summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2020-06-17maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofaultChristoph Hellwig
Better describe what these functions do. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for the Azoteq IQS269A capacitive touch controller - a new driver for the Cypress CY8CTMA140 touchscreen - updates to Elan and ft5x06 touchscreen drivers - assorted driver fixes - msm-vibrator has been removed as we have a more generic solution * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (28 commits) Input: adi - work around module name confict Input: iqs269a - add missing I2C dependency Input: elants - refactor elants_i2c_execute_command() Input: elants - override touchscreen info with DT properties Input: elants - remove unused axes Input: add support for Azoteq IQS269A dt-bindings: input: Add bindings for Azoteq IQS269A Input: imx_sc_key - use devm_add_action_or_reset() to handle all cleanups Input: remove msm-vibrator driver dt-bindings: Input: remove msm-vibrator Input: elants_i2c - provide an attribute to show calibration count Input: introduce input_mt_report_slot_inactive() dt-bindings: input: touchscreen: elants_i2c: convert to YAML Input: add driver for the Cypress CY8CTMA140 touchscreen dt-bindings: touchscreen: Add CY8CTMA140 bindings Input: edt-ft5x06 - prefer asynchronous probe Input: edt-ft5x06 - improve power management operations Input: edt-ft5x06 - move parameter restore into helper Input: edt-ft5x06 - fix get_default register write access Input: atkbd - receive and use physcode->keycode mapping from FW ...
2020-06-09Input: adi - work around module name confictArnd Bergmann
Making module name conflicts a fatal error breaks sparc64 allmodconfig: Error log: error: the following would cause module name conflict: drivers/char/adi.ko drivers/input/joystick/adi.ko Renaming one of the modules would solve the problem, but then cause other problems because neither of them is automatically loaded and changing the name is likely to break any setup that relies on manually loading it by name. As there is probably no sparc64 system with this kind of ancient joystick attached, work around it by adding a Kconfig dependency that forbids them from both being modules. It is still possible to build the joystick driver if the sparc64 adi driver is built-in. Reported-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200609100643.1245061-1-arnd@arndb.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-06-06Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 5.8 merge window.
2020-06-05Merge tag 'powerpc-5.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Support for userspace to send requests directly to the on-chip GZIP accelerator on Power9. - Rework of our lockless page table walking (__find_linux_pte()) to make it safe against parallel page table manipulations without relying on an IPI for serialisation. - A series of fixes & enhancements to make our machine check handling more robust. - Lots of plumbing to add support for "prefixed" (64-bit) instructions on Power10. - Support for using huge pages for the linear mapping on 8xx (32-bit). - Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver. - Removal of some obsolete 40x platforms and associated cruft. - Initial support for booting on Power10. - Lots of other small features, cleanups & fixes. Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram Sang, Xiongfeng Wang. * tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits) powerpc/pseries: Make vio and ibmebus initcalls pseries specific cxl: Remove dead Kconfig options powerpc: Add POWER10 architected mode powerpc/dt_cpu_ftrs: Add MMA feature powerpc/dt_cpu_ftrs: Enable Prefixed Instructions powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected powerpc: Add support for ISA v3.1 powerpc: Add new HWCAP bits powerpc/64s: Don't set FSCR bits in INIT_THREAD powerpc/64s: Save FSCR to init_task.thread.fscr after feature init powerpc/64s: Don't let DT CPU features set FSCR_DSCR powerpc/64s: Don't init FSCR_DSCR in __init_FSCR() powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations powerpc/module_64: Consolidate ftrace code powerpc/32: Disable KASAN with pages bigger than 16k powerpc/uaccess: Don't set KUEP by default on book3s/32 powerpc/uaccess: Don't set KUAP by default on book3s/32 powerpc/8xx: Reduce time spent in allow_user_access() and friends ...
