summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2007-10-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/fmr_pool: Stop ib_fmr threads from contributing to load average IB/ipath: Fix incorrect use of sizeof on msg buffer (function argument) IB/ipath: Limit length checksummed in eeprom IB/ipath: Fix a race where s_last is updated without lock held IB/mlx4: Lock SQ lock in mlx4_ib_post_send() IPoIB/cm: Fix receive QP cleanup
2007-10-30IB/fmr_pool: Stop ib_fmr threads from contributing to load averageAnton Blanchard
I noticed my machine was at a constant load average of 1. This was because ib_create_fmr_pool calls kthread_create but does not immediately wake the thread up. Change to using kthread_run so we enter ib_fmr_cleanup_thread(), set TASK_INTERRUPTIBLE, then go to sleep. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-30IB/ipath: Fix incorrect use of sizeof on msg buffer (function argument)Dave Olson
Inside a function declared as void foo(char bar[512]) the value of sizeof bar is the size of a pointer, not 512. So avoid constructions like this by passing the size explicitly. Also reduce the size of the buffer to 128 bytes (512 was overly generous). Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-30IB/ipath: Limit length checksummed in eepromMichael Albaugh
The small eeprom that holds the GUID etc. contains a data-length, but if the actual eeprom is new or has been erased, that byte will be 0xFF, which is greater than the maximum physical length of the eeprom, and more importantly greater than the length of the buffer we vmalloc'd. Sanity-check the length to avoid the possbility of reading past end of buffer. Signed-off-by: Michael Albaugh <Michael.Albaugh@Qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-30IB/ipath: Fix a race where s_last is updated without lock heldRalph Campbell
There is a small window where a send work queue entry could be overwritten by ib_post_send() because s_last is updated before the entry is read. This patch closes the window by acquiring the lock and updating the last send work queue entry index after reading the wr_id. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-30IB/mlx4: Lock SQ lock in mlx4_ib_post_send()Roland Dreier
Because of a typo, mlx4_ib_post_send() takes the same lock rq.lock as mlx4_ib_post_recv(). Correct the code so the intended sq.lock is taken when posting a send. Noticed by Yossi Leybovitch and pointed out by Jack Morgenstein from Mellanox. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-26IPoIB/cm: Fix receive QP cleanupRoland Dreier
Commit 1b524963 ("IPoIB/cm: Use common CQ for CM send completions") changed how the high-order bits of work request IDs were used, which had the effect that IPOIB_CM_RX_DRAIN_WRID was no longer handled as a connected mode receive completion. This leads to the messages ib1: cm send completion event with wrid 1073741823 (> 64) ib1: RX drain timing out when an interface with connected mode QPs is brought down. Fix this by making sure that both IPOIB_OP_CM and IPOIB_OP_RECV are set in IPOIB_CM_RX_DRAIN_WRID. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-24SG: Change sg_set_page() to take length and offset argumentJens Axboe
Most drivers need to set length and offset as well, so may as well fold those three lines into one. Add sg_assign_page() for those two locations that only needed to set the page, where the offset/length is set outside of the function context. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Increase command timeout for INIT_HCA to 10 seconds IPoIB/cm: Use common CQ for CM send completions IB/uverbs: Fix checking of userspace object ownership IB/mlx4: Sanity check userspace send queue sizes IPoIB: Rewrite "if (!likely(...))" as "if (unlikely(!(...)))" IB/ehca: Enable large page MRs by default IB/ehca: Change meaning of hca_cap_mr_pgsize IB/ehca: Fix ehca_encode_hwpage_size() and alloc_fmr() IB/ehca: Fix masking error in {,re}reg_phys_mr() IB/ehca: Supply QP token for SRQ base QPs IPoIB: Use round_jiffies() for ah_reap_task RDMA/cma: Fix deadlock destroying listen requests RDMA/cma: Add locking around QP accesses IB/mthca: Avoid alignment traps when writing doorbells mlx4_core: Kill mlx4_write64_raw()
2007-10-23IB/ehca: Fix sg_page() falloutOlof Johansson
