summaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen/ads7846.c
AgeCommit message (Collapse)Author
2012-03-16Input: convert SPI drivers to use module_spi_driver()Axel Lin
This patch converts the drivers in drivers/input/* to use the module_spi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-29Input: remove redundant spi driver bus initializationLars-Peter Clausen
In ancient times it was necessary to manually initialize the bus field of an spi_driver to spi_bus_type. These days this is done in spi_driver_register(), so we can drop the manual assignment. The patch was generated using the following coccinelle semantic patch: // <smpl> @@ identifier _driver; @@ struct spi_driver _driver = { .driver = { - .bus = &spi_bus_type, }, }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-29Merge commit 'v3.2-rc3' into nextDmitry Torokhov
2011-11-09Input: convert obsolete strict_strtox to kstrtoxJJ Ding
With commit 67d0a0754455f89ef3946946159d8ec9e45ce33a we mark strict_strtox as obsolete. Convert all remaining such uses in drivers/input/. Also change long to appropriate types, and return error conditions from kstrtox separately, as Dmitry sugguests. Signed-off-by: JJ Ding <dgdunix@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-31drivers/input: Add module.h to modular drivers implicitly using itPaul Gortmaker
A pending cleanup will mean that module.h won't be implicitly everywhere anymore. Make sure the modular drivers in input dir are actually calling out for <module.h> explicitly in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-27Input: ads7846 - cleanup GPIO initializationIgor Grinberg
Use gpio_request_one() instead of multiple gpiolib calls. This also simplifies error handling a bit. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-24Merge branch 'next' into for-linusDmitry Torokhov
2011-05-12Input: ads7846 - fix gpio_pendown configurationIgor Grinberg
The pendown gpio was requested but not configured for input. Configure it for input. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-12Input: ads7846 - add possibility to use external vref on ads7846Alexander Stein
Just set vref_mv in your platform config to use external vref. Otherwise the internal one is used. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-05Input: ads7846 - remove unused variable from struct ads7845_ser_reqAlexander Stein
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-05Input: ads7846 - make transfer buffers DMA safeAlexander Stein
req.sample needs its own cacheline otherwise accessing req.msg fetches it in again. Note: This effect doesn't occur if the underlying SPI driver doesn't use DMA at all. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-18Merge branch 'next' into for-linusDmitry Torokhov
2011-02-11Input: ads7846 - check proper condition when freeing gpioDmitry Torokhov
When driver uses custom pendown detection method gpio_pendown is not set up and so we should not try to free it, otherwise we are presented with: ------------[ cut here ]------------ WARNING: at drivers/gpio/gpiolib.c:1258 gpio_free+0x100/0x12c() Modules linked in: [<c0061208>] (unwind_backtrace+0x0/0xe4) from [<c0091f58>](warn_slowpath_common+0x4c/0x64) [<c0091f58>] (warn_slowpath_common+0x4c/0x64) from [<c0091f88>](warn_slowpath_null+0x18/0x1c) [<c0091f88>] (warn_slowpath_null+0x18/0x1c) from [<c024e610>](gpio_free+0x100/0x12c) [<c024e610>] (gpio_free+0x100/0x12c) from [<c03e9fbc>](ads7846_probe+0xa38/0xc5c) [<c03e9fbc>] (ads7846_probe+0xa38/0xc5c) from [<c02cff14>](spi_drv_probe+0x18/0x1c) [<c02cff14>] (spi_drv_probe+0x18/0x1c) from [<c028bca4>](driver_probe_device+0xc8/0x184) [<c028bca4>] (driver_probe_device+0xc8/0x184) from [<c028bdc8>](__driver_attach+0x68/0x8c) [<c028bdc8>] (__driver_attach+0x68/0x8c) from [<c028b4c8>](bus_for_each_dev+0x48/0x74) [<c028b4c8>] (bus_for_each_dev+0x48/0x74) from [<c028ae08>](bus_add_driver+0xa0/0x220) [<c028ae08>] (bus_add_driver+0xa0/0x220) from [<c028c0c0>](driver_register+0xa8/0x134) [<c028c0c0>] (driver_register+0xa8/0x134) from [<c0050550>](do_one_initcall+0xcc/0x1a4) [<c0050550>] (do_one_initcall+0xcc/0x1a4) from [<c00084e4>](kernel_init+0x14c/0x214) [<c00084e4>] (kernel_init+0x14c/0x214) from [<c005b494>](kernel_thread_exit+0x0/0x8) ---[ end trace 4053287f8a5ec18f ]--- Also rearrange ads7846_setup_pendown() to have only one exit point returning success. Reported-by: Sourav Poddar <sourav.poddar@ti.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Reviewed-by: Charulatha V <charu@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-20Input: ads7846 - convert to dev_pm_opsMark Brown
There is a move to deprecate bus-specific PM operations and move to using dev_pm_ops instead in order to reduce the amount of boilerplate code in buses and facilitate updates to the PM core. Do this move for the ads7846 driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-17Input: ads7846 - switch to using threaded IRQJason Wang
