summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw
AgeCommit message (Collapse)Author
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "The usual trivial updates all over the tree -- mostly typo fixes and documentation updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (52 commits) doc: Documentation/cputopology.txt fix typo treewide: Convert retrun typos to return Fix comment typo for init_cma_reserved_pageblock Documentation/trace: Correcting and extending tracepoint documentation mm/hotplug: fix a typo in Documentation/memory-hotplug.txt power: Documentation: Update s2ram link doc: fix a typo in Documentation/00-INDEX Documentation/printk-formats.txt: No casts needed for u64/s64 doc: Fix typo "is is" in Documentations treewide: Fix printks with 0x%# zram: doc fixes Documentation/kmemcheck: update kmemcheck documentation doc: documentation/hwspinlock.txt fix typo PM / Hibernate: add section for resume options doc: filesystems : Fix typo in Documentations/filesystems scsi/megaraid fixed several typos in comments ppc: init_32: Fix error typo "CONFIG_START_KERNEL" treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacks page_isolation: Fix a comment typo in test_pages_isolated() doc: fix a typo about irq affinity ...
2013-09-03Merge branches 'cxgb4', 'flowsteer', 'ipoib', 'iser', 'mlx4', 'ocrdma' and ↵Roland Dreier
'qib' into for-next
2013-09-03RDMA/ocrdma: Fix compiler warning about int/pointer size mismatchRoland Dreier
Fix: drivers/infiniband/hw/ocrdma/ocrdma_verbs.c: In function 'ocrdma_build_fr': >> drivers/infiniband/hw/ocrdma/ocrdma_verbs.c:1832:7: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] mr = (struct ocrdma_mr *)qp->dev->stag_arr[(hdr->lkey >> 8) & ^ drivers/infiniband/hw/ocrdma/ocrdma_verbs.c: In function 'ocrdma_alloc_frmr': >> drivers/infiniband/hw/ocrdma/ocrdma_verbs.c:2661:64: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] dev->stag_arr[(mr->hwmr.lkey >> 8) & (OCRDMA_MAX_STAG - 1)] = (u64) mr; Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02IB/qib: Move COUNTER_MASK definition within qib_mad.h header guardsIra Weiny
Commit 36a8f01cd24b ("IB/qib: Add congestion control agent implementation") caused statements to leak pass the header guard. Fix this. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Fix passing wrong opcode to modify_srqNaresh Gottumukkala
Fix passing wrong opcode to ocrdma_modify_srq and query SRQ. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Fill PVID in UMC caseNaresh Gottumukkala
In UMC case, driver needs to fill PVID in the address vector template for UD traffic. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Add ABI versioning supportNaresh Gottumukkala
Add ABI versioning support between driver and userspace library. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Consider multiple SGES in case of DPPNaresh Gottumukkala
While posting inline DPP data, we are not considering multiple sges. Fix this. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Fix for displaying proper link speedNaresh Gottumukkala
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Increase STAG array sizeNaresh Gottumukkala
1) Increase STAG Array size. 2) Max inline data size should be set to the same value used during QP creation 3) Set max_sge_rd to zero since we dont support RD transport in our adapters. 4) Max cqes reported in ibv_devinfo should be from QUERY_CONFIG. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Dont use PD 0 for userpace CQ DBNaresh Gottumukkala
Create_CQ verb doesn't provide a PD pointer. So, until now we are creating all (both userspace and kernel) CQ DB regions from PD0. This will result in mmapping PD0 to applications. A rogue userspace application can mess things up. Also more serious issues is even the be2net NIC uses PD0. This patch addresses this problem by: 1) Create a PD page for every userspace application when the alloc_ucontext is called. This will be destroyed in dealloc_ucontext. 2) All CQs for that context will use the PD allocated in ucontext. 3) The first create_PD call from application will result in returning the PD address from its ucontext (no new PD will be created). 4) For subsecquent create_pd calls from application, we create new PDs for the application. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: FRMA code cleanupNaresh Gottumukkala
1) Fixed setting FR_MR bit for FRWR stag allocation 2) Access rights are passsed during FRWR stage and not during STAT allocation stage 3) FRWR WQE structure cleanup 4) Add QP level signaled bit. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: For ERX2 irrespective of Qid, num_posted offset is 24Naresh Gottumukkala
