summaryrefslogtreecommitdiff
path: root/drivers/input/misc
AgeCommit message (Collapse)Author
2019-03-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - update the ili210x touchscreen driver, refreshing the code and adding support for ILI251X line - add support for st1633 to the st1232 touchscreen driver - add support for sx8650 to the the sx8654 touchscreen driver - add support for Evervision FT5726 to the edt-ft5x06 touchscreen driver - add support for gt5688 to the Goodix touchscreen driver - new vibrator driver for MSM SOCs - miscellaneous fixes for the rest of input drivers * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (53 commits) Input: wacom_serial4 - add support for Wacom ArtPad II tablet Input: elan_i2c - add id for touchpad found in Lenovo s21e-20 Input: raspberrypi-ts - select CONFIG_INPUT_POLLDEV Input: msm-vibrator - use correct gpio header Input: ti_am335x_tsc - remove set but not used variable 'tscadc_dev' Input: i8042 - rework DT node name comparisons Input: goodix - print values in case of inconsistencies Input: goodix - refer to touchscreen.txt in device tree bindings Input: goodix - support Goodix gt5688 Input: synaptics_i2c - remove redundant spinlock Input: db9 - mark expected switch fall-through Input: qt2160 - remove redundant spinlock Input: st1232 - handle common DT bindings Input: ims-pcu - switch to using brightness_set_blocking() Input: st1232 - switch to gpiod API Input: ili210x - fetch touchscreen geometry from DT Input: msm-vibrator - tweak an error message Input: tm2-touchkey - acknowledge that setting brightness is a blocking call Input: stmfts - acknowledge that setting brightness is a blocking call Input: ili210x - switch to using devm_device_add_group() ...
2019-03-09Input: msm-vibrator - use correct gpio headerArnd Bergmann
When CONFIG_GPIOLIB is not set, we get a couple of build errors during test building: drivers/input/misc/msm-vibrator.c: In function 'msm_vibrator_start': drivers/input/misc/msm-vibrator.c:79:3: error: implicit declaration of function 'gpiod_set_value_cansleep'; did you mean 'gpio_set_value_cansleep'? [-Werror=implicit-function-declaration] gpiod_set_value_cansleep(vibrator->enable_gpio, 1); ^~~~~~~~~~~~~~~~~~~~~~~~ gpio_set_value_cansleep drivers/input/misc/msm-vibrator.c: In function 'msm_vibrator_probe': drivers/input/misc/msm-vibrator.c:176:26: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'devm_gpio_free'? [-Werror=implicit-function-declaration] vibrator->enable_gpio = devm_gpiod_get(&pdev->dev, "enable", ^~~~~~~~~~~~~~ devm_gpio_free drivers/input/misc/msm-vibrator.c:177:13: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'? GPIOD_OUT_LOW); ^~~~~~~~~~~~~ GPIOF_INIT_LOW drivers/input/misc/msm-vibrator.c:177:13: note: each undeclared identifier is reported only once for each function it appears in This is easy to avoid when we use gpio/consumer.h as the documented interface. Fixes: 0f681d09e66e ("Input: add new vibrator driver for various MSM SOCs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-03-08Merge tag 'mfd-next-5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add STMPE ADC Input driver - Add STMicroelectronics STPMIC1 Parent driver - Add STMicroelectronics STPMIC1 OnKey Misc driver - Add STMicroelectronics STPMIC1 Watchdog driver - Add Cirrus Logic Lochnagar Parent driver - Add TQ-Systems TQMX86 Parent driver New Device Support: - Add support for ADC to STMPE New (or moved) Functionality: - Move Lightbar functionality to its own driver; cros_ec_lightbar - Move VBC functionality to its own driver; cros_ec_vbc - Move VBC functionality to its own driver; cros_ec_vbc - Move DebugFS functionality to its own driver; cros_ec_debugfs - Move SYSFS functionality to its own driver; cros_ec_sysfs - Add support for input voltage options; tps65218 Fixes: - Use devm_* managed resources; cros_ec - Device Tree documentation; stmpe, aspeed-lpc, lochnagar - Trivial Clean-ups; stmpe - Rip out broken modular