summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2013-10-14Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband updates from Roland Dreier: "Last batch of IB changes for 3.12: many mlx5 hardware driver fixes plus one trivial semicolon cleanup" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB: Remove unnecessary semicolons IB/mlx5: Ensure proper synchronization accessing memory IB/mlx5: Fix alignment of reg umr gather buffers IB/mlx5: Fix eq names to display nicely in /proc/interrupts mlx5: Fix error code translation from firmware to driver IB/mlx5: Fix opt param mask according to firmware spec mlx5: Fix opt param mask for sq err to rts transition IB/mlx5: Disable atomic operations mlx5: Fix layout of struct mlx5_init_seg mlx5: Keep polling to reclaim pages while any returned IB/mlx5: Avoid async events on invalid port number IB/mlx5: Decrease memory consumption of mr caches mlx5: Remove checksum on command interface commands IB/mlx5: Fix memory leak in mlx5_ib_create_srq IB/mlx5: Flush cache workqueue before destroying it IB/mlx5: Fix send work queue size calculation
2013-10-14Merge branch 'misc' into for-nextRoland Dreier
2013-10-14IB: Remove unnecessary semicolonsJoe Perches
These aren't necessary after switch blocks. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Ensure proper synchronization accessing memoryEli Cohen
Call mlx5_ib_populate_pas() before mapping the DMA buffer to ensure the hardware reads the values written by the CPU. Found by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Fix alignment of reg umr gather buffersEli Cohen
The hardware requires that gather buffers for UMR work requests be aligned to 2K. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Fix eq names to display nicely in /proc/interruptsSagi Grimberg
It's helpful for a driver to put the pci slot name in its interrupt names, so /proc/interrupts will show the pci slot of the device. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Fix opt param mask according to firmware specEli Cohen
Failed to configure opt mask to configure rre from init to rtr. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10mlx5: Fix opt param mask for sq err to rts transitionEli Cohen
Add missing entry in the table for UC transport. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Disable atomic operationsEli Cohen
Currently Atomic operations don't work properly. Disable them for the time being. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Avoid async events on invalid port numberEli Cohen
On a single ported Connect-IB, its possible for the firmware to issue events on the non-existing 2nd port. Make sure to ignore events generated for such ports. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Decrease memory consumption of mr cachesEli Cohen
Change the logic so we do not allocate memory nor map the device before actually posting to the REG_UMR QP. In addition, unmap and free the memory after we get completion. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Fix memory leak in mlx5_ib_create_srqMoshe Lazer
The patch fixes the rollback in case of failure in creating SRQ. Signed-off-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Flush cache workqueue before destroying itMoshe Lazer
Destroying the workqueue without flushing it first can lead to a case in which the kernel tries to push a delayed work to the workqueue which does not exist anymore. Signed-off-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Fix send work queue size calculationEli Cohen
1. Make sure wqe_cnt does not exceed the limit published by firmware. 2. There is no requirement that the number of outstanding work requests will be a power of two. Remove the ilog2 in the calculation of sq.max_post to fix that. 3. Add case for IB_QPT_XRC_TGT in sq_overhead and return 0 as XRC target QPs do not have a send queue. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-03ib_srpt: always set response for task managementJack Wang
The SRP specification requires: "Response data shall be provided in any SRP_RSP response that is sent in response to an SRP_TSK_MGMT request (see 6.7). The information in the RSP_CODE field (see table 24) shall indicate the completion status of the task management function." So fix this to avoid the SRP initiator interprets task management functions that succeeded as failed. Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com> Cc: stable@vger.kernel.org # 3.3+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-01ib_srpt: Destroy cm_id before destroying QP.Nicholas Bellinger