More fallout from sg_page changes: drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_set_pagebuf_user1': drivers/infiniband/hw/ehca/ehca_mrmw.c:1779: error: 'struct scatterlist' has no member named 'page' drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_check_kpages_per_ate': drivers/infiniband/hw/ehca/ehca_mrmw.c:1835: error: 'struct scatterlist' has no member named 'page' drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_set_pagebuf_user2': drivers/infiniband/hw/ehca/ehca_mrmw.c:1870: error: 'struct scatterlist' has no member named 'page' Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22[SG] Update drivers to use sg helpersJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-19IPoIB/cm: Use common CQ for CM send completionsMichael S. Tsirkin
Use the same CQ for CM send completions as for all other IPoIB completions. This means all completions are processed via the same NAPI polling routine. This should help reduce the number of interrupts for bi-directional traffic (such as TCP) and fixes "driver is hogging interrupts" errors reported for IPoIB send side, e.g. <https://bugs.openfabrics.org/show_bug.cgi?id=508> To do this, keep a per-interface counter of outstanding send WRs, and stop the interface when this counter reaches the send queue size to avoid CQ overruns. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-19IB/uverbs: Fix checking of userspace object ownershipRoland Dreier
Commit 9ead190b ("IB/uverbs: Don't serialize with ib_uverbs_idr_mutex") rewrote how userspace objects are looked up in the uverbs module's idrs, and introduced a severe bug in the process: there is no checking that an operation is being performed by the right process any more. Fix this by adding the missing check of uobj->context in __idr_get_uobj(). Apparently everyone is being very careful to only touch their own objects, because this bug was introduced in June 2006 in 2.6.18, and has gone undetected until now. Cc: stable <stable@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-18[INET]: Justification for local port range robustness.Anton Arapov
There is a justifying patch for Stephen's patches. Stephen's patches disallows using a port range of one single port and brakes the meaning of the 'remaining' variable, in some places it has different meaning. My patch gives back the sense of 'remaining' variable. It should mean how many ports are remaining and nothing else. Also my patch allows using a single port. I sure we must be able to use mentioned port range, this does not restricted by documentation and does not brake current behavior. usefull links: Patches posted by Stephen Hemminger http://marc.info/?l=linux-netdev&m=119206106218187&w=2 http://marc.info/?l=linux-netdev&m=119206109918235&w=2 Andrew Morton's comment http://marc.info/?l=linux-kernel&m=119248225007737&w=2 1. Allows using a port range of one single port. 2. Gives back sense of 'remaining' variable. Signed-off-by: Anton Arapov <aarapov@redhat.com> Acked-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-18Add missing newlines to some uses of dev_<level> messagesJoe Perches
Found these while looking at printk uses. Add missing newlines to dev_<level> uses Add missing KERN_<level> prefixes to multiline dev_<level>s Fixed a wierd->weird spelling typo Added a newline to a printk Signed-off-by: Joe Perches <joe@perches.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Smart <James.Smart@Emulex.Com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18IB/mlx4: Sanity check userspace send queue sizesJack Morgenstein
Add sanity checks to send queue sizes passed in from userspace. The minimum sq stride value below is taken from the MT25408 PRM (section 11.10, Table 306, log_sq_stride definition). Without this check, userspace can submit arbitrarily large/small values for the number of WQEs and the stride, which can crash the kernel. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17IPoIB: Rewrite "if (!likely(...))" as "if (unlikely(!(...)))"Roland Dreier
It's too hard to figure out what "!likely(...)" really means, and who knows how compilers interpret the hint. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17IB/ehca: Enable large page MRs by defaultJoachim Fenkes
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17IB/ehca: Change meaning of hca_cap_mr_pgsizeJoachim Fenkes
