| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
|
|
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, target, tcmu,
smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx).
The major core change is using a sbitmap instead of an atomic for
queue tracking"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (412 commits)
scsi: target: tcm_fc: Fix a kernel-doc header
scsi: target: Shorten ALUA error messages
scsi: target: Fix two format specifiers
scsi: target: Compare explicitly with SAM_STAT_GOOD
scsi: sd: Introduce a new local variable in sd_check_events()
scsi: dc395x: Open-code status_byte(u8) calls
scsi: 53c700: Open-code status_byte(u8) calls
scsi: smartpqi: Remove unused functions
scsi: qla4xxx: Remove an unused function
scsi: myrs: Remove unused functions
scsi: myrb: Remove unused functions
scsi: mpt3sas: Fix two kernel-doc headers
scsi: fcoe: Suppress a compiler warning
scsi: libfc: Fix a format specifier
scsi: aacraid: Remove an unused function
scsi: core: Introduce enum scsi_disposition
scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case
scsi: core: Rename scsi_softirq_done() into scsi_complete()
scsi: core: Remove an incorrect comment
scsi: core: Make the scsi_alloc_sgtables() documentation more accurate
...
|
|
Pull block driver updates from Jens Axboe:
- MD changes via Song:
- raid5 POWER fix
- raid1 failure fix
- UAF fix for md cluster
- mddev_find_or_alloc() clean up
- Fix NULL pointer deref with external bitmap
- Performance improvement for raid10 discard requests
- Fix missing information of /proc/mdstat
- rsxx const qualifier removal (Arnd)
- Expose allocated brd pages (Calvin)
- rnbd via Gioh Kim:
- Change maintainer
- Change domain address of maintainers' email
- Add polling IO mode and document update
- Fix memory leak and some bug detected by static code analysis
tools
- Code refactoring
- Series of floppy cleanups/fixes (Denis)
- s390 dasd fixes (Julian)
- kerneldoc fixes (Lee)
- null_blk double free (Lv)
- null_blk virtual boundary addition (Max)
- Remove xsysace driver (Michal)
- umem driver removal (Davidlohr)
- ataflop fixes (Dan)
- Revalidate disk removal (Christoph)
- Bounce buffer cleanups (Christoph)
- Mark lightnvm as deprecated (Christoph)
- mtip32xx init cleanups (Shixin)
- Various fixes (Tian, Gustavo, Coly, Yang, Zhang, Zhiqiang)
* tag 'for-5.13/drivers-2021-04-27' of git://git.kernel.dk/linux-block: (143 commits)
async_xor: increase src_offs when dropping destination page
drivers/block/null_blk/main: Fix a double free in null_init.
md/raid1: properly indicate failure when ending a failed write request
md-cluster: fix use-after-free issue when removing rdev
nvme: introduce generic per-namespace chardev
nvme: cleanup nvme_configure_apst
nvme: do not try to reconfigure APST when the controller is not live
nvme: add 'kato' sysfs attribute
nvme: sanitize KATO setting
nvmet: avoid queuing keep-alive timer if it is disabled
brd: expose number of allocated pages in debugfs
ataflop: fix off by one in ataflop_probe()
ataflop: potential out of bounds in do_format()
drbd: Fix fall-through warnings for Clang
block/rnbd: Use strscpy instead of strlcpy
block/rnbd-clt-sysfs: Remove copy buffer overlap in rnbd_clt_get_path_name
block/rnbd-clt: Remove max_segment_size
block/rnbd-clt: Generate kobject_uevent when the rnbd device state changes
block/rnbd-srv: Remove unused arguments of rnbd_srv_rdma_ev
Documentation/ABI/rnbd-clt: Add description for nr_poll_queues
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull CFI on arm64 support from Kees Cook:
"This builds on last cycle's LTO work, and allows the arm64 kernels to
be built with Clang's Control Flow Integrity feature. This feature has
happily lived in Android kernels for almost 3 years[1], so I'm excited
to have it ready for upstream.
The wide diffstat is mainly due to the treewide fixing of mismatched
list_sort prototypes. Other things in core kernel are to address
various CFI corner cases. The largest code portion is the CFI runtime
implementation itself (which will be shared by all architectures
implementing support for CFI). The arm64 pieces are Acked by arm64
maintainers rather than coming through the arm64 tree since carrying
this tree over there was going to be awkward.
CFI support for x86 is still under development, but is pretty close.
There are a handful of corner cases on x86 that need some improvements
to Clang and objtool, but otherwise works well.
Summary:
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)"
* tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arm64: allow CONFIG_CFI_CLANG to be selected
KVM: arm64: Disable CFI for nVHE
arm64: ftrace: use function_nocfi for ftrace_call
arm64: add __nocfi to __apply_alternatives
arm64: add __nocfi to functions that jump to a physical address
arm64: use function_nocfi with __pa_symbol
arm64: implement function_nocfi
psci: use function_nocfi for cpu_resume
lkdtm: use function_nocfi
treewide: Change list_sort to use const pointers
bpf: disable CFI in dispatcher functions
kallsyms: strip ThinLTO hashes from static functions
kthread: use WARN_ON_FUNCTION_MISMATCH
workqueue: use WARN_ON_FUNCTION_MISMATCH
module: ensure __cfi_check alignment
mm: add generic function_nocfi macro
cfi: add __cficanonical
add support for Clang CFI
|
|
We always map with SZ_4K, so do not need max_segment_size.