2020-05-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just a few random driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - add a second working PNP_ID for Lenovo T470s Input: applespi - replace zero-length array with flexible-array Input: axp20x-pek - always register interrupt handlers Input: lm8333 - update contact email Input: synaptics-rmi4 - fix error return code in rmi_driver_probe() Input: synaptics-rmi4 - really fix attn_data use-after-free Input: i8042 - add ThinkPad S230u to i8042 reset list Revert "Input: i8042 - add ThinkPad S230u to i8042 nomux list" Input: dlink-dir685-touchkeys - fix a typo in driver name Input: xpad - add custom init packet for Xbox One S controllers Input: evdev - call input_flush_device() on release(), not flush() Input: i8042 - add ThinkPad S230u to i8042 nomux list Input: usbtouchscreen - add support for BonXeon TP Input: cros_ec_keyb - use cros_ec_cmd_xfer_status helper Input: mms114 - fix handling of mms345l Input: elants_i2c - support palm detection
2020-05-28input: i8042 - Remove special PowerPC handlingNathan Chancellor
This causes a build error with CONFIG_WALNUT because kb_cs and kb_data were removed in commit 917f0af9e5a9 ("powerpc: Remove arch/ppc and include/asm-ppc"). ld.lld: error: undefined symbol: kb_cs > referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28) > input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a > referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28) > input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a > referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28) > input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a ld.lld: error: undefined symbol: kb_data > referenced by i8042.c:309 (drivers/input/serio/i8042.c:309) > input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a > referenced by i8042-ppcio.h:33 (drivers/input/serio/i8042-ppcio.h:33) > input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a > referenced by i8042.c:319 (drivers/input/serio/i8042.c:319) > input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a > referenced 15 more times Presumably since nobody has noticed this for the last 12 years, there is not anyone actually trying to use this driver so we can just remove this special walnut code and use the generic header so it builds for all configurations. Fixes: 917f0af9e5a9 ("powerpc: Remove arch/ppc and include/asm-ppc") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20200518181043.3363953-1-natechancellor@gmail.com
2020-05-26Input: synaptics - add a second working PNP_ID for Lenovo T470sDennis Kadioglu
The Lenovo Thinkpad T470s I own has a different touchpad with "LEN007a" instead of the already included PNP ID "LEN006c". However, my touchpad seems to work well without any problems using RMI. So this patch adds the other PNP ID. Signed-off-by: Dennis Kadioglu <denk@eclipso.email> Link: https://lore.kernel.org/r/ff770543cd53ae818363c0fe86477965@mail.eclipso.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-18Input: iqs269a - add missing I2C dependencyJeff LaBundy
If CONFIG_INPUT_IQS269A is selected yet CONFIG_I2C is not, the build fails. To solve this problem, add I2C as a dependency. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reported-by: kbuild test robot <lkp@intel.com> Fixes: 04e49867fad1 ("Input: add support for Azoteq IQS269A") Link: https://lore.kernel.org/r/1589809466-22748-1-git-send-email-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-17Input: elants - refactor elants_i2c_execute_command()Michał Mirosław
Apply some DRY-ing to elants_i2c_execute_command() callers. This pulls polling and error printk()s into a single function. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/6c576f688b385235c65b461410a917080d27e825.1587923061.git.mirq-linux@rere.qmqm.pl Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-17Input: elants - override touchscreen info with DT propertiesMichał Mirosław
Allow overriding of information from hardware and support additional common DT properties like axis inversion. This is required for eg. Nexus 7 and TF300T where the programmed values in firmware differ from reality. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [moved "prop" before DMA buffer] Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/49ea996878264f7c8bde25204e4ddf4b1e85ae71.1587923061.git.mirq-linux@rere.qmqm.pl Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-17Input: elants - remove unused axesMichał Mirosław
Driver only ever reports MT events and input_mt_init_slots() sets up emulated axes already. Clear the capabilities not generated directly and move MT axes setup, so they are visible by input_mt_init_slots(). Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/d5eee8cd305adb144a11264d70da94f7b6570366.1587923061.git.mirq-linux@rere.qmqm.pl Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-17Merge branch 'for-linus' into nextDmitry Torokhov
Merge for-linus branch to sync Elan touchscreen driver code.