This patch fixes a bug where ib_destroy_cm_id() was incorrectly being called after srpt_destroy_ch_ib() had destroyed the active QP. This would result in the following failed SRP_LOGIN_REQ messages: Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff1762bd, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c903009f8f41) Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff1758f9, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 2 (guid=0xfe80000000000000:0x2c903009f8f42) Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff175941, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 2 (guid=0xfe80000000000000:0x2c90300a3cfb2) Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1) mlx4_core 0000:84:00.0: command 0x19 failed: fw status = 0x9 rejected SRP_LOGIN_REQ because creating a new RDMA channel failed. Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1) mlx4_core 0000:84:00.0: command 0x19 failed: fw status = 0x9 rejected SRP_LOGIN_REQ because creating a new RDMA channel failed. Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1) Reported-by: Navin Ahuja <navin.ahuja@saratoga-speed.com> Cc: stable@vger.kernel.org # 3.3+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-12Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Lots of activity again this round for I/O performance optimizations (per-cpu IDA pre-allocation for vhost + iscsi/target), and the addition of new fabric independent features to target-core (COMPARE_AND_WRITE + EXTENDED_COPY). The main highlights include: - Support for iscsi-target login multiplexing across individual network portals - Generic Per-cpu IDA logic (kent + akpm + clameter) - Conversion of vhost to use per-cpu IDA pre-allocation for descriptors, SGLs and userspace page pointer list - Conversion of iscsi-target + iser-target to use per-cpu IDA pre-allocation for descriptors - Add support for generic COMPARE_AND_WRITE (AtomicTestandSet) emulation for virtual backend drivers - Add support for generic EXTENDED_COPY (CopyOffload) emulation for virtual backend drivers. - Add support for fast memory registration mode to iser-target (Vu) The patches to add COMPARE_AND_WRITE and EXTENDED_COPY support are of particular significance, which make us the first and only open source target to support the full set of VAAI primitives. Currently Linux clients are lacking upstream support to actually utilize these primitives. However, with server side support now in place for folks like MKP + ZAB working on the client, this logic once reserved for the highest end of storage arrays, can now be run in VMs on their laptops" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (50 commits) target/iscsi: Bump versions to v4.1.0 target: Update copyright ownership/year information to 2013 iscsi-target: Bump default TCP listen backlog to 256 target: Fix >= v3.9+ regression in PR APTPL + ALUA metadata write-out iscsi-target; Bump default CmdSN Depth to 64 iscsi-target: Remove unnecessary wait_for_completion in iscsi_get_thread_set iscsi-target: Add thread_set->ts_activate_sem + use common deallocate iscsi-target: Fix race with thread_pre_handler flush_signals + ISCSI_THREAD_SET_DIE target: remove unused including <linux/version.h> iser-target: introduce fast memory registration mode (FRWR) iser-target: generalize rdma memory registration and cleanup iser-target: move rdma wr processing to a shared function target: Enable global EXTENDED_COPY setup/release target: Add Third Party Copy (3PC) bit in INQUIRY response target: Enable EXTENDED_COPY setup in spc_parse_cdb target: Add support for EXTENDED_COPY copy offload emulation target: Avoid non-existent tg_pt_gp_mem in target_alua_state_check target: Add global device list for EXTENDED_COPY target: Make helpers non static for EXTENDED_COPY command setup target: Make spc_parse_naa_6h_vendor_specific non static ...
2013-09-10target: Update copyright ownership/year information to 2013Nicholas Bellinger
Update copyright ownership/year information for target-core, loopback, iscsi-target, tcm_qla2xx, vhost and iser-target. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-10iser-target: introduce fast memory registration mode (FRWR)Vu Pham
This model was introduced in 00f7ec36c "RDMA/core: Add memory management extensions support" and works when the IB device supports the IB_DEVICE_MEM_MGT_EXTENSIONS capability. Upon creating the isert device, ib_isert will test whether the HCA supports FRWR. If supported then set the flag and assign function pointers that handle fast registration and deregistration of appropriate resources (fast_reg descriptors). When new connection coming in, ib_isert will check frwr flag and create frwr resouces, if fail to do it will switch back to old model of using global dma key and turn off the frwr support. Registration is done using posting IB_WR_FAST_REG_MR to the QP and invalidations using posting IB_WR_LOCAL_INV. Signed-off-by: Vu Pham <vu@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-10iser-target: generalize rdma memory registration and cleanupVu Pham
