summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2020-12-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - support for inhibiting input devices at request from userspace. If a device implements open/close methods, it can also put device into low power state. This is needed, for example, to disable keyboard and touchpad on convertibles when they are transitioned into tablet mode - now that ordinary input devices can be configured for polling mode, dedicated input polling device implementation has been removed - GTCO tablet driver has been removed, as it used problematic custom HID parser, devices are EOL, and there is no interest from the manufacturer - a new driver for Dialog DA7280 haptic chips has been introduced - a new driver for power button on Dell Wyse 3020 - support for eKTF2132 in ektf2127 driver - support for SC2721 and SC2730 in sc27xx-vibra driver - enhancements for Atmel touchscreens, AD7846 touchscreens, Elan touchpads, ADP5589, ST1232 touchscreen, TM2 touchkey drivers - fixes and cleanups to allow clean builds with W=1 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (86 commits) Input: da7280 - fix spelling mistake "sequemce" -> "sequence" Input: cyapa_gen6 - fix out-of-bounds stack access Input: sc27xx - add support for sc2730 and sc2721 dt-bindings: input: Add compatible string for SC2721 and SC2730 dt-bindings: input: Convert sc27xx-vibra.txt to json-schema Input: stmpe - add axis inversion and swapping capability Input: adp5589-keys - do not explicitly control IRQ for wakeup Input: adp5589-keys - do not unconditionally configure as wakeup source Input: ipx4xx-beeper - convert comma to semicolon Input: parkbd - convert comma to semicolon Input: new da7280 haptic driver dt-bindings: input: Add document bindings for DA7280 MAINTAINERS: da7280 updates to the Dialog Semiconductor search terms Input: elantech - fix protocol errors for some trackpoints in SMBus mode Input: elan_i2c - add new trackpoint report type 0x5F Input: elants - document some registers and values Input: atmel_mxt_ts - simplify the return expression of mxt_send_bootloader_cmd() Input: imx_keypad - add COMPILE_TEST support Input: applespi - use new structure for SPI transfer delays Input: synaptics-rmi4 - use new structure for SPI transfer delays ...
2020-12-15Merge tag 'spi-v5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The big change this release has been some excellent work from Lukas Wunner which closes a bunch of holes in the cleanup paths for drivers, mainly introduced as a result of devm conversions causing bad interactions with the support SPI has for allocating the bus and driver data together. Together with some of the other work done it feels like we've turned the corner on several long standing pain points with the API. Summary: - Many cleanups around probe/remove and error handling from Lukas Wunner and Uwe Kleine-König, and further fixes around PM from Zhang Qilong. - Provide a mask for which bits of the mode can safely be configured by drivers and use that to fix an issue with the ADS7846 driver. - Documentation of the expected interactions between SPI and GPIO level chip select polarity configuration from H. Nikolaus Schaller, hopefully we're pretty much at the end of sorting out the interactions there. Thanks to Nikolaus, Sven Van Asbroeck and Linus Walleij for this. - DMA support for Allwinner sun6i controllers. - Support for Canaan K210 Designware implementations and Intel Adler Lake" * tag 'spi-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (69 commits) spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors spi: Limit the spi device max speed to controller's max speed spi: spi-geni-qcom: Use the new method of gpio CS control platform/chrome: cros_ec_spi: Drop bits_per_word assignment platform/chrome: cros_ec_spi: Don't overwrite spi::mode spi: dw: Add support for the Canaan K210 SoC SPI spi: dw: Add support for 32-bits max xfer size dt-bindings: spi: dw-apb-ssi: Add Canaan K210 SPI controller spi: Update DT binding docs to support SiFive FU740 SoC spi: atmel-quadspi: Fix use-after-free on unbind spi: npcm-fiu: Disable clock in probe error path spi: ar934x: Don't leak SPI master in probe error path spi: mt7621: Don't leak SPI master in probe error path spi: mt7621: Disable clock in probe error path media: netup_unidvb: Don't leak SPI master in probe error path spi: sc18is602: Don't leak SPI master in probe error path spi: rb4xx: Don't leak SPI master in probe error path spi: gpio: Don't leak SPI master in probe error path spi: spi-mtk-nor: Don't leak SPI master in probe error path spi: mxic: Don't leak SPI master in probe error path ...
