summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2010-02-24IB/uverbs: use stack variable 'base' in ib_uverbs_add_oneAlexander Chiang
This change is not useful by itself, but sets us up for a future change that allows us to support more than IB_UVERBS_MAX_DEVICES in a system. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24IB/uverbs: Use stack variable 'devnum' in ib_uverbs_add_oneAlexander Chiang
This change is not useful by itself, but it sets us up for a future change that allows us to dynamically allocate device numbers in case we have more than IB_UVERBS_MAX_DEVICES in the system. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24IB/uverbs: Remove dev_tableAlexander Chiang
dev_table's raison d'etre was to associate an inode back to a struct ib_uverbs_device. However, now that we've converted ib_uverbs_device to contain an embedded cdev (instead of a *cdev), we can use the container_of() macro and cast back to the containing device. There's no longer any need for dev_table, so get rid of it. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24IB/uverbs: Convert *cdev to cdev in struct ib_uverbs_deviceAlexander Chiang
Instead of storing a pointer to a cdev, embed the entire struct cdev. This change allows us to use the container_of() macro in ib_uverbs_open() in a future patch. This change increases the size of struct ib_uverbs_device to 168 bytes across 3 cachelines from 80 bytes in 2 cachelines. However, we rearrange the members so that everything fits into the first cacheline except for the struct cdev. Finally, we don't touch the cdev in any fastpaths, so this change shouldn't negatively affect performance. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24IB/iser: Remove redundant locking from iser scsi command response flowOr Gerlitz
Currently the iSER receive completion flow takes the session lock twice. Optimize it to avoid the first one by letting iser_task_rdma_finalize() be called only from the cleanup_task callback invoked by iscsi_free_task, thus reducing the contention on the session lock between the scsi command submission to the scsi command completion flows. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24IB/iser: Use libiscsi passthrough modeOr Gerlitz
libiscsi passthrough mode invokes the transport xmit calls directly without first going through an internal queue, unlike the other mode, which uses a queue and a xmitworker thread. Now that the "cant_sleep" prerequisite of iscsi_host_alloc is met, move to use it. Handling xmit errors is now done by the passthrough flow of libiscsi. Since the queue/worker aren't used in this mode, the code that schedules the xmitworker is removed. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24IB/iser: Remove unnecessary connection checksOr Gerlitz
Remove unnecessary checks for the IB connection state and for QP overflow, as conn state changes are reported by iSER to libiscsi and handled there. QP overflow is theoretically possible only when unsolicited data-outs are used; anyway it's being checked and handled by HW drivers. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24IB/iser: Use atomic allocationsOr Gerlitz
Two minor flows in iSER's data path still use allocations; move them to be atomic as a preperation step towards moving to use libiscsi passthrough mode. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24IB/iser: Simplify send flow/descriptorsOr Gerlitz
Simplify and shrink the logic/code used for the send descriptors. Changes include removing struct iser_dto (an unnecessary abstraction), using struct iser_regd_buf only for handling SCSI commands, using dma_sync instead of dma_map/unmap, etc. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24IB/iser: Use different CQ for send completionsOr Gerlitz
Use a different CQ for send completions, where send completions are polled by the interrupt-driven receive completion handler. Therefore, interrupts aren't used for the send CQ. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24IB/iser: Remove atomic counter for posted receive buffersOr Gerlitz
Now that both the posting and reaping of receive buffers is done in the completion path, the counter of outstanding buffers not be atomic. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24IB/iser: New receive buffer posting logicOr Gerlitz
Currently, the recv buffer posting logic is based on the transactional nature of iSER which allows for posting a buffer before sending a PDU. Change this to post only when the number of outstanding recv buffers is below a water mark and in a batched manner, thus simplifying and optimizing the data path. Use a pre-allocated ring of recv buffers instead of allocating from kmem cache. A special treatment is given to the login response buffer whose size must be 8K unlike the size of buffers used for any other purpose which is 128 bytes. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24IB/iser: Revert commit bba7ebb "avoid recv buffer exhaustion"Or Gerlitz
We will make a major change in the recv buffer posting logic, after which the problem commit bba7ebb "avoid recv buffer exhaustion caused by unexpected PDUs" comes to solve doesn't exist any more, so revert it. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-19RDMA/nes: Change WQ overflow return codeOr Gerlitz