ehca_shca.hca_cap_mr_pgsize now contains all supported page sizes ORed together. This makes some checks easier to code and understand, plus we can return this value verbatim in query_hca(), fixing a problem with SRP (reported by Anton Blanchard -- thanks!). Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17IB/ehca: Fix ehca_encode_hwpage_size() and alloc_fmr()Joachim Fenkes
Simplify ehca_encode_hwpage_size(), fixing an infinite loop for pgsize == 0 in the process. Fix the bug in alloc_fmr() that triggered the loop. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17IB/ehca: Fix masking error in {,re}reg_phys_mr()Joachim Fenkes
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17IB/ehca: Supply QP token for SRQ base QPsJoachim Fenkes
Because hardware reports the SRQ token in RWQEs of SRQ base QPs, supply the base QP token as SRQ token, so we can properly find the SRQ base QP. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17[POWERPC] ibmebus: Move to of_device and of_platform_driver, match eHCA and ↵Joachim Fenkes
eHEA drivers Replace struct ibmebus_dev and struct ibmebus_driver with struct of_device and struct of_platform_driver, respectively. Match the external ibmebus interface and drivers using it. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Roland Dreier <rolandd@cisco.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-16IPoIB: Use round_jiffies() for ah_reap_taskAnton Blanchard
Use round_jiffies() to align the 1 second ah_reap_task with other work and potentially save power by sleeping cores for longer. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-16RDMA/cma: Fix deadlock destroying listen requestsSean Hefty
Deadlock condition reported by Kanoj Sarcar <kanoj@netxen.com>. The deadlock occurs when a connection request arrives at the same time that a wildcard listen is being destroyed. A wildcard listen maintains per device listen requests for each RDMA device in the system. The per device listens are automatically added and removed when RDMA devices are inserted or removed from the system. When a wildcard listen is destroyed, rdma_destroy_id() acquires the rdma_cm's device mutex ('lock') to protect against hot-plug events adding or removing per device listens. It then tries to destroy the per device listens by calling ib_destroy_cm_id() or iw_destroy_cm_id(). It does this while holding the device mutex. However, if the underlying iw/ib CM reports a connection request while this is occurring, the rdma_cm callback function will try to acquire the same device mutex. Since we're in a callback, the ib_destroy_cm_id() or iw_destroy_cm_id() calls will block until their callback thread returns, but the callback is blocked waiting for the device mutex. Fix this by re-working how per device listens are destroyed. Use rdma_destroy_id(), which avoids the deadlock, in place of cma_destroy_listen(). Additional synchronization is added to handle device hot-plug events and ensure that the id is not destroyed twice. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-16RDMA/cma: Add locking around QP accessesSean Hefty
If a user allocates a QP on an rdma_cm_id, the rdma_cm will automatically transition the QP through its states (RTR, RTS, error, etc.) While the QP state transitions are occurring, the QP itself must remain valid. Provide locking around the QP pointer to prevent its destruction while accessing the pointer. This fixes an issue reported by Olaf Kirch from Oracle that resulted in a system crash: "An incoming connection arrives and we decide to tear down the nascent connection. The remote ends decides to do the same. We start to shut down the connection, and call rdma_destroy_qp on our cm_id. ... Now apparently a 'connect reject' message comes in from the other host, and cma_ib_handler() is called with an event of IB_CM_REJ_RECEIVED. It calls cma_modify_qp_err, which for some odd reason tries to modify the exact same QP we just destroyed." Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-16infiniband: sg chaining supportJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-15IB/mthca: Avoid alignment traps when writing doorbellsRoland Dreier
Architectures such as ia64 see alignment traps when doing a 64-bit read from __be32 doorbell[2] arrays to do doorbell writes in mthca_write64(). Fix this by just passing the two halves of the doorbell value into mthca_write64(). This actually improves the generated code by allowing the compiler to see what's going on better. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-15IB/ipoib: Verify address handle validity on sendMoni Shoua
