summaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen
AgeCommit message (Collapse)Author
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: bcm5974 - set BUTTONPAD property Input: serio_raw - return proper result when serio_raw_write fails Input: serio_raw - really signal HUP upon disconnect Input: serio_raw - remove stray semicolon Input: revert some over-zealous conversions to module_platform_driver()
2012-01-10Input: revert some over-zealous conversions to module_platform_driver()Dmitry Torokhov
Recent conversion to module_platform_driver() went a bit too far and converted not only drivers that used platform_driver_register() but also ones using platform_driver_probe(), breaking them in process. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (64 commits) Input: tc3589x-keypad - add missing kerneldoc Input: ucb1400-ts - switch to using dev_xxx() for diagnostic messages Input: ucb1400_ts - convert to threaded IRQ Input: ucb1400_ts - drop inline annotations Input: usb1400_ts - add __devinit/__devexit section annotations Input: ucb1400_ts - set driver owner Input: ucb1400_ts - convert to use dev_pm_ops Input: psmouse - make sure we do not use stale methods Input: evdev - do not block waiting for an event if fd is nonblock Input: evdev - if no events and non-block, return EAGAIN not 0 Input: evdev - only allow reading events if a full packet is present Input: add driver for pixcir i2c touchscreens Input: samsung-keypad - implement runtime power management support Input: tegra-kbc - report wakeup key for some platforms Input: tegra-kbc - add device tree bindings Input: add driver for AUO In-Cell touchscreens using pixcir ICs Input: mpu3050 - configure the sampling method Input: mpu3050 - ensure we enable interrupts Input: mpu3050 - add of_match table for device-tree probing Input: sentelic - document the latest hardware ... Fix up fairly trivial conflicts (device tree matching conflicting with some independent cleanups) in drivers/input/keyboard/samsung-keypad.c
2012-01-09Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Driver specific changes Again, a lot of platforms have changes in here: pxa, samsung, omap, at91, imx, ... * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: sa1100: clean up of the clock support ARM: pxa: add dummy clock for sa1100-rtc RTC: sa1100: support sa1100, pxa and mmp soc families RTC: sa1100: remove redundant code of setting alarm RTC: sa1100: Clean out ost register Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq() pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq() ARM: EXYNOS: Modified files for SPI consolidation work ARM: S5P64X0: Enable SDHCI support ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names ARM: S5P64X0: Add HSMMC setup for host Controller ARM: EXYNOS: Add USB OHCI support to ORIGEN board USB: Add Samsung Exynos OHCI diver ARM: EXYNOS: Add USB OHCI support to SMDKV310 board ARM: EXYNOS: Add USB OHCI device net: macb: fix build break with !CONFIG_OF i2c: tegra: Support DVC controller in device tree i2c: tegra: Add __devinit/exit to probe/remove net/at91_ether: use gpio_is_valid for phy IRQ line ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT ...
2012-01-08Merge branch 'pm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) PM / Hibernate: Implement compat_ioctl for /dev/snapshot PM / Freezer: fix return value of freezable_schedule_timeout_killable() PM / shmobile: Allow the A4R domain to be turned off at run time PM / input / touchscreen: Make st1232 use device PM QoS constraints PM / QoS: Introduce dev_pm_qos_add_ancestor_request() PM / shmobile: Remove the stay_on flag from SH7372's PM domains PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode PM: Drop generic_subsys_pm_ops PM / Sleep: Remove forward-only callbacks from AMBA bus type PM / Sleep: Remove forward-only callbacks from platform bus type PM: Run the driver callback directly if the subsystem one is not there PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412. PM / Sleep: Merge internal functions in generic_ops.c PM / Sleep: Simplify generic system suspend callbacks PM / Hibernate: Remove deprecated hibernation snapshot ioctls PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled() ARM: S3C64XX: Implement basic power domain support PM / shmobile: Use common always on power domain governor ... Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused XBT_FORCE_SLEEP bit
2012-01-08Merge branch 'for-linus2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits) reiserfs: Properly display mount options in /proc/mounts vfs: prevent remount read-only if pending removes vfs: count unlinked inodes vfs: protect remounting superblock read-only vfs: keep list of mounts for each superblock vfs: switch ->show_options() to struct dentry * vfs: switch ->show_path() to struct dentry * vfs: switch ->show_devname() to struct dentry * vfs: switch ->show_stats to struct dentry * switch security_path_chmod() to struct path * vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb vfs: trim includes a bit switch mnt_namespace ->root to struct mount vfs: take /proc/*/mounts and friends to fs/proc_namespace.c vfs: opencode mntget() mnt_set_mountpoint() vfs: spread struct mount - remaining argument of next_mnt() vfs: move fsnotify junk to struct mount vfs: move mnt_devname vfs: move mnt_list to struct mount vfs: switch pnode.h macros to struct mount * ...
