summaryrefslogtreecommitdiff
path: root/drivers/input/keyboard
AgeCommit message (Collapse)Author
2010-12-06Input: add input driver for polled GPIO buttonsGabor Juhos
The existing gpio-keys driver can be usable only for GPIO lines with interrupt support. Several devices have buttons connected to a GPIO line which is not capable to generate interrupts. This patch adds a new input driver using the generic GPIO layer and the input-polldev to support such buttons. [Ben Gardiner <bengardiner@nanometrics.ca: fold code to use more of the original gpio_keys infrastructure; cleanups and other improvements.] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-04Input: atkbd - add 'terminal' parameter for IBM Terminal keyboardsBenjamin LaHaise
Many of the IBM Terminal keyboards from the 1980s and early 1990s communicate using a protocol similar, but not identical to the AT keyboard protocol. (Models known to be like this include 6110344, 6110668, 1390876, 1386887, and possibly others.) When the connector is rewired or adapter to an AT-DIN or PS/2 connector, they can be connected to a standard PC, with three caveats: a) They can only use scancode set 3; requests to use anything else are quietly ignored. b) The AT Command to request Make, Break and Repeat codes is not properly interpreted. c) The top function keys on a 122 key keyboard, and the arrow/edit keys in the middle of the board send non-standard scancodes. C) is easily taken care of in userspace, by use of setkeycodes B) can be taken care of by a userspace hack (that makes the kernel complain in dmesg) A) is fixable in theory, but on the keyboard i tested on (6110668), it seems to be detected unoverridably as Set 2, causing userspace oddities that make it harder to fix C). Enclosed is a small patch to the kernel that fixes A) and B) in the kernel, making it much easier to fix C) in userspace. It adds a single kernel command line parameter that overrides the detection that sets these boards as set 2, and instead of sending the Make-break-repeat command to the keyboard, it sends the make-break command, which is properly recognized by these keyboards. Software level key repeating seems to make up for the lack of hardware repeat codes perfectly. Without manually setting the command line parameter (tentatively named atkbd.terminal), this code has no effect, and the driver works exactly as before. See also: http://www.seasip.info/VintagePC/ibm_1390876.html http://www.seasip.info/VintagePC/ibm_6110344.html http://geekhack.org/showwiki.php?title=Island:7306 Signed-off-by: Erika Quinn <erikas.aubade@gmail.com> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-03Input: adp5588-keys - unify common header definesMichael Hennerich
Unify adp5588-gpio and adp5588-keys common header defines (as per Andrew Morton request). For consistency, move remaining defines and prefix accordingly. No functional changes. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-27input: jornada680_kbd: ctrl_in/outX to __raw_read/writeX conversion.Paul Mundt
The ctrl_xxx routines are deprecated, switch over to the __raw_xxx versions. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-25Merge branch 'davinci-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (50 commits) davinci: fix remaining board support after io_pgoffst removal davinci: mityomapl138: make file local data static arm/davinci: remove duplicated include davinci: Initial support for Omapl138-Hawkboard davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom davinci: add tnetv107x touchscreen platform device input: add driver for tnetv107x touchscreen controller davinci: add keypad config for tnetv107x evm board davinci: add tnetv107x keypad platform device input: add driver for tnetv107x on-chip keypad controller net: davinci_emac: cleanup unused cpdma code net: davinci_emac: switch to new cpdma layer net: davinci_emac: separate out cpdma code net: davinci_emac: cleanup unused mdio emac code omap: cleanup unused davinci mdio arch code davinci: cleanup mdio arch code and switch to phy_id net: davinci_emac: switch to new mdio omap: add mdio platform devices davinci: add mdio platform devices net: davinci_emac: separate out davinci mdio ... Fix up trivial conflict in drivers/input/keyboard/Kconfig (two entries added next to each other - one from the davinci merge, one from the input merge)
2010-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (75 commits) Input: wacom - specify Cinitq supported tools Input: ab8500-ponkey - fix IRQ freeing in error path Input: adp5588-keys - use more obvious i2c_device_id name string Input: ad7877 - switch to using threaded IRQ Input: ad7877 - use attribute group to control visibility of attributes Input: serio - add support for PS2Mult multiplexer protocol Input: wacom - properly enable runtime PM Input: ad7877 - filter events where pressure is beyond the maximum Input: ad7877 - implement EV_KEY:BTN_TOUCH reporting Input: ad7877 - implement specified chip select behavior Input: hp680_ts_input - use cancel_delayed_work_sync() Input: mousedev - correct lockdep annotation Input: ads7846 - switch to using threaded IRQ Input: serio - support multiple child devices per single parent Input: synaptics - simplify pass-through port handling Input: add ROHM BU21013 touch panel controller support Input: omap4-keypad - wake-up on events & long presses Input: omap4-keypad - fix interrupt line configuration Input: omap4-keypad - SYSCONFIG register configuration Input: omap4-keypad - use platform device helpers ...