Current driver uses global dma key to register the memory pointed by sg list provided by the target core. This is the preparation step for adding more methods like fast path memory registration, make the reg/unreg calls be function pointers. Signed-off-by: Vu Pham <vu@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-10iser-target: move rdma wr processing to a shared functionVu Pham
isert_put_datain() and isert_get_dataout() share a lot of code in rdma wr processing, move this common code to a shared function. Use isert_unmap_cmd to cleanup for RDMA_READ completion. Remove duplicate field in isert_cmd and isert_rdma_wr structs Change misc debug messages to track isert_cmd Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Vu Pham <vu@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-09iscsi/iser-target: Convert to command priv_size usageNicholas Bellinger
This command converts iscsi/isert-target to use allocations based on iscsit_transport->priv_size within iscsit_allocate_cmd(), instead of using an embedded isert_cmd->iscsi_cmd. This includes removing iscsit_transport->alloc_cmd() usage, along with updating isert-target code to use iscsit_priv_cmd(). Also, remove left-over iscsit_transport->release_cmd() usage for direct calls to iscsit_release_cmd(), and drop the now unused lio_cmd_cache and isert_cmd_cache. Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-09iser-target: Updates for login negotiation multi-plexing supportNicholas Bellinger
This patch updates iser-target code to support login negotiation multi-plexing. This includes only using isert_conn->conn_login_comp for the first login request PDU, pushing the subsequent processing to iscsi_conn->login_work -> iscsi_target_do_login_rx(), and turning isert_get_login_rx() into a NOP. v3 changes: - Drop unnecessary LOGIN_FLAGS_READ_ACTIVE bit set in isert_rx_login_req() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "The usual trivial updates all over the tree -- mostly typo fixes and documentation updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (52 commits) doc: Documentation/cputopology.txt fix typo treewide: Convert retrun typos to return Fix comment typo for init_cma_reserved_pageblock Documentation/trace: Correcting and extending tracepoint documentation mm/hotplug: fix a typo in Documentation/memory-hotplug.txt power: Documentation: Update s2ram link doc: fix a typo in Documentation/00-INDEX Documentation/printk-formats.txt: No casts needed for u64/s64 doc: Fix typo "is is" in Documentations treewide: Fix printks with 0x%# zram: doc fixes Documentation/kmemcheck: update kmemcheck documentation doc: documentation/hwspinlock.txt fix typo PM / Hibernate: add section for resume options doc: filesystems : Fix typo in Documentations/filesystems scsi/megaraid fixed several typos in comments ppc: init_32: Fix error typo "CONFIG_START_KERNEL" treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacks page_isolation: Fix a comment typo in test_pages_isolated() doc: fix a typo about irq affinity ...
2013-09-05Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull main batch of InfiniBand/RDMA changes from Roland Dreier: - Large ocrdma HW driver update: add "fast register" work requests, fixes, cleanups - Add receive flow steering support for raw QPs - Fix IPoIB neighbour race that leads to crash - iSER updates including support for using "fast register" memory registration - IPv6 support for iWARP - XRC transport fixes * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (54 commits) RDMA/ocrdma: Fix compiler warning about int/pointer size mismatch IB/iser: Fix redundant pointer check in dealloc flow IB/iser: Fix possible memory leak in iser_create_frwr_pool() IB/qib: Move COUNTER_MASK definition within qib_mad.h header guards RDMA/ocrdma: Fix passing wrong opcode to modify_srq RDMA/ocrdma: Fill PVID in UMC case RDMA/ocrdma: Add ABI versioning support RDMA/ocrdma: Consider multiple SGES in case of DPP RDMA/ocrdma: Fix for displaying proper link speed RDMA/ocrdma: Increase STAG array size RDMA/ocrdma: Dont use PD 0 for userpace CQ DB RDMA/ocrdma: FRMA code cleanup RDMA/ocrdma: For ERX2 irrespective of Qid, num_posted offset is 24 RDMA/ocrdma: Fix to work with even a single MSI-X vector RDMA/ocrdma: Remove the MTU check based on Ethernet MTU RDMA/ocrdma: Add support for fast register work requests (FRWR) RDMA/ocrdma: Create IRD queue fix IB/core: Better checking of userspace values for receive flow steering IB/mlx4: Add receive flow steering support IB/core: Export ib_create/destroy_flow through uverbs ...