Change the nes driver to return -ENOMEM on SQ/RQ overflow to match the return code of other RDMA HW drivers (e.g cxgb3, ehca, mlx4, mthca). Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Acked-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-19RDMA/nes: Multiple disconnects cause crash during AE handlingFaisal Latif
There is a double disconnect during AE processing, causing crashes. While fixing the crash, also simplify the AE handling code. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-19RDMA/nes: Fix crash when listener destroyed during loopback setupFaisal Latif
When a listener is destroyed and there is an MPA response pending for loopback connection, the active side cm_node gets destroyed twice: once in cm_event_connect_error() and again in nes_accept()/nes_reject(). Increment the cm_node's refcount so it's not destroyed by cm_event_connect_error(). Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-19RDMA/nes: Use atomic counters for CM listener create and destroyFaisal Latif
After running long iterative MPI tests, sometimes ethtool reports a "CM Destroy Listener" count more than the "CM Create Listener" count. This inconsistency is fixed by making counter variables atomic. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-19IB/ehca: Require in_wc in process_mad()Alexander Schmidt
If the caller does not pass a valid in_wc to process_mad(), return MAD failure status, as it is not possible to generate a valid MAD redirect response (and redirects are the only MAD responses ehca generates). Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-18ipv6: drop unused "dev" arg of icmpv6_send()Alexey Dobriyan
Dunno, what was the idea, it wasn't used for a long time. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-02-12IB/ehca: Allow access for ib_query_qp()Alexander Schmidt
The max_dest_rd_atomic and max_qp_rd_atomic values are properly returned by query_qp(), so there should not be an error returned when they are queried. Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-12IB/ehca: Do not turn off irqs in tasklet contextAlexander Schmidt
The irq_spinlock is only taken in tasklet context, so it is safe not to disable hardware interrupts. Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-12IB/mlx4: Simplify retrieval of ib_deviceEli Cohen
struct ib_qp already holds a pointer to the ib device. No need to dive to the hw device object to retrieve it. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-12net: use netdev_mc_count and netdev_mc_empty when appropriateJiri Pirko
This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-11RDMA: Use rlimit helpersJiri Slaby
Make sure compiler won't do weird things with limits by using the rlimit helpers added in 3e10e716 ("resource: add helpers for fetching rlimits"). E.g. fetching them twice may return 2 different values after writable limits are implemented. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-11IPoIB: Remove TX moderation settings from ethtool supportOr Gerlitz
As of commit f56bcd8 ("IPoIB: Use separate CQ for UD send completions"), there are no TX interrupts. Change the ethtool code not to report TX moderation settings, so users will not be misled to think they can control TX interrupt moderation. Pointed out by Alex Vainman <alexv@voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-11RDMA/cxgb3: Remove BUG_ON() on CQ rearm failureSteve Wise
Failure to rearm a CQ means the cxgb3 device is wedged, but we shouldn't kill the whole system with a BUG_ON() if this happens. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cm: Revert association of an RDMA device when binding to loopback
2010-02-10RDMA/cm: Revert association of an RDMA device when binding to loopbackSean Hefty
Revert the following change from commit 6f8372b6 ("RDMA/cm: fix loopback address support") The defined behavior of rdma_bind_addr is to associate an RDMA device with an rdma_cm_id, as long as the user specified a non- zero address. (ie they weren't just trying to reserve a port) Currently, if the loopback address is passed to rdma_bind_addr, no device is associated with the rdma_cm_id. Fix this. It turns out that important apps such as Open MPI depend on rdma_bind_addr() NOT associating any RDMA device when binding to a loopback address. Open MPI is being updated to deal with this, but at least until a new Open MPI release is available, maintain the previous behavior: allow rdma_bind_addr() to succeed, but do not bind to a device. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-09tree-wide: Assorted spelling fixesDaniel Mack
In particular, several occurances of funny versions of 'success', 'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address', 'beginning', 'desirable', 'separate' and 'necessary' are fixed. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Joe Perches <joe@perches.com> Cc: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-26Fix failure exit in ipathfsAl Viro