2020-05-17Input: add support for Azoteq IQS269AJeff LaBundy
This patch adds support for the Azoteq IQS269A capacitive touch controller. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/1588352982-5117-2-git-send-email-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-13Input: imx_sc_key - use devm_add_action_or_reset() to handle all cleanupsAnson Huang
Use devm_add_action_or_reset() to handle all cleanups of failure in .probe and .remove, then .remove callback can be dropped. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Link: https://lore.kernel.org/r/1584082751-17047-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-13Input: remove msm-vibrator driverBrian Masney
The address referenced by this driver is within the Qualcomm Clock namespace so let's drop the msm-vibrator bindings so that a more generic solution can be used instead. No one is currently using driver so this won't affect any users. Signed-off-by: Brian Masney <masneyb@onstation.org> Link: https://lore.kernel.org/r/20200513013140.69935-3-masneyb@onstation.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-12Input: elants_i2c - provide an attribute to show calibration countJohnny Chuang
There is an non-touch case by non-calibration after update firmware. Elan could know calibrate or not by calibration count. The value of '0xffff' means we didn't calibrate after update firmware. If calibrate success, it will plus one and change to '0x0000'. Signed-off-by: Johnny Chuang <johnny.chuang@emc.com.tw> Link: https://lore.kernel.org/r/1588754932-5902-1-git-send-email-johnny.chuang.emc@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-12Input: introduce input_mt_report_slot_inactive()Jiada Wang
input_mt_report_slot_state() ignores "tool" argument when the slot is closed, which has caused a bit of confusion. Let's introduce input_mt_report_slot_inactive() to report inactive slot state. Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Link: https://lore.kernel.org/r/20200508055656.96389-2-jiada_wang@mentor.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-12Merge tag 'v5.6' into nextDmitry Torokhov
Sync up with mainline to get device tree and other changes.
2020-05-09Input: add driver for the Cypress CY8CTMA140 touchscreenLinus Walleij
This adds a new driver for the Cypress CY8CTMA140 touchscreen. This driver is inspired by out-of-tree code for the Samsung GT-S7710 mobile phone. I have tried to compare the structure and behaviour of this touchscreen to the existing CYTTSP and CYTTSP4 generics and it seems pretty different. It is also different in character from the cy8ctmg110_ts.c. It appears to rather be vaguely related to the Melfas MMS114 driver, yet distinctly different. Dmitry Torokhov rewrote the key scanning code during the submission process so the driver is a joint work. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200506123435.187432-2-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-09Input: applespi - replace zero-length array with flexible-arrayGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200507185347.GA14499@embeddedor Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-09Input: edt-ft5x06 - prefer asynchronous probeAhmad Fatoum
Probing the device takes a while, because we sleep for 300 ms after a reset; allow asynchronous probing so this can happen in the background while other devices are being probed. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20200227112819.16754-5-m.felsch@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-09Input: edt-ft5x06 - improve power management operationsMarco Felsch
It is possible to bring the device into a deep sleep state. To exit this state the reset or wakeup pin must be toggeled as documented in [1]. Because of the poor documentation I used the several downstream kernels [2] and other applications notes [3] to indentify the related registers. Furthermore I added the support to disable the device completely which is obviously the most effective power-saving mechanism. This mechanism needs the reset pin to ensure the power-up/down sequence. We can't apply any of these power-saving mechanism if both pins are missing (not connected) or if it is a wakeup device. [1] https://www.newhavendisplay.com/appnotes/datasheets/touchpanel/FT5x26.pdf https://www.newhavendisplay.com/appnotes/datasheets/touchpanel/FT5x06.pdf [2] https://github.com/linux-sunxi/linux-sunxi/blob/sunxi-3.4/drivers/input/touchscreen/ft5x_ts.c https://github.com/Pablito2020/focaltech-touch-driver/blob/master/ft5336_driver.c [3] https://www.newhavendisplay.com/appnotes/datasheets/touchpanel/FT5x16_registers.pdf Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20200227112819.16754-4-m.felsch@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-09Input: edt-ft5x06 - move parameter restore into helperMarco Felsch
We need to restore the parameters if we switch between the factory/work mode and during the resume process if we switched off the power-supply. Therefore refactor edt_ft5x06_work_mode() and move the "restore the parameters" into a helper routine so we can reuse it later. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20200227112819.16754-3-m.felsch@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-09Input: edt-ft5x06 - fix get_default register write accessMarco Felsch