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20210419073722.15351-18-gi-oh.kim@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
struct rtrs_srv is not used when handling rnbd_srv_rdma_ev messages, so
cleaned up
rdma_ev function pointer in rtrs_srv_ops also is changed.
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Aleksei Marov <aleksei.marov@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20210419073722.15351-16-gi-oh.kim@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
RNBD can make double-queues for irq-mode and poll-mode.
For example, on 4-CPU system 8 request-queues are created,
4 for irq-mode and 4 for poll-mode.
If the IO has HIPRI flag, the block-layer will call .poll function
of RNBD. Then IO is sent to the poll-mode queue.
Add optional nr_poll_queues argument for map_devices interface.
To support polling of RNBD, RTRS client creates connections
for both of irq-mode and direct-poll-mode.
For example, on 4-CPU system it could've create 5 connections:
con[0] => user message (softirq cq)
con[1:4] => softirq cq
After this patch, it can create 9 connections:
con[0] => user message (softirq cq)
con[1:4] => softirq cq
con[5:8] => DIRECT-POLL cq
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20210419073722.15351-14-gi-oh.kim@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
They are defined with the same value and similar meaning, let's remove
one of them, then we can remove {WAIT,NOWAIT}.
Also change the type of 'wait' from 'int' to 'enum wait_type' to make
it clear.
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Guoqing Jiang <guoqing.jiang@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20210419073722.15351-9-gi-oh.kim@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
mlx5-next 2021-04-09
This pr contains changes from mlx5-next branch,
already reviewed on netdev and rdma mailing lists, links below.
1) From Leon, Dynamically assign MSI-X vectors count
Already Acked by Bjorn Helgaas.
https://patchwork.kernel.org/project/netdevbpf/cover/20210314124256.70253-1-leon@kernel.org/
2) Cleanup series:
https://patchwork.kernel.org/project/netdevbpf/cover/20210311070915.321814-1-saeed@kernel.org/
From Mark, E-Switch cleanups and refactoring, and the addition
of single FDB mode needed HW bits.
From Mikhael, Remove unused struct field
From Saeed, Cleanup W=1 prototype warning
From Zheng, Esw related cleanup
From Tariq, User order-0 page allocation for EQs
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Implement sriov_get_vf_total_msix/count() callbacks
net/mlx5: Dynamically assign MSI-X vectors count
net/mlx5: Add dynamic MSI-X capabilities bits
PCI/IOV: Add sysfs MSI-X vector assignment interface
net/mlx5: Use order-0 allocations for EQs
net/mlx5: Add IFC bits needed for single FDB mode
net/mlx5: E-Switch, Refactor send to vport to be more generic
RDMA/mlx5: Use representor E-Switch when getting netdev and metadata
net/mlx5: E-Switch, Add eswitch pointer to each representor
net/mlx5: E-Switch, Add match on vhca id to default send rules
net/mlx5: Remove unused mlx5_core_health member recover_work
net/mlx5: simplify the return expression of mlx5_esw_offloads_pair()
net/mlx5: Cleanup prototype warning
====================
Link: https://lore.kernel.org/r/20210409200704.10886-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
list_sort() internally casts the comparison function passed to it
to a different type with constant struct list_head pointers, and
uses this pointer to call the functions, which trips indirect call
Control-Flow Integrity (CFI) checking.
Instead of removing the consts, this change defines the
list_cmp_func_t type and changes the comparison function types of
all list_sort() callers to use const pointers, thus avoiding type
mismatches.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
|
|
The nla_len() is less than or equal to 16. If it's less than 16 then end
of the "gid" buffer is uninitialized.
Fixes: ae43f8286730 ("IB/core: Add IP to GID netlink offload")
Link: https://lore.kernel.org/r/20210405074434.264221-1-leon@kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
As INI QP does not require a recv_cq, avoid the following null pointer
dereference by checking if the qp_type is not INI before trying to extract
the recv_cq.