2020-12-14Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 5.11 merge window.
2020-12-14Input: da7280 - fix spelling mistake "sequemce" -> "sequence"Colin Ian King
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201214223109.82924-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-14Input: cyapa_gen6 - fix out-of-bounds stack accessArnd Bergmann
gcc -Warray-bounds warns about a serious bug in cyapa_pip_retrieve_data_structure: drivers/input/mouse/cyapa_gen6.c: In function 'cyapa_pip_retrieve_data_structure.constprop': include/linux/unaligned/access_ok.h:40:17: warning: array subscript -1 is outside array bounds of 'struct retrieve_data_struct_cmd[1]' [-Warray-bounds] 40 | *((__le16 *)p) = cpu_to_le16(val); drivers/input/mouse/cyapa_gen6.c:569:13: note: while referencing 'cmd' 569 | } __packed cmd; | ^~~ Apparently the '-2' was added to the pointer instead of the value, writing garbage into the stack next to this variable. Fixes: c2c06c41f700 ("Input: cyapa - add gen6 device module support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201026161332.3708389-1-arnd@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a fix for cm109 stomping on its own control URB if it tries to toggle buzzer immediately after userspace opens input device (found by syzcaller) - another fix for Raydium touchscreens that do not like splitting command transfers - quirks for i8042, soc_button_array, and goodix drivers to make them work better with certain hardware. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: goodix - add upside-down quirk for Teclast X98 Pro tablet Input: cm109 - do not stomp on control URB Input: i8042 - add Acer laptops to the i8042 reset list Input: cros_ec_keyb - send 'scancodes' in addition to key events Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list Input: raydium_ts_i2c - do not split tx transactions
2020-12-11Input: sc27xx - add support for sc2730 and sc2721Nemo Han
Add new compatible strings and match data to support sc2730 and sc2721 which are two varieties of SC27XX family. Signed-off-by: Nemo Han <nemo.han@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20201117034949.47877-2-zhang.lyra@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: stmpe - add axis inversion and swapping capabilityStefan Riedmueller
Make use of generic touchscreen_properties structure to add axis inversion and swapping capabilities. It's configurable via devicetree properties: touchscreen-inverted-x touchscreen-inverted-y touchscreen-swapped-x-y Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Link: https://lore.kernel.org/r/20200922093903.157232-1-s.riedmueller@phytec.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: goodix - add upside-down quirk for Teclast X98 Pro tabletSimon Beginn
The touchscreen on the Teclast x98 Pro is also mounted upside-down in relation to the display orientation. Signed-off-by: Simon Beginn <linux@simonmicro.de> Signed-off-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20201117004253.27A5A27EFD@localhost Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: cm109 - do not stomp on control URBDmitry Torokhov
We need to make sure we are not stomping on the control URB that was issued when opening the device when attempting to toggle buzzer. To do that we need to mark it as pending in cm109_open(). Reported-and-tested-by: syzbot+150f793ac5bc18eee150@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: adp5589-keys - do not explicitly control IRQ for wakeupDmitry Torokhov
If device is set up as a wakeup source, I2C core configures the interrupt line as wake IRQ and PM core automatically configures it for waking up the system on system suspend transition, so we do not have to explicitly call enable_irq_wake() and disable_irq_wake() in suspend/resume. Link: https://lore.kernel.org/r/20201120073920.3214492-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: adp5589-keys - do not unconditionally configure as wakeup sourceDmitry Torokhov
We should not be configuring the controller as a wakeup source in the driver, but rather rely on I2C core to mark it as such by either instantiating as I2C_CLIENT_WAKEUP or specifying "wakeup-source" device property. Link: https://lore.kernel.org/r/20201120073920.3214492-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: ipx4xx-beeper - convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211085032.2598-1-zhengyongjun3@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: parkbd - convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211084957.2540-1-zhengyongjun3@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: new da7280 haptic driverRoy Im
Adds support for the Dialog DA7280 LRA/ERM Haptic Driver with multiple mode and integrated waveform memory and wideband support. It communicates via an I2C bus to the device. Signed-off-by: Roy Im <roy.im.opensource@diasemi.com> Reviewed-by: Jes Sorensen <Jes.Sorensen@gmail.com>. Link: https://lore.kernel.org/r/1e293e8c4830b09255af3b7e1721b73afaefdfa3.1606320459.git.Roy.Im@diasemi.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: elantech - fix protocol errors for some trackpoints in SMBus modejingle.wu