Since commit b6eba86030bf ("Input: edt-ft5x06 - add offset support for ev-ft5726") offset-x and offset-y is supported. Devices using those offset parameters don't support the offset parameter so we need to add the NO_REGISTER check for edt_ft5x06_ts_get_defaults(). Fixes: b6eba86030bf ("Input: edt-ft5x06 - add offset support for ev-ft5726") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20200227112819.16754-2-m.felsch@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-05Input: axp20x-pek - always register interrupt handlersHans de Goede
On some X86 devices we do not register an input-device, because the power-button is also handled by the soc_button_array (GPIO) input driver, and we want to avoid reporting power-button presses to userspace twice. Sofar when we did this we also did not register our interrupt handlers, since those were only necessary to report input events. But on at least 2 device models the Medion Akoya E1239T and the GPD win, the GPIO pin used by the soc_button_array driver for the power-button cannot wakeup the system from suspend. Why this does not work is not clear, I've tried comparing the value of all relevant registers on the Cherry Trail SoC, with those from models where this does work. I've checked: PMC registers: FUNC_DIS, FUNC_DIS2, SOIX_WAKE_EN, D3_STS_0, D3_STS_1, D3_STDBY_STS_0, D3_STDBY_STS_1; PMC ACPI I/O regs: PM1_STS_EN, GPE0a_EN and they all have identical contents in the working and non working cases. I suspect that the firmware either sets some unknown register to a value causing this, or that it turns off a power-plane which is necessary for GPIO wakeups to work during suspend. What does work on the Medion Akoya E1239T is letting the AXP288 wakeup the system on a power-button press (the GPD win has a different PMIC). Move the registering of the power-button press/release interrupt-handler from axp20x_pek_probe_input_device() to axp20x_pek_probe() so that the PMIC will wakeup the system on a power-button press, even if we do not register an input device. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20200426155757.297087-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-28Input: synaptics-rmi4 - fix error return code in rmi_driver_probe()Wei Yongjun
Fix to return a negative error code from the input_register_device() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20200428134948.78343-1-weiyongjun1@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-27Input: synaptics-rmi4 - really fix attn_data use-after-freeEvan Green
Fix a use-after-free noticed by running with KASAN enabled. If rmi_irq_fn() is run twice in a row, then rmi_f11_attention() (among others) will end up reading from drvdata->attn_data.data, which was freed and left dangling in rmi_irq_fn(). Commit 55edde9fff1a ("Input: synaptics-rmi4 - prevent UAF reported by KASAN") correctly identified and analyzed this bug. However the attempted fix only NULLed out a local variable, missing the fact that drvdata->attn_data is a struct, not a pointer. NULL out the correct pointer in the driver data to prevent the attention functions from copying from it. Fixes: 55edde9fff1a ("Input: synaptics-rmi4 - prevent UAF reported by KASAN") Fixes: b908d3cd812a ("Input: synaptics-rmi4 - allow to add attention data") Signed-off-by: Evan Green <evgreen@chromium.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200427145537.1.Ic8f898e0147beeee2c005ee7b20f1aebdef1e7eb@changeid Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-27Input: i8042 - add ThinkPad S230u to i8042 reset listKevin Locke
On the Lenovo ThinkPad Twist S230u (3347-4HU) with BIOS version "GDETC1WW (1.81 ) 06/27/2019", the keyboard, Synaptics TouchPad, and TrackPoint either do not function or stop functioning a few minutes after boot. This problem has been noted before, perhaps only occurring with BIOS 1.57 and later.[1][2][3][4][5] Odds of a BIOS fix appear to be low: 1.57 was released over 6 years ago and although the [BIOS changelog] notes "Fixed an issue of UEFI touchpad/trackpoint/keyboard/touchscreen" in 1.58, it appears to be insufficient. Setting i8042.reset=1 or adding 33474HU to the reset list avoids the issue on my system from either warm or cold boot. [1]: https://bugs.launchpad.net/bugs/1210748 [2]: https://bbs.archlinux.org/viewtopic.php?pid=1360425 [3]: https://forums.linuxmint.com/viewtopic.php?f=46&t=41200 [4]: https://forums.linuxmint.com/viewtopic.php?f=49&t=157115 [5]: https://forums.lenovo.com/topic/findpost/27/1337119 [BIOS changelog]: https://download.lenovo.com/pccbbs/mobiles/gduj33uc.txt Signed-off-by: Kevin Locke <kevin@kevinlocke.name> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/94f384b0f75f90f71425d7dce7ac82c59ddb87a8.1587702636.git.kevin@kevinlocke.name Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-27Revert "Input: i8042 - add ThinkPad S230u to i8042 nomux list"Dmitry Torokhov
This reverts commit 18931506465a762ffd3f4803d36a18d336a67da9. From Kevin Locke: "... nomux only appeared to fix the issue because the controller continued working after warm reboots. After more thorough testing from both warm and cold start, I now believe the entry should be added to i8042_dmi_reset_table rather than i8042_dmi_nomux_table as i8042.reset=1 alone is sufficient to avoid the issue from both states while i8042.nomux is not."
