summaryrefslogtreecommitdiff
path: root/drivers/input/keyboard
AgeCommit message (Collapse)Author
2014-04-24Input: atkbd - fix keyboard not working on some LG laptopsSheng-Liang Song
After issuing ATKBD_CMD_RESET_DIS, keyboard on some LG laptops stops working. The workaround is to stop issuing ATKBD_CMD_RESET_DIS commands. In order to keep changes in atkbd driver to the minimum we check DMI signature and only skip ATKBD_CMD_RESET_DIS if we are running on LG LW25-B7HV or P1-J273B. Cc: stable@vger.kernel.org Signed-off-by: Sheng-Liang Song <ssl@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-03Merge branch 'next' into for-linusDmitry Torokhov
First round of input updates for 3.15.
2014-03-30Input: pmic8xxx-keypad - migrate to DTStephen Boyd
The driver is only supported on DT enabled platforms. Convert the driver to DT so that it can probe properly. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-30Input: pmic8xxx-keypad - migrate to regmap APIsStephen Boyd
Use the regmap APIs for this driver instead of custom pm8xxx APIs. This breaks this driver's dependency on the pm8xxx APIs and allows us to easily port it to other bus protocols in the future. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-30Input: pmic8xxx-keypad - migrate to devm_* APIsStephen Boyd
Simplify the error paths and reduce the lines of code in this driver by using the devm_* APIs. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-30Input: pmic8xxx-keypad - fix build by removing gpio configurationStephen Boyd
The gpio configuration in this driver doesn't work because the gpio.h include doesn't exist. Remove the configuration as it isn't strictly necessary, allowing us to actually compile this driver. If it's needed in the future, it should be done via a pinctrl driver. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-30Input: add new driver for ARM CLPS711X keypadAlexander Shiyan
This patch adds a new driver for keypad for Cirrus Logic CLPS711X CPUs. Target CPU contain keyboard interface which can scan 8 column lines, so we can read row GPIOs to read status and determine asserted state. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-28Input: remove obsolete tnetv107x driversArnd Bergmann
The tnetv107x platform is getting removed, so the touchscreen and keypad drivers for this platform will no longer be needed either. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Kevin Hilman <khilman@linaro.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-01Merge tag 'v3.14-rc4' into nextDmitry Torokhov
Merge with Linux 3.14-rc4 to bring devm_request_any_context_irq().
2014-02-17Input: imx_keypad - Propagate the real error code on platform_get_irq() failureFabio Estevam
No need to return a 'fake' return value on platform_get_irq() failure. Just return the error code itself instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-02-15Input: adp5588-keys - get value from data out when dir is outJean-Francois Dagenais
As discussed here: http://ez.analog.com/message/35852, the 5587 revC and 5588 revB spec sheets contain a mistake in the GPIO_DAT_STATx register description. According to R.Shnell at ADI, as well as my own observations, it should read: "GPIO data status (shows GPIO state when read for inputs)". This commit changes the get value function accordingly. Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-01-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "Just a swath of driver fixes and cleanups, no new drivers this time (although ALPS now supports one of the newer protocols, more to come)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) Input: wacom - add support for DTU-1031 Input: wacom - fix wacom->shared guards for dual input devices Input: edt_ft5x06 - use devm_* functions where appropriate Input: hyperv-keyboard - pass through 0xE1 prefix Input: logips2pp - fix spelling s/reciver/receiver/ Input: delete non-required instances of include <linux/init.h> Input: twl4030-keypad - convert to using managed resources Input: twl6040-vibra - remove unneeded check for CONFIG_OF Input: twl4030-keypad - add device tree support Input: twl6040-vibra - add missing of_node_put Input: twl4030-vibra - add missing of_node_put Input: i8042 - cleanup SERIO_I8042 dependencies Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on x86 Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on unicore32 Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on sparc Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO for SH_CAYMAN Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on powerpc Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on mips Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on IA64 Input: i8042 - select ARCH_MIGHT_HAVE_PC_SERIO on ARM/Footbridge ...
