summaryrefslogtreecommitdiff
path: root/drivers/input/joystick
AgeCommit message (Collapse)Author
2020-12-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A fix for 'RETRIGEN' handling in Atmel touch controllers that was causing lost interrupts on systems using edge-triggered interrupts, a quirk for i8042 driver, and a couple more fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: atmel_mxt_ts - fix lost interrupts Input: xpad - support Ardwiino Controllers Input: i8042 - add ByteSpeed touchpad to noloop table Input: i8042 - fix error return code in i8042_setup_aux() Input: soc_button_array - add missing include
2020-11-30Input: xpad - support Ardwiino ControllersSanjay Govind
This commit adds support for Ardwiino Controllers Signed-off-by: Sanjay Govind <sanjay.govind9@gmail.com> Link: https://lore.kernel.org/r/20201201071922.131666-1-sanjay.govind9@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for ADC driven joysticks - a new Zintix touchscreen driver - enhancements to Intel SoC button array driver - support for F3A "function" in Synaptics RMI4 driver - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits) Input: Add MAINTAINERS entry for SiS i2c touch input driver Input: evdev - per-client waitgroups Input: synaptics - enable InterTouch for ThinkPad T14 Gen 1 Input: synaptics - enable InterTouch for ThinkPad P1/X1E gen 2 Input: synaptics-rmi4 - support bootloader v8 in f34v7 Input: synaptics-rmi4 - add support for F3A Input: synaptics-rmi4 - rename f30_data to gpio_data Input: add zinitix touchscreen driver dt-bindings: input/touchscreen: add bindings for zinitix Input: joystick - add ADC attached joystick driver. dt-bindings: input: Add docs for ADC driven joystick Input: sun4i-ps2 - fix handling of platform_get_irq() error Input: twl4030_keypad - fix handling of platform_get_irq() error Input: omap4-keypad - fix handling of platform_get_irq() error Input: ep93xx_keypad - fix handling of platform_get_irq() error Input: stmfts - fix a & vs && typo Input: imx6ul_tsc - unify open/close and PM paths Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume() Input: elants_i2c - fix typo for an attribute to show calibration count Input: elants_i2c - report resolution of ABS_MT_TOUCH_MAJOR by FW information. ...
2020-09-28Input: joystick - add ADC attached joystick driver.Artur Rojek
Add a driver for joystick devices connected to ADC controllers supporting the Industrial I/O subsystem. Signed-off-by: Artur Rojek <contact@artur-rojek.eu> Tested-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20200927123302.31062-2-contact@artur-rojek.eu Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - an update to Elan touchpad controller driver supporting newer ICs with enhanced precision reports and a new firmware update process - an update to EXC3000 touch controller supporting additional parts - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits) Input: exc3000 - add support to query model and fw_version Input: exc3000 - add reset gpio support Input: exc3000 - add EXC80H60 and EXC80H84 support dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema Input: sentelic - fix error return when fsp_reg_write fails Input: alps - remove redundant assignment to variable ret Input: ims-pcu - return error code rather than -ENOMEM Input: elan_i2c - add ic type 0x15 Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Input: uinput - fix typo in function name documentation Input: ati_remote2 - add missing newlines when printing module parameters Input: psmouse - add a newline when printing 'proto' by sysfs Input: synaptics-rmi4 - drop a duplicated word Input: elan_i2c - add support for high resolution reports Input: elan_i2c - do not constantly re-query pattern ID Input: elan_i2c - add firmware update info for ICs 0x11, 0x13, 0x14 Input: elan_i2c - handle firmware updated on newer ICs Input: elan_i2c - add support for different firmware page sizes Input: elan_i2c - fix detecting IAP version on older controllers Input: elan_i2c - handle devices with patterns above 1 ...
2020-07-21Merge branch 'for-linus' into nextDmitry Torokhov
Sync up with 'for-linus' branch to resolve conflict in Elan touchpad driver.