There are some version of Elan trackpads that send incorrect data when in SMbus mode, unless they are switched to use 0x5f reports instead of standard 0x5e. This patch implements querying device to retrieve chips identifying data, and switching it, when needed to the alternative report. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Link: https://lore.kernel.org/r/20201211071531.32413-1-jingle.wu@emc.com.tw Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: elan_i2c - add new trackpoint report type 0x5FJingle Wu
The 0x5F is a new trackpoint report type used by some modules. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Link: https://lore.kernel.org/r/20201211071511.32349-1-jingle.wu@emc.com.tw Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-10Input: elants - document some registers and valuesMichał Mirosław
Add information found in downstream kernels, to make the code less magic. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/728fff020bc92be10d84cc2a7ea8af6fd99af96c.1607669375.git.mirq-linux@rere.qmqm.pl Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-10Input: atmel_mxt_ts - simplify the return expression of ↵Zheng Yongjun
mxt_send_bootloader_cmd() Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201210135943.1612-1-zhengyongjun3@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-10Input: imx_keypad - add COMPILE_TEST supportAnson Huang
Add COMPILE_TEST support to imx_keypad driver for better compile testing coverage. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Link: https://lore.kernel.org/r/1583137573-16628-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-10Input: applespi - use new structure for SPI transfer delaysSergiu Cuciurean
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Tested-by: Ronald Tschalär <ronald@innovation.ch> Reviewed-by: Ronald Tschalär <ronald@innovation.ch> Link: https://lore.kernel.org/r/20200227124534.23399-1-sergiu.cuciurean@analog.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-10Input: synaptics-rmi4 - use new structure for SPI transfer delaysSergiu Cuciurean
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Link: https://lore.kernel.org/r/20200227130336.27042-1-sergiu.cuciurean@analog.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-10Input: ad7877 - use new structure for SPI transfer delaysSergiu Cuciurean
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Link: https://lore.kernel.org/r/20200228104508.15564-1-sergiu.cuciurean@analog.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-10Input: edt-ft5x06 - consolidate handling of number of electrodesDmitry Torokhov
Instead of special-casing retrieval of number of X/Y electrodes based on the firmware, let's select default values and mark registers as non-existent on firmwares that do not support this operation. Also mark "report rate" register as non-existent for generic firmwares as having it set to 0 does not make sense. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Simon Budig <simon.budig@kernelconcepts.de> Link: https://lore.kernel.org/r/X9FZFs3NZADoIhhH@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-10Merge series "spi: spi-geni-qcom: Use gpio descriptors for CS" from Stephen ↵Mark Brown
Boyd <swboyd@chromium.org>: Collected patches from the two series below and associated tags so they can be merged in one pile through the spi tree. Merry December! SPI: https://lore.kernel.org/r/20201202214935.1114381-1-swboyd@chromium.org cros-ec: https://lore.kernel.org/r/20201203011649.1405292-1-swboyd@chromium.org Cc: Akash Asthana <akashast@codeaurora.org> Cc: Simon Glass <sjg@chromium.org> Cc: Gwendal Grignou <gwendal@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Alexandru M Stan <amstan@chromium.org> Stephen Boyd (3): platform/chrome: cros_ec_spi: Don't overwrite spi::mode platform/chrome: cros_ec_spi: Drop bits_per_word assignment spi: spi-geni-qcom: Use the new method of gpio CS control drivers/platform/chrome/cros_ec_spi.c | 2 -- drivers/spi/spi-geni-qcom.c | 1 + 2 files changed, 1 insertion(+), 2 deletions(-) base-commit: b65054597872ce3aefbc6a666385eabdf9e288da -- https://chromeos.dev
2020-12-09Input: i8042 - add Acer laptops to the i8042 reset listChris Chiu
The touchpad operates in Basic Mode by default in the Acer BIOS setup, but some Aspire/TravelMate models require the i8042 to be reset in order to be correctly detected. Signed-off-by: Chris Chiu <chiu@endlessos.org> Link: https://lore.kernel.org/r/20201207071250.15021-1-chiu@endlessos.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-09Input: tm2-touchkey - add vddio regulatorStephan Gerhold
The Samsung touchkey controllers are often used with external pull-up for the interrupt line and the I2C lines, so we might need to enable a regulator to bring the lines into usable state. Otherwise, this might cause spurious interrupts and reading from I2C will fail. Implement support for a "vddio-supply" that is enabled by the tm2-touchkey driver so that the regulator gets enabled when needed. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201203131242.44397-3-stephan@gerhold.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-09Input: cyapa - switch to using devm_add_action_or_reset()Fuqian Huang