1) All RQ doorbells are handled by ERX2 and doorbell->num_posted offset is constant to bit offset 24 for ERX2 irrspective of Q id. 2) Fixed RESET to INIT state change (from ERR->RST->INIT->RTR case). Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Fix to work with even a single MSI-X vectorNaresh Gottumukkala
There are cases like SRIOV where can get only one MSI-X vector allocated for RoCE. In that case we need to use the vector for both data plane and control plane. We need to use EQ create version V2. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Remove the MTU check based on Ethernet MTUNaresh Gottumukkala
Also increase MAX AH to 512. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Add support for fast register work requests (FRWR)Naresh Gottumukkala
Also get the max_srq value from query_config mailbox response. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-09-02RDMA/ocrdma: Create IRD queue fixNaresh Gottumukkala
1) Fix ocrdma_get_num_posted_shift for upto 128 QPs. 2) Create for min of dev->max_wqe and requested wqe in create_qp. 3) As part of creating ird queue, populate with basic header templates. 4) Make sure all the DB memory allocated to userspace are page aligned. 5) Fix issue in checking the mmap local cache. 6) Some code cleanup. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-28IB/mlx4: Add receive flow steering supportHadar Hen Zion
Implement ib_create_flow() and ib_destroy_flow(). Translate the verbs structures provided by the user to HW structures and call the MLX4_QP_FLOW_STEERING_ATTACH/DETACH firmware commands. On the ATTACH command completion, the firmware provides a 64-bit registration ID, which is placed into struct mlx4_ib_flow that wraps the instance of struct ib_flow which is retuned to caller. Later, this reg ID is used for detaching that flow from the firmware. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-20treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacksJoe Perches
Don't emit OOM warnings when k.alloc calls fail when there there is a v.alloc immediately afterwards. Converted a kmalloc/vmalloc with memset to kzalloc/vzalloc. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-08-13RDMA/cxgb4: Issue RI.FINI before closing when entering TERMSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-13RDMA/cxgb4: Advertise ~0ULL as max MR sizeSteve Wise
Lustre uses a advertised max MR size of ~0ULL to indicate it should use a dma_mr. Hence advertise max MR size as ~0ULL. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-13RDMA/cxgb4: Always do GTS write if cidx_inc == CIDXINC_MASKSteve Wise
When polling, we do a GTS update if the accumulated cidx_inc == the CQ depth / 16. However, if the CQ is large enough, Cq depth / 16 exceeds the size of the field in the GTS word. So we also need to update if cidx_inc hits CIDXINC_MASK to avoid overflowing the field. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-13RDMA/cxgb4: Set arp error handler for PASS_ACCEPT_RPL messagesSteve Wise
accept_cr() failed to set the arp error handler on a reused skb. This results in a kernel crash if the arp does indeed time out. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-13RDMA/cxgb4: Fix accounting for unsignaled SQ WRs to deal with wrapSteve Wise
When determining how many WRs are completed with a signaled CQE, correctly deal with queue wraps. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-13RDMA/cxgb4: Fix QP flush logicSteve Wise
This patch makes following fixes in QP flush logic: - correctly flushes unsignaled WRs followed by a signaled WR - supports for flushing a CQ bound to multiple QPs - resets cidx_flush if a active queue starts getting HW CQEs again - marks WQ in error when we leave RTS. This was only being done for user queues, but we need it for kernel queues too so that post_send/post_recv will start returning the appropriate error synchronously - eats unsignaled read resp CQEs. HW always inserts CQEs so we must silently discard them if the read work request was unsignaled. - handles QP flushes with pending SW CQEs. The flush and out of order completion logic has a bug where if out of order completions are flushed but not yet polled by the consumer and the qp is then flushed then we end up inserting duplicate completions. - c4iw_flush_sq() should only flush wrs that have not already been flushed. Since we already track where in the SQ we've flushed via sq.cidx_flush, just start at that point and flush any remaining. This bug only caused a problem in the presence of unsignaled work requests. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> [ Fixed sparse warning due to htonl/ntohl confusion. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-13RDMA/cxgb4: Handle newer firmware changesSteve Wise