2012-01-04Input: ucb1400-ts - switch to using dev_xxx() for diagnostic messagesDmitry Torokhov
Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-04Input: ucb1400_ts - convert to threaded IRQDmitry Torokhov
Instead of manually create and handler kernel thread switch to threaded IRQ and let kernel IRQ core manage thread for us. Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-04Input: ucb1400_ts - drop inline annotationsDmitry Torokhov
Let compiler figure out which ones makes most sense to inline. Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-04Input: usb1400_ts - add __devinit/__devexit section annotationsDmitry Torokhov
Add __devinit/__devexit sections annotations so parts of code could be discarded after completing driver initialization. Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-04Input: ucb1400_ts - set driver ownerDmitry Torokhov
So that it has proper symlink to the containing module in sysfs. Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-04Input: ucb1400_ts - convert to use dev_pm_opsDmitry Torokhov
Instead of using legacy PM interfaces switch to using dev_pm_ops. Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-03switch ->is_visible() to returning umode_tAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-12-30Input: add driver for pixcir i2c touchscreensJianchun Bian
This patch adds a driver for PIXCIR's I2C connected touchscreens. Signed-off-by: Jianchun <jcbian@pixcir.com.cn> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-28Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq()Axel Lin
Since commit 6384fd "ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ", I got below buid errors due to implicit declaration of function 'IRQ_GPIO'. Use common gpio_to_irq() to replace machine dependant macro IRQ_GPIO(). CC drivers/input/touchscreen/zylonite-wm97xx.o drivers/input/touchscreen/zylonite-wm97xx.c: In function 'zylonite_wm97xx_probe': drivers/input/touchscreen/zylonite-wm97xx.c:195: error: implicit declaration of function 'IRQ_GPIO' make[3]: *** [drivers/input/touchscreen/zylonite-wm97xx.o] Error 1 make[2]: *** [drivers/input/touchscreen] Error 2 make[1]: *** [drivers/input] Error 2 make: *** [drivers] Error 2 Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-12-27Input: add driver for AUO In-Cell touchscreens using pixcir ICsHeiko Stübner
Some displays from AUO have a so called in-cell touchscreen, meaning it is built directly into the display unit. Touchdata is gathered through PIXCIR Tango-ICs and processed in an Atmel ATmega168P with custom firmware. Communication between the host system and ATmega is done via I2C. Devices using this touch solution include the Dell Streak5 and the family of Qisda ebook readers. The driver reports single- and multi-touch events including touch area values. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-25PM / input / touchscreen: Make st1232 use device PM QoS constraintsRafael J. Wysocki
Make the st1232 driver use dev_pm_qos_add_ancestor_request() to add a device PM QoS latency constraint for the controller it depends on, so that the controller won't go into an overly deep low-power state when the touchscreen has to be particularly responsive (e.g. when the user moves his or her finger on it). This change is based on a prototype patch from Guennadi Liakhovetski. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-12Input: migor-ts - rework probe() to simplify error pathDmitry Torokhov
Register input device last so that we do not have to reset input device pointer after calling input_unregister_device(). Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-12Input: migor-ts - use proper client data accessor functionsDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-12Input: migor-ts - convert to a threaded IRQDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-30Input: htcpen - switch to DMI-based autoloadingDmitry Torokhov
Having module device table based on PNP id produces the following warning: CC drivers/input/touchscreen/htcpen.o drivers/input/touchscreen/htcpen.c:50: warning: 'pnp_ids' defined but not used This happens because it is not a PNP driver, bit rather ISA driver and pnp_ids table is not used anywhere. To fix this issue let's switch to DMI-based module table instead, Reported-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-30Input: ad7879-i2c - use swapped variant of i2c_smbus_read_word_dataJonathan Cameron