code; aat2870-core, adp5520, as3711, db8500-prcmu, htc-i2cpld, max8925-core, rc5t583, sta2x11-mfd, syscon, tps65090, tps65910, tps68470 tps80031, wm831x-spi, wm831x-i2c, wm831x-core, wm8350-i2c, wm8350-core, wm8400-core - Kconfig fixups; INTEL_SOC_PMIC - Improve error path; sm501, sec-core - Use struct_size() helper; sm501 - Constify; at91-usart - Use pointers instead of copying data; at91-usart - Deliver proper return value; cros_ec_dev - Trivial formatting/whitespace; sec-core" * tag 'mfd-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits) mfd: mxs-lradc: Mark expected switch fall-through mfd: sec-core: Cleanup formatting to a consistent style mfd: tqmx86: IO controller with I2C, Wachdog and GPIO mfd: intel-lpss: Move linux/pm.h to the local header mfd: cros_ec_dev: Return number of bytes read with CROS_EC_DEV_IOCRDMEM mfd: tps68470: Drop unused MODULE_DEVICE_TABLE mfd: at91-usart: No need to copy mfd_cell in probe mfd: at91-usart: Constify at91_usart_spi_subdev and at91_usart_serial_subdev mfd: lochnagar: Add support for the Cirrus Logic Lochnagar mfd: lochnagar: Add initial binding documentation dt-bindings: mfd: aspeed-lpc: Make parameter optional mfd: sec-core: Return gracefully instead of BUG() if device cannot match mfd: sm501: Use struct_size() in devm_kzalloc() mfd: sm501: Fix potential NULL pointer dereference mfd: Kconfig: Fix I2C_DESIGNWARE_PLATFORM dependencies mfd: tps65218.c: Add input voltage options mfd: wm8400-core: Make it explicitly non-modular mfd: wm8350-core: Drop unused module infrastructure from non-modular code mfd: wm8350-i2c: Make it explicitly non-modular mfd: wm831x-core: Drop unused module infrastructure from non-modular code ...
2019-03-03Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 5.1 merge window.
2019-02-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - tweaks to Elan drivers (both PS/2 and I2C) to support new devices. Also revert of one of IDs as that device should really be driven by i2c-hid + hid-multitouch - a few drivers have been switched to set_brightness_blocking() call because they either were sleeping the their set_brightness() implementation or used workqueue but were not canceling it on unbind. - ps2-gpio and matrix_keypad needed to [properly] flush their works to avoid potential use-after-free on unbind. - other miscellaneous fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add ACPI ID for touchpad in Lenovo V330-15ISK Input: st-keyscan - fix potential zalloc NULL dereference Input: apanel - switch to using brightness_set_blocking() Revert "Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G" Input: qt2160 - switch to using brightness_set_blocking() Input: matrix_keypad - use flush_delayed_work() Input: ps2-gpio - flush TX work when closing port Input: cap11xx - switch to using set_brightness_blocking() Input: elantech - enable 3rd button support on Fujitsu CELSIUS H780 Input: bma150 - register input device after setting private data Input: pwm-vibra - stop regulator after disabling pwm, not before Input: pwm-vibra - prevent unbalanced regulator Input: snvs_pwrkey - allow selecting driver for i.MX 7D
2019-02-16Input: apanel - switch to using brightness_set_blocking()Dmitry Torokhov
Now that LEDs core allows "blocking" flavor of "set brightness" method we can use it and get rid of private work item. As a bonus, we are no longer forgetting to cancel it when we unbind the driver. Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-16Input: ims-pcu - switch to using brightness_set_blocking()Dmitry Torokhov
Now that LEDs core allows "blocking" flavor of "set brightness" method we can use it and get rid of private work item. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-09Input: msm-vibrator - tweak an error messageDan Carpenter
The PTR_ERR(NULL) value is zero and it's not useful to print that. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-06Input: bma150 - register input device after setting private dataJonathan Bakker