BUG: kernel NULL pointer dereference, address: 00000000000000e0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 54250 Comm: mpitests-IMB-MP Not tainted 5.12.0-rc5 #1
Hardware name: Dell Inc. PowerEdge R320/0KM5PX, BIOS 2.7.0 08/19/2019
RIP: 0010:qedr_create_qp+0x378/0x820 [qedr]
Code: 02 00 00 50 e8 29 d4 a9 d1 48 83 c4 18 e9 65 fe ff ff 48 8b 53 10 48 8b 43 18 44 8b 82 e0 00 00 00 45 85 c0 0f 84 10 74 00 00 <8b> b8 e0 00 00 00 85 ff 0f 85 50 fd ff ff e9 fd 73 00 00 48 8d bd
RSP: 0018:ffff9c8f056f7a70 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff9c8f056f7b58 RCX: 0000000000000009
RDX: ffff8c41a9744c00 RSI: ffff9c8f056f7b58 RDI: ffff8c41c0dfa280
RBP: ffff8c41c0dfa280 R08: 0000000000000002 R09: 0000000000000001
R10: 0000000000000000 R11: ffff8c41e06fc608 R12: ffff8c4194052000
R13: 0000000000000000 R14: ffff8c4191546070 R15: ffff8c41c0dfa280
FS: 00007f78b2787b80(0000) GS:ffff8c43a3200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000e0 CR3: 00000001011d6002 CR4: 00000000001706f0
Call Trace:
ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x4e4/0xb90 [ib_uverbs]
? ib_uverbs_cq_event_handler+0x30/0x30 [ib_uverbs]
ib_uverbs_run_method+0x6f6/0x7a0 [ib_uverbs]
? ib_uverbs_handler_UVERBS_METHOD_QP_DESTROY+0x70/0x70 [ib_uverbs]
? __cond_resched+0x15/0x30
? __kmalloc+0x5a/0x440
ib_uverbs_cmd_verbs+0x195/0x360 [ib_uverbs]
? xa_load+0x6e/0x90
? cred_has_capability+0x7c/0x130
? avc_has_extended_perms+0x17f/0x440
? vma_link+0xae/0xb0
? vma_set_page_prot+0x2a/0x60
? mmap_region+0x298/0x6c0
? do_mmap+0x373/0x520
? selinux_file_ioctl+0x17f/0x220
ib_uverbs_ioctl+0xa7/0x110 [ib_uverbs]
__x64_sys_ioctl+0x84/0xc0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f78b120262b
Fixes: 06e8d1df46ed ("RDMA/qedr: Add support for user mode XRC-SRQ's")
Link: https://lore.kernel.org/r/20210404125501.154789-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
A panic can result when AIP is enabled:
BUG: unable to handle kernel NULL pointer dereference at 000000000000000
PGD 0 P4D 0
Oops: 0000 1 SMP PTI
CPU: 70 PID: 981 Comm: systemd-udevd Tainted: G OE --------- - - 4.18.0-240.el8.x86_64 #1
Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.01.01.0005.101720141054 10/17/2014
RIP: 0010:__bitmap_and+0x1b/0x70
RSP: 0018:ffff99aa0845f9f0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8d5a6fc18000 RCX: 0000000000000048
RDX: 0000000000000000 RSI: ffffffffc06336f0 RDI: ffff8d5a8fa67750
RBP: 0000000000000079 R08: 0000000fffffffff R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffffffffc06336f0
R13: 00000000000000a0 R14: ffff8d5a6fc18000 R15: 0000000000000003
FS: 00007fec137a5980(0000) GS:ffff8d5a9fa80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000a04b48002 CR4: 00000000001606e0
Call Trace:
hfi1_num_netdev_contexts+0x7c/0x110 [hfi1]
hfi1_init_dd+0xd7f/0x1a90 [hfi1]
? pci_bus_read_config_dword+0x49/0x70
? pci_mmcfg_read+0x3e/0xe0
do_init_one.isra.18+0x336/0x640 [hfi1]
local_pci_probe+0x41/0x90
pci_device_probe+0x105/0x1c0
really_probe+0x212/0x440
driver_probe_device+0x49/0xc0
device_driver_attach+0x50/0x60
__driver_attach+0x61/0x130
? device_driver_attach+0x60/0x60
bus_for_each_dev+0x77/0xc0
? klist_add_tail+0x3b/0x70
bus_add_driver+0x14d/0x1e0
? dev_init+0x10b/0x10b [hfi1]
driver_register+0x6b/0xb0
? dev_init+0x10b/0x10b [hfi1]
hfi1_mod_init+0x1e6/0x20a [hfi1]
do_one_initcall+0x46/0x1c3
? free_unref_page_commit+0x91/0x100
? _cond_resched+0x15/0x30
? kmem_cache_alloc_trace+0x140/0x1c0
do_init_module+0x5a/0x220
load_module+0x14b4/0x17e0
? __do_sys_finit_module+0xa8/0x110
__do_sys_finit_module+0xa8/0x110
do_syscall_64+0x5b/0x1a0
The issue happens when pcibus_to_node() returns NO_NUMA_NODE.
Fix this issue by moving the initialization of dd->node to hfi1_devdata
allocation and remove the other pcibus_to_node() calls in the probe path
and use dd->node instead.
Affinity logic is adjusted to use a new field dd->affinity_entry as a
guard instead of dd->node.
Fixes: 4730f4a6c6b2 ("IB/hfi1: Activate the dummy netdev")
Link: https://lore.kernel.org/r/1617025700-31865-4-git-send-email-dennis.dalessandro@cornelisnetworks.com
Cc: stable@vger.kernel.org
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
ipv6 bit is wrongly set by the below which causes fatal adapter lookup
engine errors for ipv4 connections while destroying a listener. Fix it to
properly check the local address for ipv6.
