summaryrefslogtreecommitdiff
path: root/drivers/input/joystick
AgeCommit message (Collapse)Author
2016-08-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: "Two new drivers for touchscreen controllers: - Silead touchscreen controllers - SiS 9200 family touchscreen controllers and a few driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: silead - remove some dead code Input: sis-i2c - select CONFIG_CRC_ITU_T Input: add driver for SiS 9200 family I2C touchscreen controllers Input: ili210x - fix permissions on "calibrate" attribute Input: elan_i2c - properly wake up touchpad on ASUS laptops Input: add driver for Silead touchscreens Input: elantech - fix debug dump of the current packet Input: rotary_encoder - support binary encoding of states Input: xpad - power off wireless 360 controllers on suspend Input: i8042 - break load dependency between atkbd/psmouse and i8042 Input: synaptics-rmi4 - do not check for NULL when calling of_node_put() Input: cros_ec_keyb - cleanup use of dev
2016-07-27Input: xpad - power off wireless 360 controllers on suspendCameron Gutman
When the USB wireless adapter is suspended, the controllers lose their connection. This causes them to start flashing their LED rings and searching for the wireless adapter again, wasting the controller's battery power. Instead, we will tell the controllers to power down when we suspend. This mirrors the behavior of the controllers when connected to the console itself and how the official Xbox One wireless adapter behaves on Windows. Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A few last-minute updates for the input subsystem" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ts4800-ts - add missing of_node_put after calling of_parse_phandle Input: synaptics-rmi4 - use of_get_child_by_name() to fix refcount Revert "Input: wacom_w8001 - drop use of ABS_MT_TOOL_TYPE" Input: xpad - validate USB endpoint count during probe Input: add SW_PEN_INSERTED define
2016-06-29Input: xpad - validate USB endpoint count during probeCameron Gutman
This prevents a malicious USB device from causing an oops. Signed-off-by: Cameron Gutman <aicommander@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: vmmouse - remove port reservation Input: elantech - add more IC body types to the list Input: wacom_w8001 - ignore invalid pen data packets Input: wacom_w8001 - w8001_MAX_LENGTH should be 13 Input: xpad - fix oops when attaching an unknown Xbox One gamepad MAINTAINERS: add Pali Rohár as reviewer of ALPS PS/2 touchpad driver Input: add HDMI CEC specific keycodes Input: add BUS_CEC type Input: xpad - fix rumble on Xbox One controllers with 2015 firmware
2016-06-23Input: xpad - fix oops when attaching an unknown Xbox One gamepadCameron Gutman
Xbox One controllers have multiple interfaces which all have the same class, subclass, and protocol. One of the these interfaces has only a single endpoint. When Xpad attempts to bind to this interface, it causes an oops when trying initialize the output URB by trying to access the second endpoint's descriptor. This situation was avoided for known Xbox One devices by checking the XTYPE constant associated with the VID and PID tuple. However, this breaks when new or previously unknown Xbox One controllers are attached to the system. This change addresses the problem by deriving the XTYPE for Xbox One controllers based on the interface protocol before checking the interface number. Fixes: 1a48ff81b391 ("Input: xpad - add support for Xbox One controllers") Signed-off-by: Cameron Gutman <aicommander@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-01Input: xpad - fix rumble on Xbox One controllers with 2015 firmwareCameron Gutman
Xbox One controllers that shipped with or were upgraded to the 2015 firmware discard the current rumble packets we send. This patch changes the Xbox One rumble packet to a form that both the newer and older firmware will accept. It is based on changes made to support newer Xbox One controllers in the SteamOS brewmaster-4.1 kernel branch. Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input subsystem updates from Dmitry Torokhov: "Just a few more driver fixes; new drivers will be coming in the next merge window" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: pwm-beeper - fix - scheduling while atomic Input: xpad - xbox one elite controller support Input: xpad - add more third-party controllers Input: xpad - prevent spurious input from wired Xbox 360 controllers Input: xpad - move pending clear to the correct location Input: uinput - handle compat ioctl for UI_SET_PHYS
