summaryrefslogtreecommitdiff
path: root/drivers/input/tablet/wacom_wac.c
AgeCommit message (Collapse)Author
2012-05-02Input: wacom - use dev_xxx() instead of naked printk()s and dbg()sDmitry Torokhov
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-29Input: wacom - add 0xE5 (MT device) supportPing Cheng
Main part of patch is adding support for a new Wacom MT touch packet and labels these devices using MTSCREEN type. Other items of interest: Delete some duplicate code in HID parsing for Y info since its already done in X path. In wacom_query_tablet_data(), only invoke the set report that requests tablets to send Wacom Touch packets for Finger interfaces. Mostly, this is to make code intent clear. Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-29Input: wacom - retrieve maximum number of touch pointsPing Cheng
From the HID usage table when it is supported. Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-21Merge commit 'v3.4-rc4' into nextDmitry Torokhov
2012-04-04Input: wacom - add Intuos5 multitouch sensor supportJason Gerecke
Intuos5 tablets with PTH-* model numbers include a multitouch sensor which use the same touch reports as the 3rd-generation Bamboo. No useful information is in the HID descriptor for the touch interface so hardcoded values are used during setup. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-04Input: wacom - add Intuos5 Touch Ring/ExpressKey supportJason Gerecke
Intuos5 uses a new report type for Touch Ring and ExpressKey data. Note that data from the capacitive sensors present on the ExpressKeys will be ignored until a proper way is found to expose it. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-04Input: wacom - add basic Intuos5 supportJason Gerecke
This patch adds support for the basic pen functions of Intuos5 tablets. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Tested-by: Timo Aaltonen <tjaalton@ubuntu.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-27Merge branch 'next' into for-linusDmitry Torokhov
Conflicts: drivers/input/tablet/wacom_sys.c
2012-03-25Input: wacom - wireless battery statusChris Bagwell
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-25Input: wacom - create inputs when wireless connectChris Bagwell
When a tablet connect or disconnect is detected, schedule work queue to register or unregister related input devices. When a wireless tablet connects, it reports same USB PID used if tablet is connected with USB cable. Use this to update features values, set input capabilities, and then register device. From there, the Pen and Touch interfaces will reuse the existing tablet's IRQ routines. Its possible that 1 receiver is shared with 2 tablets with different PID (small and medium Bamboo for example) so the input is unregister at disconnect to better support this case. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-25Input: wacom - wireless monitor frameworkChris Bagwell
The 3rd gen Bamboo Pen & Touch and Intuos5 tablets support an optional wireless module. When its receiver is plugged into USB, it presents 3 interfaces: 0) Monitor 1) Pen and 2) Touch. The exact capabilities of the Pen and Touch interfaces can not be determined until a tablet connection is established and reported over the Monitor interface. This patch detects this wireless receiver and enables interrupt packets to be processed for the Monitor interface. Processing the data in packets will be left to another patch. Since it doesn't make sense to create an input device for the Monitor interface, it is not created. Creation of Pen and Touch input device is also delayed until monitor packets can be processed. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-19Merge branch 'next' into for-linusDmitry Torokhov
2012-03-09Merge commit 'v3.3-rc6' into nextDmitry Torokhov
2012-03-07Input: wacom - fix 3rd-gen Bamboo MT when 4+ fingers are in useJason Gerecke
The message count field uses three bits of storage, not two. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-31Input: wacom - use switch statement for wacom_tpc_irq()Ping Cheng
And add two new data formats. Tested-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-31Input: wacom - use BTN_TOOL_FINGER to indicate touch device typePing Cheng
Tested-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-08Merge branch 'next' into for-linusDmitry Torokhov
2011-12-12Input: wacom - add support for Cintiq 24HDJason Gerecke
Adds support for the Cintiq 24HD. There are two quirks about this model that haven't been seen in prior tablets. First, a second touch ring is present on this display; it is being exposed via the ABS_THROTTLE axis. Second, three capacitive buttons at the top of the unit are available; though physically a touch strip, we report the use of these buttons with generic KEY_ events. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-12Input: wacom - add product id used by Samsung Slate 7Chris Bagwell
