summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2017-06-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Two entries being added at the same time to the IFLA policy table, whilst parallel bug fixes to decnet routing dst handling overlapping with the dst gc removal in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-21qed*: Rename qed_roce_if.h to qed_rdma_if.hKalderon, Michal
Rename the qed_roce_if file to qed_rdma_if as it represents a common interface for RoCE and iWARP. this commit affects RDMA/qedr as well. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20net: introduce __skb_put_[zero, data, u8]yuan linyu
follow Johannes Berg, semantic patch file as below, @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = __skb_put(skb, len); +p = __skb_put_zero(skb, len); | -p = (t)__skb_put(skb, len); +p = __skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ identifier p; expression len; expression skb; type t; @@ ( -t p = __skb_put(skb, len); +t p = __skb_put_zero(skb, len); ) ... when != p ( -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = __skb_put(skb, sizeof(t)); +p = __skb_put_zero(skb, sizeof(t)); | -p = (t *)__skb_put(skb, sizeof(t)); +p = __skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(__skb_put(skb, len), 0, len); +__skb_put_zero(skb, len); @@ expression skb, len, data; @@ -memcpy(__skb_put(skb, len), data, len); +__skb_put_data(skb, data, len); @@ expression SKB, C, S; typedef u8; identifier fn = {__skb_put}; fresh identifier fn2 = fn ## "_u8"; @@ - *(u8 *)fn(SKB, S) = C; + fn2(SKB, C); Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20qed*: Set rdma generic functions prefixMichal Kalderon
Rename the functions common to both iWARP and RoCE to have a prefix of _rdma_ instead of _roce_. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20qed*: qede_roce.[ch] -> qede_rdma.[ch]Michal Kalderon
Once we have iWARP support, the qede portion of the qedr<->qede would serve all the RDMA protocols - so rename the file to be appropriate to its function. While we're at it, we're also moving a couple of inclusions to it into .h files and adding includes to make sure it contains all type definitions it requires. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20qed: Chain support for external PBLMintz, Yuval
iWARP would require the chains to allocate/free their PBL memory independently, so add the infrastructure to provide it externally. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16Merge tag 'mlx5-updates-2017-06-16' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox mlx5 updates and cleanups 2017-06-16 mlx5-updates-2017-06-16 This series provide some updates and cleanups for mlx5 core and netdevice driver. From Eli Cohen, add a missing event string. From Or Gerlitz, some checkpatch cleanups. From Moni, Disalbe HW level LAG when SRIOV is enabled. From Tariq, A code reuse cleanup in aRFS flow. From Itay Aveksis, Typo fix. From Gal Pressman, ethtool statistics updates and "update stats" deferred work optimizations. From Majd Dibbiny, Fast unload support on kernel shutdown. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_put & friends return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: convert many more places to skb_put_zero()Johannes Berg
There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "I had thought at the time of the last pull request that there wouldn't be much more to go, but several things just kept trickling in over the last week. Instead of just the six patches to bnxt_re that I had anticipated, there are another five IPoIB patches, two qedr patches, and a few other miscellaneous patches. The bnxt_re patches are more lines of diff than I like to submit this late in the game. That's mostly because of the first two patches in the series of six. I almost dropped them just because of the lines of churn, but on a close review, a lot of the churn came from removing duplicated code sections and consolidating them into callable routines. I felt like this made the number of lines of change more acceptable, and they address problems, so I left them. The remainder of the patches are all small, well contained, and well understood. These have passed 0day testing, but have not been submitted to linux-next (but a local merge test with your current master was without any conflicts). Summary: - A fix for fix eea40b8f624 ("infiniband: call ipv6 route lookup via the stub interface") - Six patches against bnxt_re...the first two are considerably larger than I would like, but as they address real issues I went ahead and submitted them (it also helped that a good deal of the churn was removing code repeated in multiple places and consolidating it to one common function) - Two fixes against qedr that just came in - One fix against rxe that took a few revisions to get right plus time to get the proper reviews - Five late breaking IPoIB fixes - One late cxgb4 fix" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: rdma/cxgb4: Fix memory leaks during module exit IB/ipoib: Fix memory leak in create child syscall IB/ipoib: Fix access to un-initialized napi struct IB/ipoib: Delete napi in device uninit default IB/ipoib: Limit call to free rdma_netdev for capable devices IB/ipoib: Fix memory leaks for child interfaces priv rxe: Fix a sleep-in-atomic bug in post_one_send RDMA/qedr: Add 64KB PAGE_SIZE support to user-space queues RDMA/qedr: Initialize byte_len in WC of READ and SEND commands RDMA/bnxt_re: Remove FMR support RDMA/bnxt_re: Fix RQE posting logic RDMA/bnxt_re: Add HW workaround for avoiding stall for UD QPs RDMA/bnxt_re: Dereg MR in FW before freeing the fast_reg_page_list RDMA/bnxt_re: HW workarounds for handling specific conditions RDMA/bnxt_re: Fixing the Control path command and response handling IB/addr: Fix setting source address in addr6_resolve()
2017-06-16net/mlx5: Fix some spelling mistakesOr Gerlitz
Fixed few places where endianness was misspelled and one spot whwere output was: CHECK: 'endianess' may be misspelled - perhaps 'endianness'? CHECK: 'ouput' may be misspelled - perhaps 'output'? Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a bug on sparc where we may dereference freed stack memory" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: Work around deallocated stack frame reference gcc bug on sparc.