2010-10-21Merge branch 'davinci-next' into davinci-for-linusKevin Hilman
Conflicts: arch/arm/mach-davinci/board-da830-evm.c arch/arm/mach-davinci/board-da850-evm.c
2010-10-18Input: adp5588-keys - use more obvious i2c_device_id name stringMichael Hennerich
KBUILD_MODNAME normalizes "-" to "_". This is non-obvious and results in the id name for ADP5588 being "adp5588_keys" while the other supported id is "adp5587-keys". So avoid this define and use an explicit string as the id name. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-13Input: omap4-keypad - wake-up on events & long pressesMike Turquette
Program keyboard controller to generate a wake-up request on events and on long key presses. It will not generate wake-up requests on timeouts since driver code does not handle them. This allows keyboard to wake-up OMAP from suspend. Signed-off-by: Mike Turquette <mturquette@ti.com> Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-13Input: omap4-keypad - fix interrupt line configurationAbraham Arce
Select correct interrupt line behaviour. Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-13Input: omap4-keypad - SYSCONFIG register configurationAbraham Arce
Remove SYSCONFIG register configuration, omap hwmod framework will use internal API to modify as required. Other minor updates: - Change a variable name from DEF to VAL, this represents a value - Break line width to 80 characters Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-13Input: omap4-keypad - use platform device helpersAbraham Arce
Get mem and irq resources using platform helpers - platform_get_base - platform_get_irq Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-13Input: add support for Nomadik SKE keypad controllerSundar Iyer
Add support for the keypad controller in the Scroll Key Encoder (SKE) module on the Nomadik family and the DB8500 SoC. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-13Input: twl4030_keypad - fix error handling pathDmitry Torokhov
We should not try to call free_irq() when request_irq() failed. Reported-by: G, Manjunath Kondaiah <manjugk@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-13Input: hil_kbd - add missing MODULE_DEVICE_TABLE()Dzianis Kahanovich
Signed-off-by: Dzianis Kahanovich <mahatma@eu.by> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-09ARM: pxa27x_keypad: added wakeup event handler for keypad interruptsMark F. Brown
mach-mmp needs to clear wake event in order to clear the keypad interrupt Signed-off-by: Mark F. Brown <mark.brown314@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09ARM: pxa168: added keypad supportMark F. Brown
Signed-off-by: Mark F. Brown <mark.brown314@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09ARM: pxa: moved pxa27x_keypad.h to platform pxa directoryMark F. Brown
mach-mmp utilizes pxa27x_keypad code so we need to move header to platform pxa directory. Signed-off-by: Mark F. Brown <mark.brown314@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-09-24input: add driver for tnetv107x on-chip keypad controllerCyril Chemparathy
This patch adds support for tnetv107x's on-chip keypad controller. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-08-31Input: add support for OMAP4 keyboard controllerAbraham Arce
OMAP4 keyboard controller includes: - built-in scanning algorithm - debouncing feature Driver implementation is based on matrix_keypad.c Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com> Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2010-08-25Input: pxa27x_keypad - remove input_free_device() in pxa27x_keypad_remove()Axel Lin
No need to call input_free_device() after input_unregister_device(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-21Input: hil_kbd - fix compile errorDmitry Torokhov
Fix another compile breakage stemming from 987a6c02 ("Input: switch to input_abs_*() access functions") Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-13Input: fix faulty XXinput_* callsDaniel Mack
They've been introduced by 987a6c02 ("Input: switch to input_abs_*() access functions") and they appear to be some kind of debug left-over. [Dmitry Torokhov: these are my fault - I added XX prefixes in places where I wanted to do additional review of the code but failed to actually do that in these particular instances.] Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12input: Add STMPE keypad driverRabin Vincent
Add an input driver for the keypad on STMPE I/O expanders. This driver uses the common support provided by the STMPE MFD driver. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - add USB-ID for PL-3601 Xbox 360 pad Input: cy8ctmg100_ts - signedness bug Input: elantech - report position also with 3 fingers Input: elantech - discard the first 2 positions on some firmwares Input: adxl34x - do not mark device as disabled on startup Input: gpio_keys - add hooks to enable/disable device Input: evdev - rearrange ioctl handling Input: dynamically allocate ABS information Input: switch to input_abs_*() access functions Input: add static inline accessors for ABS properties
2010-08-10Merge branch 'next' into for-linusDmitry Torokhov
2010-08-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) Input: adp5588-keypad - fix NULL dereference in adp5588_gpio_add() Input: cy8ctmg110 - capacitive touchscreen support Input: keyboard - also match braille-only keyboards Input: adp5588-keys - export unused GPIO pins Input: xpad - add product ID for Hori Fighting Stick EX2 Input: adxl34x - fix leak and use after free Input: samsung-keypad - Add samsung keypad driver Input: i8042 - reset keyboard controller wehen resuming from S2R Input: synaptics - set min/max for finger width Input: synaptics - only report width on hardware that supports it Input: evdev - signal that device is writable in evdev_poll() Input: mousedev - signal that device is writable in mousedev_poll() Input: change input handlers to use bool when possible Input: document the MT event slot protocol Input: introduce MT event slots Input: usbtouchscreen - implement reset_resume Input: usbtouchscreen - implement runtime power management Input: usbtouchscreen - implement basic suspend/resume Input: Add ATMEL QT602240 touchscreen driver Input: fix signedness warning in input_set_keycode() ...
