summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2012-11-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "This fixes recent regression where /dev/input/mice got assigned wrong device node which messed up setups with static /dev, and a regression in ads7846 GPIO debounce setup." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: ARM - OMAP: ads7846: fix pendown debounce setting Input: ads7846 - enable pendown GPIO debounce time setting Input: mousedev - move /dev/input/mice to the correct minor Input: MT - document new 'flags' argument of input_mt_init_slots()
2012-11-21Input: ads7846 - enable pendown GPIO debounce time settingIgor Grinberg
Some platforms need the pendown GPIO debounce time setting programmed. Since the pendown GPIO is handled by the driver, the debounce time should also be handled along with the pendown GPIO request. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-18Input: mousedev - move /dev/input/mice to the correct minorDmitry Torokhov
When doing conversion to dynamic input numbers I inadvertently moved /dev/input/mice from c,13,63 to c,13,31. We need to fix this so that setups with statically populated /dev continue working. Tested-by: Krzysztof Mazur <krzysiek@podlesie.net> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-10Input: MT - document new 'flags' argument of input_mt_init_slots()Henrik Rydberg
Fixes new kernel-doc warning in input-mt.c: Warning(drivers/input/input-mt.c:38): No description found for parameter 'flags' Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "Just a few driver fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: tsc40 - remove wrong announcement of pressure support Input: lpc32xx-keys - select INPUT_MATRIXKMAP Input: pxa27x_keypad - clear pending interrupts on keypad config Input: wacom - correct bad Cintiq 24HD check Input: wacom - add INPUT_PROP_DIRECT flag to Cintiq 24HD Input: egalax_ts - get gpio from devicetree
2012-11-02Merge tag 'stable/for-linus-3.7-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bugfixes from Konrad Rzeszutek Wilk: - Use appropriate macros instead of hand-rolling our own (ARM). - Fixes if FB/KBD closed unexpectedly. - Fix memory leak in /dev/gntdev ioctl calls. - Fix overflow check in xenbus_file_write. - Document cleanup. - Performance optimization when migrating guests. * tag 'stable/for-linus-3.7-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/mmu: Use Xen specific TLB flush instead of the generic one. xen/arm: use the __HVC macro xen/xenbus: fix overflow check in xenbus_file_write() xen-kbdfront: handle backend CLOSED without CLOSING xen-fbfront: handle backend CLOSED without CLOSING xen/gntdev: don't leak memory from IOCTL_GNTDEV_MAP_GRANT_REF x86: remove obsolete comment from asm/xen/hypervisor.h
2012-10-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: "This contains fixes for two devices by Jiri Slaby and Xianhan Yu, new device IDs for MacBook Pro 10,2 from Dirk Hohndel and generic multitouch code fix from Alan Cox." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Add support for the MacBook Pro 10,2 keyboard / touchpad HID: multitouch: fix maxcontacts problem on GeneralTouch HID: multitouch: put the case in the right switch statement HID: microsoft: fix invalid rdesc for 3k kbd
2012-10-31HID: Add support for the MacBook Pro 10,2 keyboard / touchpadDirk Hohndel
This enables the existing drivers for keyboard and touchpad with the new USB IDs found on the MBP 13" Reasonable Resolution (also known as the Retina Display). Added entries to both keyboard and mouse ignore lists. Signed-off-by: Dirk Hohndel <dirk@hohndel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-30Input: tsc40 - remove wrong announcement of pressure supportRolf Eike Beer
The tsc40 driver announces it supports the pressure event, but will never send one. The announcement will cause tslib to wait for such events and sending all touch events with a pressure of 0. Removing the announcement will make tslib fall back to emulating the pressure on touch events so everything works as expected. Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-30xen-kbdfront: handle backend CLOSED without CLOSINGDavid Vrabel
Backend drivers shouldn't transistion to CLOSED unless the frontend is CLOSED. If a backend does transition to CLOSED too soon then the frontend may not see the CLOSING state and will not properly shutdown. So, treat an unexpected backend CLOSED state the same as CLOSING. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-30Input: lpc32xx-keys - select INPUT_MATRIXKMAPRoland Stigge