2017-06-14rdma/cxgb4: Fix memory leaks during module exitRaju Rangoju
Fix memory leaks of iw_cxgb4 module in the exit path Signed-off-by: Raju Rangoju <rajur@chelsio.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14IB/ipoib: Fix memory leak in create child syscallFeras Daoud
The flow of creating a new child goes through ipoib_vlan_add which allocates a new interface and checks the rtnl_lock. If the lock is taken, restart_syscall will be called to restart the system call again. In this case we are not releasing the already allocated interface, causing a leak. Fixes: 9baa0b036410 ("IB/ipoib: Add rtnl_link_ops support") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14IB/ipoib: Fix access to un-initialized napi structAlex Vesker
There is no need to re-enable napi since we set the initialized flag before calling ipoib_ib_dev_stop which will disable napi, disabling napi twice is harmless in case it was already disabled. One more reason for this fix is that when using IPoIB new device driver napi is not added to priv, this can lead to kernel panic when rn_ops ndo_open fails. [ 289.755840] invalid opcode: 0000 [#1] SMP [ 289.757111] task: ffff880036964440 ti: ffff880178ee8000 task.ti: ffff880178ee8000 [ 289.757111] RIP: 0010:[<ffffffffa05368d6>] [<ffffffffa05368d6>] napi_enable.part.24+0x4/0x6 [ib_ipoib] [ 289.757111] RSP: 0018:ffff880178eeb6d8 EFLAGS: 00010246 [ 289.757111] RAX: 0000000000000000 RBX: ffff880177a80010 RCX: 000000007fffffff [ 289.757111] RDX: ffffffff81d5f118 RSI: 0000000000000000 RDI: ffff880177a80010 [ 289.757111] RBP: ffff880178eeb6d8 R08: 0000000000000082 R09: 0000000000000283 [ 289.757111] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880175a00000 [ 289.757111] R13: ffff880177a80080 R14: 0000000000000000 R15: 0000000000000001 [ 289.757111] FS: 00007fe2ee346880(0000) GS:ffff88017fc00000(0000) knlGS:0000000000000000 [ 289.757111] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 289.757111] CR2: 00007fffca979020 CR3: 00000001792e4000 CR4: 00000000000006f0 [ 289.757111] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 289.757111] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 289.757111] Stack: [ 289.796027] ffff880178eeb6f0 ffffffffa05251f5 ffff880177a80000 ffff880178eeb718 [ 289.796027] ffffffffa0528505 ffff880175a00000 ffff880177a80000 0000000000000000 [ 289.796027] ffff880178eeb748 ffffffffa051f0ab ffff880175a00000 ffffffffa0537d60 [ 289.796027] Call Trace: [ 289.796027] [<ffffffffa05251f5>] napi_enable+0x25/0x30 [ib_ipoib] [ 289.796027] [<ffffffffa0528505>] ipoib_ib_dev_open+0x175/0x190 [ib_ipoib] [ 289.796027] [<ffffffffa051f0ab>] ipoib_open+0x4b/0x160 [ib_ipoib] [ 289.796027] [<ffffffff814fe33f>] _dev_open+0xbf/0x130 [ 289.796027] [<ffffffff814fe62d>] __dev_change_flags+0x9d/0x170 [ 289.796027] [<ffffffff814fe729>] dev_change_flags+0x29/0x60 [ 289.796027] [<ffffffff8150caf7>] do_setlink+0x397/0xa40 Fixes: cd565b4b51e5 ('IB/IPoIB: Support acceleration options callbacks') Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14IB/ipoib: Delete napi in device uninit defaultAlex Vesker
This patch mekas init_default and uninit_default symmetric with a call to delete napi. Additionally, the uninit_default gained delete napi call in case of init_default fails. Fixes: 515ed4f3aab4 ('IB/IPoIB: Separate control and data related initializations') Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14IB/ipoib: Limit call to free rdma_netdev for capable devicesAlex Vesker
Limit calls to free_rdma_netdev() for capable devices only. Fixes: cd565b4b51e5 ('IB/IPoIB: Support acceleration options callbacks') Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14IB/ipoib: Fix memory leaks for child interfaces privAlex Vesker
There is a need to free priv explicitly and not just to release the device, child priv is freed explicitly on remove flow and this patch also includes priv free on error flow in P_key creation and also in add_port. Fixes: cd565b4b51e5 ('IB/IPoIB: Support acceleration options callbacks') Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14rxe: Fix a sleep-in-atomic bug in post_one_sendJia-Ju Bai