This variant was introduced in i2c: boilerplate function for byte swapped smbus_write/read_word_data This also has the side effect of ensuring any errors from the i2c read and no longer mangled. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-30Input: touchscreen - use macro module_platform_driver()JJ Ding
Commit 940ab88962bc1aff3273a8356d64577a6e386736 introduced a new macro to save some platform_driver boilerplate code. Use it. Signed-off-by: JJ Ding <dgdunix@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-29Input: remove redundant spi driver bus initializationLars-Peter Clausen
In ancient times it was necessary to manually initialize the bus field of an spi_driver to spi_bus_type. These days this is done in spi_driver_register(), so we can drop the manual assignment. The patch was generated using the following coccinelle semantic patch: // <smpl> @@ identifier _driver; @@ struct spi_driver _driver = { .driver = { - .bus = &spi_bus_type, }, }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-29Input: ad7879-i2c - remove redundant MODULE_ALIASAxel Lin
MODULE_DEVICE_TABLE will setup the module alias for us, thus adding MODULE_ALIAS for an entry already in MODULE_DEVICE_TABLE is redundant. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-29Merge commit 'v3.2-rc3' into nextDmitry Torokhov
2011-11-18USB: convert drivers/input/* to use module_usb_driver()Greg Kroah-Hartman
This converts the drivers in drivers/input/* to use the module_usb_driver() macro which makes the code smaller and a bit simpler. Added bonus is that it removes some unneeded kernel log messages about drivers loading and/or unloading. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Ville Syrjala <syrjala@sci.fi> Cc: Henk Vergonet <Henk.Vergonet@gmail.com> Cc: Alessandro Rubini <rubini@ipvvis.unipv.it> Cc: Henrik Rydberg <rydberg@euromail.se> Cc: "Magnus Hörlin" <magnus@alefors.se> Cc: Chris Moeller <kode54@gmail.c> Cc: Christoph Fritz <chf.fritz@googlemail.com> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Edwin van Vliet <edwin@cheatah.nl> Cc: Ping Cheng <pingc@wacom.com> Cc: Eduard Hasenleithner <eduard@hasenleithner.at> Cc: Alexander Strakh <strakh@ispras.ru> Cc: Glenn Sommer <gsommer@datanordisk.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15Input: ad7879 - consolidate PM methodsDmitry Torokhov
The PM methods are basically the same for SPI and I2C busses, so let's use the same dev_pm_ops for both of them. Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-15Input: add EETI eGalax I2C capacitive multi touch driverZhang Jiejing
This patch adds the EETI eGalax serial multi touch controller driver. EETI eGalax serial touch screen controller is a I2C based multiple capacitive touch screen controller, it can support 5 touch events maximum. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-09Input: convert obsolete strict_strtox to kstrtoxJJ Ding
With commit 67d0a0754455f89ef3946946159d8ec9e45ce33a we mark strict_strtox as obsolete. Convert all remaining such uses in drivers/input/. Also change long to appropriate types, and return error conditions from kstrtox separately, as Dmitry sugguests. Signed-off-by: JJ Ding <dgdunix@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-05Input: usbtouchscreen - add ELO IntelliTouch 2700 supportMichael Gebetsroither
Signed-off-by: Michael Gebetsroither <michael@mgeb.org> Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-03Merge branch 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6Linus Torvalds
* 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6: (80 commits) mfd: Fix missing abx500 header file updates mfd: Add missing <linux/io.h> include to intel_msic x86, mrst: add platform support for MSIC MFD driver mfd: Expose TurnOnStatus in ab8500 sysfs mfd: Remove support for early drop ab8500 chip mfd: Add support for ab8500 v3.3 mfd: Add ab8500 interrupt disable hook mfd: Convert db8500-prcmu panic() into pr_crit() mfd: Refactor db8500-prcmu request_clock() function mfd: Rename db8500-prcmu init function mfd: Fix db5500-prcmu defines mfd: db8500-prcmu voltage domain consumers additions mfd: db8500-prcmu reset code retrieval mfd: db8500-prcmu tweak for modem wakeup mfd: Add db8500-pcmu watchdog accessor functions for watchdog mfd: hwacc power state db8500-prcmu accessor mfd: Add db8500-prcmu accessors for PLL and SGA clock mfd: Move to the new db500 PRCMU API mfd: Create a common interface for dbx500 PRCMU drivers mfd: Initialize DB8500 PRCMU regs ... Fix up trivial conflicts in arch/arm/mach-imx/mach-mx31moboard.c arch/arm/mach-omap2/board-omap3beagle.c arch/arm/mach-u300/include/mach/irqs.h drivers/mfd/wm831x-spi.c