This adds a "select" dependency of KEYBOARD_LPC32XX on INPUT_MATRIXKMAP, as the other drivers are doing in this regard. This fixes the following compile error if KEYBOARD_LPC32XX is enabled but INPUT_MATRIXKMAP is not: drivers/input/keyboard/lpc32xx-keys.c:230: undefined reference to `matrix_keypad_build_keymap' Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-30Input: pxa27x_keypad - clear pending interrupts on keypad configVasily Khoruzhick
Bootloader can leave interrupt bit pending, and it confuses driver. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-30Input: wacom - correct bad Cintiq 24HD checkJason Gerecke
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-30Merge tag 'v3.7-rc3' into for-linus to sync up with recent USB changesDmitry Torokhov
2012-10-25Input: wacom - add touch sensor support for Cintiq 24HD touchJason Gerecke
Decode multitouch reports from the touch sensor of the Cintiq 24HD touch. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-25Input: wacom - handle split-sensor devices with internal hubsJason Gerecke
Like our other pen-and-touch products, the Cintiq 24HD touch needs data to be shared between its two sensors to facilitate proximity-based palm rejection. Unlike other tablets that report sensor data through separate interfaces of the same USB device, the Cintiq 24HD touch has separate USB devices that are connected to an internal USB hub. This patch makes it possible to designate the USB VID/PID of the other device so that the two may share data. To ensure we don't accidentally link to a sensor from a physically separate device (if several have been plugged in), we limit the search to siblings (i.e., devices directly connected to the same hub). Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-25Input: wacom - add INPUT_PROP_DIRECT flag to Cintiq 24HDJason Gerecke
Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-25Input: egalax_ts - get gpio from devicetreeHui Wang
The irq_to_gpio() is old, most platforms use GENERIC_GPIO framework and don't support this API anymore. The i.MX6q sabrelite platform equips an egalax touchscreen controller, and this platform already transfered to GENERIC_GPIO framework, to support this driver, we use a more generic way to get gpio. Add a return value checking for waking up the controller in the probe function, this guarantee only a workable device can pass init. [dmitry.torokhov@gmail.com: Make driver depend on CONFIG_OF as it is now required.] Acked-by Zhang Jiejing <jiejing.zhang@freescale.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-22Input: fix use-after-free introduced with dynamic minor changesDmitry Torokhov
Commit 7f8d4cad1e4e ("Input: extend the number of event (and other) devices") made evdev, joydev and mousedev to embed struct cdev into their respective structures representing input devices. Unfortunately character device structure may outlive the parent structure unless we do not set it up as parent of character device so that it will stay pinned until character device is freed. Also, now that parent structure is pinned while character device exists we do not need to pin and unpin it every time user opens or closes it. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer updates from Dmitry Torokhov: "2nd round of updates for the input subsystem. With it input core no longer limits number of character devices per event handler (such as evdev) to 32, but switches to dynamic minors once legacy range is exhausted. This should get multi-seat installations that currently run our of event devices very quickly. You will also get an update for Wacom driver and a couple of driver fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: extend the number of event (and other) devices Input: mousedev - mark mousedev interfaces as non-seekable Input: mousedev - rename mixdev_open to opened_by_mixdev Input: mousedev - reformat structure initializers Input: mousedev - factor out psaux code to reduce #ifdefery Input: samsung-keypad - add clk_prepare and clk_unprepare Input: atmel_mxt_ts - simplify mxt_dump_message Input: wacom - clean up wacom_query_tablet_data Input: wacom - introduce wacom_fix_phy_from_hid Input: wacom - allow any multi-input Intuos device to set prox Input: wacom - report correct touch contact size for I5/Bamboo
2012-10-11Merge branch 'next' into for-linusDmitry Torokhov
Prepare second set of updates for 3.7 merge window (Wacom driver update and patches extending number of input minors).