2016-05-27Input: xpad - xbox one elite controller supportPavel Rojtberg
added the according id and incresed XPAD_PKT_LEN to 64 as the elite controller sends at least 33 byte messages [1]. Verified to be working by [2]. [1]: https://franticrain.github.io/sniffs/XboxOneSniff.html [2]: https://github.com/paroj/xpad/issues/23 Signed-off-by: Pierre-Loup A. Griffais <eduke32@plagman.net> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-27Input: xpad - add more third-party controllersPavel Rojtberg
Signed-off-by: Pierre-Loup A. Griffais <eduke32@plagman.net> Signed-off-by: Thomas Debesse <dev@illwieckz.net> Signed-off-by: aronschatz <aronschatz@aselabs.com> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-27Input: xpad - prevent spurious input from wired Xbox 360 controllersCameron Gutman
After initially connecting a wired Xbox 360 controller or sending it a command to change LEDs, a status/response packet is interpreted as controller input. This causes the state of buttons represented in byte 2 of the controller data packet to be incorrect until the next valid input packet. Wireless Xbox 360 controllers are not affected. Writing a new value to the LED device while holding the Start button and running jstest is sufficient to reproduce this bug. An event will come through with the Start button released. Xboxdrv also won't attempt to read controller input from a packet where byte 0 is non-zero. It also checks that byte 1 is 0x14, but that value differs between wired and wireless controllers and this code is shared by both. I think just checking byte 0 is enough to eliminate unwanted packets. The following are some examples of 3-byte status packets I saw: 01 03 02 02 03 00 03 03 03 08 03 00 Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-27Input: xpad - move pending clear to the correct locationPavel Rojtberg
otherwise we lose ff commands: https://github.com/paroj/xpad/issues/27 Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-05Merge tag 'v4.6-rc6' into x86/asm, to refresh the treeIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-13x86/cpufeature: Replace cpu_has_tsc with boot_cpu_has() usageBorislav Petkov
Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Sailer <t.sailer@alumni.ethz.ch> Link: http://lkml.kernel.org/r/1459801503-15600-7-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-05Input: xpad - add Mad Catz FightStick TE 2 VID/PIDSilvan Jegen
This adds the VID/PID combination for the Xbox One version of the Mad Catz FightStick TE 2. The functionality that this provides is about on par with what the Windows drivers for the stick manage to deliver. What works: - Digital stick - 6 main buttons - Xbox button - The two buttons on the back - The locking buttons (preventing accidental Xbox button press) What doesn't work: - Two of the main buttons (don't work on Windows either) - The "Haptic" button setting does not have an effect (not sure if it works on Windows) I added the MAP_TRIGGERS_TO_BUTTONS option but in my (limited) testing there was no practical difference with or without. The FightStick does not have triggers though so adding it makes sense. Signed-off-by: Silvan Jegen <s.jegen@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: xpad - remove unused functionArnd Bergmann
There are two definitions of xpad_identify_controller(), one is used when CONFIG_JOYSTICK_XPAD_LEDS is set, but the other one is empty and never used, and we get a gcc warning about it: drivers/input/joystick/xpad.c:1210:13: warning: 'xpad_identify_controller' defined but not used [-Wunused-function] This removes the second definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: cae705baa40b ("Input: xpad - re-send LED command on present event") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-21Merge branch 'next' into for-linusDmitry Torokhov
Prepare second round of input updates for 4.5 merge window.
2016-01-12Input: xpad - correct xbox one pad device namePavel Rojtberg
Apparently the Covert Forces ID is not Covert Forces pad exclusive, but rather denotes a new firmware version that can be found on all new controllers and can be also updated on old hardware using Windows 10. see: https://github.com/paroj/xpad/issues/19 Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-11Merge branch 'next' into for-linusDmitry Torokhov
Prepare first round of input updates for 4.5 merge window.