New product ID reported by Harvey Braun on linuxwacom mailing list and also tested this patch with new hardware. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Ping Cheng <pinglinux@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-29Merge commit 'v3.2-rc3' into nextDmitry Torokhov
2011-11-07Input: wacom - ignore unwanted bamboo packetsChris Bagwell
Bamboo's Pen and Touch packets always start with a value of 0x02 in first byte. In 3rd gen Bamboo's, the hw is now periodically sending some additional packets with unrelated data and uses a value other than 0x02 to inform driver this. Ignore those packets now. This was reported by users as bad behavior in Gimp. The invalid packets being processed made the stylus report out of proximity for the 1 packet and this triggered some secondary bug which caused Gimp to stop drawing until user really took pen out of proximity of tablet. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-26Input: wacom - 3rd gen Bamboo P&Touch packet supportChris Bagwell
3rd generation Bamboo Pen and Touch tablets reuse the older stylus packet but add an extra fixed zero pad byte to end. The touch packets are quite different since it supports tracking of up to 16 touches. The packet is 64-byte fixed size but contains up to 15 smaller messages indicating data for a single touch or for tablet button presses. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-26Input: wacom - relax Bamboo stylus ID checkChris Bagwell
Bit 0x02 always means tip versus eraser. Bit 0x01 is something related to version of stylus and different values are starting to be used. Relaxing proximity check is required to be used with 3rd generation Bamboo Pen and Touch tablets. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-26Merge branch 'next' into for-linusDmitry Torokhov
2011-10-10Input: wacom - correct max Y value on medium bamboosChris Bagwell
Medium size Bamboo P&T driver reused max X/Y form older Bamboo 1 medium size tablets and never updated to real value. Actual active area of tablet is slightly larger in Y direction. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10Input: wacom - add ABS_DISTANCE to Bamboo Pen reportsChris Bagwell
Tablet reports a distance of 0 right at highest point possible to be in proximity and distance_max when touching tablet. Inverse the distance since user land has no way of knowing ABS_DISTANCE is not distance from tablet. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10Input: wacom - remove unneeded touch pressure initializationChris Bagwell
These were left in during removal of touch pressure reports but not needed now. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-04Input: wacom - revert "Cintiq 21UX2 does not have menu strips"Jason Gerecke
This reverts commit 71c86ce59791bcd67af937bbea719a508079d7c2. The 21UX2 does have touchstrips, but they are in a somewhat- hidden location. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pinglinux@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-12Input: wacom - fix touch parsing on newer BamboosChris Bagwell
Bamboos with Product ID's > 0xD4 return values unrelated to pressure in touch 1 pressure field. They also report 2nd touch X/Y values shifted down 1 byte (where pressure was). This results in jumpy 1 finger touch and totally invalid 2nd finger data. For touch detection, switch to a Touch Present single bit that all versions of Bamboo support. For touch 2 offset, calculate offset based on a bit that is set different between the two packet layouts. Since touch pressure reports were removed from driver, there was no need to be reading pressure any more. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Ping Cheng <pinglinux@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-08Input: wacom - add POINTER and DIRECT device propertiesJason Gerecke
Adds INPUT_PROP_POINTER or INPUT_PROP_DIRECT as necessary to the hardware supported by the Wacom driver. The DIRECT property is assigned to devices with an embedded screen (i.e. touchscreens and display tablets). The POINTER property is assigned to those without embedded screens. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-26Input: wacom - advertise BTN_TOOL_PEN and BTN_STYLUS for PenPartnerJason Gerecke
The Wacom PenPartner should advertise its stylus tip and button in addition to the eraser tool. These are both physically present on the hardware, and emitted from 'wacom_penpartner_irq'. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-26Input: wacom - remove pressure for touch devicesPing Cheng
