summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw
AgeCommit message (Collapse)Author
2017-02-25Merge tag 'for-next-dma_ops' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma DMA mapping updates from Doug Ledford: "Drop IB DMA mapping code and use core DMA code instead. Bart Van Assche noted that the ib DMA mapping code was significantly similar enough to the core DMA mapping code that with a few changes it was possible to remove the IB DMA mapping code entirely and switch the RDMA stack to use the core DMA mapping code. This resulted in a nice set of cleanups, but touched the entire tree and has been kept separate for that reason." * tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it IB/core: Remove ib_device.dma_device nvme-rdma: Switch from dma_device to dev.parent RDS: net: Switch from dma_device to dev.parent IB/srpt: Modify a debug statement IB/srp: Switch from dma_device to dev.parent IB/iser: Switch from dma_device to dev.parent IB/IPoIB: Switch from dma_device to dev.parent IB/rxe: Switch from dma_device to dev.parent IB/vmw_pvrdma: Switch from dma_device to dev.parent IB/usnic: Switch from dma_device to dev.parent IB/qib: Switch from dma_device to dev.parent IB/qedr: Switch from dma_device to dev.parent IB/ocrdma: Switch from dma_device to dev.parent IB/nes: Remove a superfluous assignment statement IB/mthca: Switch from dma_device to dev.parent IB/mlx5: Switch from dma_device to dev.parent IB/mlx4: Switch from dma_device to dev.parent IB/i40iw: Remove a superfluous assignment statement IB/hns: Switch from dma_device to dev.parent ...
2017-02-24mm, fs: reduce fault, page_mkwrite, and pfn_mkwrite to take only vmfDave Jiang
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to take a vma and vmf parameter when the vma already resides in vmf. Remove the vma parameter to simplify things. [arnd@arndb.de: fix ARM build] Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull Mellanox rdma updates from Doug Ledford: "Mellanox specific updates for 4.11 merge window Because the Mellanox code required being based on a net-next tree, I keept it separate from the remainder of the RDMA stack submission that is based on 4.10-rc3. This branch contains: - Various mlx4 and mlx5 fixes and minor changes - Support for adding a tag match rule to flow specs - Support for cvlan offload operation for raw ethernet QPs - A change to the core IB code to recognize raw eth capabilities and enumerate them (touches non-Mellanox code) - Implicit On-Demand Paging memory registration support" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (40 commits) IB/mlx5: Fix configuration of port capabilities IB/mlx4: Take source GID by index from HW GID table IB/mlx5: Fix blue flame buffer size calculation IB/mlx4: Remove unused variable from function declaration IB: Query ports via the core instead of direct into the driver IB: Add protocol for USNIC IB/mlx4: Support raw packet protocol IB/mlx5: Support raw packet protocol IB/core: Add raw packet protocol IB/mlx5: Add implicit MR support IB/mlx5: Expose MR cache for mlx5_ib IB/mlx5: Add null_mkey access IB/umem: Indicate that process is being terminated IB/umem: Update on demand page (ODP) support IB/core: Add implicit MR flag IB/mlx5: Support creation of a WQ with scatter FCS offload IB/mlx5: Enable QP creation with cvlan offload IB/mlx5: Enable WQ creation and modification with cvlan offload IB/mlx5: Expose vlan offloads capabilities IB/uverbs: Enable QP creation with cvlan offload ...
2017-02-23Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "First set of updates for 4.11 kernel merge window - Add new Broadcom bnxt_re RoCE driver - rxe driver updates - ioctl cleanups - ETH_P_IBOE declaration cleanup - IPoIB changes - Add port state cache - Allow srpt driver to accept guids as port names in config - Update to hfi1 driver - Update to srp driver - Lots of misc minor changes all over" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (114 commits) RDMA/bnxt_re: fix for "bnxt_en: Update to firmware interface spec 1.7.0." rdma_cm: fail iwarp accepts w/o connection params IB/srp: Drain the send queue before destroying a QP IB/core: Add support for draining IB_POLL_DIRECT completion queues IB/srp: Improve an error path IB/srp: Make a diagnostic message more informative IB/srp: Document locking conventions IB/srp: Fix race conditions related to task management IB/srp: Avoid that duplicate responses trigger a kernel bug IB/SRP: Avoid using IB_MR_TYPE_SG_GAPS RDMA/qedr: Fix some error handling RDMA/bnxt_re: add DCB dependency IB/hns: include linux/module.h IB/vmw_pvrdma: Expose vendor error to ULPs vmw_pvrdma: switch to pci_alloc_irq_vectors IB/hfi1: use size_t for passing array length IB/ipoib: Remove redudant label IB/ipoib: remove the unnecessary memory free IB/mthca: switch to pci_alloc_irq_vectors IB/hfi1: Code reuse with memdup_copy ...