Move QP to TERMINATE instead to allow the peer to get the TERM message. This bug wasn't detectable until newer FW that moves connections out of RDMA mode as soon as an error is detected. QP can exit RTS before the last AE arrives. This was introduced by changes in the FW to kick connections out of RDMA mode as soon as an error is detected. A side effect of this is that the driver can move the QP out of RTS before the AE causing the connection to get kicked out of RDMA mode is processed. Fix for this is to always post async errors even if the QP is out of RTS. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-13RDMA/cxgb4: Use correct bit shift macros for vlan filter tuplesSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-13RDMA/cxgb4: Add support for active and passive open connection with IPv6 addressVipul Pandya
Add new cpl messages, cpl_act_open_req6 and cpl_t5_act_open_req6, for initiating active open connections. Use LLD api cxgb4_create_server and cxgb4_create_server6 for initiating passive open connections. Similarly use cxgb4_remove_server to remove the passive open connections in place of listen_stop. Add support for iWARP over VLAN device and enable IPv6 support on VLAN device. Make use of import_ep in c4iw_reconnect. Signed-off-by: Vipul Pandya <vipul@chelsio.com> [ Fix build when IPv6 is disabled and make sure iw_cxgb4 is not built-in when ipv6 is a module. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-13IB/qib: Clean up unnecessary MSI/MSI-X capability findYijing Wang
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device drivers should use pci_dev->msi_cap/msix_cap to determine whether a device supports MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-13IB/qib: Make qib_driver staticPaul Bolle
struct pci_driver qib_driver is only used in qib_init.c. Remove it from qib.h and make it static in qib_init.c. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-13IB/qib: Improve SDMA performanceCQ Tang
1. The code accepts chunks of messages, and splits the chunk into packets when converting packets into sdma queue entries. Adjacent packets will use user buffer pages smartly to avoid pinning the same page multiple times. 2. Instead of discarding all the work when SDMA queue is full, the work is saved in a pending queue. Whenever there are enough SDMA queue free entries, pending queue is directly put onto SDMA queue. 3. An interrupt handler is used to progress this pending queue. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: CQ Tang <cq.tang@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> [ Fixed up sparse warnings. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-12RDMA/cma: Add IPv6 support for iWARPSteve Wise
Modify the type of local_addr and remote_addr fields in struct iw_cm_id from struct sockaddr_in to struct sockaddr_storage to hold IPv6 and IPv4 addresses uniformly. Change the references of local_addr and remote_addr in cxgb4, cxgb3, nes and amso drivers to match this. However to be able to actully run traffic over IPv6, low-level drivers have to add code to support this. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> [ Fix unused variable warnings when INFINIBAND_NES_DEBUG not set. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-12RDMA/ocrdma: Cache recv DB until QP moved to RTRNaresh Gottumukkala
1) In post recv, don't ring the DB doorbell if the QP is in RTR state. Cache the DB calls, until the QP is moved to RTS state. 2) Add max_rd_sge support to dev->attr. 3) Code cleanup in alloc_pd path. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-12RDMA/ocrdma: Remove __packedNaresh Gottumukkala
1) Remove __packed for structures. 2) Align and pad all ABI structure to 64 bit boundaries instead of using __packed. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-12RDMA/ocrdma: Remove driver QP state machineNaresh Gottumukkala
Remove QP state machine in ocrdma low-level driver and use on the core IB stack's instead. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-12RDMA/ocrdma: Don't allow zero/invalid sgid usageNaresh Gottumukkala
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-12RDMA/ocrdma: Remove redundant dev referenceNaresh Gottumukkala