2020-04-27Input: atkbd - receive and use physcode->keycode mapping from FWRajat Jain
Allow the firmware to specify the mapping between the scan code and the linux keycode. This takes the form of a "linux,keymap" property which is an array of u32 values, each value specifying mapping for a key. Signed-off-by: Rajat Jain <rajatja@google.com> Link: https://lore.kernel.org/r/20200427210259.91330-3-rajatja@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-27Input: atkbd - expose function row physical map to userspaceRajat Jain
Certain keyboards have their top-row keys intended for actions such as "Browser back", "Browser Refresh", "Fullscreen" etc as their primary mode, thus they will send scan codes for those actions. Further, they don't have a dedicated "Fn" key so don't have the capability to generate function key codes (e.g. F1, F2 etc..). However in this case, if userspace still wants to "synthesize" those function keys using the top row action keys, it needs to know the physical position of the top row keys. (Essentially a mapping between usage codes and a physical location in the top row). This patch enhances the atkbd driver to receive such a mapping from the firmware / device tree, and expose it to userspace in the form of a function-row-physmap attribute. The attribute would be a space separated ordered list of physical codes, for the keys in the function row, in left-to-right order. The attribute will only be present if the kernel knows about such mapping, otherwise the attribute shall not be visible. Signed-off-by: Rajat Jain <rajatja@google.com> Link: https://lore.kernel.org/r/20200427210259.91330-2-rajatja@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-27Input: i8042 - attach fwnode to serio i8042 kbd deviceRajat Jain
Attach the firmware node to the serio i8042 kbd device so that device properties can be passed from the firmware. Signed-off-by: Rajat Jain <rajatja@google.com> Link: https://lore.kernel.org/r/20200427210259.91330-1-rajatja@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-25Input: mms114 - add extra compatible for mms345lStephan Gerhold
MMS345L is another first generation touch screen from Melfas, which uses mostly the same registers as MMS152. However, there is some garbage printed during initialization. Apparently MMS345L does not have the MMS152_COMPAT_GROUP register that is read+printed during initialization. TSP FW Rev: bootloader 0x6 / core 0x26 / config 0x26, Compat group: \x06 On earlier kernel versions the compat group was actually printed as an ASCII control character, seems like it gets escaped now. But we probably shouldn't print something from a random register. Add a separate "melfas,mms345l" compatible that avoids reading from the MMS152_COMPAT_GROUP register. This might also help in case there is some other device-specific quirk in the future. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Andi Shyti <andi@etezian.org> Link: https://lore.kernel.org/r/20200423102431.2715-1-stephan@gerhold.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-22Input: dlink-dir685-touchkeys - fix a typo in driver nameChristophe JAILLET
According to the file name and Kconfig, a 'k' is missing in this driver name. It should be "dlink-dir685-touchkeys". Fixes: 131b3de7016b ("Input: add D-Link DIR-685 touchkeys driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200412213937.5287-1-christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-22Input: xpad - add custom init packet for Xbox One S controllersŁukasz Patron
Sending [ 0x05, 0x20, 0x00, 0x0f, 0x06 ] packet for Xbox One S controllers fixes an issue where controller is stuck in Bluetooth mode and not sending any inputs. Signed-off-by: Łukasz Patron <priv.luk@gmail.com> Reviewed-by: Cameron Gutman <aicommander@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200422075206.18229-1-priv.luk@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-22Input: evdev - call input_flush_device() on release(), not flush()Brendan Shanks
input_flush_device() should only be called once the struct file is being released and no open descriptors remain, but evdev_flush() was calling it whenever a file descriptor was closed. This caused uploaded force-feedback effects to be erased when a process did a dup()/close() on the event FD, called system(), etc. Call input_flush_device() from evdev_release() instead. Reported-by: Mathieu Maret <mathieu.maret@gmail.com> Signed-off-by: Brendan Shanks <bshanks@codeweavers.com> Link: https://lore.kernel.org/r/20200421231003.7935-1-bshanks@codeweavers.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-20Input: i8042 - add ThinkPad S230u to i8042 nomux listKevin Locke