2017-02-22RDMA/bnxt_re: fix for "bnxt_en: Update to firmware interface spec 1.7.0."Stephen Rothwell
When the firmware interface spec was updated, a constant element was renamed. The rename missed the instances in the bnxt_re driver because it wasn't upstream yet. This updates the bnxt_re driver with the rename. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini Varadhan. 2) Simplify classifier state on sk_buff in order to shrink it a bit. From Willem de Bruijn. 3) Introduce SIPHASH and it's usage for secure sequence numbers and syncookies. From Jason A. Donenfeld. 4) Reduce CPU usage for ICMP replies we are going to limit or suppress, from Jesper Dangaard Brouer. 5) Introduce Shared Memory Communications socket layer, from Ursula Braun. 6) Add RACK loss detection and allow it to actually trigger fast recovery instead of just assisting after other algorithms have triggered it. From Yuchung Cheng. 7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot. 8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert. 9) Export MPLS packet stats via netlink, from Robert Shearman. 10) Significantly improve inet port bind conflict handling, especially when an application is restarted and changes it's setting of reuseport. From Josef Bacik. 11) Implement TX batching in vhost_net, from Jason Wang. 12) Extend the dummy device so that VF (virtual function) features, such as configuration, can be more easily tested. From Phil Sutter. 13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric Dumazet. 14) Add new bpf MAP, implementing a longest prefix match trie. From Daniel Mack. 15) Packet sample offloading support in mlxsw driver, from Yotam Gigi. 16) Add new aquantia driver, from David VomLehn. 17) Add bpf tracepoints, from Daniel Borkmann. 18) Add support for port mirroring to b53 and bcm_sf2 drivers, from Florian Fainelli. 19) Remove custom busy polling in many drivers, it is done in the core networking since 4.5 times. From Eric Dumazet. 20) Support XDP adjust_head in virtio_net, from John Fastabend. 21) Fix several major holes in neighbour entry confirmation, from Julian Anastasov. 22) Add XDP support to bnxt_en driver, from Michael Chan. 23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan. 24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi. 25) Support GRO in IPSEC protocols, from Steffen Klassert" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits) Revert "ath10k: Search SMBIOS for OEM board file extension" net: socket: fix recvmmsg not returning error from sock_error bnxt_en: use eth_hw_addr_random() bpf: fix unlocking of jited image when module ronx not set arch: add ARCH_HAS_SET_MEMORY config net: napi_watchdog() can use napi_schedule_irqoff() tcp: Revert "tcp: tcp_probe: use spin_lock_bh()" net/hsr: use eth_hw_addr_random() net: mvpp2: enable building on 64-bit platforms net: mvpp2: switch to build_skb() in the RX path net: mvpp2: simplify MVPP2_PRS_RI_* definitions net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT net: mvpp2: remove unused register definitions net: mvpp2: simplify mvpp2_bm_bufs_add() net: mvpp2: drop useless fields in mvpp2_bm_pool and related code net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue' net: mvpp2: release reference to txq_cpu[] entry after unmapping net: mvpp2: handle too large value in mvpp2_rx_time_coal_set() net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set() net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set ...
2017-02-20Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The main changes in this cycle were: - Implement wraparound-safe refcount_t and kref_t types based on generic atomic primitives (Peter Zijlstra) - Improve and fix the ww_mutex code (Nicolai Hähnle) - Add self-tests to the ww_mutex code (Chris Wilson) - Optimize percpu-rwsems with the 'rcuwait' mechanism (Davidlohr Bueso) - Micro-optimize the current-task logic all around the core kernel (Davidlohr Bueso) - Tidy up after recent optimizations: remove stale code and APIs, clean up the code (Waiman Long) - ... plus misc fixes, updates and cleanups" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits) fork: Fix task_struct alignment locking/spinlock/debug: Remove spinlock lockup detection code lockdep: Fix incorrect condition to print bug msgs for MAX_LOCKDEP_CHAIN_HLOCKS lkdtm: Convert to refcount_t testing kref: Implement 'struct kref' using refcount_t refcount_t: Introduce a special purpose refcount type sched/wake_q: Clarify queue reinit comment sched/wait, rcuwait: Fix typo in comment locking/mutex: Fix lockdep_assert_held() fail locking/rtmutex: Flip unlikely() branch to likely() in __rt_mutex_slowlock() locking/rwsem: Reinit wake_q after use locking/rwsem: Remove unnecessary atomic_long_t casts jump_labels: Move header guard #endif down where it belongs locking/atomic, kref: Implement kref_put_lock() locking/ww_mutex: Turn off __must_check for now locking/atomic, kref: Avoid more abuse locking/atomic, kref: Use kref_get_unless_zero() more locking/atomic, kref: Kill kref_sub() locking/atomic, kref: Add kref_read() locking/atomic, kref: Add KREF_INIT() ...