2016-01-04Input: xpad - use LED API when identifying wireless controllersDmitry Torokhov
When lighting up the segment identifying wireless controller, Instead of sending command directly to the controller, let's do it via LED API (usinf led_set_brightness) so that LED object state is in sync with controller state and we'll light up the correct segment on resume as well. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-04Input: xpad - workaround dead irq_out after suspend/ resumePavel Rojtberg
The irq_out urb is dead after suspend/ resume on my x360 wr pad. (also reproduced by Zachary Lund [0]) Work around this by implementing suspend, resume, and reset_resume callbacks and properly shutting down URBs on suspend and restarting them on resume. [0]: https://github.com/paroj/xpad/issues/6 Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-04Input: xpad - update Xbox One Force Feedback SupportPierre-Loup A. Griffais
There's apparently a serial number woven into both input and output packets; neglecting to specify a valid serial number causes the controller to ignore the rumble packets. The scale of the rumble was also apparently halved in the packets. The initialization packet had to be changed to allow force feedback to work. see https://github.com/paroj/xpad/issues/7 for details. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-04Input: xpad - correctly handle concurrent LED and FF requestsPavel Rojtberg
Track the status of the irq_out URB to prevent submission iof new requests while current one is active. Failure to do so results in the "URB submitted while active" warning/stack trace. Store pending brightness and FF effect in the driver structure and replace it with the latest requests until the device is ready to process next request. Alternate serving LED vs FF requests to make sure one does not starve another. See [1] for discussion. Inspired by patch of Sarah Bessmer [2]. [1]: http://www.spinics.net/lists/linux-input/msg40708.html [2]: http://www.spinics.net/lists/linux-input/msg31450.html Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-16Input: xpad - handle "present" and "gone" correctlyPierre-Loup A. Griffais
Handle the "a new device is present" message properly by dynamically creating the input device at this point in time. This means we now do not "preallocate" all 4 devices when a single wireless base station is seen. This requires a workqueue as we are in interrupt context when we learn about this. Also properly disconnect any devices that we are told are removed. Signed-off-by: "Pierre-Loup A. Griffais" <pgriffais@valvesoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-16Input: xpad - remove spurious events of wireless xpad 360 controllerClement Calmels
When powering up a wireless xbox 360 controller, some wrong joystick events are generated. It is annoying because, for example, it makes unwanted moves in Steam big picture mode's menu. When my controller is powering up, this packet is received by the driver: 00000000: 00 0f 00 f0 00 cc ff cf 8b e0 86 6a 68 f0 00 20 ...........jh.. 00000010: 13 e3 20 1d 30 03 40 01 50 01 ff ff .. .0.@.P... According to xboxdrv userspace driver source code, this packet is only dumping a serial id and should not be interpreted as joystick events. This issue can be easily seen with jstest: $ jstest --event /dev/input/js0 This patch only adds a way to filter out this "serial" packet and as a result it removes the spurous events. Signed-off-by: Clement Calmels <clement.calmels@free.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-11-17Input: walkera0701 - clear unused function pointersSudip Mukherjee
walkera0701_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: 221bcb24c653 ("Input: walkera0701 - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-11-17Input: turbografx - clear unused function pointersSudip Mukherjee
tgfx_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: 4de27a638a99 ("Input: turbografx - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-11-17Input: gamecon - clear unused function pointersSudip Mukherjee
gc_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: a517e87c3dfc ("Input: gamecon - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-11-17Input: db9 - clear unused function pointersSudip Mukherjee
db9_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: 2260c419b52b ("Input: db9 - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-11-09remove abs64()Andrew Morton
Switch everything to the new and more capable implementation of abs(). Mainly to give the new abs() a bit of a workout. Cc: Michal Nazarewicz <mina86@mina86.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-19Input: xpad - fix clash of presence handling with LED settingPavel Rojtberg
Do not call xpad_identify_controller at init with wireless devices: it conflicts with the already sent presence packet and will be called by xpad360w_process_packet as needed anyway. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-10Input: xpad - query wireless controller state at initPavel Rojtberg
When we initialize the driver/device, we really don't know how many controllers are connected. So send a "query presence" command to the base-station. (Command discovered by Zachary Lund) Presence packet taken from: https://github.com/computerquip/xpad5 Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-10Input: xpad - move the input device creation to a new functionPierre-Loup A. Griffais
To allow us to later create / destroy the input device from the urb callback, we need to initialize/ deinitialize the input device from a separate function. So pull that logic out now to make later patches more "obvious" as to what they do. Signed-off-by: "Pierre-Loup A. Griffais" <pgriffais@valvesoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-10Input: xpad - x360w: report dpad as buttons and axesPavel Rojtberg