Otherwise we introduce a race condition where userspace can request input before we're ready leading to null pointer dereference such as input: bma150 as /devices/platform/i2c-gpio-2/i2c-5/5-0038/input/input3 Unable to handle kernel NULL pointer dereference at virtual address 00000018 pgd = (ptrval) [00000018] *pgd=55dac831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: bma150 input_polldev [last unloaded: bma150] CPU: 0 PID: 2870 Comm: accelerometer Not tainted 5.0.0-rc3-dirty #46 Hardware name: Samsung S5PC110/S5PV210-based board PC is at input_event+0x8/0x60 LR is at bma150_report_xyz+0x9c/0xe0 [bma150] pc : [<80450f70>] lr : [<7f0a614c>] psr: 800d0013 sp : a4c1fd78 ip : 00000081 fp : 00020000 r10: 00000000 r9 : a5e2944c r8 : a7455000 r7 : 00000016 r6 : 00000101 r5 : a7617940 r4 : 80909048 r3 : fffffff2 r2 : 00000000 r1 : 00000003 r0 : 00000000 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 54e34019 DAC: 00000051 Process accelerometer (pid: 2870, stack limit = 0x(ptrval)) Stackck: (0xa4c1fd78 to 0xa4c20000) fd60: fffffff3 fc813f6c fd80: 40410581 d7530ce3 a5e2817c a7617f00 a5e29404 a5e2817c 00000000 7f008324 fda0: a5e28000 8044f59c a5fdd9d0 a5e2945c a46a4a00 a5e29668 a7455000 80454f10 fdc0: 80909048 a5e29668 a5fdd9d0 a46a4a00 806316d0 00000000 a46a4a00 801df5f0 fde0: 00000000 d7530ce3 a4c1fec0 a46a4a00 00000000 a5fdd9d0 a46a4a08 801df53c fe00: 00000000 801d74bc a4c1fec0 00000000 a4c1ff70 00000000 a7038da8 00000000 fe20: a46a4a00 801e91fc a411bbe0 801f2e88 00000004 00000000 80909048 00000041 fe40: 00000000 00020000 00000000 dead4ead a6a88da0 00000000 ffffe000 806fcae8 fe60: a4c1fec8 00000000 80909048 00000002 a5fdd9d0 a7660110 a411bab0 00000001 fe80: dead4ead ffffffff ffffffff a4c1fe8c a4c1fe8c d7530ce3 20000013 80909048 fea0: 80909048 a4c1ff70 00000001 fffff000 a4c1e000 00000005 00026038 801eabd8 fec0: a7660110 a411bab0 b9394901 00000006 a696201b 76fb3000 00000000 a7039720 fee0: a5fdd9d0 00000101 00000002 00000096 00000000 00000000 00000000 a4c1ff00 ff00: a6b310f4 805cb174 a6b310f4 00000010 00000fe0 00000010 a4c1e000 d7530ce3 ff20: 00000003 a5f41400 a5f41424 00000000 a6962000 00000000 00000003 00000002 ff40: ffffff9c 000a0000 80909048 d7530ce3 a6962000 00000003 80909048 ffffff9c ff60: a6962000 801d890c 00000000 00000000 00020000 a7590000 00000004 00000100 ff80: 00000001 d7530ce3 000288b8 00026320 000288b8 00000005 80101204 a4c1e000 ffa0: 00000005 80101000 000288b8 00026320 000288b8 000a0000 00000000 00000000 ffc0: 000288b8 00026320 000288b8 00000005 7eef3bac 000264e8 00028ad8 00026038 ffe0: 00000005 7eef3300 76f76e91 76f78546 800d0030 000288b8 00000000 00000000 [<80450f70>] (input_event) from [<a5e2817c>] (0xa5e2817c) Code: e1a08148 eaffffa8 e351001f 812fff1e (e590c018) ---[ end trace 1c691ee85f2ff243 ]--- Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-06Input: add new vibrator driver for various MSM SOCsBrian Masney
This patch adds a new vibrator driver that supports various Qualcomm MSM SOCs. Driver was tested on a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-28Input: pwm-vibra - stop regulator after disabling pwm, not beforePaweł Chmiel
This patch fixes order of disable calls in pwm_vibrator_stop. Currently when starting device, we first enable vcc regulator and then setup and enable pwm. When stopping, we should do this in oposite order, so first disable pwm and then disable regulator. Previously order was the same as in start. Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-28Input: pwm-vibra - prevent unbalanced regulatorJonathan Bakker
pwm_vibrator_stop disables the regulator, but it can be called from multiple places, even when the regulator is already disabled. Fix this by using regulator_is_enabled check when starting and stopping device. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A fixup for the input_event fix for y2038 Sparc64, and couple other minor fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: input_event - fix the CONFIG_SPARC64 mixup Input: olpc_apsp - assign priv->dev earlier Input: uinput - fix undefined behavior in uinput_validate_absinfo() Input: raspberrypi-ts - fix link error Input: xpad - add support for SteelSeries Stratus Duo Input: input_event - provide override for sparc64