2017-02-19RDMA/qedr: Fix some error handlingChristophe Jaillet
'qedr_alloc_pbl_tbl()' can not return NULL. In qedr_init_user_queue(): - simplify the test for the return value, no need to test for NULL - propagate the error pointer if needed, otherwise 0 (success) is returned. This is spurious. In init_mr_info(): - test the return value with IS_ERR - propagate the error pointer if needed instead of an exlictit -ENOMEM. This is a no-op as the only error pointer that we can have here is already -ENOMEM Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19RDMA/bnxt_re: add DCB dependencyArnd Bergmann
When CONFIG_DCB is disabled, we get a link error: drivers/infiniband/built-in.o: In function `bnxt_re_setup_qos': trace.c:(.text+0x155774): undefined reference to `dcb_ieee_getapp_mask' trace.c:(.text+0x155774): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `dcb_ieee_getapp_mask' trace.c:(.text+0x155794): undefined reference to `dcb_ieee_getapp_mask' trace.c:(.text+0x155794): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `dcb_ieee_getapp_mask' Like the other drivers that use this function, a Kconfig dependency is the correct fix. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hns: include linux/module.hArnd Bergmann
I ran into a build error on arm64 randconfig testing: infiniband/hw/hns/hns_roce_main.c:539:1: error: data definition has no type or storage class [-Werror] infiniband/hw/hns/hns_roce_main.c:539:1: error: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE' [-Werror=implicit-int] infiniband/hw/hns/hns_roce_main.c:539:1: error: parameter names (without types) in function declaration [-Werror] infiniband/hw/hns/hns_roce_main.c:979:226: error: data definition has no type or storage class [-Werror] infiniband/hw/hns/hns_roce_main.c:979:226: error: type defaults to 'int' in declaration of 'module_init' [-Werror=implicit-int] infiniband/hw/hns/hns_roce_main.c:979:1: error: parameter names (without types) in function declaration [-Werror] Including the module.h makes it build again. Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/vmw_pvrdma: Expose vendor error to ULPsYuval Shaia
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Acked-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19vmw_pvrdma: switch to pci_alloc_irq_vectorsChristoph Hellwig
.. and greatly clean up the irq handling boilerplate code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1: use size_t for passing array lengthArnd Bergmann
gcc-7 produces a mysterious warning about the size argument being potentially out of range: drivers/infiniband/hw/hfi1/verbs.c: In function 'init_cntr_names': drivers/infiniband/hw/hfi1/verbs.c:1644:2: error: 'memcpy': specified size between 18446744071562067968 and 18446744073709551615 exceeds maximum object size 9223372036854775807 [-Werror=stringop-overflow=] This seems to refer to a the case where an 64-bit size_t gets truncated into a negative 'int' and subsequently turned into a high 64-bit number again. The fix is clearly to use size_t here, which matches the type that gets used for this value elsewhere. Fixes: b7481944b06e ("IB/hfi1: Show statistics counters under IB stats interface") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/mthca: switch to pci_alloc_irq_vectorsChristoph Hellwig
Trivial switch to the new API for this driver. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1: Code reuse with memdup_copyMichael J. Ruhl
Update several usages of kmalloc/user_copy to memdup_copy and memdup_copy_nul. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1, qib, rdmavt: Move AETH defines to rdma/ib_hdrs.hDon Hiatt
Rename RVT AETH defines and export in rdma/ib_hdrs.h Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1: Do not set physical link state if DC is in the shutdown stateMichael J. Ruhl
If the DC is in shutdown state, the set link state function will return an error. Since this is not a failure in this state, make sure to only call set link state if the DC is on. Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1: Modify logging frequency of DCC errorsJakub Byczkowski
Use rate-limit state to limit number of messages logged to kernel message buffer for DCC errors. Add new macro dd_dev_info_ratelimited for that propose. Replace all dd_dev_info calls in handle_dcc_err function with rate-limited version. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/rdmavt, IB/hfi1, IB/qib: Correct ack count for passive (RTR) QPsMike Marciniszyn
The send complete for RC QPs mismanages the ack count when the responder side is only in RTR. A QP in that state cannot send requests, but it can be the target for operations that elicit responses. Adjust the RC completion logic to correct the count maintenance by reflecting RECV_OK in a new state test. Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/qib: Updates to use rdmavt's SGE helper routinesBrian Welty