2013-09-04Merge tag 'PTR_RET-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull PTR_RET() removal patches from Rusty Russell: "PTR_RET() is a weird name, and led to some confusing usage. We ended up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages. This has been sitting in linux-next for a whole cycle" [ There are still some PTR_RET users scattered about, with some of them possibly being new, but most of them existing in Rusty's tree too. We have that #define PTR_RET(p) PTR_ERR_OR_ZERO(p) thing in <linux/err.h>, so they continue to work for now - Linus ] * tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: GFS2: Replace PTR_RET with PTR_ERR_OR_ZERO Btrfs: volume: Replace PTR_RET with PTR_ERR_OR_ZERO drm/cma: Replace PTR_RET with PTR_ERR_OR_ZERO sh_veu: Replace PTR_RET with PTR_ERR_OR_ZERO dma-buf: Replace PTR_RET with PTR_ERR_OR_ZERO drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZERO mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR(). staging/zcache: don't use PTR_RET(). remoteproc: don't use PTR_RET(). pinctrl: don't use PTR_RET(). acpi: Replace weird use of PTR_RET. s390: Replace weird use of PTR_RET. PTR_RET is now PTR_ERR_OR_ZERO(): Replace most. PTR_RET is now PTR_ERR_OR_ZERO
2013-09-03Merge branches 'cxgb4', 'flowsteer', 'ipoib', 'iser', 'mlx4', 'ocrdma' and ↵Roland Dreier
'qib' into for-next
2013-09-03RDMA/ocrdma: Fix compiler warning about int/pointer size mismatchRoland Dreier
Fix: drivers/infiniband/hw/ocrdma/ocrdma_verbs.c: In function 'ocrdma_build_fr': >> drivers/infiniband/hw/ocrdma/ocrdma_verbs.c:1832:7: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] mr = (struct ocrdma_mr *)qp->dev->stag_arr[(hdr->lkey >> 8) & ^ drivers/infiniband/hw/ocrdma/ocrdma_verbs.c: In function 'ocrdma_alloc_frmr': >> drivers/infiniband/hw/ocrdma/ocrdma_verbs.c:2661:64: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] dev->stag_arr[(mr->hwmr.lkey >> 8) & (OCRDMA_MAX_STAG - 1)] = (u64) mr; Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02IB/iser: Fix redundant pointer check in dealloc flowSagi Grimberg
This bug was discovered by Smatch static checker run by Dan Carpenter. If in free_rx_descriptors(), rx_descs are not NULL then the iser device is definately not NULL, so no need to check it before dereferencing it. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02IB/iser: Fix possible memory leak in iser_create_frwr_pool()Roi Dayan
Fix leak where desc is not being freed in error flows. Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02IB/qib: Move COUNTER_MASK definition within qib_mad.h header guardsIra Weiny
Commit 36a8f01cd24b ("IB/qib: Add congestion control agent implementation") caused statements to leak pass the header guard. Fix this. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Fix passing wrong opcode to modify_srqNaresh Gottumukkala
Fix passing wrong opcode to ocrdma_modify_srq and query SRQ. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Fill PVID in UMC caseNaresh Gottumukkala
In UMC case, driver needs to fill PVID in the address vector template for UD traffic. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Add ABI versioning supportNaresh Gottumukkala
Add ABI versioning support between driver and userspace library. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Consider multiple SGES in case of DPPNaresh Gottumukkala
While posting inline DPP data, we are not considering multiple sges. Fix this. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Fix for displaying proper link speedNaresh Gottumukkala
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Increase STAG array sizeNaresh Gottumukkala
1) Increase STAG Array size. 2) Max inline data size should be set to the same value used during QP creation 3) Set max_sge_rd to zero since we dont support RD transport in our adapters. 4) Max cqes reported in ibv_devinfo should be from QUERY_CONFIG. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Dont use PD 0 for userpace CQ DBNaresh Gottumukkala
Create_CQ verb doesn't provide a PD pointer. So, until now we are creating all (both userspace and kernel) CQ DB regions from PD0. This will result in mmapping PD0 to applications. A rogue userspace application can mess things up. Also more serious issues is even the be2net NIC uses PD0. This patch addresses this problem by: 1) Create a PD page for every userspace application when the alloc_ucontext is called. This will be destroyed in dealloc_ucontext. 2) All CQs for that context will use the PD allocated in ucontext. 3) The first create_PD call from application will result in returning the PD address from its ucontext (no new PD will be created). 4) For subsecquent create_pd calls from application, we create new PDs for the application. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: FRMA code cleanupNaresh Gottumukkala