2019-01-16input: stpmic1: Add STPMIC1 onkey driverPascal PAILLET-LME
The STPMIC1 pmic is able to manage an onkey button. This driver exposes the STPMIC1 onkey as an input device. It can also be configured to shut-down the power supplies on a long key-press with an adjustable duration. Signed-off-by: Pascal Paillet <p.paillet@st.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-14Input: uinput - fix undefined behavior in uinput_validate_absinfo()Dmitry Torokhov
An integer overflow may arise in uinput_validate_absinfo() if "max - min" can't be represented by an "int". We should check for overflow before trying to use the result. Reported-by: Kyungtae Kim <kt0755@gmail.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-14Merge tag 'v4.20' into for-linusDmitry Torokhov
Sync with mainline to get linux/overflow.h among other things.
2019-01-13Merge tag 'v4.20' into nextDmitry Torokhov
Merge with mainline to bring in the new APIs.
2019-01-04Input: soc_button_array - fix mapping of the 5th GPIO in a PNP0C40 deviceHans de Goede
The Microsoft documenation for the PNP0C40 device aka the "Windows-compatible button array" describes the 5th GpioInt listed in the resources as: '5. Interrupt corresponding to the "Rotation Lock" button, if supported'. Notice this describes the 5th entry as a button while we sofar have been mapping it to EV_SW, SW_ROTATE_LOCK. On my Point of View TAB P1006W-232 which actually comes with a rotation-lock button, the button indeed is a button and not a slider/switch. An image search for other Windows tablets has found 2 more models with a rotation-lock button and on both of those it too is a push-button and not a slider/switch. Further evidence can be found in the HUT extension HUTRR52 from Microsoft which adds rotation lock support to the HUT, which describes 2 different usages: "0xC9 System Display Rotation Lock Button" and "0xCA System Display Rotation Lock Slider Switch" note that switch is seen as a separate thing here and the non switch wording is an exact match for the "Windows-compatible button array" spec wording. TL;DR: our current mapping of the 5th GPIO to SW_ROTATE_LOCK is wrong because the 5th GPIO is for a push-button not a switch. This commit fixes this by maping the 5th GPIO to KEY_ROTATE_LOCK_TOGGLE. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-04Input: soc_button_array - add usage-page 0x01 usage-id 0xca mappingHans de Goede
The ACPI0011 _DSD button descriptor on a CHT based Intel Compute Sticks contains a mapping for usage-page 0x01 usage-id 0xca. As described in hutrr52_system_display_rotation_lock_controls_0.pdf this should be mapped as a "System Display Rotation Lock Slider Switch", this commit adds support for this, silencing the following warning: soc_button_array ACPI0011:00: Unknown button index 4 upage 01 usage ca, ignoring Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A tiny pull request this merge window unfortunately, should get more material in for the next release: - new driver for Raspberry Pi's touchscreen (firmware interface) - miscellaneous input driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G Input: atmel_mxt_ts - don't try to free unallocated kernel memory Input: drv2667 - fix indentation issues Input: touchscreen - fix coding style issue Input: add official Raspberry Pi's touchscreen driver Input: nomadik-ske-keypad - fix a loop timeout test Input: rotary-encoder - don't log EPROBE_DEFER to kernel log Input: olpc_apsp - remove set but not used variable 'np' Input: olpc_apsp - enable the SP clock Input: olpc_apsp - check FIFO status on open(), not probe() Input: olpc_apsp - drop CONFIG_OLPC dependency clk: mmp2: add SP clock dt-bindings: marvell,mmp2: Add clock id for the SP clock Input: ad7879 - drop platform data support
2018-12-28Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 4.21 merge window.