When the bonding device senses a carrier loss of its active slave it replaces that slave with a new one. In between the times when the carrier of an IPoIB device goes down and ipoib_neigh is destroyed, it is possible that the bonding driver will send a packet on a new slave that uses an old ipoib_neigh. This patch detects and prevents this from happenning. Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: Roland Dreier <rdreier@cisco.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15IB/ipoib: Bound the net device to the ipoib_neigh structueMoni Shoua
IPoIB uses a two layer neighboring scheme, such that for each struct neighbour whose device is an ipoib one, there is a struct ipoib_neigh buddy which is created on demand at the tx flow by an ipoib_neigh_alloc(skb->dst->neighbour) call. When using the bonding driver, neighbours are created by the net stack on behalf of the bonding (master) device. On the tx flow the bonding code gets an skb such that skb->dev points to the master device, it changes this skb to point on the slave device and calls the slave hard_start_xmit function. Under this scheme, ipoib_neigh_destructor assumption that for each struct neighbour it gets, n->dev is an ipoib device and hence netdev_priv(n->dev) can be casted to struct ipoib_dev_priv is buggy. To fix it, this patch adds a dev field to struct ipoib_neigh which is used instead of the struct neighbour dev one, when n->dev->flags has the IFF_MASTER bit set. Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: Roland Dreier <rdreier@cisco.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (207 commits) [SCSI] gdth: fix CONFIG_ISA build failure [SCSI] esp_scsi: remove __dev{init,exit} [SCSI] gdth: !use_sg cleanup and use of scsi accessors [SCSI] gdth: Move members from SCp to gdth_cmndinfo, stage 2 [SCSI] gdth: Setup proper per-command private data [SCSI] gdth: Remove gdth_ctr_tab[] [SCSI] gdth: switch to modern scsi host registration [SCSI] gdth: gdth_interrupt() gdth_get_status() & gdth_wait() fixes [SCSI] gdth: clean up host private data [SCSI] gdth: Remove virt hosts [SCSI] gdth: Reorder scsi_host_template intitializers [SCSI] gdth: kill gdth_{read,write}[bwl] wrappers [SCSI] gdth: Remove 2.4.x support, in-kernel changelog [SCSI] gdth: split out pci probing [SCSI] gdth: split out eisa probing [SCSI] gdth: split out isa probing gdth: Make one abuse of scsi_cmnd less obvious [SCSI] NCR5380: Use scsi_eh API for REQUEST_SENSE invocation [SCSI] usb storage: use scsi_eh API in REQUEST_SENSE execution [SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE ...
2007-10-12Driver core: change add_uevent_var to use a structKay Sievers
This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12[SCSI] transport_srp: add rport roles attributeFUJITA Tomonori
This adds a 'roles' attribute to rport like transport_fc. The role can be initiator or target. That is, the initiator driver creates target remote ports and the target driver creates initiator remote ports. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] ib_srp: convert to use the srp transport classFUJITA Tomonori
This converts ib_srp to use the srp transport class. I don't have ib hardware so I've not tested this patch. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (87 commits) mlx4_core: Fix section mismatches IPoIB: Allow setting policy to ignore multicast groups IB/mthca: Mark error paths as unlikely() in post_srq_recv functions IB/ipath: Minor fix to ordering of freeing and zeroing of tid pages. IB/ipath: Remove redundant link state checks IB/ipath: Fix IB_EVENT_PORT_ERR event IB/ipath: Better handling of unexpected GPIO interrupts IB/ipath: Maintain active time on all chips IB/ipath: Fix QHT7040 serial number check IB/ipath: Indicate a couple of chip bugs to userspace IB/ipath: iba6110 rev4 no longer needs recv header overrun workaround IB/ipath: Use counters in ipath_poll and cleanup interrupts in ipath_close IB/ipath: Remove duplicate copy of LMC IB/ipath: Add ability to set the LMC via the sysfs debugging interface IB/ipath: Optimize completion queue entry insertion and polling IB/ipath: Implement IB_EVENT_QP_LAST_WQE_REACHED IB/ipath: Generate flush CQE when QP is in error state IB/ipath: Remove redundant code IB/ipath: Future proof eeprom checksum code (contents reading) IB/ipath: UC RDMA WRITE with IMMEDIATE doesn't send the immediate ...