Commit 9114337 introduces regulator operations in ads7846 touchscreen driver. Among these operations, some are called while holding a spinlock. On many platforms regulators reside on slow buses, such as I2C/SPI and require sleep while accessing them. The touchscreen itself is also a SPI device and currently relies on asynchronous SPI access to avoid sleeping in interrupt context. Let's switch to using threaded IRQ to be able to access SPI bus synchronously (which simplifies driver a bit); it also allows safe access to the regulators as well. This has been tested on the ti_omap3530evm board: 1) using ts_lib after normal boot 2) using ts_lib after "#echo 1/0 > /sys/bus/spi/devices/spi0.1/disable" 3) using ts_lib after "#echo mem > /sys/power/state" and "wake up" Also tested on pandora. Based on original patch by Dmitry Torokhov. Tested-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-03Input: ads7846 - extend the driver for ads7845 controller supportAnatolij Gustschin
ADS7845 is a controller for 5-wire touch screens and somewhat different from 7846. It requires three serial communications to accomplish one complete conversion. Unlike 7846 it doesn't allow Z1-/Z2- position measurement. The patch extends the ads7846 driver to also support ads7845. The packet struct is extended to contain needed command and conversion buffers. ads7846_rx() and ads7846_rx_val() now differentiate between 7845 and 7846 case. ads7846_probe() is modified to setup ads7845 specific command and conversion messages and to switch ads7845 into power-down mode, since this is needed to be prepared to respond to pendown interrupts. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-03Input: ads7846 - do not allow altering platform dataDmitry Torokhov
Tested-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-28Input: ads7846 - allow specifying irq trigger type in platform dataAnatolij Gustschin
On some platforms, for example with GPIO interrupts on mpc5121, it is not possible to configure falling edge interrupts. Specifying irq trigger type in platform data structure allows using ads7846 driver on such platforms. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-02Input: ads7846 - fix compiler warning in ads7846_probe()Dmitry Torokhov
This patch fixes the follwing warning introduced by commit 067fb2f648543894ce775082c5636f4c32b99e4f ("Input: ads7846 - return error on regulator_get() failure"): drivers/input/touchscreen/ads7846.c: In function 'ads7846_probe': drivers/input/touchscreen/ads7846.c:1167: warning: format '%ld' expects type 'long int', but argument 4 has type 'int' Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-26Input: ads7846 - return error on regulator_get() failureKevin Hilman
In probe(), if regulator_get() failed, an error code was not being returned causing the driver to be successfully bound, even though probe failed. This in turn caused the suspend, resume and remove methods to be registered and accessed via the SPI core. Since these functions all access private driver data using pointers that had been freed during the failed probe, this would lead to unpredictable behavior. This patch ensures that probe() returns an error code in this failure case so the driver is not bound. Found using lockdep and noticing the lock used in the suspend/resum path pointed to a bogus lock due to the freed memory. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-11Input: ads7846 - add wakeup supportRanjith Lohithakshan
Add wakeup support to the ads7846 driver. Platforms can enable wakeup capability by setting the wakeup flag in ads7846_platform_data. With this patch the ads7846 driver can be used to wake the system from suspend. Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-09Input: ads7846 - add support for AD7843 partsMichael Hennerich
The AD7873 is almost identical to the ADS7846; the only difference is related to the Power Management bits PD0 and PD1. This results in a slightly different PENIRQ enable behavior. For the AD7873, VREF should be turned off during differential measurements. So, add the AD7873/43 to the list of driver supported devices, and prevent VREF usage during differential/ratiometric conversion modes. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-25Input: ads7846 - add regulator supportGrazvydas Ignotas
The ADS7846/TSC2046 touchscreen controllers can (and usually are) connected to various regulators for power, so add regulator support. Valid regulator will now be required, so boards without complete regulator setup should either disable regulator framework or enable CONFIG_REGULATOR_DUMMY. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-23Input: ads7846 - switch to using dev_vdbg()Pavel Machek
Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-23Input: ads7846 - fix pressure reportingPavel Machek
On Zaurus, hx4700 and others pressure is reported inverted -- the lighter the pressure, the bigger numerical value. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-23spi: prefix modalias with "spi:"Anton Vorontsov
This makes it consistent with other buses (platform, i2c, vio, ...). I'm not sure why we use the prefixes, but there must be a reason. This was easy enough to do it, and I did it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jean Delvare <khali@linux-fr.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Samuel Ortiz <sameo@openedhand.com> Cc: "John W. Linville" <linville@tuxdriver.com> Acked-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11Input: ads7846 - pin change interrupt supportMichael Roth