2018-12-21Input: drv2667 - fix indentation issuesColin Ian King
There are some statements that are indented incorrectly, fix this by removing the extra tabs. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-10Input: hp_sdc_rtc - Switch to use %ptRAndy Shevchenko
Use %ptR instead of open coded variant to print content of struct rtc_time in human readable format. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-08Input: rotary-encoder - don't log EPROBE_DEFER to kernel logUwe Kleine-König
When a driver fails to bind because a resource it still missing it's not helpful to report this as (usually) probing is repeated later. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Just random driver fixups, nothing exiting" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - avoid using uninitialized variable when probing Input: xen-kbdfront - mark expected switch fall-through Input: atmel_mxt_ts - mark expected switch fall-through Input: cyapa - mark expected switch fall-throughs Input: wm97xx-ts - fix exit path Input: of_touchscreen - add support for touchscreen-min-x|y Input: Fix DIR-685 touchkeys MAINTAINERS entry Input: elants_i2c - use DMA safe i2c when possible Input: silead - try firmware reload after unsuccessful resume Input: st1232 - set INPUT_PROP_DIRECT property Input: xilinx_ps2 - convert to using %pOFn instead of device_node.name Input: atmel_mxt_ts - fix multiple <linux/property.h> includes Input: sun4i-lradc - convert to using %pOFn instead of device_node.name Input: pwm-vibrator - correct pwms in DT binding example
2018-10-22Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 4.20 merge window.
2018-10-16Input: xen-kbdfront - mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I placed the "fall through" part at the beginning of the code comment, which is what GCC is expecting to find. Addresses-Coverity-ID: 114757 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-12Merge branch 'for-linus' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Dmitry writes: "Input updates for v4.19-rc7 - we added a few scheduling points into various input interfaces to ensure that large writes will not cause RCU stalls - fixed configuring PS/2 keyboards as wakeup devices on newer platforms - added a new Xbox gamepad ID." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: uinput - add a schedule point in uinput_inject_events() Input: evdev - add a schedule point in evdev_write() Input: mousedev - add a schedule point in mousedev_write() Input: i8042 - enable keyboard wakeups by default when s2idle is used Input: xpad - add support for Xbox1 PDP Camo series gamepad
2018-10-05Input: uinput - add a schedule point in uinput_inject_events()Dmitry Torokhov
Large writes to uinput interface may cause rcu stalls. Let's add cond_resched() to the loop to avoid this. Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-09-28Merge branch 'for-linus' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Dmitry writes: "Input updates for v4.19-rc5 Just a few driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: uinput - allow for max == min during input_absinfo validation Input: elantech - enable middle button of touchpad on ThinkPad P72 Input: atakbd - fix Atari CapsLock behaviour Input: atakbd - fix Atari keymap Input: egalax_ts - add system wakeup support Input: gpio-keys - fix a documentation index issue
2018-09-18Input: uinput - allow for max == min during input_absinfo validationPeter Hutterer
These values are inclusive, so a range of 1 requires min == max. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Reviewed-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-08-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for Rohm BU21029 touch controller - new bitmap APIs: bitmap_alloc, bitmap_zalloc and bitmap_free - updates to Atmel, eeti. pxrc and iforce drivers - assorted driver cleanups and fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) MAINTAINERS: Add PhoenixRC Flight Controller Adapter Input: do not use WARN() in input_alloc_absinfo() Input: mark expected switch fall-throughs Input: raydium_i2c_ts - use true and false for boolean values Input: evdev - switch to bitmap API Input: gpio-keys - switch to bitmap_zalloc() Input: elan_i2c_smbus - cast sizeof to int for comparison bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free() md: Avoid namespace collision with bitmap API dm: Avoid namespace collision with bitmap API Input: pm8941-pwrkey - add resin entry Input: pm8941-pwrkey - abstract register offsets and event code Input: iforce - reorganize joystick configuration lists Input: atmel_mxt_ts - move completion to after config crc is updated Input: atmel_mxt_ts - don't report zero pressure from T9 Input: atmel_mxt_ts - zero terminate config firmware file Input: atmel_mxt_ts - refactor config update code to add context struct Input: atmel_mxt_ts - config CRC may start at T71 Input: atmel_mxt_ts - remove unnecessary debug on ENOMEM Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURE ...