devm_add_action_or_reset() is introduced as a helper function which internally calls devm_add_action(). If devm_add_action() fails then it will execute the action mentioned and return the error code. This reduce source code size (avoid writing the action twice) and reduce the likelyhood of bugs. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Link: https://lore.kernel.org/linux-input/20190708123323.11943-1-huangfq.daxian@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-09Input: cros_ec_keyb - send 'scancodes' in addition to key eventsDmitry Torokhov
To let userspace know what 'scancodes' should be used in EVIOCGKEYCODE and EVIOCSKEYCODE ioctls, we should send EV_MSC/MSC_SCAN events in addition to EV_KEY/KEY_* events. The driver already declared MSC_SCAN capability, so it is only matter of actually sending the events. Link: https://lore.kernel.org/r/X87aOaSptPTvZ3nZ@google.com Acked-by: Rajat Jain <rajatja@google.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-09Input: add driver for power button on Dell Wyse 3020Lubomir Rintel
This adds support for the power button attached to the Embedded Controller on a Dell Wyse 3020 "Ariel" board. The Embedded Controller's SPI interface is actually capable sending and receiving the PS/2 keyboard and mouse protocol data, which looks like a good fit for a serio driver. Howerver, I don't know of any machines where this is actually used. My board only has a single power button and no way to connect an actual keyboard or a mouse. Using the atkbd driver with serio would be an overkill and would be inconvenient for the userspace. Therefore this driver registers an input device that is only capable of reporting the power button presses and releases. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20201201083533.1724287-3-lkundrak@v3.sk Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-09Input: gtco - remove driverDmitry Torokhov
The driver has its own HID descriptor parsing code, that had and still has several issues discovered by syzbot and other tools. Ideally we should move the driver over to the HID subsystem, so that it uses proven parsing code. However the devices in question are EOL, and GTCO is not willing to extend resources for that, so let's simply remove the driver. Note that our HID support has greatly improved over the last 10 years, we may also consider reverting 6f8d9e26e7de ("hid-core.c: Adds all GTCO CalComp Digitizers and InterWrite School Products to blacklist") and see if GTCO devices actually work with normal HID drivers. Link: https://lore.kernel.org/r/X8wbBtO5KidME17K@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-06Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the ↵Hans de Goede
dmi_use_low_level_irq list Add the Lenovo Yoga Tablet2 1051L to the list of devices where the ACPI AML code is poking the GPIO config register directly changing the IRQ type to a low_level_irq, which we need to work around. This fixes the home button on the Lenovo Yoga Tablet2 1051L not working. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201206161245.24798-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-06Input: raydium_ts_i2c - do not split tx transactionsFurquan Shaikh
Raydium device does not like splitting of tx transactions into multiple messages - one for the register address and one for the actual data. This results in incorrect behavior on the device side. This change updates raydium_i2c_read and raydium_i2c_write to create i2c_msg arrays separately and passes those arrays into raydium_i2c_xfer which decides based on the address whether the bank switch command should be sent. The bank switch header is still added by raydium_i2c_read and raydium_i2c_write to ensure that all these operations are performed as part of a single I2C transfer. It guarantees that no other transactions are initiated to any other device on the same bus after the bank switch command is sent. Signed-off-by: Furquan Shaikh <furquan@google.com> Link: https://lore.kernel.org/r/20201205005941.1427643-1-furquan@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A fix for 'RETRIGEN' handling in Atmel touch controllers that was causing lost interrupts on systems using edge-triggered interrupts, a quirk for i8042 driver, and a couple more fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: atmel_mxt_ts - fix lost interrupts Input: xpad - support Ardwiino Controllers Input: i8042 - add ByteSpeed touchpad to noloop table Input: i8042 - fix error return code in i8042_setup_aux() Input: soc_button_array - add missing include
2020-12-04Input: vsxxxaa - fix Kconfig spelling mistakeColin Ian King
There is a spelling mistake in the Kconfig help text. Fix it by replacing "theses" with "these". Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201204193635.1152241-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-02Input: Add "inhibited" propertyPatrik Fimml