The driver may sleep under a spin lock, and the function call path is: post_one_send (acquire the lock by spin_lock_irqsave) init_send_wqe copy_from_user --> may sleep There is no flow that makes "qp->is_user" true, and copy_from_user may cause bug when a non-user pointer is used. So the lines of copy_from_user and check of "qp->is_user" are removed. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14RDMA/qedr: Add 64KB PAGE_SIZE support to user-space queuesRam Amrani
Add 64KB PAGE_SIZE support to user-space CQ, SQ and RQ queues. De-facto it means that code was added to translate 64KB pages to smaller 4KB pages that the FW can handle. Otherwise, the FW would wrap (or jump to the next page) when reaching 4KB while the user space library will continue on the same large page. Note that MR code remains as is since the FW supports larger pages for MRs. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14RDMA/qedr: Initialize byte_len in WC of READ and SEND commandsMichal Kalderon
Initialize byte_len in work completion of RDMA_READ and RDMA_SEND. Exposed by uDAPL application. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14RDMA/bnxt_re: Remove FMR supportSelvin Xavier
Some issues observed with FMR implementation while running stress traffic. So removing the FMR verbs support for now. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14RDMA/bnxt_re: Fix RQE posting logicDevesh Sharma
This patch adds code to ring RQ Doorbell aggressively so that the adapter can DMA RQ buffers sooner, instead of DMA all WQEs in the post_recv WR list together at the end of the post_recv verb. Also use spinlock to serialize RQ posting Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14RDMA/bnxt_re: Add HW workaround for avoiding stall for UD QPsSomnath Kotur
HW stalls out after 0x800000 WQEs are posted for UD QPs. To workaround this problem, driver will send a modify_qp cmd to the HW at around the halfway mark(0x400000) so that FW can accordingly modify the QP context in the HW to prevent this stall. This workaround needs to be done for UD, QP1 and Raw Ethertype packets. Added a counter to keep track of WQEs posted during post_send. Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14RDMA/bnxt_re: Dereg MR in FW before freeing the fast_reg_page_listSelvin Xavier
If the host buffers are freed before destroying MR in HW, HW could try accessing these buffers. This could cause a host crash. Fixing the code to avoid this condition. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-14RDMA/bnxt_re: HW workarounds for handling specific conditionsEddie Wai
This patch implements the following HW workarounds 1. The SQ depth needs to be augmented by 128 + 1 to avoid running into an Out of order CQE issue 2. Workaround to handle the problem where the HW fast path engine continues to access DMA memory in retranmission mode even after the WQE has already been completed. If the HW reports this condition, driver detects it and posts a Fence WQE. The driver stops reporting the completions to stack until it receives completion for Fence WQE. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-13RDMA/bnxt_re: Fixing the Control path command and response handlingDevesh Sharma
Fixing a concurrency issue with creq handling. Each caller was given a globally managed crsq element, which was accessed outside a lock. This could result in corruption, if lot of applications are simultaneously issuing Control Path commands. Now, each caller will provide its own response buffer and the responses will be copied under a lock. Also, Fixing the queue full condition check for the CMDQ. As a part of these changes, the control path code is refactored to remove the code replication in the response status checking. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-09qed*: LL2 callback operationsMichal Kalderon
LL2 today is interrupt driven - when tx/rx completion arrives [or any other indication], qed needs to operate on the connection and pass the information to the protocol-driver [or internal qed consumer]. Since we have several flavors of ll2 employeed by the driver, each handler needs to do an if-else to determine the right functionality to use based on the connection type. In order to make things more scalable [given that we're going to add additional types of ll2 flavors] move the infrastrucutre into using a callback-based approach - the callbacks would be provided as part of the connection's initialization parameters. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08tcp: add a struct net parameter to tcp_parse_options()Eric Dumazet