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1, rdmavt: Move SGE state helper routines into rdmavtBrian Welty
To improve code reuse, add small SGE state helper routines to rdmavt_mr.h. Leverage these in hfi1, including refactoring of hfi1_copy_sge. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1, rdmavt: Update copy_sge to use boolean argumentsBrian Welty
Convert copy_sge and related SGE state functions to use boolean. For determining if QP is in user mode, add helper function in rdmavt_qp.h. This is used to determine if QP needs the last byte ordering. While here, change rvt_pd.user to a boolean. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/qib: Use new rdmavt timersVenkata Sandeep Dhanalakota
Reduce qib code footprint by using the rdmavt timers. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1: Use new rdmavt timersVenkata Sandeep Dhanalakota
Reduce hfi1 code footprint by using the rdmavt timers. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1, qib, rdmavt: Move AETH credit functions into rdmavtBrian Welty
Add rvt_compute_aeth() and rvt_get_credit() as shared functions in rdmavt, moved from hfi1/qib logic. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1, qib, rdmavt: Move two IB event functions into rdmavtBrian Welty
Add rvt_rc_error() and rvt_comm_est() as shared functions in rdmavt, moved from hfi1/qib logic. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1: Check upper-case EFI variablesSebastian Sanchez
The EFI variable that provides board ID is named by the PCI address of the device, which is published in upper-case, while the HFI1 driver reads the EFI variable in lower-case. This prevents returning the correct board id when queried through sysfs. Read EFI variables in upper-case if the lower-case read fails. Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1: Reduce oversized fields in struct hfi1_packetSebastian Sanchez
Some fields in struct hfi1_packet are oversized. Reduce them. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1: Add additional fields to qp_statsMike Marciniszyn
The r_psn and s_rnr_retry are missing. Add with this patch. Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1: Allocate context data on memory nodeSebastian Sanchez
There are some memory allocation calls in hfi1_create_ctxtdata() that do not use the numa function parameter. This can cause cache lines to be filled over QPI. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1: Access hfi1_ibport through rcd pointerSebastian Sanchez
Receive code paths use the QP's device and port number to access the struct hfi1_ibport. When an instance of struct hfi1_ctxtdata is present, it can be used to access struct hfi1_ibport through a pointer. This makes struct hfi1_ibport lookup time faster as an array doesn't have to be indexed and access fields in other cache-lines. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1: Correct error calldown lockingMike Marciniszyn
The resource specific wait locking missed correcting the lock for the notify_error_qp() calldown. The code is fixed to correctly use the iowait lock field to protect the head that is protected by that lock. Fixes: Commit 4e045572e2c2 ("IB/hfi1: Add unique txwait_lock for txreq events") Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1: Use static CTLE with Preset 6 for integrated HFIsEaswar Hariharan
After extended testing, it was found that the previous PCIe Gen 3 recipe, which used adaptive CTLE with Preset 4, could cause an NMI/Surprise Link Down in about 1 in 100 to 1 in 1000 power cycles on some platforms. New EV data combined with extensive empirical data indicates that the new recipe should use static CTLE with Preset 6 for all integrated silicon SKUs. Fixes: c3f8de0b334c ("IB/hfi1: Add static PCIe Gen3 CTLE tuning") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1: Ensure read of producer s_head is correctMike Marciniszyn
The read of s_head in the hfi1_make_rc_req() and qib_make_rc_req() lack the necesary barrier instuctions. Correct other ACCESS_ONCE() warnings in the same file. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1: Process qp wait list in IRQ thread periodicallyMike Marciniszyn
In the event that the IRQ thread is extremely busy, the processing of an rcd wait list can be delayed by quite a bit until the IRQ thread completes its work. The QP reset reference count wait can then appear to be stuck, thus causing up a QP destroy to emit the hung task diagnostic. Fix by processing the qp wait list periodically from the thread. The interval is a multiple (currently 4) of the MAX_PKT_RECV. Also, reduce some of the excessive inlining. The guidelines are per packet is ok inline, otherwise the choice is based on likelyhood of execution. Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1: Correct defered count after processing qp_wait_listMike Marciniszyn