2007-10-10[INET]: local port range robustnessStephen Hemminger
Expansion of original idea from Denis V. Lunev <den@openvz.org> Add robustness and locking to the local_port_range sysctl. 1. Enforce that low < high when setting. 2. Use seqlock to ensure atomic update. The locking might seem like overkill, but there are cases where sysadmin might want to change value in the middle of a DoS attack. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10IPoIB: Fix unused variable warningRoland Dreier
The conversion to use netdevice internal stats left an unused variable in ipoib_neigh_free(), since there's no longer any reason to get netdev_priv() in order to increment dropped packets. Delete the unused priv variable. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[IPoIB]: Convert to netdevice internal statsRoland Dreier
Use the stats member of struct netdevice in IPoIB, so we can save memory by deleting the stats member of struct ipoib_dev_priv, and save code by deleting ipoib_get_stats(). Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Move hardware header operations out of netdevice.Stephen Hemminger
Since hardware header operations are part of the protocol class not the device instance, make them into a separate object and save memory. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle
It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Make the device list and device lookups per namespace.Eric W. Biederman
This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Make NAPI polling independent of struct net_device objects.Stephen Hemminger
Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10IPoIB: Allow setting policy to ignore multicast groupsOr Gerlitz
The kernel IB stack allows (through the RDMA CM) userspace applications to join and use multicast groups from the IPoIB MGID range. This allows multicast traffic to be handled directly from userspace QPs, without going through the kernel stack, which gives better performance for some applications. However, to fully interoperate with IP multicast, such userspace applications need to participate in IGMP reports and queries, or else routers may not forward the multicast traffic to the system where the application is running. The simplest way to do this is to share the kernel IGMP implementation by using the IP_ADD_MEMBERSHIP option to join multicast groups that are being handled directly in userspace. However, in such cases, the actual multicast traffic should not also be handled by the IPoIB interface, because that would burn resources handling multicast packets that will just be discarded in the kernel. To handle this, this patch adds lookup on the database used for IB multicast group reference counting when IPoIB is joining multicast groups, and if a multicast group is already handled by user space, then the IPoIB kernel driver ignores the group. This is controlled by a per-interface policy flag. When the flag is set, IPoIB will not join and attach its QP to a multicast group which already has an entry in the database; when the flag is cleared, IPoIB will behave as before this change. For each IPoIB interface, the /sys/class/net/$intf/umcast attribute controls the policy flag. The default value is off/0. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-10IB/mthca: Mark error paths as unlikely() in post_srq_recv functionsEli Cohen
Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/ipath: Minor fix to ordering of freeing and zeroing of tid pages.Dave Olson
Fixed to be the same as everywhere else. copy and then zero the page * in the array first, and then pass the copy to the VM routines. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/ipath: Remove redundant link state checksRalph Campbell
This patch removes some redundant checks when the SMA changes the link state since the same checks are made in the lower level function that sets the state. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/ipath: Fix IB_EVENT_PORT_ERR eventRalph Campbell
The link state event calls were being generated when the SM told the SMA to change link states. This works for IB_EVENT_PORT_ACTIVE but not if the link goes down and stays down. The fix is to generate event calls from the interrupt handler when the HW link state changes. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/ipath: Better handling of unexpected GPIO interruptsMichael Albaugh
The General Purpose I/O pins can be configured to cause interrupts. At the end of the interrupt code dealing with all known causes, a message is output if any bits remain un-handled. Since this is a "can't happen" scenario, it should only be triggered by bugs elsewhere. It is harmless, and potentially beneficial, to limit the damage by masking any such unexpected interrupts. This patch adds disabling of interrupts from any pins that should not have been allowed to interrupt, in addition to emitting a message. Signed-off-by: Michael Albaugh <Michael.Albaugh@Qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/ipath: Maintain active time on all chipsMichael Albaugh
There is a count of "active hours" maintained in EEPROM, to aid troubleshooting. The definition of "active" is based on traffic exceeding a threshold in any given 5-second polling interval. As originally written, the check was inadvertently bypassed for chips whose counters were 64-bits wide, and only applied to chips with 32-bit wide counters. This patch moves the test for amount of traffic "out" to a more common location, rather than depending on a side-effect of the software emulation of 64-bit counts on chips whose hardware is only 32-bits wide. Signed-off-by: Michael Albaugh <Michael.Albaugh@Qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/ipath: Fix QHT7040 serial number checkDave Olson
Remove all the OEM and bringup boards, and complain and fail initialization if one is found. QHT7040 with GPIO rework (128ywwuuuu) is OK, older 112ywwuuuu is no longer supported). The check that had been added was failing both the 112 and 128 series. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>