2018-07-30Input: pm8941-pwrkey - add resin entryVinod Koul
Since handling is abstracted in this driver, we need to add resin entry in id table along with pwrkey_data. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-30Input: pm8941-pwrkey - abstract register offsets and event codeVinod Koul
In order to support resin thru the pwrkey driver (they are very similar in nature) we need to abstract the handling in this driver. First we abstract pull_up_bit and status_bit along in driver data. The event code sent for key events is quiried from DT. Since the device can be child of pon lookup regmap and reg from parent if lookup fails (we are child). Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Input: yealink - replace GFP_ATOMIC with GFP_KERNEL in usb_probe()Jia-Ju Bai
usb_probe() is never called in atomic context. It calls usb_alloc_coherent() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Input: powermate - replace GFP_ATOMIC with GFP_KERNEL in ↵Jia-Ju Bai
powermate_alloc_buffers() powermate_alloc_buffers() is never called in atomic context. It calls usb_alloc_coherent() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27Input: keyspan_remote - replace GFP_ATOMIC with GFP_KERNEL in keyspan_probe()Jia-Ju Bai
keyspan_probe() is never called in atomic context. It calls usb_alloc_coherent() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - the main change is a fix for my brain-dead patch to PS/2 button reporting for some protocols that made it in 4.17 - there is a new driver for Spreadtum vibrator that I intended to send during merge window but ended up not sending the 2nd pull request. Given that this is a brand new driver we should not see regressions here - a fixup to Elantech PS/2 driver to avoid decoding errors on Thinkpad P52 - addition of few more ACPI IDs for Silead and Elan drivers - RMI4 is switched to using IRQ domain code instead of rolling its own implementation * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: psmouse - fix button reporting for basic protocols Input: xpad - fix GPD Win 2 controller name Input: elan_i2c_smbus - fix more potential stack buffer overflows Input: elan_i2c - add ELAN0618 (Lenovo v330 15IKB) ACPI ID Input: elantech - fix V4 report decoding for module with middle key Input: elantech - enable middle button of touchpads on ThinkPad P52 Input: do not assign new tracking ID when changing tool type Input: make input_report_slot_state() return boolean Input: synaptics-rmi4 - fix axis-swap behavior Input: synaptics-rmi4 - fix the error return code in rmi_probe_interrupts() Input: synaptics-rmi4 - convert irq distribution to irq_domain Input: silead - add MSSL0002 ACPI HID Input: goldfish_events - fix checkpatch warnings Input: add Spreadtrum vibrator driver
2018-06-15docs: Fix some broken referencesMauro Carvalho Chehab
As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-06-12Merge branch 'ib/4.17-xen-kbdfront-runtime-config' into nextDmitry Torokhov
Bring in xen-kbdfront changes.