2012-10-08Input: extend the number of event (and other) devicesDmitry Torokhov
Extend the amount of character devices, such as eventX, mouseX and jsX, from a hard limit of 32 per input handler to about 1024 shared across all handlers. To be compatible with legacy installations input handlers will start creating char devices with minors in their legacy range, however once legacy range is exhausted they will start allocating minors from the dynamic range 256-1024. Reviewed-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-08Input: mousedev - mark mousedev interfaces as non-seekableDmitry Torokhov
Seeking does not make sense for mousedev, so let's use nonseekable_open() to mark its devices as non-seekable. Reviewed-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-08Input: mousedev - rename mixdev_open to opened_by_mixdevDmitry Torokhov
Do the rename to make the logic more clear and also change it to bool while at it. Reviewed-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-08Input: mousedev - reformat structure initializersDmitry Torokhov
Reformat structure initializers to match the rest of input handlers Reviewed-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-08Input: mousedev - factor out psaux code to reduce #ifdeferyDmitry Torokhov
Reviewed-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-08Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pul ACPI & Power Management updates from Len Brown: - acpidump utility added - intel_idle driver now supports IVB Xeon - turbostat utility can now count SMIs - ACPI can now bind to USB3 hubs - misc fixes * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (49 commits) ACPI: Add new sysfs interface to export device description ACPI: Harden acpi_table_parse_entries() against BIOS bug tools/power/turbostat: add option to count SMIs, re-name some options tools/power turbostat: add [-d MSR#][-D MSR#] options to print counter deltas intel_idle: enable IVB Xeon support tools/power turbostat: add [-m MSR#] option tools/power turbostat: make -M output pretty tools/power turbostat: print more turbo-limit information tools/power turbostat: delete unused line tools/power turbostat: run on IVB Xeon tools/power/acpi/acpidump: create acpidump(8), local make install targets tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfs ACPI: run _OSC after ACPI_FULL_INITIALIZATION tools/power/acpi/acpidump: create acpidump(8), local make install targets tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfs tools/power/acpi/acpidump: version 20071116 tools/power/acpi/acpidump: version 20070714 tools/power/acpi/acpidump: version 20060606 tools/power/acpi/acpidump: version 20051111 xo15-ebook: convert to module_acpi_driver() ...
2012-10-06Merge branches 'acpica', 'acpidump', 'intel-idle', 'misc', ↵Len Brown
'module_acpi_driver-simplify', 'turbostat' and 'usb3' into release add acpidump utility intel_idle driver now supports IVB Xeon turbostat can now count SMIs ACPI can now bind to USB3 hubs misc fixes
2012-10-04Input: samsung-keypad - add clk_prepare and clk_unprepareThomas Abraham
Add calls to clk_prepare and clk_unprepare as required by commom clock framework. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-04Input: atmel_mxt_ts - simplify mxt_dump_messageAndy Shevchenko
Use %*ph format specifier to print small buffer. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-04Input: wacom - clean up wacom_query_tablet_dataJason Gerecke
Rewrites this function to be easier to read and understand. The new function 'wacom_set_device_mode' now handles the grunt work of assembling the proper feature report, sending it to the device, and ensuring the setting "sticks". Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-04Input: wacom - introduce wacom_fix_phy_from_hidJason Gerecke