Touch devices do not report valid pressure or capacitance. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-16Input: wacom - add support for the Wacom Bamboo Pen (CTL-660/K)Gerard Braad
Signed-off-by: Gerard Braad <me@gbraad.nl> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06Input: wacom - cleanup a return value for the old BambooPing Cheng
The old code may call input_sync() without sending any other events. While it will be suppressed by the input core not calling it at all is still cheaper. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06Input: wacom - update Graphire4 and old Bamboo tablet buttonsPing Cheng
Bamboo touch sets BTN_BACK, BTN_FORWARD, BTN_LEFT, and BTN_RIGHT as the default button events for tablet buttons. Change Graphire4 and old Bamboo to the same settings. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06Input: wacom - add serial number for Graphire4 and old BambooPing Cheng
With the removal of BTN_TOOL_FINGER for tablet buttons and expresskeys, serial number is needed to distingush if the events were from a regular tool (stylus, eraser, or mouse) or the attribures (buttons, strips, or wheels) on the tablet since there are overlapped events between the tools and the tablet attributes. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06Input: wacom - remove BTN_TOOL_FINGER for padPing Cheng
BTN_TOOL_FINGER was designed to indicate a single finger touch. Remove the lines that borrowed this type for expresskeys and tablet buttons. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-27Input: wacom - add 3 new models - 6A, 6B, and 97Ping Cheng
Tested-by: Alex Tervoort <alex.tervoort@gmail.com> for 6A Signed-off-by: David Foley <favux.is@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-27Input: wacom - Wacom Bamboo Pen D4 has 1024 pressure levelsPing Cheng
D4 has 1024, not 512, pressure levels. Reported-by: David Foley <favux.is@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-22Input: wacom - use only one interface with DTU-2231Aristeu Rozanski
The Wacom DTU-2231 tablet has two interfaces on its default configuration and both have HID class, leading to the creation of two input devices instead of one. Only the first one is used, so filter out the second. Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-22Input: wacom - Cintiq 21UX2 does not have menu stripsPing Cheng
So don't set ABS_RX/ABS_RY for them. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-31Input: wacom - add support for Lenovo tablet ID (0xE6)Manoj Iyer
Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-26Input: wacom - report resolution for pen devicesPing Cheng
Touch resolution is reported to the userland by retrieving the value from the HID descriptor. But pen resolution is not since it can not be retrieved. The current Wacom X driver has a resolution table. To centralize the source of these values, the resolution entries are added in the wacom_features struct for x and y coordinates respectively. The values are then reported to the userland. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-26Input: wacom - constify wacom_features for a new missed Bamboo modelsPing Cheng
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-12Input: wacom - support 2FGT in MT formatPing Cheng
Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-12Input: wacom - support one finger touch the touchscreen wayPing Cheng
There are two types of 1FGT devices supported in wacom_wac.c. Changing them to follow the existing touchscreen format, i.e., only report BTN_TOUCH as a valid tool type. Touch data will be ignored if pen is in proximity. This requires a touch up event sent if touch was down when pen comes in. The touch up event should be sent before any pen events are emitted. Otherwise, two pointers would race for the cursor. However, we can not send a touch up inside wacom_tpc_pen since pen and touch are on different logical port. That is why we have to check if touch is up before sending pen events. Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-12Input: wacom - process pen data in its own routinePing Cheng
So it would be easier for patch reviewers to follow the data path. Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-12Input: wacom - do not send 2FGT Tablet PC events in TAP formatPing Cheng
2FGT Tablet PC touch events were processed in _TAP_ format. Remove them so we can change to _MT_ format. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-25Input: wacom - pass touch resolution to clients through input_absinfoPing Cheng
Also remove fake ABS_RX/ABS_RY "axes" that were used to report physical dimensions now that we have better way. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-24Input: wacom - add 2 Bamboo Pen and touch modelsPing Cheng
Reported-by: David Foley <favux.is@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 21:17:37 +0000