2010-08-03Input: gpio_keys - add hooks to enable/disable deviceShubhrajyoti D
Allow platform code to specify callbcks that will be invoked when input device is opened or closed, allowing, for example, to enable the device. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-02Input: switch to input_abs_*() access functionsDaniel Mack
Change all call sites in drivers/input to not access the ABS axis information directly anymore. Make them use the access helpers instead. Also use input_set_abs_params() when possible. Did some code refactoring as I was on it. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-02Merge branch 'next' into for-linusDmitry Torokhov
2010-08-02Input: adp5588-keypad - fix NULL dereference in adp5588_gpio_add()Dmitry Torokhov
The kpad structure is assigned to i2c client via i2s_set_clientdata() at the end of adp5588_probe(), but in adp5588_gpio_add() we tried to access it (via dev_get_drvdata! which is not nice at all) causing an oops. Let's pass pointer to kpad directly into adp5588_gpio_add() and adp5588_gpio_remove() to avoid accessing driver data before it is set up. Also split out building of gpiomap into a separate function to clear the logic. Reported-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-26Input: adp5588-keys - export unused GPIO pinsXiaolong Chen
This patch allows exporting GPIO pins not used by the keypad itself to be accessible from elsewhere. Signed-off-by: Xiaolong Chen <xiao-long.chen@motorola.com> Signed-off-by: Yuanbo Ye <yuan-bo.ye@motorola.com> Signed-off-by: Tao Hu <taohu@motorola.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - relax capability ID checks on newer hardware Input: twl40300-keypad - fix handling of "all ground" rows Input: gamecon - reference correct pad in gc_psx_command() Input: gamecon - reference correct input device in NES mode Input: w90p910_keypad - change platfrom driver name to 'nuc900-kpi' Input: i8042 - add Gigabyte Spring Peak to dmi_noloop_table Input: qt2160 - rename kconfig symbol name
2010-07-21Input: samsung-keypad - Add samsung keypad driverJoonyoung Shim
This patch adds support for keypad driver running on Samsung cpus. This driver is tested on GONI and Aquila board using S5PC110 cpu. [ch.naveen@samsung.com: tested on SMDK6410, SMDKC100, and SMDKV210] Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Naveen Krishna Ch <ch.naveen@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-20Input: twl40300-keypad - fix handling of "all ground" rowsDmitry Torokhov
The Nokia RX51 board code (arch/arm/mach-omap2/board-rx51-peripherals.c) defines a key map for the matrix keypad keyboard. The hardware seems to use all of the 8 rows and 8 columns of the keypad, although not all possible locations are used. The TWL4030 supports keypads with at most 8 rows and 8 columns. Most keys are defined with a row and column number between 0 and 7, except KEY(0xff, 2, KEY_F9), KEY(0xff, 4, KEY_F10), KEY(0xff, 5, KEY_F11), which represent keycodes that should be emitted when entire row is connected to the ground. since the driver handles this case as if we had an extra column in the key matrix. Unfortunately we do not allocate enough space and end up owerwriting some random memory. Reported-and-tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-19Input: w90p910_keypad - change platfrom driver name to 'nuc900-kpi'Wan ZongShun
The name of platfrom device was changed and we need to make driver's name match in order for it to bind to the device. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-17Input: qt2160 - rename kconfig symbol nameChristoph Fritz
drivers/input/keyboard/Kconfig defines QT2160 while the corresponding Makefile expects CONFIG_KEYBOARD_QT2160 as all other keyboard drivers do. To keep this Makefile consistent rename the config-token from CONFIG_QT2160 to CONFIG_KEYBOARD_QT2160. The various defconfig files are left alone. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-07Revert "Input: fixup X86_MRST selects"Feng Tang
This reverts commit 0b28bac5aef7bd1ab213723df031e61db9ff151a. After adding x86_platform's detection for i8042 controller, we don't need the force dependency on !X86_MRST any more Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Feng Tang <feng.tang@intel.com> LKML-Reference: <1278342202-10973-5-git-send-email-feng.tang@intel.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-07-07Revert "Input: do not force selecting i8042 on Moorestown"Feng Tang
This reverts commit 685afae02557a178185a4be36f58332976e79f63. After adding x86_platform's detection for i8042 controller, we don't need the force dependency on !X86_MRST any more Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> LKML-Reference: <1278342202-10973-4-git-send-email-feng.tang@intel.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-07-04Input: mcs - Add MCS touchkey driverJoonyoung Shim