Fixes: 3408be145a5d ("RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server")
Link: https://lore.kernel.org/r/20210331135715.30072-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
KASAN detected the following BUG:
BUG: KASAN: use-after-free in rtrs_clt_update_wc_stats+0x41/0x100 [rtrs_client]
Read of size 8 at addr ffff88bf2fb4adc0 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 5.4.84-pserver #5.4.84-1+feature+linux+5.4.y+dbg+20201216.1319+b6b887b~deb10
Hardware name: Supermicro H8QG6/H8QG6, BIOS 3.00 09/04/2012
Call Trace:
<IRQ>
dump_stack+0x96/0xe0
print_address_description.constprop.4+0x1f/0x300
? irq_work_claim+0x2e/0x50
__kasan_report.cold.8+0x78/0x92
? rtrs_clt_update_wc_stats+0x41/0x100 [rtrs_client]
kasan_report+0x10/0x20
rtrs_clt_update_wc_stats+0x41/0x100 [rtrs_client]
rtrs_clt_rdma_done+0xb1/0x760 [rtrs_client]
? lockdep_hardirqs_on+0x1a8/0x290
? process_io_rsp+0xb0/0xb0 [rtrs_client]
? mlx4_ib_destroy_cq+0x100/0x100 [mlx4_ib]
? add_interrupt_randomness+0x1a2/0x340
__ib_process_cq+0x97/0x100 [ib_core]
ib_poll_handler+0x41/0xb0 [ib_core]
irq_poll_softirq+0xe0/0x260
__do_softirq+0x127/0x672
irq_exit+0xd1/0xe0
do_IRQ+0xa3/0x1d0
common_interrupt+0xf/0xf
</IRQ>
RIP: 0010:cpuidle_enter_state+0xea/0x780
Code: 31 ff e8 99 48 47 ff 80 7c 24 08 00 74 12 9c 58 f6 c4 02 0f 85 53 05 00 00 31 ff e8 b0 6f 53 ff e8 ab 4f 5e ff fb 8b 44 24 04 <85> c0 0f 89 f3 01 00 00 48 8d 7b 14 e8 65 1e 77 ff c7 43 14 00 00
RSP: 0018:ffffffffab007d58 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffca
RAX: 0000000000000002 RBX: ffff88b803d69800 RCX: ffffffffa91a8298
RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffffffffab021414
RBP: ffffffffab6329e0 R08: 0000000000000002 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002
R13: 000000bf39d82466 R14: ffffffffab632aa0 R15: ffffffffab632ae0
? lockdep_hardirqs_on+0x1a8/0x290
? cpuidle_enter_state+0xe5/0x780
cpuidle_enter+0x3c/0x60
do_idle+0x2fb/0x390
? arch_cpu_idle_exit+0x40/0x40
? schedule+0x94/0x120
cpu_startup_entry+0x19/0x1b
start_kernel+0x5da/0x61b
? thread_stack_cache_init+0x6/0x6
? load_ucode_amd_bsp+0x6f/0xc4
? init_amd_microcode+0xa6/0xa6
? x86_family+0x5/0x20
? load_ucode_bsp+0x182/0x1fd
secondary_startup_64+0xa4/0xb0
Allocated by task 5730:
save_stack+0x19/0x80
__kasan_kmalloc.constprop.9+0xc1/0xd0
kmem_cache_alloc_trace+0x15b/0x350
alloc_sess+0xf4/0x570 [rtrs_client]
rtrs_clt_open+0x3b4/0x780 [rtrs_client]
find_and_get_or_create_sess+0x649/0x9d0 [rnbd_client]
rnbd_clt_map_device+0xd7/0xf50 [rnbd_client]
rnbd_clt_map_device_store+0x4ee/0x970 [rnbd_client]
kernfs_fop_write+0x141/0x240
vfs_write+0xf3/0x280
ksys_write+0xba/0x150
do_syscall_64+0x68/0x270
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 5822:
save_stack+0x19/0x80
__kasan_slab_free+0x125/0x170
kfree+0xe7/0x3f0
kobject_put+0xd3/0x240
rtrs_clt_destroy_sess_files+0x3f/0x60 [rtrs_client]
rtrs_clt_close+0x3c/0x80 [rtrs_client]
close_rtrs+0x45/0x80 [rnbd_client]
rnbd_client_exit+0x10f/0x2bd [rnbd_client]
__x64_sys_delete_module+0x27b/0x340
do_syscall_64+0x68/0x270
entry_SYSCALL_64_after_hwframe+0x49/0xbe
When rtrs_clt_close is triggered, it iterates over all the present
rtrs_clt_sess and triggers close on them. However, the call to
rtrs_clt_destroy_sess_files is done before the rtrs_clt_close_conns. This
is incorrect since during the initialization phase we allocate
rtrs_clt_sess first, and then we go ahead and create rtrs_clt_con for it.
If we free the rtrs_clt_sess structure before closing the rtrs_clt_con, it
may so happen that an inflight IO completion would trigger the function
rtrs_clt_rdma_done, which would lead to the above UAF case.
Hence close the rtrs_clt_con connections first, and then trigger the
destruction of session files.
Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20210325153308.1214057-12-gi-oh.kim@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Pull rdma fixes from Jason Gunthorpe:
"Not much going on, just some small bug fixes:
- Typo causing a regression in mlx5 devx
- Regression in the recent hns rework causing the HW to get out of
sync
- Long-standing cxgb4 adaptor crash when destroying cm ids"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server
RDMA/hns: Fix bug during CMDQ initialization
RDMA/mlx5: Fix typo in destroy_mkey inbox
|
|
Not setting the ipv6 bit while destroying ipv6 listening servers may
result in potential fatal adapter errors due to lookup engine memory hash
errors. Therefore always set ipv6 field while destroying ipv6 listening
servers.
Fixes: 830662f6f032 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address")
Link: https://lore.kernel.org/r/20210324190453.8171-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When reloading driver, the head/tail pointer of CMDQ may be not at
position 0. Then during initialization of CMDQ, if head is reset first,
the firmware will start to handle CMDQ because the head is not equal to
the tail. The driver can reset tail first since the firmware will be
triggerred only by head. This bug is introduced by changing macros of
head/tail register without changing the order of initialization.