The Cintiq 24HD touch cannot use wacom_set_phy_from_res to determine the physical size of the touch sensor since the pen and touch are on separate USB devices. The physical size is, however, provided in the HID descriptor, just scaled to a unit we don't use. This patch introduces the function wacom_fix_phy_from_hid to let us make use of the unit and exponent data provided by HID to set the [xy]_phy variables to an appropriate value. This function relies on a trimmed-down version of hidinput_calc_abs_res from the hid-input.c. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-05Merge tag 'mfd-3.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: "MFD bits for the 3.7 merge window. As usual we have a few new drivers: - TI LP8788 - TI OMAP USB TLL - Maxim MAX8907 - SMSC ECE1099 - Dialog Semiconductor DA9055 - A simpler syscon driver that allow us to get rid of the anatop one. Drivers are also gradually getting Device Tree and IRQ domain support. The following drivers got DT support: - palmas, 88pm860x, tc3589x and twl4030-audio And those ones now use the IRQ domain APIs: - 88pm860x, tc3589x, db8500_prcmu Also some other interesting changes: - Intel's ICH LPC now supports Lynx Point - TI's twl4030-audio added a GPO child - tps6527 enabled its backlight subdevice - The twl6030 pwm driver moved to the new PWM subsystem And finally a bunch of cleanup and casual fixes for mc13xxx, 88pm860x, palmas, ab8500, wm8994, wm5110, max8907 and the tps65xxx family." Fix up various annoying conflicts: the DT and IRQ domain support came in twice and was already in 3.6. And then it was apparently rebased. Guys, DON'T REBASE! * tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (89 commits) ARM: dts: Enable 88pm860x pmic mfd: 88pm860x: Move gpadc init into touch mfd: 88pm860x: Device tree support mfd: 88pm860x: Use irqdomain mfd: smsc: Add support for smsc gpio io/keypad driver backlight: tps65217_bl: Add missing platform_set_drvdata in tps65217_bl_probe mfd: DA9055 core driver mfd: tps65910: Add alarm interrupt of TPS65910 RTC to mfd device list mfd: wm5110: Add register patches for revision B mfd: wm5110: Disable control interface error report for WM5110 rev B mfd: max8907: Remove regulator-compatible from DT docs backlight: Add TPS65217 WLED driver mfd: Add backlight as subdevice to the tps65217 mfd: Provide the PRCMU with its own IRQ domain mfd: Fix max8907 sparse warning mfd: Add lp8788 mfd driver mfd: dbx500: Provide a more accurate smp_twd clock mfd: rc5t583: Fix warning messages regulator: palmas: Add DT support mfd: palmas: Change regulator defns to better suite DT ...
2012-10-03Input: wacom - allow any multi-input Intuos device to set proxJason Gerecke
The ability to set the proximity flag should apply to any device that has both pen and touch input. Rather than listing classes of devices known to meet this criteria, simply filter on the quirk defining all such devices. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-03Input: wacom - report correct touch contact size for I5/BambooJason Gerecke
This changes how the touch packets for Intuos5 and 3rd-gen Bamboo are interpreted, so that proper values for the MAJOR and MINOR axes are reported. Instead of using the amplitude field (data[6]), we use the size field (data[5]) and do some calculation to transform it from a scaled-down area into axis lengths. Note that even though we assume a circular contact, both MAJOR and MINOR are reported since the resolution of the X and Y axes differ. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A few drivers were updated with device tree bindings and others got a few small cleanups and fixes." Fix trivial conflict in drivers/input/keyboard/omap-keypad.c due to changes clashing with a whitespace cleanup. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (28 commits) Input: wacom - mark Intuos5 pad as in-prox when touching buttons Input: synaptics - adjust threshold for treating position values as negative Input: hgpk - use %*ph to dump small buffer Input: gpio_keys_polled - fix dt pdata->nbuttons Input: Add KD[GS]KBDIACRUC ioctls to the compatible list Input: omap-keypad - fixed formatting Input: tegra - move platform data header Input: wacom - add support for EMR on Cintiq 24HD touch Input: s3c2410_ts - make s3c_ts_pmops const Input: samsung-keypad - use of_get_child_count() helper Input: samsung-keypad - use of_match_ptr() Input: uinput - fix formatting Input: uinput - specify exact bit sizes on userspace APIs Input: uinput - mark failed submission requests as free Input: uinput - fix race that can block nonblocking read Input: uinput - return -EINVAL when read buffer size is too small Input: uinput - take event lock when fetching events from buffer Input: get rid of MATCH_BIT() macro Input: rotary-encoder - add DT bindings Input: rotary-encoder - constify platform data pointers ...