deactivate_locked_super() will be done by caller of fill_super, doing it there as well is b0rken. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-23Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-01-07drivers/infiniband/hw/cxgb3/iwch_cm.c: use %pM to show MAC addressH Hartley Sweeten
Use the %pM kernel extension to display the MAC address. The only difference in the output is that the MAC address is shown in the usual colon-separated hex notation. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-06Merge branches 'misc' and 'mlx4' into for-nextRoland Dreier
2010-01-06IB/addr: Correct CONFIG_IPv6 to CONFIG_IPV6Robert P. J. Day
Correct misspelled "CONFIG_IPv6" that was introduced in commit d14714df ("IB/addr: Fix IPv6 routing lookup"). The config variable should be all uppercase. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> [ This was my fault when I munged the original patch. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-01-06IB/mlx4: Fix queue overflow check in post_recvOr Gerlitz
In mlx4_ib_post_recv(), we should check the queue for overflow using recv_cq instead of send_cq (current code looks like a copy-and-paste mistake). Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-01-06IB/mlx4: Initialize SRQ scatter entries when creating an SRQJack Morgenstein
As for memfree mthca hardware, ConnectX also requires SRQ WQE scatter entries to be initialized with the invalid L_Key at SRQ creation time. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-22kfifo: fix warn_unused_resultStefani Seibold
Fix the "ignoring return value of '...', declared with attribute warn_unused_result" compiler warning in several users of the new kfifo API. It removes the __must_check attribute from kfifo_in() and kfifo_in_locked() which must not necessary performed. Fix the allocation bug in the nozomi driver file, by moving out the kfifo_alloc from the interrupt handler into the probe function. Fix the kfifo_out() and kfifo_out_locked() users to handle a unexpected end of fifo. Signed-off-by: Stefani Seibold <stefani@seibold.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22kfifo: rename kfifo_put... into kfifo_in... and kfifo_get... into kfifo_out...Stefani Seibold
rename kfifo_put... into kfifo_in... to prevent miss use of old non in kernel-tree drivers ditto for kfifo_get... -> kfifo_out... Improve the prototypes of kfifo_in and kfifo_out to make the kerneldoc annotations more readable. Add mini "howto porting to the new API" in kfifo.h Signed-off-by: Stefani Seibold <stefani@seibold.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22kfifo: cleanup namespaceStefani Seibold
change name of __kfifo_* functions to kfifo_*, because the prefix __kfifo should be reserved for internal functions only. Signed-off-by: Stefani Seibold <stefani@seibold.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22kfifo: move out spinlockStefani Seibold
Move the pointer to the spinlock out of struct kfifo. Most users in tree do not actually use a spinlock, so the few exceptions now have to call kfifo_{get,put}_locked, which takes an extra argument to a spinlock. Signed-off-by: Stefani Seibold <stefani@seibold.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22kfifo: move struct kfifo in placeStefani Seibold
This is a new generic kernel FIFO implementation. The current kernel fifo API is not very widely used, because it has to many constrains. Only 17 files in the current 2.6.31-rc5 used it. FIFO's are like list's a very basic thing and a kfifo API which handles the most use case would save a lot of development time and memory resources. I think this are the reasons why kfifo is not in use: - The API is to simple, important functions are missing - A fifo can be only allocated dynamically - There is a requirement of a spinlock whether you need it or not - There is no support for data records inside a fifo So I decided to extend the kfifo in a more generic way without blowing up the API to much. The new API has the following benefits: - Generic usage: For kernel internal use and/or device driver. - Provide an API for the most use case. - Slim API: The whole API provides 25 functions. - Linux style habit. - DECLARE_KFIFO, DEFINE_KFIFO and INIT_KFIFO Macros - Direct copy_to_user from the fifo and copy_from_user into the fifo. - The kfifo itself is an in place member of the using data structure, this save an indirection access and does not waste the kernel allocator. - Lockless access: if only one reader and one writer is active on the fifo, which is the common use case, no additional locking is necessary. - Remove spinlock - give the user the freedom of choice what kind of locking to use if one is required. - Ability to handle records. Three type of records are supported: - Variable length records between 0-255 bytes, with a record size field of 1 bytes. - Variable length records between 0-65535 bytes, with a record size field of 2 bytes. - Fixed size records, which no record size field. - Preserve memory resource. - Performance! - Easy to use! This patch: Since most users want to have the kfifo as part of another object, reorganize the code to allow including struct kfifo in another data structure. This requires changing the kfifo_alloc and kfifo_init prototypes so that we pass an existing kfifo pointer into them. This patch changes the implementation and all existing users. [akpm@linux-foundation.org: fix warning] Signed-off-by: Stefani Seibold <stefani@seibold.