2011-10-31drivers/input: Add module.h to modular drivers implicitly using itPaul Gortmaker
A pending cleanup will mean that module.h won't be implicitly everywhere anymore. Make sure the modular drivers in input dir are actually calling out for <module.h> explicitly in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-26Merge branch 'next' into for-linusDmitry Torokhov
2011-10-24input: Convert mc13783-ts to mc13xxx APIUwe Kleine-König
This is the first step to also support the touch interface of the mc13892 pmic chip. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-11Input: tsc2007 - make sure that X plate resistance is specifiedPhilip Rakity
Abort driver initialization if X plate resistance was not specified in platform data as it will cause pressure to be always calculated as 0, and making userspace ignore touch coordinates. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-06Input: ad7879-i2c - wrap suspend and resume in CONFIG_PM_SLEEPDmitry Torokhov
CONFIG_PM is defined when CONFIG_PM_SLEEP or CONFIG_PM_RUNTIME is defined, however suspend and resume methods are only valid in the context of CONFIG_PM_SLEEP. If only CONFIG_PM_RUNTIME is defined we get the following warning (courtesy of Geerts randconfig builds): ad7879-i2c.c: warning: 'ad7879_i2c_resume' defined but not used Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-06Input: atmel_mxt_ts - use snprintf for sysfs attribute show methodDaniel Kurtz
Sysfs attribute show methods are always passed a buffer of length PAGE_SIZE. To keep from overwriting this buffer and causing havoc, use snprintf() to guarantee we never write more than the buffer can hold. In addition, at least for my touchscreen, the number and size of objects was far too big to fit in a single 4K page. Therefore, this patch also trims some redundant framing text to leave more room for actual data. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-28Input: add a driver for TSC-40 serial touchscreenSebastian Andrzej Siewior
This patch adds the TSC-40 serial touchscreen driver and should be compatible with TSC-10 and TSC-25. The driver was written by Linutronix on behalf of Bachmann electronic GmbH. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20Input: penmount - simplify unregister procedureDmitry Torokhov
Since touchscreen driver does not handle any events to be sent to the device we can close serio port first and then unregister the input device. Tested-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20Input: penmount - rework handling of different protocolsDmitry Torokhov
Instead of having one large switch based on product ID use pointer to function actually doing protocol decoding. Tested-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20Input: penmount - add PenMount 6250 supportJohn Sung
Add multi touch support for PenMount 6250 touch controller. Signed-off-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20Input: penmount - add PenMount 3000 supportJohn Sung
Add dual touch support for PenMount 3000 touch controller. Signed-off-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20Input: penmount - add PenMount 6000 supportJohn Sung
Add support for PenMount 6000 touch controller. Signed-off-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20Input: penmount - fix the protocolJohn Sung
The MSB and LSB of the XY axis value are switched according to the PenMount 9000 protocol. The driver name is also changed from penmountlpc, since it is not for LPC interface at all. Signed-off-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-08Input: wacom - add POINTER and DIRECT device propertiesJason Gerecke
Adds INPUT_PROP_POINTER or INPUT_PROP_DIRECT as necessary to the hardware supported by the Wacom driver. The DIRECT property is assigned to devices with an embedded screen (i.e. touchscreens and display tablets). The POINTER property is assigned to those without embedded screens. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-07Input: remove IRQF_DISABLED from driversYong Zhang
This flag is a NOOP and can be removed now. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-07Merge commit 'v3.1-rc4' into nextDmitry Torokhov
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 13:36:52 +0000