Userspace might want to implement a policy to temporarily disregard input from certain devices, including not treating them as wakeup sources. An example use case is a laptop, whose keyboard can be folded under the screen to create tablet-like experience. The user then must hold the laptop in such a way that it is difficult to avoid pressing the keyboard keys. It is therefore desirable to temporarily disregard input from the keyboard, until it is folded back. This obviously is a policy which should be kept out of the kernel, but the kernel must provide suitable means to implement such a policy. This patch adds a sysfs interface for exactly this purpose. To implement the said interface it adds an "inhibited" property to struct input_dev, and effectively creates four states a device can be in: closed uninhibited, closed inhibited, open uninhibited, open inhibited. It also defers calling driver's ->open() and ->close() to until they are actually needed, e.g. it makes no sense to prepare the underlying device for generating events (->open()) if the device is inhibited. uninhibit closed <------------ closed uninhibited ------------> inhibited | ^ inhibit | ^ 1st | | 1st | | open | | open | | | | | | | | last | | last | | close | | close v | uninhibit v | open <------------ open uninhibited ------------> inhibited The top inhibit/uninhibit transition happens when users == 0. The bottom inhibit/uninhibit transition happens when users > 0. The left open/close transition happens when !inhibited. The right open/close transition happens when inhibited. Due to all transitions being serialized with dev->mutex, it is impossible to have "diagonal" transitions between closed uninhibited and open inhibited or between open uninhibited and closed inhibited. No new callbacks are added to drivers, because their open() and close() serve exactly the purpose to tell the driver to start/stop providing events to the input core. Consequently, open() and close() - if provided - are called in both inhibit and uninhibit paths. Signed-off-by: Patrik Fimml <patrikf@chromium.org> Co-developed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Link: https://lore.kernel.org/r/20200608112211.12125-8-andrzej.p@collabora.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-02Input: use input_device_enabled()Andrzej Pietrasiewicz
Use the newly added helper in relevant input drivers. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Link: https://lore.kernel.org/r/20200608112211.12125-3-andrzej.p@collabora.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-02Input: add input_device_enabled()Andrzej Pietrasiewicz
A helper function for drivers to decide if the device is used or not. A lockdep check is introduced as inspecting ->users should be done under input device's mutex. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Link: https://lore.kernel.org/r/20200608112211.12125-2-andrzej.p@collabora.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-02Input: omap4-keypad - set up interrupt as wakeup sourceDmitry Torokhov
Marking main interrupt as wakeup interrupt in probe allows us to drop custom suspend/resume methods whose only purpose was to configure interrupt for waking up the system. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-02Input: remove input_polled_dev implementationDmitry Torokhov
Now that normal input devices support polling mode, and all users of input_polled_dev API have been converted, we can remove it. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-01Input: atmel_mxt_ts - fix lost interruptsLinus Walleij
After commit 74d905d2d38a devices requiring the workaround for edge triggered interrupts stopped working. The hardware needs the quirk to be used before even proceeding to check if the quirk is needed because mxt_acquire_irq() is called before mxt_check_retrigen() is called and at this point pending IRQs need to be checked, and if the workaround is not active, all interrupts will be lost from this point. Solve this by switching the calls around. Reported-by: Andre Müller <andre.muller@web.de> Tested-by: Andre Müller <andre.muller@web.de> Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Fixes: 74d905d2d38a ("Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201201123026.1416743-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-30Input: xpad - support Ardwiino ControllersSanjay Govind
This commit adds support for Ardwiino Controllers Signed-off-by: Sanjay Govind <sanjay.govind9@gmail.com> Link: https://lore.kernel.org/r/20201201071922.131666-1-sanjay.govind9@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-30Input: i8042 - add ByteSpeed touchpad to noloop tablePo-Hsu Lin
It looks like the C15B laptop got another vendor: ByteSpeed LLC. Avoid AUX loopback on this touchpad as well, thus input subsystem will be able to recognize a Synaptics touchpad in the AUX port. BugLink: https://bugs.launchpad.net/bugs/1906128 Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Link: https://lore.kernel.org/r/20201201054723.5939-1-po-hsu.lin@canonical.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-24Input: i8042 - fix error return code in i8042_setup_aux()Luo Meng