2012-10-02Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
Pull workqueue changes from Tejun Heo: "This is workqueue updates for v3.7-rc1. A lot of activities this round including considerable API and behavior cleanups. * delayed_work combines a timer and a work item. The handling of the timer part has always been a bit clunky leading to confusing cancelation API with weird corner-case behaviors. delayed_work is updated to use new IRQ safe timer and cancelation now works as expected. * Another deficiency of delayed_work was lack of the counterpart of mod_timer() which led to cancel+queue combinations or open-coded timer+work usages. mod_delayed_work[_on]() are added. These two delayed_work changes make delayed_work provide interface and behave like timer which is executed with process context. * A work item could be executed concurrently on multiple CPUs, which is rather unintuitive and made flush_work() behavior confusing and half-broken under certain circumstances. This problem doesn't exist for non-reentrant workqueues. While non-reentrancy check isn't free, the overhead is incurred only when a work item bounces across different CPUs and even in simulated pathological scenario the overhead isn't too high. All workqueues are made non-reentrant. This removes the distinction between flush_[delayed_]work() and flush_[delayed_]_work_sync(). The former is now as strong as the latter and the specified work item is guaranteed to have finished execution of any previous queueing on return. * In addition to the various bug fixes, Lai redid and simplified CPU hotplug handling significantly. * Joonsoo introduced system_highpri_wq and used it during CPU hotplug. There are two merge commits - one to pull in IRQ safe timer from tip/timers/core and the other to pull in CPU hotplug fixes from wq/for-3.6-fixes as Lai's hotplug restructuring depended on them." Fixed a number of trivial conflicts, but the more interesting conflicts were silent ones where the deprecated interfaces had been used by new code in the merge window, and thus didn't cause any real data conflicts. Tejun pointed out a few of them, I fixed a couple more. * 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits) workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending() workqueue: use cwq_set_max_active() helper for workqueue_set_max_active() workqueue: introduce cwq_set_max_active() helper for thaw_workqueues() workqueue: remove @delayed from cwq_dec_nr_in_flight() workqueue: fix possible stall on try_to_grab_pending() of a delayed work item workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback() workqueue: use __cpuinit instead of __devinit for cpu callbacks workqueue: rename manager_mutex to assoc_mutex workqueue: WORKER_REBIND is no longer necessary for idle rebinding workqueue: WORKER_REBIND is no longer necessary for busy rebinding workqueue: reimplement idle worker rebinding workqueue: deprecate __cancel_delayed_work() workqueue: reimplement cancel_delayed_work() using try_to_grab_pending() workqueue: use mod_delayed_work() instead of __cancel + queue workqueue: use irqsafe timer for delayed_work workqueue: clean up delayed_work initializers and add missing one workqueue: make deferrable delayed_work initializer names consistent workqueue: cosmetic whitespace updates for macro definitions workqueue: deprecate system_nrt[_freezable]_wq workqueue: deprecate flush[_delayed]_work_sync() ...
2012-10-02mfd: 88pm860x: Move gpadc init into touchHaojian Zhuang
The initilization of GPADC is moved from core driver to touch driver with DT support. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-02mfd: 88pm860x: Device tree supportHaojian Zhuang
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-01Merge tag 'multiplatform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
2012-10-01Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc general cleanups from Olof Johansson: "This is a large branch that contains a handful of different cleanups: - Fixing up the I/O space remapping on PCI on ARM. This is a series from Rob Herring that restructures how all pci devices allocate I/O space, and it's part of the work to allow multiplatform kernels. - A number of cleanup series for OMAP, moving and removing some headers, sparse irq rework and in general preparation for multiplatform. - Final removal of all non-DT boards for Tegra, it is now device-tree-only! - Removal of a stale platform, nxp4008. It's an old mobile chipset that is no longer in use, and was very likely never really used with a mainline kernel. We have not been able to find anyone interested in keeping it around in the kernel. - Removal of the legacy dmaengine driver on tegra + A handful of other things that I haven't described above." Fix up some conflicts with the staging tree (and because nxp4008 was removed) * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits) ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus ARM: mmp: using for_each_set_bit to simplify the code ARM: tegra: harmony: fix ldo7 regulator-name ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ...
2012-10-01Merge branch 'for-next' of git://github.com/rydberg/linux into nextDmitry Torokhov
Merge Henrik's updates to multitouch code. Even though Jiri already pulled them in I need to do it too since my changes to evdev using dynamic major would clash with them.
2012-10-01Merge branch 'next' into for-linusDmitry Torokhov
Prepare first set of updates for 3.7 merge window.
