIG_PM" is not defined Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-29Input: psmouse - fix compile warning in hgpk moduleRené Bolldorf
The variable 'dev' is unused in function 'hgpk_register'. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-24Input: matrix-keypad - handle cases when GPIOs can't be wakeup sourcesDmitry Torokhov
On certain boards not all GPIOs may be used as wakeup sources, in which case some of enable_irq_wake() calls will fail. On resume calling disable_irq_wake() will warn about unbalanced IRQ wake disable. Solve this by checking whether enable_irq_wake() succeeded or not and no not call disable_irq_wake() for these GPIOs/IRQs that have not been enabled. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-24Input: iforce - fix oops on device disconnectDmitry Torokhov
Do not try to free iforce device when we closing input device; disconnect is the only place where it should be deleted. Reported-by: Johannes Ebke <johannes.ebke@physik.uni-muenchen.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-24Input: ff-memless - add notion of direction to for rumble effectsJari Vanhala
This adds simple direction calculation when combining effects. It's useful to decide motor direction for rumble (vibrator). Signed-off-by: Jari Vanhala <ext-jari.vanhala@nokia.com> Acked-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-24Input: ff-memless - another fix for signed to unsigned overflowDmitry Torokhov
The commit 9e68177ef93b2f34eee5a1e1707bceef4b9ba69c changed 'gain' from signed to unsigned to fix an issue with rumble effect calculation, however it introduced problems when calculating constant effects. Having 'gain' being unsigned int was an unfortunate choice since it dominates all implicit type conversions causing everything to be treated as unsigned int. Let's change it back to signed int and simply add proper casts to rumble effect calculations. Reported-by: Gary Stein <lordcnidarian@gmail.com> Acked-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-24Input: ff-memless - start playing FF effects immediatelyJari Vanhala
Instead of waiting for the next timer tick to start playing an effect do it immediately. This mostly helps systems using low HZ setting. Signed-off-by: Jari Vanhala <ext-jari.vanhala@nokia.com> Acked-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-24Input: serio - do not mark kseriod freezable anymoreDmitry Torokhov
We used to make kseriod freezable to prevent unnecessary attempts at resuming keyboard and mouse before taking hibernation image when suspend and hibernation were sharing PM operations. Now that they are separated and we don't risk resuming during 'thaw' we don't need to freeze kseriod anymore. This will allow us to start resetting mouse and keyboard a bit earlier, before rest of the userspace comes back up. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-24Input: speed up suspend/shutdown for PS/2 mice and keyboardsDmitry Torokhov
Instead of doing full-blown reset while suspending or shutting down the box use lighter form of reset that should take less time. Tested-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (22 commits) Input: ALPS - add interleaved protocol support (Dell E6x00 series) Input: keyboard - don't override beep with a bell Input: altera_ps2 - fix test of unsigned in altera_ps2_probe() Input: add mc13783 touchscreen driver Input: ep93xx_keypad - update driver to new core support Input: wacom - separate pen from express keys on Graphire Input: wacom - add defines for data packet report IDs Input: wacom - add support for new LCD tablets Input: wacom - add defines for packet lengths of various devices Input: wacom - ensure the device is initialized properly upon resume Input: at32psif - do not sleep in atomic context Input: i8042 - add Gigabyte M1022M to the noloop list Input: i8042 - allow installing platform filters for incoming data Input: i8042 - fix locking in interrupt routine Input: ALPS - do not set REL_X/REL_Y capabilities on the touchpad Input: document use of input_event() function Input: sa1111ps2 - annotate probe() and remove() methods Input: ambakmi - annotate probe() and remove() methods Input: gscps2 - fix probe() and remove() annotations Input: altera_ps2 - add annotations to probe and remove methods ...