Fix to return a negative error code from the error handling case instead of 0 in function i8042_setup_aux(), as done elsewhere in this function. Fixes: f81134163fc7 ("Input: i8042 - use platform_driver_probe") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Luo Meng <luomeng12@huawei.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201123133420.4071187-1-luomeng12@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-24Input: soc_button_array - add missing includeDmitry Torokhov
This fixes the following build errors: CC [M] drivers/input/misc/soc_button_array.o drivers/input/misc/soc_button_array.c:156:4: error: implicit declaration of function 'irq_set_irq_type' [-Werror,-Wimplicit-function-declaration] irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); ^ drivers/input/misc/soc_button_array.c:156:26: error: use of undeclared identifier 'IRQ_TYPE_LEVEL_LOW' irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); ^ 2 errors generated. Fixes: 78a5b53e9fb4 ("Input: soc_button_array - work around DSDTs which modify the irqflags") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201123061508.GA1009828@dtor-ws Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-22Input: libps2 - fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by replacing a /* Fall through */ comment with the new pseudo-keyword macro fallthrough. Notice that Clang doesn't recognize /* Fall through */ comments as implicit fall-through markings. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/d2944854e3e118b837755abf4cbdb497662001b7.1605896060.git.gustavoars@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-22Input: pcspkr - fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of just letting the code fall through to the next case. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/4b659e3e65f2fa3c8bb7ed153e2016c3fb395bbc.1605896059.git.gustavoars@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-22Input: omap4-keypad - fix runtime PM error handlingZhang Qilong
In omap4_keypad_probe, the patch fix several bugs. 1) pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to pm_runtime_put_noidle will result in reference leak. 2) In err_unmap, forget to disable runtime of device, pm_runtime_enable will increase power disable depth. Thus a pairing decrement is needed on the error handling path to keep it balanced. 3) In err_pm_disable, it will call pm_runtime_put_sync twice not one time. To fix this we factor out code reading revision and disabling touchpad, and drop PM reference once we are done talking to the device. Fixes: f77621cc640a7 ("Input: omap-keypad - dynamically handle register offsets") Fixes: 5ad567ffbaf20 ("Input: omap4-keypad - wire up runtime PM handling") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201120133918.2559681-1-zhangqilong3@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-19Input: vmmouse - demote obvious abuse of kernel-doc headerLee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/mouse/vmmouse.c:99: warning: Function parameter or member 'cmd' not described in 'VMMOUSE_CMD' drivers/input/mouse/vmmouse.c:99: warning: Function parameter or member 'in1' not described in 'VMMOUSE_CMD' drivers/input/mouse/vmmouse.c:99: warning: Function parameter or member 'out1' not described in 'VMMOUSE_CMD' drivers/input/mouse/vmmouse.c:99: warning: Function parameter or member 'out2' not described in 'VMMOUSE_CMD' drivers/input/mouse/vmmouse.c:99: warning: Function parameter or member 'out3' not described in 'VMMOUSE_CMD' drivers/input/mouse/vmmouse.c:99: warning: Function parameter or member 'out4' not described in 'VMMOUSE_CMD' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201112110204.2083435-16-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-19Input: applespi - provide missing struct 'message' descriptionsLee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/keyboard/applespi.c:306: warning: Function parameter or member 'keyboard' not described in 'message' drivers/input/keyboard/applespi.c:306: warning: Function parameter or member 'touchpad' not described in 'message' drivers/input/keyboard/applespi.c:306: warning: Function parameter or member 'tp_info' not described in 'message' drivers/input/keyboard/applespi.c:306: warning: Function parameter or member 'tp_info_command' not described in 'message' drivers/input/keyboard/applespi.c:306: warning: Function parameter or member 'init_mt_command' not described in 'message' drivers/input/keyboard/applespi.c:306: warning: Function parameter or member 'capsl_command' not described in 'message' drivers/input/keyboard/applespi.c:306: warning: Function parameter or member 'bl_command' not described in 'message' drivers/input/keyboard/applespi.c:306: warning: Function parameter or member 'data' not described in 'message' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201112110204.2083435-15-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 20:36:30 +0000