2020-07-07Input: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200707180857.GA30600@embeddedor Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-09Input: adi - work around module name confictArnd Bergmann
Making module name conflicts a fatal error breaks sparc64 allmodconfig: Error log: error: the following would cause module name conflict: drivers/char/adi.ko drivers/input/joystick/adi.ko Renaming one of the modules would solve the problem, but then cause other problems because neither of them is automatically loaded and changing the name is likely to break any setup that relies on manually loading it by name. As there is probably no sparc64 system with this kind of ancient joystick attached, work around it by adding a Kconfig dependency that forbids them from both being modules. It is still possible to build the joystick driver if the sparc64 adi driver is built-in. Reported-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200609100643.1245061-1-arnd@arndb.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-04-22Input: xpad - add custom init packet for Xbox One S controllersŁukasz Patron
Sending [ 0x05, 0x20, 0x00, 0x0f, 0x06 ] packet for Xbox One S controllers fixes an issue where controller is stuck in Bluetooth mode and not sending any inputs. Signed-off-by: Łukasz Patron <priv.luk@gmail.com> Reviewed-by: Cameron Gutman <aicommander@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200422075206.18229-1-priv.luk@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-29Input: psxpad-spi - switch to using polled mode of input devicesDmitry Torokhov
We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts psxpad-spi driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Link: https://lore.kernel.org/r/20191001220421.GA66693@dtor-ws Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-09-05Input: sidewinder - make array seq static const, makes object smallerColin Ian King
Don't populate the array seq on the stack but instead make it static const. Makes the object code smaller by 30 bytes. Before: text data bss dec hex filename 22284 3184 0 25468 637c drivers/input/joystick/sidewinder.o After: text data bss dec hex filename 22158 3280 0 25438 635e drivers/input/joystick/sidewinder.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-11Merge tag 'v5.3-rc4' into nextDmitry Torokhov
Sync up with mainline to bring in device_property_count_u32 andother newer APIs.
2019-08-06Input: iforce - add sanity checksOliver Neukum
The endpoint type should also be checked before a device is accepted. Reported-by: syzbot+5efc10c005014d061a74@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-22Input: add support for the FlySky FS-iA6B RC receiverMarkus Koch
This patch adds support for the FlySky FS-iA6B RC receiver (serial IBUS). It allows the usage of the FlySky FS-i6 and other AFHDS compliant remote controls as a joystick input device. To use it, a patch to inputattach which adds the FS-iA6B as a 115200 baud serial device is required. I will upstream it after this patch is merged. More information about the hardware can be found here: https://notsyncing.net/?p=blog&b=2018.linux-fsia6b Signed-off-by: Markus Koch <markus@notsyncing.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-15Input: iforce - remove empty multiline commentsTim Schumacher
Those are remnants of the SPDX identifier migration, which haven't been removed properly. Signed-off-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-15Merge tag 'v5.2' into nextDmitry Torokhov
Sync up with mainline to resolve conflicts in iforce driver.
2019-06-22Input: iforce - add the Saitek R440 Force WheelTim Schumacher
This is added based on the fact that this is an iforce-based device and that the Windows driver for the R440 works for the Logitech WingMan Formula Force after replacing the device/vendor IDs. Signed-off-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - use unaligned accessors, where appropriateDmitry Torokhov
Instead of open-coding conversion from/to little-endian, let's use proper accessors. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - drop couple of temps from transport codeDmitry Torokhov
Transport initialization code now deals mostly with transport-specific data, so we can drop couple of temporary variables. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - drop bus type from iforce structureDmitry Torokhov
It is not needed anymore as behavior is controlled by the transport operations set up for given device. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - use DMA-safe buffores for USB transfersDmitry Torokhov
USB transport has to use cache line-aligned buffers for transfers to avoid DMA issues; serio doe snot have such restrictions. Let's move "data_in" buffer from main driver structure into transport modules and make sure USB requirements are respected. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - allow callers supply data buffer when fetching device IDsDmitry Torokhov
We want to move buffer handling into transport layers as the properties of buffers (DMA-safety, alignment, etc) are different for different transports. To allow this, let's allow caller to specify their own buffers for the results of iforce_get_id_packet() and let transport drivers to figure what buffers they need to use for transfers. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - only call iforce_process_packet() if initializedDmitry Torokhov
It is excessive to check if device is fully initialized in iforce_process_packet(), as for USB-conected devices we do not start collecting reports until the device is fully initialized. Let's change serio transport code to not call iforce_process_packet() until device initialization is done. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - signal command completion from transport codeDmitry Torokhov
Signalling command completion from iforce_process_packet() does not make sense, as not all transport use the same data path for both commands and motion data form the device, that is why USB code already has to signal command completion iforce_usb_out(). Let's move signalling completion into individual transport modules. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - do not combine arguments for iforce_process_packet()Dmitry Torokhov