2012-10-01Merge branches 'from-henrik', 'hidraw', 'logitech', 'picolcd', 'ps3', ↵Jiri Kosina
'uclogic', 'wacom' and 'wiimote' into for-linus
2012-09-28Input: wacom - mark Intuos5 pad as in-prox when touching buttonsJason Gerecke
If the ExpressKeys on the Intuos5 are touched, they currently result an out-of-prox packet being sent even if the pad is already out of prox. This can cause some confusion in the X driver. To restore the expected semantics, we make being touched a sufficient condition to signal proximity. https://bugs.freedesktop.org/show_bug.cgi?id=54250 Reported-by: Timo Aaltonen <tjaalton@ubuntu.com> Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-09-28Input: synaptics - adjust threshold for treating position values as negativeSeth Forshee
Commit c039450 (Input: synaptics - handle out of bounds values from the hardware) caused any hardware reported values over 7167 to be treated as a wrapped-around negative value. It turns out that some firmware uses the value 8176 to indicate a finger near the edge of the touchpad whose actual position cannot be determined. This value now gets treated as negative, which can cause pointer jumps and broken edge scrolling on these machines. I only know of one touchpad which reports negative values, and this hardware never reports any value lower than -8 (i.e. 8184). Moving the threshold for treating a value as negative up to 8176 should work fine then for any hardware we currently know about, and since we're dealing with unspecified behavior it's probably the best we can do. The special 8176 value is also likely to result in sudden jumps in position, so let's also clamp this to the maximum specified value for the axis. BugLink: http://bugs.launchpad.net/bugs/1046512 https://bugzilla.kernel.org/show_bug.cgi?id=46371 Cc: stable@vger.kernel.org Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Tested-by: Alan Swanson <swanson@ukfsn.org> Tested-by: Arteom <arutemus@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-09-22Merge branch 'cleanup/__iomem' into next/cleanupOlof Johansson
__iomem annotation cleanup branch from Arnd. * cleanup/__iomem: (21 commits) net: seeq: use __iomem pointers for MMIO video: da8xx-fb: use __iomem pointers for MMIO scsi: eesox: use __iomem pointers for MMIO serial: ks8695: use __iomem pointers for MMIO input: rpcmouse: use __iomem pointers for MMIO ARM: samsung: use __iomem pointers for MMIO ARM: spear13xx: use __iomem pointers for MMIO ARM: sa1100: use __iomem pointers for MMIO ARM: prima2: use __iomem pointers for MMIO ARM: nomadik: use __iomem pointers for MMIO ARM: msm: use __iomem pointers for MMIO ARM: lpc32xx: use __iomem pointers for MMIO ARM: ks8695: use __iomem pointers for MMIO ARM: ixp4xx: use __iomem pointers for MMIO ARM: iop32x: use __iomem pointers for MMIO ARM: iop13xx: use __iomem pointers for MMIO ARM: integrator: use __iomem pointers for MMIO ARM: imx: use __iomem pointers for MMIO ARM: ebsa110: use __iomem pointers for MMIO ARM: at91: use __iomem pointers for MMIO ... Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-22Merge branch 'multiplatform/platform-data' into next/multiplatformOlof Johansson
* multiplatform/platform-data: ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: nomadik: move platform_data definitions ARM: w90x900: move platform_data definitions ARM: vt8500: move platform_data definitions ARM: tegra: move sdhci platform_data definition ARM: sa1100: move platform_data definitions ARM: pxa: move platform_data definitions ARM: netx: move platform_data definitions ARM: msm: move platform_data definitions ARM: imx: move platform_data definitions ARM: ep93xx: move platform_data definitions ARM: davinci: move platform_data definitions ARM: at91: move platform_data definitions Conflicts due to removed files: arch/arm/mach-tegra/board-harmony.c arch/arm/mach-tegra/board-trimslice.c Conflicts due to code removal: arch/arm/mach-tegra/board-paz00.c Context conflicts in: drivers/mmc/host/sdhci-tegra.c drivers/net/irda/pxaficp_ir.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21Input: atlas_btns - convert to module_acpi_driver()Mika Westerberg
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-20ARM: OMAP1: Move board-ams-delta.h from plat to machTony Lindgren
This is only used by omap1. And to fix things properly, this should not be included from the drivers at all. Acked-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Cc: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Cc: linux-mtd@lists.infradead.org Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: alsa-devel@alsa-project.org Signed-off-by: Tony Lindgren <tony@atomide.com>