On the Lenovo ThinkPad Twist S230u (3347-4HU) with BIOS version "GDETC1WW (1.81 ) 06/27/2019", whether booted in UEFI or Legacy/CSM mode the keyboard, Synaptics TouchPad, and TrackPoint either do not function or stop functioning a few minutes after boot. This problem has been noted before, perhaps only occurring on BIOS 1.57 and later.[1][2][3][4][5] This model does not have an external PS/2 port, so mux does not appear to be useful. Odds of a BIOS fix appear to be low: 1.57 was released over 6 years ago and although the [BIOS changelog] notes "Fixed an issue of UEFI touchpad/trackpoint/keyboard/touchscreen" in 1.58, it appears to be insufficient. Adding 33474HU to the nomux list avoids the issue on my system. [1]: https://bugs.launchpad.net/bugs/1210748 [2]: https://bbs.archlinux.org/viewtopic.php?pid=1360425 [3]: https://forums.linuxmint.com/viewtopic.php?f=46&t=41200 [4]: https://forums.linuxmint.com/viewtopic.php?f=49&t=157115 [5]: https://forums.lenovo.com/topic/findpost/27/1337119 [BIOS changelog]: https://download.lenovo.com/pccbbs/mobiles/gduj33uc.txt Signed-off-by: Kevin Locke <kevin@kevinlocke.name> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/feb8a8339a67025dab3850e6377eb6f3a0e782ba.1587400635.git.kevin@kevinlocke.name Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-19Input: delete unused GP2AP002A00F driverLinus Walleij
There is now an IIO driver for GP2AP002A00F and GP2AP002S00F in drivers/iio/light/gp2ap002.c. Delete this driver, it is unused in the kernel tree and new users can make use of the IIO driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200417203059.8151-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-18Input: evdev - use keyed wakeupsKenny Levinsen
Some processes, such as systemd, are only polling for EPOLLERR|EPOLLHUP. As evdev uses unkeyed wakeups, such a poll receives many spurious wakeups from uninteresting events. Use keyed wakeups to allow the wakeup target to more efficiently discard these uninteresting events. Signed-off-by: Kenny Levinsen <kl@kl.wtf> Link: https://lore.kernel.org/r/20200410233557.3892-1-kl@kl.wtf Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-18Input: spear-keyboard - fix a typo in a module name in KconfigChristophe JAILLET
A 'y' is missing in spear-keyboard. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20200412095711.9107-1-christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-18Input: tca6416-keypad - fix a typo in MODULE_DESCRIPTIONChristophe JAILLET
This should be 'tca6416', not 'tca6146' Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20200413152329.4435-1-christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-18Input: usbtouchscreen - add support for BonXeon TPJames Hilliard
Based on available information this uses the singletouch irtouch protocol. This is tested and confirmed to be fully functional on the BonXeon TP hardware I have. Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Link: https://lore.kernel.org/r/20200413184217.55700-1-james.hilliard1@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-18Input: cros_ec_keyb - use cros_ec_cmd_xfer_status helperEnric Balletbo i Serra
This patch makes use of cros_ec_cmd_xfer_status() instead of cros_ec_cmd_xfer(). In this case there is no advantage of doing this apart from that we want to make cros_ec_cmd_xfer() a private function for the EC protocol and let people only use the cros_ec_cmd_xfer_status() to return Linux standard error codes. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20200414210434.1534982-1-enric.balletbo@collabora.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-14Input: mms114 - fix handling of mms345lStephan Gerhold
MMS345L is another first generation touch screen from Melfas, which uses the same registers as MMS152. However, using I2C_M_NOSTART for it causes errors when reading: i2c i2c-0: sendbytes: NAK bailout. mms114 0-0048: __mms114_read_reg: i2c transfer failed (-5) The driver works fine as soon as I2C_M_NOSTART is removed. Reviewed-by: Andi Shyti <andi@etezian.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200405170904.61512-1-stephan@gerhold.net [dtor: removed separate mms345l handling, made everyone use standard transfer mode, propagated the 10bit addressing flag to the read part of the transfer as well.] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-14Input: elants_i2c - support palm detectionJohnny Chuang