We want to move some TCP sysctls to net namespaces in the future. tcp_window_scaling, tcp_sack and tcp_timestamps being fetched from tcp_parse_options(), we need to pass an extra parameter. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08crypto: Work around deallocated stack frame reference gcc bug on sparc.David Miller
On sparc, if we have an alloca() like situation, as is the case with SHASH_DESC_ON_STACK(), we can end up referencing deallocated stack memory. The result can be that the value is clobbered if a trap or interrupt arrives at just the right instruction. It only occurs if the function ends returning a value from that alloca() area and that value can be placed into the return value register using a single instruction. For example, in lib/libcrc32c.c:crc32c() we end up with a return sequence like: return %i7+8 lduw [%o5+16], %o0 ! MEM[(u32 *)__shash_desc.1_10 + 16B], %o5 holds the base of the on-stack area allocated for the shash descriptor. But the return released the stack frame and the register window. So if an intererupt arrives between 'return' and 'lduw', then the value read at %o5+16 can be corrupted. Add a data compiler barrier to work around this problem. This is exactly what the gcc fix will end up doing as well, and it absolutely should not change the code generated for other cpus (unless gcc on them has the same bug :-) With crucial insight from Eric Sandeen. Cc: <stable@vger.kernel.org> Reported-by: Anatoly Pugachev <matorola@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-07IB/mlx4: Bump driver versionTariq Toukan
Remove date and bump version for mlx4_ib driver. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07cxgb4: Fix tids count for ipv6 offload connectionGanesh Goudar
the adapter consumes two tids for every ipv6 offload connection be it active or passive, calculate tid usage count accordingly. Also change the signatures of relevant functions to get the address family. Signed-off-by: Rizwan Ansari <rizwana@chelsio.com> Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07IB/addr: Fix setting source address in addr6_resolve()Roland Dreier
Commit eea40b8f624f ("infiniband: call ipv6 route lookup via the stub interface") introduced a regression in address resolution when connecting to IPv6 destination addresses. The old code called ip6_route_output(), while the new code calls ipv6_stub->ipv6_dst_lookup(). The two are almost the same, except that ipv6_dst_lookup() also calls ip6_route_get_saddr() if the source address is in6addr_any. This means that the test of ipv6_addr_any(&fl6.saddr) now never succeeds, and so we never copy the source address out. This ends up causing rdma_resolve_addr() to fail, because without a resolved source address, cma_acquire_dev() will fail to find an RDMA device to use. For me, this causes connecting to an NVMe over Fabrics target via RoCE / IPv6 to fail. Fix this by copying out fl6.saddr if ipv6_addr_any() is true for the original source address passed into addr6_resolve(). We can drop our call to ipv6_dev_get_saddr() because ipv6_dst_lookup() already does that work. Fixes: eea40b8f624 ("infiniband: call ipv6 route lookup via the stub interface") Cc: <stable@vger.kernel.org> # 3.12+ Signed-off-by: Roland Dreier <roland@purestorage.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Just some simple overlapping changes in marvell PHY driver and the DSA core code. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01RDMA/SA: Fix kernel panic in CMA request handler flowMajd Dibbiny
Commit 9fdca4da4d8c (IB/SA: Split struct sa_path_rec based on IB and ROCE specific fields) moved the service_id to be specific attribute for IB and OPA SA Path Record, and thus wasn't assigned for RoCE. This caused to the following kernel panic in the CMA request handler flow: [ 27.074594] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 27.074731] IP: __radix_tree_lookup+0x1d/0xe0 ... [ 27.075356] Workqueue: ib_cm cm_work_handler [ib_cm] [ 27.075401] task: ffff88022e3b8000 task.stack: ffffc90001298000 [ 27.075449] RIP: 0010:__radix_tree_lookup+0x1d/0xe0 ... [ 27.075979] Call Trace: [ 27.076015] radix_tree_lookup+0xd/0x10 [ 27.076055] cma_ps_find+0x59/0x70 [rdma_cm] [ 27.076097] cma_id_from_event+0xd2/0x470 [rdma_cm] [ 27.076144] ? ib_init_ah_from_path+0x39a/0x590 [ib_core] [ 