Current code combines packet type and data length into single argument to iforce_process_packet() and then has to untangle it. It is much clearer to simply use separate arguments. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - factor out hat handling when parsing packetsDmitry Torokhov
This makes code clearer a bit. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - update formatting of switch statementsDmitry Torokhov
According to our coding style case labels in switch statements should be aligned with the switch keyword. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - use DMA-safe buffer when getting IDs from USBDmitry Torokhov
When working with USB devices we need to use DMA-safe buffers, and iforce->edata is not one. Let's rework the code to allocate temporary buffer (iforce_get_id() is called only during initialization so there is no reason to have permanent buffer) and use it. While at it, let's utilize usb_control_msg() API which simplifies code. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - split into core and transport modulesDmitry Torokhov
Now that we have moved enough transport details into separate source files we can change them into transport modules so that they are only loaded when needed. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - move transport data into transport modulesDmitry Torokhov
This moves transport-specific data from main iforce structure into transport modules. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - add bus type and parent arguments to iforce_init_device()Dmitry Torokhov
Note that the parent device for the USB-connected controllers is now USB interface instead of USB device. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - introduce start and stop io transport opsDmitry Torokhov
Add start_io() and stop_io() transport methods so that core does not have to know the details. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - move command completion handling to serio codeDmitry Torokhov
Continue teasing apart protocol-specific bits from core into transport modules. This time move RS232-specific command completion handling from core to iforce-serio module. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - move get_id to the transport operationsDmitry Torokhov
To avoid #ifdef-ing out parts of the code and having conditionals in normal control flow, let's define "get_id" transport method and move implementation into respective transport modules. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - introduce transport opsDmitry Torokhov
In order to tease apart the driver into core and transport modules, let's introduce transport operations and make "xmit" the very first one such operation. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-22Input: iforce - remove "being used" sillinessDmitry Torokhov
The kernel is supposed to handle multiple devices, static flags in packet handling code will never work. Tested-by: Tim Schumacher <timschumi@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 149Thomas Gleixner
Based on 1 normalized pattern(s): licensed under the gpl 2 or later extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 82 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190524100845.150836982@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 31Thomas Gleixner
Based on 1 normalized pattern(s): this program is free warftware you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 2 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520170857.095407238@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-03Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 5.1 merge window.
2019-02-16Input: db9 - mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/input/joystick/db9.c: In function ‘db9_saturn_read_packet’: drivers/input/joystick/db9.c:256:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (tmp == 0xff) { ^ drivers/input/joystick/db9.c:263:2: note: here default: ^~~~~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-01-14Merge tag 'v4.20' into for-linusDmitry Torokhov
Sync with mainline to get linux/overflow.h among other things.
2019-01-13Input: xpad - add support for SteelSeries Stratus DuoTom Panfil
Add support for the SteelSeries Stratus Duo, a wireless Xbox 360 controller. The Stratus Duo ships with a USB dongle to enable wireless connectivity, but it can also function as a wired controller by connecting it directly to a PC via USB, hence the need for two USD PIDs. 0x1430 is the dongle, and 0x1431 is the controller. Signed-off-by: Tom Panfil <tom@steelseries.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Mostly new IDs for Elan/Synaptics touchpads, plus a few small fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: omap-keypad - fix keyboard debounce configuration Input: xpad - quirk all PDP Xbox One gamepads Input: synaptics - enable SMBus for HP 15-ay000 Input: synaptics - add PNP ID for ThinkPad P50 to SMBus Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR Input: elan_i2c - add support for ELAN0621 touchpad Input: hyper-v - fix wakeup from suspend-to-idle Input: atkbd - clean up indentation issue Input: st1232 - convert to SPDX identifiers Input: migor_ts - convert to SPDX identifiers Input: dt-bindings - fix a typo in file input-reset.txt Input: cros_ec_keyb - fix button/switch capability reports Input: elan_i2c - add ELAN0620 to the ACPI table Input: matrix_keypad - check for errors from of_get_named_gpio()
2018-12-03Input: xpad - quirk all PDP Xbox One gamepadsCameron Gutman
Since we continue to find tons of new variants [0,1,2,3,4,5,6] that need the PDP quirk, let's just quirk all devices from PDP. [0]: https://github.com/paroj/xpad/pull/104 [1]: https://github.com/paroj/xpad/pull/105 [2]: https://github.com/paroj/xpad/pull/108 [3]: https://github.com/paroj/xpad/pull/109 [4]: https://github.com/paroj/xpad/pull/112 [5]: https://github.com/paroj/xpad/pull/115 [6]: https://github.com/paroj/xpad/pull/116 Fixes: e5c9c6a885fa ("Input: xpad - add support for PDP Xbox One controllers") Cc: stable@vger.kernel.org Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 22:33:16 +0000