Fixes: 292b3352bd5b ("RDMA/hns: Adjust fields and variables about CMDQ tail/head")
Link: https://lore.kernel.org/r/1615602611-7963-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Now that each representor stores a pointer to the managing E-Switch
use that information when creating the send-to-vport rules.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Now that a pointer to the managing E-Switch is stored in the representor
use it.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Set mkey_index to the correct place when preparing the destroy_mkey inbox,
this will fix the following syndrome:
mlx5_core 0000:08:00.0: mlx5_cmd_check:782:(pid 980716): DEALLOC_PD(0x801)
op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x31b635)
Link: https://lore.kernel.org/r/20210311142024.1282004-1-leon@kernel.org
Fixes: 1368ead04c36 ("RDMA/mlx5: Use strict get/set operations for obj_id")
Reviewed-by: Ido Kalir <idok@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
1. Don't set the ts_format bit to default when it reserved - device is
running in the old mode (free running).
2. XRC doesn't have a CQ therefore the ts format in the QP
context should be default / free running.
3. Set ts_format to WQ.
Fixes: 2fe8d4b87802 ("RDMA/mlx5: Fail QP creation if the device can not support the CQE TS")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In rxe_comp.c in rxe_completer() the function free_pkt() did not clear skb
which triggered a warning at 'done:' and could possibly at 'exit:'. The
WARN_ONCE() calls are not actually needed. The call to free_pkt() is
moved to the end to clearly show that all skbs are freed.
Fixes: 899aba891cab ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
rxe_rcv_mcast_pkt() dropped a reference to ib_device when no error
occurred causing an underflow on the reference counter. This code is
cleaned up to be clearer and easier to read.
Fixes: 899aba891cab ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When the noted patch below extending the reference taken by
rxe_get_dev_from_net() in rxe_udp_encap_recv() until each skb is freed it
was not matched by a reference in the loopback path resulting in
underflows.
Fixes: 899aba891cab ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
tcm_loop could be used like a normal block device, so we can't use
GFP_KERNEL and should use GFP_NOIO. This adds a gfp_t arg to
target_cmd_init_cdb() and converts the users. For every driver but loop
GFP_KERNEL is kept.
This will also be useful in subsequent patches where loop needs to do
target_submit_prep() from interrupt context to get a ref to the se_device,
and so it will need to use GFP_ATOMIC.
Link: https://lore.kernel.org/r/20210227170006.5077-16-michael.christie@oracle.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
target_submit_cmd_map_sgls() is being removed, so convert srpt to the new
submission API.
srpt uses target_stop_session() to sync session shutdown with LIO core, so
we use target_init_cmd()/target_submit_prep()/target_submit(), because
target_init_cmd() will detect the target_stop_session() call and return an
error.
Link: https://lore.kernel.org/r/20210227170006.5077-6-michael.christie@oracle.com
Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix the following W=1 compilation warning:
drivers/infiniband/core/uverbs_ioctl.c:108: warning: expecting prototype for uverbs_alloc(). Prototype was for _uverbs_alloc() instead
Fixes: 461bb2eee4e1 ("IB/uverbs: Add a simple allocator to uverbs_attr_bundle")
Link: https://lore.kernel.org/r/20210302074214.1054299-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The W=1 allmodconfig build produces the following warning:
drivers/infiniband/hw/mlx5/odp.c:1086: warning: wrong kernel-doc identifier on line:
* Parse a series of data segments for page fault handling.
Fix it by changing /** to be /* as it is written in kernel-doc
documentation.
Fixes: 5e769e444d26 ("RDMA/hw/mlx5/odp: Fix formatting and add missing descriptions in 'pagefault_data_segments()'")
Link: https://lore.kernel.org/r/20210302074214.1054299-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Set err to -ENOMEM if kzalloc fails instead of 0.
Fixes: 759738537142 ("IB/mlx5: Enable subscription for device events over DEVX")
Link: https://lore.kernel.org/r/20210222122343.19720-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When RDMA_RXE is enabled and CRYPTO is disabled, Kbuild gives the
following warning:
WARNING: unmet direct dependencies detected for CRYPTO_CRC32
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- RDMA_RXE [=y] && (INFINIBAND_USER_ACCESS [=y] || !INFINIBAND_USER_ACCESS [=y]) && INET [=y] && PCI [=y] && INFINIBAND [=y] && INFINIBAND_VIRT_DMA [=y]
This is because RDMA_RXE selects CRYPTO_CRC32, without depending on or
selecting CRYPTO, despite that config option being subordinate to CRYPTO.
Fixes: cee2688e3cd6 ("IB/rxe: Offload CRC calculation when possible")
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Link: https://lore.kernel.org/r/21525878.NYvzQUHefP@ubuntu-mate-laptop
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
ib_send_cm_sidr_rep() {
spin_lock_irqsave()
cm_send_sidr_rep_locked() {
...
spin_lock_irq()
....
spin_unlock_irq() <--- this will enable interrupts
}
spin_unlock_irqrestore()
}
spin_unlock_irqrestore() expects interrupts to be disabled but the
internal spin_unlock_irq() will always enable hard interrupts.
Fix this by replacing the internal spin_{lock,unlock}_irq() with
irqsave/restore variants.