2009-12-15Input: ALPS - add interleaved protocol support (Dell E6x00 series)Sebastian Kapfer
Properly handle version of the protocol where standard PS/2 packets from trackpoint are stuffed into middle (byte 3-6) of the standard ALPS packets when both the touchpad and trackpoint are used together. The patch is based on work done by Matthew Chapman and additional research done by David Kubicek and Erik Osterholm: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/296610 Many thanks to David Kubicek for his efforts in researching fine points of this new version of the protocol, especially interaction between pad and stick in these models. Signed-off-by: Sebastian Kapfer <sebastian_kapfer@gmx.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-15Input: altera_ps2 - fix test of unsigned in altera_ps2_probe()Roel Kluin
ps2if->irq is unsigned so the test does not work. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-15Input: add mc13783 touchscreen driverSascha Hauer
This driver provides support for the touchscreen interface integrated into the Freescale MC13783. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-15Input: ep93xx_keypad - update driver to new core supportH Hartley Sweeten
This driver was merged before the ep93xx core support was added for the keypad clock and acquiring/releasing the necessary gpio's. Now that the proper support is in the ep93xx core this driver needs to be updated to work correctly. Summary of changes: 1) Remove some unused members from the platform data. 2) Remove the custom KEY macro and use the ones available in <linux/input/matrix_keypad.h> 3) Remove the keypad_{readl/writel} macros and just use __raw_{readl/writel} directly. 4) Update the clk_set_rate() call to work with the core support. 5) Cleanup the probe routine and remove some unneeded messages. 6) Use the ep93xx core functions to acquire and release the gpio's. 7) Fix the clk_get() call to get the keypad clock. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-15const: constify remaining dev_pm_opsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15Merge commit 'linus' into nextDmitry Torokhov
2009-12-15Input: wacom - separate pen from express keys on GraphirePing Cheng
Since Graphire/Bamboo devices report pen and expresskeys in the same data packet, we need to send a input_sync event to separate pen data from expresskeys for X11 driver to process them properly. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-15Input: wacom - add defines for data packet report IDsPing Cheng
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-15Input: wacom - add support for new LCD tabletsPing Cheng
This adds support for the foolowing Wacom devices: - 0x9F - a single touch only LCD tablet; - 0xE2 - a two finger touch only LCD tablet; - 0xE3 - a two finger touch, penabled LCD tablet. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-15Input: wacom - add defines for packet lengths of various devicesPing Cheng
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-15Input: wacom - ensure the device is initialized properly upon resumePing Cheng
Call wacom_query_tablet_data() from wacom_resume() so the device will be switched to Wacom mode upon resume. Devices that require this are: regular tablets and two finger touch devices. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-15Input: at32psif - do not sleep in atomic contextDmitry Torokhov
We can't use msleep() while holding a spinlock, moreower serio's write() method is supposed to be useable from inettrupt context. Let's do what i8042 does and poll the status register every 50 us (with udelay). Reported-by: Marjan Fojkar <marjan@pajkc.eu> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-15Input: i8042 - add Gigabyte M1022M to the noloop listDmitry Torokhov
Gigabyte netbook model M1022M requires i8042.noloop, otherwise AUX port will not detected and the touchpad will not work. Unfortunately chassis type in DMI set to "Other" and thus generic laptop entry does not fire on it. Reported-by: Darryl Bond <dbond@nrggos.com.au> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-13mfd: Rename all twl4030_i2c*Balaji T K
This patch renames function names like twl4030_i2c_write_u8, twl4030_i2c_read_u8 to twl_i2c_write_u8, twl_i2c_read_u8 and also common variable in twl-core.c Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Rename twl4030* driver files to enable re-useSantosh Shilimkar
The upcoming TWL6030 is companion chip for OMAP4 like the current TWL4030 for OMAP3. The common modules like RTC, Regulator creates opportunity to re-use the most of the code from twl4030. This patch renames few common drivers twl4030* files to twl* to enable the code re-use. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Fix memleak in pcf50633_client_dev_registerLars-Peter Clausen
Since platform_device_add_data copies the passed data, the allocated subdev_pdata is never freed. A simple fix would be to either free subdev_pdata or put it onto the stack. But since the pcf50633 child devices can rely on beeing children of the pcf50633 core device it's much more elegant to get access to pcf50633 core structure through that link. This allows to get completly rid of pcf5033_subdev_pdata. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13input/keyboard: new driver for ADP5520 MFD PMICsMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 11:14:41 +0000