27.076193] cma_req_handler+0x25/0x480 [rdma_cm] [ 27.076237] cm_process_work+0x25/0x120 [ib_cm] [ 27.076280] ? cm_get_bth_pkey.isra.62+0x3c/0xa0 [ib_cm] [ 27.076350] cm_req_handler+0xb03/0xd40 [ib_cm] [ 27.076430] ? sched_clock_cpu+0x11/0xb0 [ 27.076478] cm_work_handler+0x194/0x1588 [ib_cm] [ 27.076525] process_one_work+0x160/0x410 [ 27.076565] worker_thread+0x137/0x4a0 [ 27.076614] kthread+0x112/0x150 [ 27.076684] ? max_active_store+0x60/0x60 [ 27.077642] ? kthread_park+0x90/0x90 [ 27.078530] ret_from_fork+0x2c/0x40 This patch moves it back to the common SA Path Record structure and removes the redundant setter and getter. Tested on Connect-IB and Connect-X4 in Infiniband and RoCE respectively. Fixes: 9fdca4da4d8c (IB/SA: Split struct sa_path_rec based on IB ands ROCE specific fields) Signed-off-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01RDMA/umem: Fix missing mmap_sem in get umem ODP callLeon Romanovsky
Add mmap_sem lock around VMA inspection in ib_umem_odp_get(). Fixes: 0008b84ea9af ('IB/umem: Add support to huge ODP') Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01RDMA/core: not to set page dirty bit if it's already set.Qing Huang
This change will optimize kernel memory deregistration operations. __ib_umem_release() used to call set_page_dirty_lock() against every writable page in its memory region. Its purpose is to keep data synced between CPU and DMA device when swapping happens after mem deregistration ops. Now we choose not to set page dirty bit if it's already set by kernel prior to calling __ib_umem_release(). This reduces memory deregistration time by half or even more when we ran application simulation test program. Signed-off-by: Qing Huang <qing.huang@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01RDMA/uverbs: Declare local function static and add brackets to sizeofLeon Romanovsky
Commit 57520751445b ("IB/SA: Add OPA path record type") introduced new local function __ib_copy_path_rec_to_user, but didn't limit its scope. This produces the following sparse warning: drivers/infiniband/core/uverbs_marshall.c:99:6: warning: symbol '__ib_copy_path_rec_to_user' was not declared. Should it be static? In addition, it used sizeof ... notations instead of sizeof(...), which is correct in C, but a little bit misleading. Let's change it too. Fixes: 57520751445b ("IB/SA: Add OPA path record type") Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01RDMA/netlink: Reduce exposure of RDMA netlink functionsLeon Romanovsky
RDMA netlink is part of ib_core, hence ibnl_chk_listeners(), ibnl_init() and ibnl_cleanup() don't need to be published in public header file. Let's remove EXPORT_SYMBOL from ibnl_chk_listeners() and move all these functions to private header file. CC: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01RDMA/srp: Fix NULL deref at srp_destroy_qp()Israel Rukshin
If srp_init_qp() fails at srp_create_ch_ib() then ch->send_cq may be NULL. Calling directly to ib_destroy_qp() is sufficient because no work requests were posted on the created qp. Fixes: 9294000d6d89 ("IB/srp: Drain the send queue before destroying a QP") Cc: <stable@vger.kernel.org> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Bart van Assche <bart.vanassche@sandisk.com>-- Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01RDMA/IPoIB: Limit the ipoib_dev_uninit_default scopeLeon Romanovsky
ipoib_dev_uninit_default() call is used in ipoib_main.c file only and it generates the following warning from smatch tool: drivers/infiniband/ulp/ipoib/ipoib_main.c:1593:6: warning: symbol 'ipoib_dev_uninit_default' was not declared. Should it be static? so let's declare that function as static. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01RDMA/IPoIB: Replace netdev_priv with ipoib_priv for ipoib_get_link_ksettingsHonggang Li