It fixes the following kernel trace:
raw_local_irq_restore() called with IRQs enabled
WARNING: CPU: 2 PID: 20001 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x1d/0x20
Call Trace:
_raw_spin_unlock_irqrestore+0x4e/0x50
ib_send_cm_sidr_rep+0x3a/0x50 [ib_cm]
cma_send_sidr_rep+0xa1/0x160 [rdma_cm]
rdma_accept+0x25e/0x350 [rdma_cm]
ucma_accept+0x132/0x1cc [rdma_ucm]
ucma_write+0xbf/0x140 [rdma_ucm]
vfs_write+0xc1/0x340
ksys_write+0xb3/0xe0
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 87c4c774cbef ("RDMA/cm: Protect access to remote_sidr_table")
Link: https://lore.kernel.org/r/20210301081844.445823-1-leon@kernel.org
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Linux 5.11
Merged to resolve conflicts with RDMA rc commits
- drivers/infiniband/sw/rxe/rxe_net.c
The final logic is to call rxe_get_dev_from_net() again with the master
netdev if the packet was rx'd on a vlan. To keep the elimination of the
local variables requires a trivial edit to the code in -rc
Link: https://lore.kernel.org/r/20210210131542.215ea67c@canb.auug.org.au
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
smatch gives the warning:
drivers/infiniband/ulp/rtrs/rtrs-srv.c:1805 rtrs_rdma_connect() warn: passing zero to 'PTR_ERR'
Which is trying to say smatch has shown that srv is not an error pointer
and thus cannot be passed to PTR_ERR.
The solution is to move the list_add() down after full initilization of
rtrs_srv. To avoid holding the srv_mutex too long, only hold it during the
list operation as suggested by Leon.
Fixes: 03e9b33a0fd6 ("RDMA/rtrs: Only allow addition of path to an already established session")
Link: https://lore.kernel.org/r/20210216143807.65923-1-jinpu.wang@cloud.ionos.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The current code computes a number of channels per SRP target and spreads
them equally across all online NUMA nodes. Each channel is then assigned
a CPU within this node.
In the case of unbalanced, or even unpopulated nodes, some channels do not
get a CPU associated and thus do not get connected. This causes the SRP
connection to fail.
This patch solves the issue by rewriting channel computation and
allocation:
- Drop channel to node/CPU association as it had no real effect on
locality but added unnecessary complexity.
- Tweak the number of channels allocated to reduce CPU contention when
possible:
- Up to one channel per CPU (instead of up to 4 by node)
- At least 4 channels per node, unless ch_count module parameter is
used.
Link: https://lore.kernel.org/r/9cb4d9d3-30ad-2276-7eff-e85f7ddfb411@suse.com
Signed-off-by: Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Leon Romanovsky says:
====================
Add an extra timestamp format for mlx5_ib device.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* branch 'mlx5_timestamp':
RDMA/mlx5: Fail QP creation if the device can not support the CQE TS
net/mlx5: Add new timestamp mode bits
|
|
In ConnectX6Dx device, HW can work in real time timestamp mode according
to the device capabilities per RQ/SQ/QP.
When the flag IB_UVERBS_CQ_FLAGS_TIMESTAMP_COMPLETION is set, the user
expect to get TS on the CQEs in free running format, so we need to fail
the QP creation if the current mode of the device doesn't support it.
Link: https://lore.kernel.org/r/20210209131107.698833-3-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The traditional DevX CQ creation flow goes through mlx5_core_create_cq()
which checks that the given EQN corresponds to an existing EQ and attaches
a devx handler to the EQN for the CQ.
In some cases the EQ will not be a kernel EQ, but will be controlled by
modify CQ, don't block creating these just because the EQN can't be found
in the kernel.
Link: https://lore.kernel.org/r/20210211085549.1277674-1-leon@kernel.org
Signed-off-by: Tal Gilboa <talgi@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
put_device() decreases the ref-count and then the device will be
cleaned-up, while at is also add missing put_device in
rtrs_srv_create_once_sysfs_root_folders
This patch solves a kmemleak error as below:
unreferenced object 0xffff88809a7a0710 (size 8):
comm "kworker/4:1H", pid 113, jiffies 4295833049 (age 6212.380s)
hex dump (first 8 bytes):
62 6c 61 00 6b 6b 6b a5 bla.kkk.