Some SoCs support only pin change interrupts on GPIO pins used as irq lines. The ads7846 core is not affected from the additional irqs on the rising edge because the code accounts touch bounce anyway by kicking in a timer and disabling the irq after the first request and reenabling the irq after a timeout when there is no longer pen down detected. Signed-off-by: Michael Roth <mroth@nessie.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-19Input: ads7846 - more detailed model name in sysfsMichael Roth
Signed-off-by: Michael Roth <mroth@nessie.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-19Input: ads7846 - support swapping x and y axesMichael Roth
Signed-off-by: Michael Roth <mroth@nessie.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-16Merge branch 'next' into for-linusDmitry Torokhov
2009-04-15Input: ads7846 - fix unsafe disable_irqBen Nizette
The use of disable_irq inside the handler for the interrupt being disabled has always been dangerous. disable_irq should wait for that handler to complete before returning -> deadlock. For some reason this wasn't actually the case until 3aa551c9b was merged but since this time, the ads7846 driver has deadlocked the system on first interrupt. Convert the driver to use the handler-safe _nosync variant. Signed-off-by: Ben Nizette <bn@niasdigital.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-11Input: ads7846 - introduce platform specific way to synchronize samplingEric Miao
Noises can be introduced when LCD signals are being driven, some platforms provide a signal to assist the synchronization of this sampling procedure. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-30trivial: Fix misspelling of "Celsius".Adam Buchbinder
A few comments say "Celcius"; this fixes them. No code changes. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits) Input: i8042 - add Dell Vostro 1510 to nomux list Input: gtco - use USB endpoint API Input: add support for Maple controller as a joystick Input: atkbd - broaden the Dell DMI signatures Input: HIL drivers - add MODULE_ALIAS() Input: map_to_7segment.h - convert to __inline__ for userspace Input: add support for enhanced rotary controller on pxa930 and pxa935 Input: add support for trackball on pxa930 and pxa935 Input: add da9034 touchscreen support Input: ads7846 - strict_strtoul takes unsigned long Input: make some variables and functions static Input: add tsc2007 based touchscreen driver Input: psmouse - add module parameters to control OLPC touchpad delays Input: i8042 - add Gigabyte M912 netbook to noloop exception table Input: atkbd - Samsung NC10 key repeat fix Input: atkbd - add keyboard quirk for HP Pavilion ZV6100 laptop Input: libps2 - handle 0xfc responses from devices Input: add support for Wacom W8001 penabled serial touchscreen Input: synaptics - report multi-taps only if supported by the device Input: add joystick driver for Walkera WK-0701 RC transmitter ...
2008-12-23Input: ads7846 - strict_strtoul takes unsigned longHarvey Harrison
Fix sparse warning introduced by: commit 160f1fef7e52e974489b3c70fbd4e094c06965c2 Input: convert drivers to use strict_strtoul() Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-11-25hrtimer: removing all ur callback modesPeter Zijlstra
Impact: cleanup, move all hrtimer processing into hardirq context This is an attempt at removing some of the hrtimer complexity by reducing the number of callback modes to 1. This means that all hrtimer callback functions will be ran from HARD-irq context. I went through all the 30 odd hrtimer callback functions in the kernel and saw only one that I'm not quite sure of, which is the one in net/can/bcm.c - hence I'm CC-ing the folks responsible for that code. Furthermore, the hrtimer core now calls callbacks directly with IRQs disabled in case you try to enqueue an expired timer. If this timer is a periodic timer (which should use hrtimer_forward() to advance its time) then it might be possible to end up in an inf. recursive loop due to the fact that hrtimer_forward() doesn't round up to the next timer granularity, and therefore keeps on calling the callback - obviously this needs a fix. Aside from that, this seems to compile and actually boot on my dual core test box - although I'm sure there are some bugs in, me not hitting any makes me certain :-) Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-30Input: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-10-09Input: ads7846 - fix cache line sharing issueDmitry Torokhov
We had a report a while back that the ads7846 driver had some issues when used with DMA-based SPI controllers (like atmel_spi) on systems where main memory is not DMA-coherent (most non-x86 boards). Allocate memory potentially used for DMA separately to avoid cache line issues. Reported-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-09-10Input: ads7846 - introduce .gpio_pendown to get pendown stateEric Miao
The GPIO connected to ADS7846 nPENIRQ signal is usually used to get the pendown state as well. Introduce a .gpio_pendown, and use this to decide the pendown state if .get_pendown_state is NULL. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-09-10Input: convert drivers to use strict_strtoul()Joe Rouvier