1) Fixed setting FR_MR bit for FRWR stag allocation 2) Access rights are passsed during FRWR stage and not during STAT allocation stage 3) FRWR WQE structure cleanup 4) Add QP level signaled bit. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: For ERX2 irrespective of Qid, num_posted offset is 24Naresh Gottumukkala
1) All RQ doorbells are handled by ERX2 and doorbell->num_posted offset is constant to bit offset 24 for ERX2 irrspective of Q id. 2) Fixed RESET to INIT state change (from ERR->RST->INIT->RTR case). Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Fix to work with even a single MSI-X vectorNaresh Gottumukkala
There are cases like SRIOV where can get only one MSI-X vector allocated for RoCE. In that case we need to use the vector for both data plane and control plane. We need to use EQ create version V2. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Remove the MTU check based on Ethernet MTUNaresh Gottumukkala
Also increase MAX AH to 512. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Add support for fast register work requests (FRWR)Naresh Gottumukkala
Also get the max_srq value from query_config mailbox response. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Create IRD queue fixNaresh Gottumukkala
1) Fix ocrdma_get_num_posted_shift for upto 128 QPs. 2) Create for min of dev->max_wqe and requested wqe in create_qp. 3) As part of creating ird queue, populate with basic header templates. 4) Make sure all the DB memory allocated to userspace are page aligned. 5) Fix issue in checking the mmap local cache. 6) Some code cleanup. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02IB/core: Better checking of userspace values for receive flow steeringMatan Barak
- Don't allow unsupported comp_mask values, user should check ibv_query_device to know which features are supported. - Add a check in ib_uverbs_create_flow() to verify the size passed from the user space. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-28IB/mlx4: Add receive flow steering supportHadar Hen Zion
Implement ib_create_flow() and ib_destroy_flow(). Translate the verbs structures provided by the user to HW structures and call the MLX4_QP_FLOW_STEERING_ATTACH/DETACH firmware commands. On the ATTACH command completion, the firmware provides a 64-bit registration ID, which is placed into struct mlx4_ib_flow that wraps the instance of struct ib_flow which is retuned to caller. Later, this reg ID is used for detaching that flow from the firmware. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-28IB/core: Export ib_create/destroy_flow through uverbsHadar Hen Zion
Implement ib_uverbs_create_flow() and ib_uverbs_destroy_flow() to support flow steering for user space applications. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-28IB/core: Infrastructure for extensible uverbs commandsIgor Ivanov
Add infrastructure to support extended uverbs capabilities in a forward/backward manner. Uverbs command opcodes which are based on the verbs extensions approach should be greater or equal to IB_USER_VERBS_CMD_THRESHOLD. They have new header format and processed a bit differently. Whenever a specific IB_USER_VERBS_CMD_XXX is extended, which practically means it needs to have additional arguments, we will be able to add them without creating a completely new IB_USER_VERBS_CMD_YYY command or bumping the uverbs ABI version. This patch for itself doesn't provide the whole scheme which is also dependent on adding a comp_mask field to each extended uverbs command struct. The new header framework allows for future extension of the CMD arguments (ib_uverbs_cmd_hdr.in_words, ib_uverbs_cmd_hdr.out_words) for an existing new command (that is a command that supports the new uverbs command header format suggested in this patch) w/o bumping ABI version and with maintaining backward and formward compatibility to new and old libibverbs versions. In the uverbs command we are passing both uverbs arguments and the provider arguments. We split the ib_uverbs_cmd_hdr.in_words to ib_uverbs_cmd_hdr.in_words which will now carry only uverbs input argument struct size and ib_uverbs_cmd_hdr.provider_in_words that will carry the provider input argument size. Same goes for the response (the uverbs CMD output argument). For example take