backtrace:
[<0000000054413611>] kstrdup+0x2e/0x60
[<0000000078e3120a>] kobject_set_name_vargs+0x2f/0xb0
[<00000000f1a17a6b>] dev_set_name+0xab/0xe0
[<00000000d5502e32>] rtrs_srv_create_sess_files+0x2fb/0x314 [rtrs_server]
[<00000000ed11a1ef>] rtrs_srv_info_req_done+0x631/0x800 [rtrs_server]
[<000000008fc5aa8f>] __ib_process_cq+0x94/0x100 [ib_core]
[<00000000a9599cb4>] ib_cq_poll_work+0x32/0xc0 [ib_core]
[<00000000cfc376be>] process_one_work+0x4bc/0x980
[<0000000016e5c96a>] worker_thread+0x78/0x5c0
[<00000000c20b8be0>] kthread+0x191/0x1e0
[<000000006c9c0003>] ret_from_fork+0x3a/0x50
Fixes: baa5b28b7a47 ("RDMA/rtrs-srv: Replace device_register with device_initialize and device_add")
Link: https://lore.kernel.org/r/20210212134525.103456-5-jinpu.wang@cloud.ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
kmemleak reported an error as below:
unreferenced object 0xffff8880674b7640 (size 64):
comm "kworker/4:1H", pid 113, jiffies 4296403507 (age 507.840s)
hex dump (first 32 bytes):
69 70 3a 31 39 32 2e 31 36 38 2e 31 32 32 2e 31 ip:192.168.122.1
31 30 40 69 70 3a 31 39 32 2e 31 36 38 2e 31 32 10@ip:192.168.12
backtrace:
[<0000000054413611>] kstrdup+0x2e/0x60
[<0000000078e3120a>] kobject_set_name_vargs+0x2f/0xb0
[<00000000ca2be3ee>] kobject_init_and_add+0xb0/0x120
[<0000000062ba5e78>] rtrs_srv_create_sess_files+0x14c/0x314 [rtrs_server]
[<00000000b45b7217>] rtrs_srv_info_req_done+0x5b1/0x800 [rtrs_server]
[<000000008fc5aa8f>] __ib_process_cq+0x94/0x100 [ib_core]
[<00000000a9599cb4>] ib_cq_poll_work+0x32/0xc0 [ib_core]
[<00000000cfc376be>] process_one_work+0x4bc/0x980
[<0000000016e5c96a>] worker_thread+0x78/0x5c0
[<00000000c20b8be0>] kthread+0x191/0x1e0
[<000000006c9c0003>] ret_from_fork+0x3a/0x50
It is caused by the not-freed kobject of rtrs_srv_sess. The kobject
embedded in rtrs_srv_sess has ref-counter 2 after calling
process_info_req(). Therefore it must call kobject_put twice. Currently
it calls kobject_put only once at rtrs_srv_destroy_sess_files because
kobject_del removes the state_in_sysfs flag and then kobject_put in
free_sess() is not called.
This patch moves kobject_del() into free_sess() so that the kobject of
rtrs_srv_sess can be freed. And also this patch adds the missing call of
sysfs_remove_group() to clean-up the sysfs directory.
Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20210212134525.103456-4-jinpu.wang@cloud.ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
While adding a path from the client side to an already established
session, it was possible to provide the destination IP to a different
server. This is dangerous.
This commit adds an extra member to the rtrs_msg_conn_req structure, named
first_conn; which is supposed to notify if the connection request is the
first for that session or not.
On the server side, if a session does not exist but the first_conn
received inside the rtrs_msg_conn_req structure is 1, the connection
request is failed. This signifies that the connection request is for an
already existing session, and since the server did not find one, it is an
wrong connection request.
Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20210212134525.103456-3-jinpu.wang@cloud.ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Reviewed-by: Lutz Pogrell <lutz.pogrell@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
BUG: KASAN: stack-out-of-bounds in _mlx4_ib_post_send+0x1bd2/0x2770 [mlx4_ib]
Read of size 4 at addr ffff8880d5a7f980 by task kworker/0:1H/565
CPU: 0 PID: 565 Comm: kworker/0:1H Tainted: G O 5.4.84-storage #5.4.84-1+feature+linux+5.4.y+dbg+20201216.1319+b6b887b~deb10
Hardware name: Supermicro H8QG6/H8QG6, BIOS 3.00 09/04/2012
Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
Call Trace:
dump_stack+0x96/0xe0
print_address_description.constprop.4+0x1f/0x300
? irq_work_claim+0x2e/0x50
__kasan_report.cold.8+0x78/0x92
? _mlx4_ib_post_send+0x1bd2/0x2770 [mlx4_ib]
kasan_report+0x10/0x20
_mlx4_ib_post_send+0x1bd2/0x2770 [mlx4_ib]
? check_chain_key+0x1d7/0x2e0
? _mlx4_ib_post_recv+0x630/0x630 [mlx4_ib]
? lockdep_hardirqs_on+0x1a8/0x290
? stack_depot_save+0x218/0x56e
? do_profile_hits.isra.6.cold.13+0x1d/0x1d
? check_chain_key+0x1d7/0x2e0
? save_stack+0x4d/0x80
? save_stack+0x19/0x80
? __kasan_slab_free+0x125/0x170
? kfree+0xe7/0x3b0
rdma_write_sg+0x5b0/0x950 [rtrs_server]
The problem is when we send imm_wr, the type should be ib_rdma_wr, so hw
driver like mlx4 can do rdma_wr(wr), so fix it by use the ib_rdma_wr as
type for imm_wr.
Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20210212134525.103456-2-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The pkt->offset field is never used except to assign it to 0. But it adds
lots of unneeded code. This patch removes the field and related code. This
causes a measurable improvement in performance.
Link: https://lore.kernel.org/r/20210211210455.3274-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
ucma_process_join() allocates struct ucma_multicast mc and frees it if an
error occurs during its run. Specifically, if an error occurs in
copy_to_user(), a use-after-free might happen in the following scenario:
1. mc struct is allocated.
2. rdma_join_multicast() is called and succeeds. During its run,
cma_iboe_join_multicast() enqueues a work that will later use the
aforementioned mc struct.
3. copy_to_user() is called and fails.
4. mc struct is deallocated.
5. The work that was enqueued by cma_iboe_join_multicast() is run and
calls ucma_create_uevent() which tries to access mc struct (which is
freed by now).
Fix this bug by cancelling the work enqueued by cma_iboe_join_multicast().
Since cma_work_handler() frees struct cma_work, we don't use it in
cma_iboe_join_multicast() so we can safely cancel the work later.