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12Input: xen-kbdfront - allow better run-time configurationOleksandr Andrushchenko
It is now only possible to control if multi-touch virtual device is created or not (via the corresponding XenStore entries), but keyboard and pointer devices are always created. In some cases this is not desirable. For example, if virtual keyboard device is exposed to Android then the latter won't automatically show on-screen keyboard as it expects that a physical keyboard device can be used for typing. Utilize keyboard and pointer device XenStore feature fields to configure which virtual devices are created: - set "feature-disable-keyboard" to 1 if no keyboard device needs to be created - set "feature-disable-pointer" to 1 if no pointer device needs to be created Keep old behavior by default. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Suggested-by: Andrii Chepurnyi <andrii_chepurnyi@epam.com> Tested-by: Andrii Chepurnyi <andrii_chepurnyi@epam.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-12Input: xen-kbdfront - fix multi-touch XenStore node's locationsOleksandr Andrushchenko
kbdif protocol describes multi-touch device parameters as a part of frontend's XenBus configuration nodes while they belong to backend's configuration. Fix this by reading the parameters as defined by the protocol. Fixes: 49aac8204da5 ("Input: xen-kbdfront - add multi-touch support") Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver to ChipOne icn8505 based touchscreens - on certain systems with Elan touch controllers they will be switched away form PS/2 emulation and over to native SMbus mode - assorted driver fixups and improvements * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits) Input: elan_i2c - add ELAN0612 (Lenovo v330 14IKB) ACPI ID Input: goodix - add new ACPI id for GPD Win 2 touch screen Input: xpad - add GPD Win 2 Controller USB IDs Input: ti_am335x_tsc - prevent system suspend when TSC is in use Input: ti_am335x_tsc - ack pending IRQs at probe and before suspend Input: cros_ec_keyb - mark cros_ec_keyb driver as wake enabled device. Input: mk712 - update documentation web link Input: atmel_mxt_ts - fix reset-gpio for level based irqs Input: atmel_mxt_ts - require device properties present when probing Input: psmouse-smbus - allow to control psmouse_deactivate Input: elantech - detect new ICs and setup Host Notify for them Input: elantech - add support for SMBus devices Input: elantech - query the resolution in query_info Input: elantech - split device info into a separate structure Input: elan_i2c - add trackstick report Input: usbtouchscreen - add sysfs attribute for 3M MTouch firmware rev Input: ati_remote2 - fix typo 'can by' to 'can be' Input: replace hard coded string with __func__ in pr_err() Input: add support for ChipOne icn8505 based touchscreens Input: gamecon - avoid using __set_bit() for capabilities ...
2018-06-04Input: add Spreadtrum vibrator driverXiaotong Lu
This patch adds the Spreadtrum vibrator driver, which embedded in the Spreadtrum SC27xx series PMICs. Signed-off-by: Xiaotong Lu <xiaotong.lu@spreadtrum.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-24Merge tag 'v4.17-rc6' into nextDmitry Torokhov
Sync up with mainline to bring in Atmel controller changes for Caroline.
2018-05-16proc: introduce proc_create_single{,_data}Christoph Hellwig
Variants of proc_create{,_data} that directly take a seq_file show callback and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-15Input: ati_remote2 - fix typo 'can by' to 'can be'Wolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - new driver for PhoenixRC Flight Controller Adapter - new driver for RAVE SP Power button - fixes for autosuspend-related deadlocks in a few unput USB dirvers - support for 2nd wheel in ATech PS/2 mouse - fix for ALPS trackpoint detection on Thinkpad L570 and Latitude 7370 - bunch of cleanups in various in PS/2 protocols - other assorted changes and fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits) Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad Input: stmfts, s6sy761 - update my e-mail Input: stmfts - use async probe & suspend/resume to avoid 2s delay Input: ALPS - fix TrackStick detection on Thinkpad L570 and Latitude 7370 Input: xpad - add PDP device id 0x02a4 Input: alps - report pressure of v3 and v7 trackstick Input: pxrc - new driver for PhoenixRC Flight Controller Adapter Input: usbtouchscreen - do not rely on input_dev->users Input: usbtouchscreen - fix deadlock in autosuspend Input: pegasus_notetaker - do not rely on input_dev->users Input: pagasus_notetaker - fix deadlock in autosuspend Input: synaptics_usb - do not rely on input_dev->users Input: synaptics_usb - fix deadlock in autosuspend Input: gpio-keys - add support for wakeup event action Input: appletouch - use true and false for boolean values Input: silead - add Chuwi Hi8 support Input: analog - use get_cycles() on PPC Input: stmpe-keypad - remove VLA usage Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list Input: add RAVE SP Powerbutton driver ...
2018-03-26input: misc: remove blackfin rotary driverArnd Bergmann
The blackfin architecture is getting removed, so this one is obsolete as well. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Aaron Wu <aaron.wu@analog.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 03:54:10 +0000