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (38 commits) direct I/O fallback sync simplification ocfs: stop using do_sync_mapping_range cleanup blockdev_direct_IO locking make generic_acl slightly more generic sanitize xattr handler prototypes libfs: move EXPORT_SYMBOL for d_alloc_name vfs: force reval of target when following LAST_BIND symlinks (try #7) ima: limit imbalance msg Untangling ima mess, part 3: kill dead code in ima Untangling ima mess, part 2: deal with counters Untangling ima mess, part 1: alloc_file() O_TRUNC open shouldn't fail after file truncation ima: call ima_inode_free ima_inode_free IMA: clean up the IMA counts updating code ima: only insert at inode creation time ima: valid return code from ima_inode_alloc fs: move get_empty_filp() deffinition to internal.h Sanitize exec_permission_lite() Kill cached_lookup() and real_lookup() Kill path_lookup_open() ... Trivial conflicts in fs/direct-io.c
2009-12-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (45 commits) RDMA/cxgb3: Fix error paths in post_send and post_recv RDMA/nes: Fix stale ARP issue RDMA/nes: FIN during MPA startup causes timeout RDMA/nes: Free kmap() resources RDMA/nes: Check for zero STag RDMA/nes: Fix Xansation test crash on cm_node ref_count RDMA/nes: Abnormal listener exit causes loopback node crash RDMA/nes: Fix crash in nes_accept() RDMA/nes: Resource not freed for REJECTed connections RDMA/nes: MPA request/response error checking RDMA/nes: Fix query of ORD values RDMA/nes: Fix MAX_CM_BUFFER define RDMA/nes: Pass correct size to ioremap_nocache() RDMA/nes: Update copyright and branding string RDMA/nes: Add max_cqe check to nes_create_cq() RDMA/nes: Clean up struct nes_qp RDMA/nes: Implement IB_SIGNAL_ALL_WR as an iWARP extension RDMA/nes: Add additional SFP+ PHY uC status check and PHY reset RDMA/nes: Correct fast memory registration implementation IB/ehca: Fix error paths in post_send and post_recv ...
2009-12-16switch alloc_file() to passing struct pathAl Viro
... and have the caller grab both mnt and dentry; kill leak in infiniband, while we are at it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-15Merge branches 'amso1100', 'cma', 'cxgb3', 'ehca', 'ipath', 'ipoib', 'iser', ↵Roland Dreier
'misc', 'mlx4' and 'nes' into for-next
2009-12-15RDMA/cxgb3: Fix error paths in post_send and post_recvFrank Zago
Always set bad_wr when an immediate error is detected. Return ENOMEM for queue full instead of EINVAL to match other drivers. Signed-off-by: Frank Zago <fzago@systemfabricworks.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-12-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits) m68k: rename global variable vmalloc_end to m68k_vmalloc_end percpu: add missing per_cpu_ptr_to_phys() definition for UP percpu: Fix kdump failure if booted with percpu_alloc=page percpu: make misc percpu symbols unique percpu: make percpu symbols in ia64 unique percpu: make percpu symbols in powerpc unique percpu: make percpu symbols in x86 unique percpu: make percpu symbols in xen unique percpu: make percpu symbols in cpufreq unique percpu: make percpu symbols in oprofile unique percpu: make percpu symbols in tracer unique percpu: make percpu symbols under kernel/ and mm/ unique percpu: remove some sparse warnings percpu: make alloc_percpu() handle array types vmalloc: fix use of non-existent percpu variable in put_cpu_var() this_cpu: Use this_cpu_xx in trace_functions_graph.c this_cpu: Use this_cpu_xx for ftrace this_cpu: Use this_cpu_xx in nmi handling this_cpu: Use this_cpu operations in RCU this_cpu: Use this_cpu ops for VM statistics ... Fix up trivial (famous last words) global per-cpu naming conflicts in arch/x86/kvm/svm.c mm/slab.c
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
2009-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (222 commits) [SCSI] zfcp: Remove flag ZFCP_STATUS_FSFREQ_TMFUNCNOTSUPP [SCSI] zfcp: Activate fc4s attributes for zfcp in FC transport class [SCSI] zfcp: Block scsi_eh thread for rport state BLOCKED [SCSI] zfcp: Update FSF error reporting [SCSI] zfcp: Improve ELS ADISC handling [SCSI] zfcp: Simplify handling of ct and els requests [SCSI] zfcp: Remove ZFCP_DID_MASK [SCSI] zfcp: Move WKA port to zfcp FC code [SCSI] zfcp: Use common code definitions for FC CT structs [SCSI] zfcp: Use common code definitions for FC ELS structs [SCSI] zfcp: Update FCP protocol related code [SCSI] zfcp: Dont fail SCSI commands when transitioning to blocked fc_rport [SCSI] zfcp: Assign scheduled work to driver queue [SCSI] zfcp: Remove STATUS_COMMON_REMOVE flag as it is not required anymore [SCSI] zfcp: Implement module unloading [SCSI] zfcp: Merge trace code for fsf requests in one function [SCSI] zfcp: Access ports and units with container_of in sysfs code [SCSI] zfcp: Remove suspend callback [SCSI] zfcp: Remove global config_mutex [SCSI] zfcp: Replace local reference counting with common kref ...