The following syzkaller report revealed it:
BUG: KASAN: use-after-free in ucma_create_uevent+0x2dd/0x;3f0 drivers/infiniband/core/ucma.c:272
Read of size 8 at addr ffff88810b3ad110 by task kworker/u8:1/108
CPU: 1 PID: 108 Comm: kworker/u8:1 Not tainted 5.10.0-rc6+ #257
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: rdma_cm cma_work_handler
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xbe/0xf9 lib/dump_stack.c:118
print_address_description.constprop.0+0x3e/0×60 mm/kasan/report.c:385
__kasan_report mm/kasan/report.c:545 [inline]
kasan_report.cold+0x1f/0×37 mm/kasan/report.c:562
ucma_create_uevent+0x2dd/0×3f0 drivers/infiniband/core/ucma.c:272
ucma_event_handler+0xb7/0×3c0 drivers/infiniband/core/ucma.c:349
cma_cm_event_handler+0x5d/0×1c0 drivers/infiniband/core/cma.c:1977
cma_work_handler+0xfa/0×190 drivers/infiniband/core/cma.c:2718
process_one_work+0x54c/0×930 kernel/workqueue.c:2272
worker_thread+0x82/0×830 kernel/workqueue.c:2418
kthread+0x1ca/0×220 kernel/kthread.c:292
ret_from_fork+0x1f/0×30 arch/x86/entry/entry_64.S:296
Allocated by task 359:
kasan_save_stack+0x1b/0×40 mm/kasan/common.c:48
kasan_set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc mm/kasan/common.c:461 [inline]
__kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:434
kmalloc include/linux/slab.h:552 [inline]
kzalloc include/linux/slab.h:664 [inline]
ucma_process_join+0x16e/0×3f0 drivers/infiniband/core/ucma.c:1453
ucma_join_multicast+0xda/0×140 drivers/infiniband/core/ucma.c:1538
ucma_write+0x1f7/0×280 drivers/infiniband/core/ucma.c:1724
vfs_write fs/read_write.c:603 [inline]
vfs_write+0x191/0×4c0 fs/read_write.c:585
ksys_write+0x1a1/0×1e0 fs/read_write.c:658
do_syscall_64+0x2d/0×40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 359:
kasan_save_stack+0x1b/0×40 mm/kasan/common.c:48
kasan_set_track+0x1c/0×30 mm/kasan/common.c:56
kasan_set_free_info+0x1b/0×30 mm/kasan/generic.c:355
__kasan_slab_free+0x112/0×160 mm/kasan/common.c:422
slab_free_hook mm/slub.c:1544 [inline]
slab_free_freelist_hook mm/slub.c:1577 [inline]
slab_free mm/slub.c:3142 [inline]
kfree+0xb3/0×3e0 mm/slub.c:4124
ucma_process_join+0x22d/0×3f0 drivers/infiniband/core/ucma.c:1497
ucma_join_multicast+0xda/0×140 drivers/infiniband/core/ucma.c:1538
ucma_write+0x1f7/0×280 drivers/infiniband/core/ucma.c:1724
vfs_write fs/read_write.c:603 [inline]
vfs_write+0x191/0×4c0 fs/read_write.c:585
ksys_write+0x1a1/0×1e0 fs/read_write.c:658
do_syscall_64+0x2d/0×40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff88810b3ad100
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 16 bytes inside of
192-byte region [ffff88810b3ad100, ffff88810b3ad1c0)
Fixes: b5de0c60cc30 ("RDMA/cma: Fix use after free race in roce multicast join")
Link: https://lore.kernel.org/r/20210211090517.1278415-1-leon@kernel.org
Reported-by: Amit Matityahu <mitm@nvidia.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
drivers/infiniband/core/device.c:859: warning: Function parameter or member 'dev' not described in 'ib_port_immutable_read'
drivers/infiniband/core/device.c:859: warning: Function parameter or member 'port' not described in 'ib_port_immutable_read'
Fixes: 7416790e2245 ("RDMA/core: Introduce and use API to read port immutable data")
Link: https://lore.kernel.org/r/20210210151421.1108809-1-leon@kernel.org
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix the following coccicheck warning:
./drivers/infiniband/hw/qedr/qedr.h:629:9-10: WARNING: return of 0/1 in
function 'qedr_qp_has_rq' with return type bool.
./drivers/infiniband/hw/qedr/qedr.h:620:9-10: WARNING: return of 0/1 in
function 'qedr_qp_has_sq' with return type bool.
Link: https://lore.kernel.org/r/1612949901-109873-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot<abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
FRMR is not well-supported on HIP08, it is re-designed for HIP09 and the
position of related fields is changed. Then the ULPs should be forbidden
to use FRMR on older hardwares.
Link: https://lore.kernel.org/r/1612924424-28217-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Simplify __hns_roce_cmq_send() then remove the redundant variables.
Link: https://lore.kernel.org/r/1612688143-28226-6-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The register 0x07014 is actually the head pointer of CMDQ, and 0x07010
means tail pointer. Current definitions are confusing, so rename them and
related variables.
The next_to_use of structure hns_roce_v2_cmq_ring has the same semantics
as head, merge them into one member. The next_to_clean of structure
hns_roce_v2_cmq_ring has the same semantics as tail. After deleting
next_to_clean, tail should also be deleted.
Link: https://lore.kernel.org/r/1612688143-28226-5-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