the create_cq call and the mlx4_ib provider: The uverbs layer gets libibverb's struct ibv_create_cq (named struct ib_uverbs_create_cq in the kernel), mlx4_ib gets libmlx4's struct mlx4_create_cq (which includes struct ibv_create_cq and is named struct mlx4_ib_create_cq in the kernel) and in_words = sizeof(mlx4_create_cq)/4 . Thus ib_uverbs_cmd_hdr.in_words carry both uverbs plus mlx4_ib input argument sizes, where uverbs assumes it knows the size of its input argument - struct ibv_create_cq. Now, if we wish to add a variable to struct ibv_create_cq, we can add a comp_mask field to the struct which is basically bit field indicating which fields exists in the struct (as done for the libibverbs API extension), but we need a way to tell what is the total size of the struct and not assume the struct size is predefined (since we may get different struct sizes from different user libibverbs versions). So we know at which point the provider input argument (struct mlx4_create_cq) begins. Same goes for extending the provider struct mlx4_create_cq. Thus we split the ib_uverbs_cmd_hdr.in_words to ib_uverbs_cmd_hdr.in_words which will now carry only uverbs input argument struct size and ib_uverbs_cmd_hdr.provider_in_words that will carry the provider (mlx4_ib) input argument size. Signed-off-by: Igor Ivanov <Igor.Ivanov@itseez.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-28IB/core: Add receive flow steering supportHadar Hen Zion
The RDMA stack allows for applications to create IB_QPT_RAW_PACKET QPs, which receive plain Ethernet packets, specifically packets that don't carry any QPN to be matched by the receiving side. Applications using these QPs must be provided with a method to program some steering rule with the HW so packets arriving at the local port can be routed to them. This patch adds ib_create_flow(), which allow providing a flow specification for a QP. When there's a match between the specification and a received packet, the packet is forwarded to that QP, in a the same way one uses ib_attach_multicast() for IB UD multicast handling. Flow specifications are provided as instances of struct ib_flow_spec_yyy, which describe L2, L3 and L4 headers. Currently specs for Ethernet, IPv4, TCP and UDP are defined. Flow specs are made of values and masks. The input to ib_create_flow() is a struct ib_flow_attr, which contains a few mandatory control elements and optional flow specs. struct ib_flow_attr { enum ib_flow_attr_type type; u16 size; u16 priority; u32 flags; u8 num_of_specs; u8 port; /* Following are the optional layers according to user request * struct ib_flow_spec_yyy * struct ib_flow_spec_zzz */ }; As these specs are eventually coming from user space, they are defined and used in a way which allows adding new spec types without kernel/user ABI change, just with a little API enhancement which defines the newly added spec. The flow spec structures are defined with TLV (Type-Length-Value) entries, which allows calling ib_create_flow() with a list of variable length of optional specs. For the actual processing of ib_flow_attr the driver uses the number of specs and the size mandatory fields along with the TLV nature of the specs. Steering rules processing order is according to the domain over which the rule is set and the rule priority. All rules set by user space applicatations fall into the IB_FLOW_DOMAIN_USER domain, other domains could be used by future IPoIB RFS and Ethetool flow-steering interface implementation. Lower numerical value for the priority field means higher priority. The returned value from ib_create_flow() is a struct ib_flow, which contains a database pointer (handle) provided by the HW driver to be used when calling ib_destroy_flow(). Applications that offload TCP/IP traffic can also be written over IB UD QPs. The ib_create_flow() / ib_destroy_flow() API is designed to support UD QPs too. A HW driver can set IB_DEVICE_MANAGED_FLOW_STEERING to denote support for flow steering. The ib_flow_attr enum type supports usage of flow steering for promiscuous and sniffer purposes: IB_FLOW_ATTR_NORMAL - "regular" rule, steering according to rule specification IB_FLOW_ATTR_ALL_DEFAULT - default unicast and multicast rule, receive all Ethernet traffic which isn't steered to any QP IB_FLOW_ATTR_MC_DEFAULT - same as IB_FLOW_ATTR_ALL_DEFAULT but only for multicast IB_FLOW_ATTR_SNIFFER - sniffer rule, receive all port traffic ALL_DEFAULT and MC_DEFAULT rules options are valid only for Ethernet link type. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 17:37:53 +0000