Elan uses the least significant bit of byte 33 to signal the type of contact (finger versus palm). The default value is 1 for all firmwares, which is reported as MT_TOOL_FINGER. If firmware supports palm detection, the bit will change to 0 and the driver will report such contact as MT_TOOL_PALM. Signed-off-by: Johnny Chuang <johnny.chuang@emc.com.tw> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Link: https://lore.kernel.org/r/1585551756-29066-1-git-send-email-johnny.chuang.emc@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "An update to the Goodix touchscreen driver to enable it work properly on various Bay Trail and Cherry Trail devices, and a few other assorted changes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits) Input: update SPDX tag for input-event-codes.h Input: i8042 - add Acer Aspire 5738z to nomux list Input: goodix - fix compilation when ACPI support is disabled dt-bindings: touchscreen: Convert edt-ft5x06 to json-schema Input: of_touchscreen - explicitly choose axis Input: goodix - support gt9147 touchpanel dt-bindings: touchscreen: goodix: support of gt9147 Input: goodix - add support for Goodix GT917S Input: goodix - use string-based chip ID dt-bindings: input: touchscreen: add compatible string for Goodix GT917S Input: goodix - add support for more then one touch-key Input: goodix - fix spurious key release events Input: goodix - try to reset the controller if the i2c-test fails Input: goodix - restore config on resume if necessary Input: goodix - make goodix_send_cfg() take a raw buffer as argument Input: goodix - add minimum firmware size check Input: goodix - save a copy of the config from goodix_read_config() Input: goodix - move defines to above struct goodix_ts_data declaration Input: goodix - add support for controlling the IRQ pin through ACPI methods Input: goodix - add support for getting IRQ + reset GPIOs on Bay Trail devices ...
2020-04-07Merge tag 'mfd-next-5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull mfd updates from Lee Jones: "New Drivers: - Add support for IQS620A/621/622/624/625 Azoteq IQS62X Sensors New Device Support: - Add support for ADC, IRQ, Regulator, RTC and WDT to Ricoh RN5T618 PMIC - Add support for Comet Lake to Intel LPSS New Functionality: - Add support for Charger Detection to Spreadtrum SC27xx PMICs - Add support for Interrupt Polarity to Dialog Semi DA9062/61 PMIC - Add ACPI enumeration support to Diolan DLN2 USB Adaptor Fix-ups: - Device Tree; iqs62x, rn5t618, cros_ec_dev, stm32-lptimer, rohm,bd71837, rohm,bd71847 - I2C registration; rn5t618 - Kconfig; MFD_CPCAP, AB8500_CORE, MFD_WM8994, MFD_WM97xx, MFD_STPMIC1 - Use flexible-array members; omap-usb-tll, qcom-pm8xxx - Remove unnecessary casts; omap-usb-host, omap-usb-tll - Power (suspend/resume/poweroff) enhancements; rk808 - Improve error/sanity checking; dln2 - Use snprintf(); aat2870-core Bug Fixes: - Fix PCI IDs in intel-lpss-pci" * tag 'mfd-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (33 commits) mfd: intel-lpss: Fix Intel Elkhart Lake LPSS I2C input clock mfd: aat2870: Use scnprintf() for avoiding potential buffer overflow mfd: dln2: Allow to be enumerated via ACPI mfd: da9062: Add support for interrupt polarity defined in device tree dt-bindings: bd718x7: Yamlify and add BD71850 mfd: dln2: Fix sanity checking for endpoints mfd: intel-lpss: Add Intel Comet Lake PCH-V PCI IDs mfd: sc27xx: Add USB charger type detection support dt-bindings: mfd: Document STM32 low power timer bindings mfd: rk808: Convert RK805 to shutdown/suspend hooks mfd: rk808: Reduce shutdown duplication mfd: rk808: Stop using syscore ops mfd: rk808: Ensure suspend/resume hooks always work mfd: rk808: Always use poweroff when requested mfd: omap: Remove useless cast for driver.name mfd: Kconfig: Fix some misspelling of the word functionality mfd: pm8xxx: Replace zero-length array with flexible-array member mfd: omap-usb-tll: Replace zero-length array with flexible-array member mfd: cpcap: Fix compile if MFD_CORE is not selected mfd: cros_ec: Check DT node for usbpd-notify add ...
2020-04-06Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 5.7 merge window.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 07:25:41 +0000