The qp_wait_list processing leaves the defered ack count at its prior value. This can result in a premature send of an ack. Fixed by unconditionally reseting the defered ack count in hfi1_send_rc_ack(). Fixes: Commit 7c091e5c0685 ("staging/rdma/hfi1: add ACK coalescing logic") Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19iw_cxgb4: clean up send_connect()Ganesh Goudar
Clean up send_connect() and make use of t6 specific active open request struct. Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Bharat Teja <bharat@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19Merge branch 'k.o/for-4.10-rc' into HEADDoug Ledford
2017-02-15IB/mlx5: Fix configuration of port capabilitiesEli Cohen
When the "ib_virt" cap is set, configuration of port capabilities need to be done through mlx5_core_modify_hca_vport_context. Since modify_hca_vport_context accepts mask and value, there is no need to read the port capabilities and calculate the new cap values so we avoid the mutex when ib_virt is set. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx4: Take source GID by index from HW GID tableTalat Batheesh
Previously, we used the HW GID index in order to search the source GID in the software GID cached table. In some cases, for example when the MAC Address of the network interface is changed, the GID cached table saves the old-IPv6-link-local GID at the end of the table. When returning the old MAC address, the software GID cached table tries to add the new IPv6-link-local GID, and when it identifies that the GID already exists, the software GID cached does not add it. Thus a mismatch occurs between the HW and the SW GID tables. It resulted with sending traffic with the wrong source GID. This commit fixes the issue by taking both from the HW table. The problem can be reproduced with the following scenario: Client: # ifconfig ens6 2.2.2.5 # ifconfig ens6 inet6 add 2001:0db8:0:f101::5/64 # ifconfig ens6 hw ether f4:52:14:61:a0:71 # ifconfig ens6 inet6 del 2001:0db8:0:f101::5/64 # ifconfig ens6 inet6 add 2001:0db8:0:f101::5/64 # ucmatose -f ipv6 -b 2001:0db8:0:f101::5 -s 2001:0db8:0:f101::6 -p 20156 Server: # ucmatose -f ipv6 -b 2001:0db8:0:f101::6 -p 20156 Fixes: 4c3eb3ca1396 ('IB/mlx4: Add VLAN support for IBoE') Signed-off-by: Talat Batheesh <talatb@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Fix blue flame buffer size calculationEli Cohen
A blue flame register is comprised of two buffers of equal size. Fixes: 5fe9dec0d0454 ("IB/mlx5: Use blue flame register allocator in mlx5_ib") Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx4: Remove unused variable from function declarationLeon Romanovsky
Remove unused netw_view parameter from eth_link_query_port() function. Reported-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB: Query ports via the core instead of direct into the driverOr Gerlitz
Change the drivers to call ib_query_port in their get port immutable handler instead of their own query port handler. Doing this required to set the core cap flags of this device before the ib_query_port call is made, since the IB core might need these caps to serve the port query. Drivers are ensured by the IB core that the port attributes passed to the port query verb implementation are zero, and hence we removed the zeroing from the drivers. This patch doesn't add any new functionality. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Acked-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB: Add protocol for USNICOr Gerlitz
Add protocol definition for the proprietary the USNIC driver. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx4: Support raw packet protocolOr Gerlitz
Mark support for the new raw packet protocol on Eth ports. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Support raw packet protocolOr Gerlitz
Mark support for the new raw packet protocol on Eth ports. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Add implicit MR supportArtemy Kovalyov
Add implicit MR, covering entire user address space. The MR is implemented as an indirect KSM MR consisting of 1GB direct MRs. Pages and direct MRs are added/removed to MR by ODP. Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Expose MR cache for mlx5_ibArtemy Kovalyov
Allow other parts of mlx5_ib to use MR cache mechanism. * Add new functions mlx5_mr_cache_alloc and mlx5_mr_cache_free * Traditional MTT MKey buckets are limited by MAX_UMR_CACHE_ENTRY Additinal buckets may be added above. Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Add null_mkey accessArtemy Kovalyov
Add mlx5_cmd_null_mkey() function to access null_mkey information from firmware. Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-14IB/mlx5: Support creation of a WQ with scatter FCS offloadNoa Osherovich
Add support for creation of a WQ with scatter FCS capability, if this capability is supported by the hardware. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 12:35:45 +0000