2014-01-06Input: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-01-06Input: twl4030-keypad - convert to using managed resourcesDmitry Torokhov
Reviewed-by: Jingoo Han <jg1.han@samsung.com> Tested-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-01-04Input: twl4030-keypad - add device tree supportSebastian Reichel
Add device tree support for twl4030 keypad driver. Tested on Nokia N900. Signed-off-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-31Input: cros_ec_keyb - fix problems with backslashDoug Anderson
The driver can't deal with two entries its keymap having the same keycode. When this happens it will get confused about whether the key is down or up and will cause some screwy behavior. We need to have two entries for KEY_BACKSLASH to handle US and UK keyboards. Specifically: * On the US keyboard the backslash key (above enter) is r3 c11 and is supposed to be reported as BACKSLASH. * On the UK keyboard the # key (left of enter) is r4 c10 and is supposed to be reported as BACKSLASH. * On the UK keyboard the \ key (left of Z) is r2 c7 and is supposed to be reported as KEY_102ND. Note that both keyboards (US and UK) have only one physical backslash key so the constraint that each physical key should have its own keycode still stands. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-26Merge tag 'tegra-for-3.14-dmas-resets-rework' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/cleanup From Stephen Warren: ARM: tegra: implement common DMA and resets DT bindings This series converts the Tegra DTs and drivers to use the common/ standard DMA and reset bindings, rather than custom bindings. It also adds complete documentation for the Tegra clock bindings without actually changing any binding definitions. This conversion relies on a few sets of patches in branches from outside the Tegra tree: 1) A patch to add an DMA channel request API which allows deferred probe to be implemented. 2) A patch to implement a common part of the of_xlate function for DMA controllers. 3) Some ASoC patches (which in turn rely on (1) above), which support deferred probe during DMA channel allocation. 4) The Tegra clock driver changes for 3.14. Consequently, this branch is based on a merge of all of those external branches. In turn, this branch is or will be pulled into a few places that either rely on features introduced here, or would otherwise conflict with the patches: a) Tegra's own for-3.14/powergate and for-4.14/dt branches, to avoid conflicts. b) The DRM tree, which introduces new code that relies on the reset controller framework introduced in this branch, and to avoid conflicts. * tag 'tegra-for-3.14-dmas-resets-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (30 commits) spi: tegra: checking for ERR_PTR instead of NULL ASoC: tegra: update module reset list for Tegra124 clk: tegra: remove bogus PCIE_XCLK clk: tegra: remove legacy reset APIs ARM: tegra: remove legacy DMA entries from DT ARM: tegra: remove legacy clock entries from DT USB: EHCI: tegra: use reset framework Input: tegra-kbc - use reset framework serial: tegra: convert to standard DMA DT bindings serial: tegra: use reset framework spi: tegra: convert to standard DMA DT bindings spi: tegra: use reset framework staging: nvec: use reset framework i2c: tegra: use reset framework ASoC: tegra: convert to standard DMA DT bindings ASoC: tegra: allocate AHUB FIFO during probe() not startup() ASoC: tegra: call pm_runtime APIs around register accesses ASoC: tegra: use reset framework dma: tegra: register as an OF DMA controller dma: tegra: use reset framework ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-16Merge tag 'v3.13-rc4' into nextDmitry Torokhov
Synchronize with mainline to bring in the new keycode definitions and new hwmon API.
2013-12-11Input: tegra-kbc - use reset frameworkStephen Warren
Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-07Input: samsung-keypad - favor platform data if presentDmitry Torokhov
We should be able to override firmware-provided parameters with in-kernel data, if needed. To that effect favor platform data, if present, over devicetree data. Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-06Input: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-05Input: sh_keysc - restrict non-COMPILE_TEST compilationLaurent Pinchart
Hardware supported by the driver is only found on SUPERH or ARCH_SHMOBILE platforms. Restrict non-COMPILE_TEST compilation to them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-25Input: keyboard - "keycode & KEY_MAX" changes some keycode valuesAndrew Liu
For exmaple, keycode: KEY_OK(0x160) is changed by "and" operation with KEY_MAX(0x2ff) to KEY_KPENTER(96). Signed-off-by: Andrew Liu <andrew.liu200917@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-14Merge branch 'next' into for-linusDmitry Torokhov
Merge first round of changes for 3.13 merge window.
2013-11-11Input: tnetv107x-keypad - make irqs signed for error handlingDan Carpenter
There is a bug in keypad_probe() where we do: kp->irq_press = platform_get_irq_byname(pdev, "press"); kp->irq_release = platform_get_irq_byname(pdev, "release"); if (kp->irq_press < 0 || kp->irq_release < 0) { The problem is that these irq variables are unsigned so the error handling doesn't work. I've changed them to signed values. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-31Input: sh_keysc - enable the driver on all ARM platformsLaurent Pinchart
Renesas ARM platforms are transitioning from single-platform to multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the driver available on all ARM platforms to enable it on both ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI, and increase build testing coverage with COMPILE_TEST. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-31Input: allow deselecting serio drivers even without CONFIG_EXPERTTom Gundersen
There is plenty of consumer hardware (e.g., mac books) that does not use AT keyboards or PS/2 mice. It therefore makes sense for distro kernels to build the related drivers as modules to avoid loading them on hardware that does not need them. As such, these options should no longer be protected by EXPERT. Moreover, building these drivers as modules gets rid of the following ugly error during boot: [ 2.337745] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 3.439537] i8042: No controller found Signed-off-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-15Input: nspire-keypad - add missing clk_disable_unprepare() on error pathWei Yongjun
Add the missing clk_disable_unprepare() before return from nspire_keypad_open() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-08Merge tag 'v3.12-rc4' into nextDmitry Torokhov
Merge with mainline to bring in changes to input subsystem that were committed through other trees.