ipoib_dev_init accesses the wrong private data for the IPoIB device. Commit cd565b4b51e5 (IB/IPoIB: Support acceleration options callbacks) changed ipoib_priv from being identical to netdev_priv to being an area inside of, but not the same pointer as, the netdev_priv pointer. As such, the struct we want is the ipoib_priv area, not the netdev_priv area, so use the right accessor, otherwise we kernel panic. [ 27.271938] IPv6: ADDRCONF(NETDEV_CHANGE): mlx5_ib0.8006: link becomes ready [ 28.156790] BUG: unable to handle kernel NULL pointer dereference at 000000000000067c [ 28.166309] IP: ib_query_port+0x30/0x180 [ib_core] ... [ 28.306282] RIP: 0010:ib_query_port+0x30/0x180 [ib_core] ... [ 28.393337] Call Trace: [ 28.397594] ipoib_get_link_ksettings+0x66/0xe0 [ib_ipoib] [ 28.405274] __ethtool_get_link_ksettings+0xa0/0x1c0 [ 28.412353] speed_show+0x74/0xa0 [ 28.417503] dev_attr_show+0x20/0x50 [ 28.422922] ? mutex_lock+0x12/0x40 [ 28.428179] sysfs_kf_seq_show+0xbf/0x1a0 [ 28.434002] kernfs_seq_show+0x21/0x30 [ 28.439470] seq_read+0x116/0x3b0 [ 28.444445] ? do_filp_open+0xa5/0x100 [ 28.449774] kernfs_fop_read+0xff/0x180 [ 28.455220] __vfs_read+0x37/0x150 [ 28.460167] ? security_file_permission+0x9d/0xc0 [ 28.466560] vfs_read+0x8c/0x130 [ 28.471318] SyS_read+0x55/0xc0 [ 28.475950] do_syscall_64+0x67/0x150 [ 28.481163] entry_SYSCALL64_slow_path+0x25/0x25 ... [ 28.584493] ---[ end trace 3549968a4bf0aa5d ]--- Fixes: cd565b4b51e5 (IB/IPoIB: Support acceleration options callbacks) Fixes: 0d7e2d2166f6 (IB/ipoib: add get_link_ksettings in ethtool) Signed-off-by: Honggang Li <honli@redhat.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01RDMA/qedr: add null check before pointer dereferenceGustavo A. R. Silva
Add null check before dereferencing pointer sgid_attr.ndev inside function rdma_vlan_dev_vlan_id(). Addresses-Coverity-ID: 1373979 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01RDMA/mlx5: set UMR wqe fence according to HCA capMax Gurtovoy
Cache the needed umr_fence and set the wqe ctrl segmennt accordingly. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Acked-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01RDMA/mlx4: Fix MAD tunneling when SRIOV is enabledJack Morgenstein
The cited patch added a type field to structures ib_ah and rdma_ah_attr. Function mlx4_ib_query_ah() builds an rdma_ah_attr structure from the data in an mlx4_ib_ah structure (which contains both an ib_ah structure and an address vector). For mlx4_ib_query_ah() to work properly, the type field in the contained ib_ah structure must be set correctly. In the outgoing MAD tunneling flow, procedure mlx4_ib_multiplex_mad() paravirtualizes a MAD received from a slave and sends the processed mad out over the wire. During this processing, it populates an mlx4_ib_ah structure and calls mlx4_ib_query_ah(). The cited commit overlooked setting the type field in the contained ib_ah structure before invoking mlx4_ib_query_ah(). As a result, the type field remained uninitialized, and the rdma_ah_attr structure was incorrectly built. This resulted in improperly built MADs being sent out over the wire. This patch properly initializes the type field in the contained ib_ah structure before calling mlx4_ib_query_ah(). The rdma_ah_attr structure is then generated correctly. Fixes: 44c58487d51a ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01RDMA/qib,hfi1: Fix MR reference count leak on write with immediateMike Marciniszyn
The handling of IB_RDMA_WRITE_ONLY_WITH_IMMEDIATE will leak a memory reference when a buffer cannot be allocated for returning the immediate data. The issue is that the rkey validation has already occurred and the RNR nak fails to release the reference that was fruitlessly gotten. The the peer will send the identical single packet request when its RNR timer pops. The fix is to release the held reference prior to the rnr nak exit. This is the only sequence the requires both rkey validation and the buffer allocation on the same packet. Cc: Stable <stable@vger.kernel.org> # 4.7+ Tested-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01RDMA/hfi1: Defer setting VL15 credits to link-up interruptByczkowski, Jakub
Keep VL15 credits at 0 during LNI, before link-up. Store VL15 credits value during verify cap interrupt and set in after link-up. This addresses an issue where VL15 MAD packets could be sent by one side of the link before the other side is ready to receive them. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01RDMA/hfi1: change PCI bar addr assignments to Linux API functionsSteven L. Roberts
The Omni-Path adapter driver fails to load on the ppc64le platform due to invalid PCI setup. This patch makes the PCI configuration more robust and will fix 64 bit addressing for ppc64le. Signed-off-by: Steven L Roberts <robers97@gmail.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 18:18:17 +0000