This adds support for MELPAS MCS5000/MSC5080 touch key controllers. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-30Merge commit 'v2.6.35-rc3' into nextDmitry Torokhov
2010-06-28Input: lm8323 - fix error handling in lm8323_probe()Dan Carpenter
We reuse the "i" variable later on so if we goto fail3 or fail4 then "i" will be set to the wrong thing and cause a crash. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-28Input: gpio-keys - add gpiolib debounce supportGrazvydas Ignotas
gpiolib now has debounce support added in .35, so let's make use of it. This allows to use hardware GPIO debouncing on some platforms like OMAP. In case gpiolib debounce setup fails for some GPIO, the driver will fall back to timer based debouncing, which is what it used before. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-24Input: adp5588-keys - support GPI events for ADP5588 devicesXiaolong CHEN
A column or row configured as a GPI can be programmed to be part of the key event table and therefore also capable of generating a key event interrupt. A key event interrupt caused by a GPI follows the same process flow as a key event interrupt caused by a key press. GPIs configured as part of the key event table allow single key switches and other GPI interrupts to be monitored. As part of the event table, GPIs are represented by the decimal value 97 (0x61 or 1100001) through the decimal value 114 (0x72 or 1110010). See table below for GPI event number assignments for rows and columns. GPI Event Number Assignments for Rows Row0 Row1 Row2 Row3 Row4 Row5 Row6 Row7 97 98 99 100 101 102 103 104 GPI Event Number Assignments for Cols Col0 Col1 Col2 Col3 Col4 Col5 Col6 Col7 Col8 Col9 105 106 107 108 109 110 111 112 113 114 Signed-off-by: Xiaolong Chen <xiao-long.chen@motorola.com> Signed-off-by: Yuanbo Ye <yuan-bo.ye@motorola.com> Signed-off-by: Tao Hu <taohu@motorola.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-22Input: fixup X86_MRST selectsRandy Dunlap
Some of the recent X86_MRST additions make some "select"s conditional on X86_MRST but missed some related kconfig symbols, causing: drivers/built-in.o: In function `ps2_end_command': (.text+0x257ab2): undefined reference to `i8042_check_port_owner' drivers/built-in.o: In function `ps2_end_command': (.text+0x257ae1): undefined reference to `i8042_unlock_chip' drivers/built-in.o: In function `ps2_begin_command': (.text+0x257b40): undefined reference to `i8042_check_port_owner' drivers/built-in.o: In function `ps2_begin_command': (.text+0x257b6f): undefined reference to `i8042_lock_chip' when SERIO_I8042=m, SERIO_LIBPS2=y, KEYBOARD_ATKBD=y. We need to make i8042 dependant upon !X86_MRST and allow deselecting atkbd on Moorestown even when !CONFIG_EMBEDDED. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-10Input: matrix_keypad - add support for clustered irqLuotao Fu
This one adds support of a combined irq source for the whole matrix keypad. This can be useful if all rows and columns of the keypad are e.g. connected to a GPIO expander, which only has one interrupt line for all events on every single GPIO. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-03i2c: Remove all i2c_set_clientdata(client, NULL) in driversWolfram Sang
I2C drivers can use the clientdata-pointer to point to private data. As I2C devices are not really unregistered, but merely detached from their driver, it used to be the drivers obligation to clear this pointer during remove() or a failed probe(). As a couple of drivers forgot to do this, it was agreed that it was cleaner if the i2c-core does this clearance when appropriate, as there is no guarantee for the lifetime of the clientdata-pointer after remove() anyhow. This feature was added to the core with commit e4a7b9b04de15f6b63da5ccdd373ffa3057a3681 to fix the faulty drivers. As there is no need anymore to clear the clientdata-pointer, remove all current occurrences in the drivers to simplify the code and prevent confusion. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-05-26m68k: amiga - Keyboard platform device conversionGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-05-19Input: do not force selecting i8042 on MoorestownJacob Pan
Moorestown does not have i8042 based keyboard controller, so give an option to deselect i8042 for non-pc mid. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-03Input: add keypad driver for keys interfaced to TCA6416Sriramakrishnan Govindarajan
This patch implements a simple Keypad driver that functions as an I2C client. It handles key press events for keys connected to TCA6416 I2C based IO expander. Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-26 22:04:05 +0000