strict_strtoul() allows newline character at the end of the the input string and therefore is more user-friendly. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2008-07-23Input: ads7846 - optimize order of calculating Rt in ads7846_rx()Hans-Christian Egtvedt
Alter the if expression for calculating Rt. The old implementation would run unnecessary code when the ADS7843 device was used. The patch also fixes the code style to kernel standard. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-23Input: ads7846 - fix sparse endian warningsHarvey Harrison
Also remove the temporary pointer and use ->rx_buf directly. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits) Input: wacom - add support for Cintiq 20WSX Input: ucb1400_ts - IRQ probe fix Input: at32psif - update MODULE_AUTHOR with new email Input: mac_hid - add lockdep annotation to emumousebtn Input: i8042 - fix incorrect usage of strncpy and strncat Input: bf54x-keys - add infrastructure for keypad wakeups Input: add MODULE_ALIAS() to hotpluggable platform modules Input: drivers/char/keyboard.c - use time_after Input: fix ordering in joystick Makefile Input: wm97xx-core - support use as a wakeup source Input: wm97xx-core - use IRQF_SAMPLE_RANDOM Input: wm97xx-core - only schedule interrupt handler if not already scheduled Input: add Zhen Hua driver Input: aiptek - add support for Genius G-PEN 560 tablet Input: wacom - implement suspend and autosuspend Input: xpad - set proper buffer length for outgoing requests Input: omap-keypad - fix build warning Input: gpio_keys - irq handling cleanup Input: add PS/2 serio driver for AVR32 devices Input: put ledstate in the keyboard notifier ...
2008-04-14ARM: OMAP: 5912 OSK GPIO updatesDavid Brownell
Start cleaning up GPIO handling for OMAP5912 OSK board: - Initialize GPIOs using the cross-platform calls, not the old OMAP-private ones. - Move touchscreen setup out of ads7846 code into board-specfic setup code, where it belongs. This doesn't depend on the patches to update OMAP to use the gpiolib implementation framework. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-02Input: ads7846 - simplify support of external vREF (and ads7843)David Brownell
This updates the ads7846 driver to handle external vREF (required on boards using ads7843 chips) without module parameters, and also removes a needless variable with its associated bogus gcc warning. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-03-14Input: ads7846 - fix uninitialized var warningAndrew Morton
drivers/input/touchscreen/ads7846.c: In function 'ads7846_read12_ser': drivers/input/touchscreen/ads7846.c:216: warning: 'sample' may be used uninitialized in this function Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-02-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (34 commits) Input: i8042 - non-x86 build fix Input: pxa27x_keypad - also enable on PXA3xx Input: pxa27x_keypad - add debounce_interval to the keypad platform data Input: pxa27x_keypad - use device resources for I/O memory mapping and IRQ Input: pxa27x_keypad - enable rotary encoders and direct keys Input: pxa27x_keypad - introduce pxa27x_keypad_config() Input: pxa27x_keypad - introduce driver structure and use KEY() to define matrix keys Input: pxa27x_keypad - remove pin configuration from the driver Input: pxa27x_keypad - rename the driver (was pxa27x_keyboard) Input: constify function pointer tables (seq_operations) Input: i8042 - add Fujitsu-Siemens Amilo Pro 2010 to nomux list Input: i8042 - enable DMI quirks on x86-64 Input: i8042 - add Dritek quirk for Acer Aspire 9110 Input: add input event to APM event bridge Input: mousedev - use BIT_MASK instead of BIT Input: remove duplicate includes Input: remove cdev from input_dev structure Input: remove duplicated headers in drivers/char/keyboard.c Input: i8042 - add Dritek keyboard extension quirk Input: add Tosa keyboard driver ...
2008-01-21Input: ads7846 - stop updating dev->power.power_stateDavid Brownell
This stops the ads7846 driver from using dev->power.power_state; that field is deprecated (overdue for removal) and the only reason to update it was to make the /sys/devices/.../power/state files (now removed) work better. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-12-05spi: use simplified spi_sync() calling conventionMarc Pignat
Given the patch which simplifies the spi_sync calling convention, this one updates the callers of that routine which tried using it according to the previous specification. (Most didn't.) Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19get rid of input BIT* duplicate definesJiri Slaby
get rid of input BIT* duplicate defines use newly global defined macros for input layer. Also remove includes of input.h from non-input sources only for BIT macro definiton. Define the macro temporarily in local manner, all those local definitons will be removed further in this patchset (to not break bisecting). BIT macro will be globally defined (1<<x) Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: <dtor@mail.ru> Acked-by: Jiri Kosina <jkosina@suse.cz> Cc: <lenb@kernel.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: <perex@suse.cz> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <vernux@us.ibm.com> Cc: <malattia@linux.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 03:15:34 +0000