2013-10-06Input: pxa27x_keypad - include linux/of.h headerSachin Kamat
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-06Input: gpio_keys_polled - include linux/of.h headerSachin Kamat
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-06Input: gpio_keys - include linux/of.h headerSachin Kamat
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-06Input: tegra-kbc - remove redundant of_match_ptrSachin Kamat
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-06Input: nspire-keypad - remove redundant of_match_ptrSachin Kamat
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-06Input: lpc32xx-keys - remove redundant of_match_ptrSachin Kamat
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-09-18Input: pxa27x_keypad - fix NULL pointer dereferenceMike Dunn
A NULL pointer dereference exception occurs in the driver probe function when device tree is used. The pdata pointer will be NULL in this case, but the code dereferences it in all cases. When device tree is used, a platform data structure is allocated and initialized, and in all cases this pointer is copied to the driver's private data, so the variable being tested should be accessed through the driver's private data structure. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-09-18Merge tag 'v3.11' into nextDmitry Torokhov
Merge with mainline to bring in sync changes to cyttsp4 driver.
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A new driver for slidebar on Ideapad laptops and a bunch of assorted driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (32 commits) Input: add SYN_MAX and SYN_CNT constants Input: max11801_ts - convert to devm Input: egalax-ts - fix typo and improve text Input: MAINTAINERS - change maintainer for cyttsp driver Input: cyttsp4 - kill 'defined but not used' compiler warnings Input: add driver for slidebar on Lenovo IdeaPad laptops Input: omap-keypad - set up irq type from DT Input: omap-keypad - enable wakeup capability for keypad. Input: omap-keypad - clear interrupts on open Input: omap-keypad - convert to threaded IRQ Input: omap-keypad - use bitfiled instead of hardcoded values Input: cyttsp4 - remove useless NULL test from cyttsp4_watchdog_timer() Input: wacom - fix error return code in wacom_probe() Input: as5011 - fix error return code in as5011_probe() Input: keyboard, serio - simplify use of devm_ioremap_resource Input: tegra-kbc - simplify use of devm_ioremap_resource Input: htcpen - fix incorrect placement of __initdata Input: qt1070 - add power management ops Input: wistron_btns - add MODULE_DEVICE_TABLE Input: wistron_btns - mark the Medion MD96500 keymap as tested ...
2013-09-06Merge branch 'next' into for-linusDmitry Torokhov
Merge first round of changes for 3.12 merge window.
2013-08-26Input: omap-keypad - set up irq type from DTIllia Smyrnov
OMAP4 is DT only, so read the keypad IRQ type from DT instead hard-coding it in the driver. Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-26Input: omap-keypad - enable wakeup capability for keypad.Illia Smyrnov
Enable/disable IRQ wake in suspend/resume handlers to make the keypad wakeup capable. Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-26Input: omap-keypad - clear interrupts on openIllia Smyrnov
According to TRM, the recommended way for keyboard controller initialization is clear the interrupt-status register, then set up certain keyboard events for generating an interrupt request and set up expected source of wake-up event that generates a wake-up request. Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-26Input: omap-keypad - convert to threaded IRQIllia Smyrnov
Convert to use threaded IRQ. Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-26Input: omap-keypad - use bitfiled instead of hardcoded valuesIllia Smyrnov
Use bitfiled instead of hardcoded values to set KBD_CTRL, use BIT macro, remove unused defines. Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-15Input: keyboard, serio - simplify use of devm_ioremap_resourceJulia Lawall
Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. Move the call to platform_get_resource adjacent to the call to devm_ioremap_resource to make the connection between them more clear. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-15Input: tegra-kbc - simplify use of devm_ioremap_resourceJulia Lawall
Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. Move the call to platform_get_resource adjacent to the call to devm_ioremap_resource to make the connection between them more clear. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-13Input: qt1070 - add power management opsBo Shen
Add power management ops for qt1070, it may be a wakeup source. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-12Input: max7359 - add CONFIG_PM_SLEEP to suspend/resumeJingoo Han
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the build warnings when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SET_SYSTEM_SLEEP_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/input/keyboard/max7359_keypad.c:275:12: warning: 'max7359_suspend' defined but not used [-Wunused-function] drivers/input/keyboard/max7359_keypad.c:287:12: warning: 'max7359_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull second round of input updates from Dmitry Torokhov: "An update to Elantech driver to support hardware v7, fix to the new cyttsp4 driver to use proper addressing, ads7846 device tree support and nspire-keypad got a small cleanup." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: nspire-keypad - replace magic offset with define Input: elantech - fix for newer hardware versions (v7) Input: cyttsp4 - use 16bit address for I2C/SPI communication Input: ads7846 - add device tree bindings Input: ads7846 - make sure we do not change platform data
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 10:53:35 +0000