as discussed here[0], x360w is the only pad that maps dpad_to_button. This is bad for downstream developers as they have to differ between x360 and x360w which is not intuitive. This patch implements the suggested solution of exposing the dpad both as axes and as buttons. This retains backward compatibility with software already dealing with the difference while makes new software work as expected across x360/ x360w pads. [0] http://www.spinics.net/lists/linux-input/msg34421.html Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-10Input: xpad - factor out URB submission in xpad_play_effectPavel Rojtberg
Move submission logic to a single point at the end of the function. This makes it easy to add locking/ queuing code later on. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-10Input: xpad - remove needless bulk out URB used for LED setupPavel Rojtberg
This code was probably wrong ever since and is redundant with xpad_send_led_command. Both try to send a similar command to the xbox360 controller. However xpad_send_led_command correctly uses the pad_nr instead of bInterfaceNumber to select the led and re-uses the irq_out URB instead of creating a new one. Note that this change only affects the two supported wireless controllers. Tested using the xbox360 wireless controller (PC). Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-10Input: xpad - use ida() for finding the pad_nrPavel Rojtberg
The pad_nr corresponds to the lit up LED on the controller. Therefore there should be no gaps when enumerating. Currently a LED is only re-assigned after a controller is re-connected 4 times. This patch uses ida to track connected pads - this way we can re-assign freed up pad number immediately. Consider the following case: 1. pad A is connected and gets pad_nr = 0 2. pad B is connected and gets pad_nr = 1 3. pad A is disconnected 4. pad A is connected again using ida_simple_get() controller A now correctly gets pad_nr = 0 again. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-10Input: xpad - clarify LED enumerationPavel Rojtberg
Rename led_no -> pad_nr: the number stored there is not the LED number - it gets translated later on to a LED number in xpad_identify_controller; Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-10Input: xpad - fix Razer Atrox Arcade Stick button mappingDario Scarpa
The "Razer Atrox Arcade Stick" features 10 buttons, and two of them (LT/RT) don't work properly. Change its definition in xpad_device[] (mapping field) to fix. Signed-off-by: Dario Scarpa <dario.scarpa@duskzone.it> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-10Input: xpad - add Covert Forces edition of the Xbox One controllerErik Lundgren
It is identical to the Xbox One controller but has a different product ID. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-05Merge tag 'v4.3-rc4' into nextDmitry Torokhov
Merge with mainline to sync up with changes to parkbd driver.
2015-10-05Input: turbografx - store object in correct indexSudip Mukherjee
The variable i is used to check the port to attach to and we are supposed to save the reference of struct tgfx in the location given by tgfx_base[i]. But after finding out the index, i is getting modified again so we saved in a wrong index. Fixes: 4de27a638a99 ("Input: turbografx - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-05Input: gamecon - store object at correct indexSudip Mukherjee
The variable i is used to check the port to attach to and we are supposed to save the reference of struct gc in the location given by gc_base[i]. But after finding out the index, i is getting modified again so we saved in a wrong index. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: a517e87c3dfc ("Input: gamecon - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-05Input: db9 - store object at correct indexSudip Mukherjee
The variable i is used to check the port to attach to and we are supposed to save the reference of struct db9 in the location given by db9_base[i]. But after finding out the index, i is getting modified again so we saved in a wrong index. While at it mark db9_base[i] as NULL after it is freed. Fixes: 2260c419b52b ("Input: db9 - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "Fixes for two recent regressions (in Synaptics PS/2 and uinput drivers) and some more driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics - fix handling of disabling gesture mode" Input: psmouse - fix data race in __ps2_command Input: elan_i2c - add all valid ic type for i2c/smbus Input: zhenhua - ensure we have BITREVERSE Input: omap4-keypad - fix memory leak Input: serio - fix blocking of parport Input: uinput - fix crash when using ABS events Input: elan_i2c - expand maximum product_id form 0xFF to 0xFFFF Input: elan_i2c - add ic type 0x03 Input: elan_i2c - don't require known iap version Input: imx6ul_tsc - fix controller name Input: imx6ul_tsc - use the preferred method for kzalloc() Input: imx6ul_tsc - check for negative return value Input: imx6ul_tsc - propagate the errors Input: walkera0701 - fix abs() calculations on 64 bit values Input: mms114 - remove unneded semicolons Input: pm8941-pwrkey - remove unneded semicolon Input: fix typo in MT documentation Input: cyapa - fix address of Gen3 devices in device tree documentation
2015-10-01drivers/input/joystick/Kconfig: zhenhua.c needs BITREVERSEAndrew Morton
It uses bitrev8(), so it must ensure that lib/bitrev.o gets included in vmlinux. Cc: Fengguang Wu <fengguang.wu@gmail.com> Cc: yalin wang <yalin.wang2010@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-29Merge tag 'v4.3-rc3' into nextDmitry Torokhov
Merge with Linux 4.3-rc3 to bring in MFD DA9062 changes to merge DA9062 OnKey driver.
2015-09-29Input: walkera0701 - use parallel port device modelSudip Mukherjee
Modify walkera0701 driver to use the new Parallel Port device model. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-29Input: turbografx - use parallel port device modelSudip Mukherjee
Modify turbografx driver to use the new Parallel Port device model. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-29Input: gamecon - use parallel port device modelSudip Mukherjee
Modify gamecon driver to use the new Parallel Port device model. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 18:27:53 +0000