Remove redundant dev reference from structures: 1) ocrdma_cq. 2) ocrdma_ah. 3) ocrdma_hw_mr. 4) ocrdma_mw. 5) ocrdma_srq. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-12RDMA/ocrdma: Style and redundant code cleanupNaresh Gottumukkala
Code cleanup and remove redundant code: 1) redundant initialization removed 2) braces changed as per CodingStyle. 3) redundant checks removed 4) extra braces in return statements removed. 5) removed unused pd pointer from mr. 6) reorganized get_dma_mr() 7) fixed set_av() to return error on invalid sgid index. 8) reference to ocrdma_dev removed from struct ocrdma_pd. Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-31Merge branches 'cma', 'cxgb3', 'cxgb4', 'ipoib', 'misc', 'mlx4', 'mlx5', ↵Roland Dreier
'nes', 'ocrdma' and 'qib' into for-next
2013-07-31mlx5_core: Variable may be used uninitializedAndi Shyti
In the sq_overhead() function, if qp_typ is equal to IB_QPT_RC, size will be used uninitialized. Signed-off-by: Andi Shyti <andi@etezian.org> Acked-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-31IB/mlx5: Fix stack info leak in mlx5_ib_alloc_ucontext()Dan Carpenter
We don't set "resp.reserved". Since it's at the end of the struct that means we don't have to copy it to the user. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-31IB/mlx5: Fix error return code in init_one()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-31IB/mlx4: Use default pkey when creating tunnel QPsJack Morgenstein
When creating tunnel QPs for special QP tunneling, look for the default pkey in the slave's virtual pkey table. If it is present, use the real pkey index where the default pkey is located. If the default pkey is not found in the pkey table, use the real pkey index which is stored at index 0 in the slave's virtual pkey table (this is the current behavior). This change is required to support cloud computing, where the paravirtualized index of the default pkey is moved to index 1 or higher. The pkey at paravirtualized index 0 is used for the default IPoIB interface created by the VF. Its possible for the pkey value at paravirtualized index 0 to be invalid (zero) at VF probe time (pkey index 0 is mapped to real pkey index 127, which contains pkey = 0). At some point after the VF probe, the cloud computing interface at the hypervisor maps virtual index 0 for the VF to the pkey index containing the pkey that IPoIB will use in its operation. However, when the tunnel QP is created, the pkey at the slave's virtual index 0 is still mapped to the invalid pkey index, so tunnel QP creation fails. This commit causes the hypervisor to search for the default pkey in the slave's pkey table -- and this pkey is present in the table (at index > 0) at tunnel QP creation time, so that the tunnel QP creation will succeed. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-30Revert "RDMA/nes: Fix compilation error when nes_debug is enabled"Roland Dreier
This reverts commit bca1935ccdec, which removes variables nes_tcp_state_str and nes_iwarp_state_str, assuming that they aren't defined. However, they are defined within a #ifdef NES_DEBUG statement, which if enabled causes "defined but not used" compiler warning, when the variables are removed. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-30IB/qib: Add err_decode() call for ring dumpMike Marciniszyn
Commit 0b3ddf380ca7 ("Log all SDMA errors unconditionally") missed part of the patch. This also corrects a format warning when dma_addr_t is 32 bits on a 64 bit system. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-30RDMA/cxgb3: Fix stack info leak in iwch_create_cq()Dan Carpenter
The "uresp.reserved" field isn't initialized on this path so it could leak uninitialized stack information to the user. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-30RDMA/nes: Fix info leaks in nes_create_qp() and nes_create_cq()Dan Carpenter
We pass a few bytes of uninitialized stack memory to the user here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-30RDMA/ocrdma: Fix several stack info leaksDan Carpenter
A grab bag of places which don't properly initialize stack data. I removed one place which cleared ".rsvd" because it's not needed now that I have added a memset() earlier in the function. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-30RDMA/cxgb4: Fix stack info leak in c4iw_create_qp()Dan Carpenter
"uresp.ma_sync_key" doesn't get set on this path so we leak 8 bytes of data. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 21:41:10 +0000