summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/mthca/mthca_mad.c
AgeCommit message (Collapse)Author
2019-11-12RDMA: Change MAD processing function to remove extra casting and parameterLeon Romanovsky
All users of process_mad() converts input pointers from ib_mad_hdr to be ib_mad, update the function declaration to use ib_mad directly. Also remove not used input MAD size parameter. Link: https://lore.kernel.org/r/20191029062745.7932-17-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Tested-By: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-06RDMA/mad: Do not check MAD sizes in roce and ib driversLeon Romanovsky
All callers for process_mad allocate MAD structures with proper sizes, there is no need to recheck it. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-19RDMA: Mark if destroy address handle is in a sleepable contextGal Pressman
Introduce a 'flags' field to destroy address handle callback and add a flag that marks whether the callback is executed in an atomic context or not. This will allow drivers to wait for completion instead of polling for it when it is allowed. Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-19RDMA: Mark if create address handle is in a sleepable contextGal Pressman
Introduce a 'flags' field to create address handle callback and add a flag that marks whether the callback is executed in an atomic context or not. This will allow drivers to wait for completion instead of polling for it when it is allowed. Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-26RDMA/drivers: Use dev_err/dbg/etc instead of pr_* + ibdev->nameJason Gunthorpe
Kernel convention is that a driver for a subsystem will print using dev_* on the subsystem's struct device, or with dev_* on the physical device. Drivers should rarely use a pr_* function. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-08-18Add OPA extended LID supportHiatt, Don
This patch series primarily increases sizes of variables that hold lid values from 16 to 32 bits. Additionally, it adds a check in the IB mad stack to verify a properly formatted MAD when OPA extended LIDs are used. Signed-off-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-08IB/core: Change wc.slid from 16 to 32 bitsHiatt, Don
slid field in struct ib_wc is increased to 32 bits. This enables core components to use larger LIDs if needed. The user ABI is unchanged and return 16 bit values when queried. Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-08IB/core: Change port_attr.lid size from 16 to 32 bitsDasaratharaman Chandramouli
lid field in struct ib_port_attr is increased to 32 bits. This enables core components to use larger LIDs if needed. The user ABI is unchanged and return 16 bit values when queried. Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-01IB/core: Define 'ib' and 'roce' rdma_ah_attr typesDasaratharaman Chandramouli
rdma_ah_attr can now be either ib or roce allowing core components to use one type or the other and also to define attributes unique to a specific type. struct ib_ah is also initialized with the type when its first created. This ensures that calls such as modify_ah dont modify the type of the address handle attribute. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-01IB/core: Use rdma_ah_attr accessor functionsDasaratharaman Chandramouli
Modify core and driver components to use accessor functions introduced to access individual fields of rdma_ah_attr Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-01IB/core: Rename ib_destroy_ah to rdma_destroy_ahDasaratharaman Chandramouli
Rename ib_destroy_ah to rdma_destroy_ah so its in sync with the rename of the ib address handle attribute Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-01IB/core: Rename ib_create_ah to rdma_create_ahDasaratharaman Chandramouli
Rename ib_create_ah to rdma_create_ah so its in sync with the rename of the ib address handle attribute Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-01IB/core: Rename struct ib_ah_attr to rdma_ah_attrDasaratharaman Chandramouli
This patch simply renames struct ib_ah_attr to rdma_ah_attr as these fields specify attributes that are not necessarily specific to IB. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-07IB/{core,hw}: Add constant for node_descYuval Shaia
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mad: Remove improper use of BUG_ONIra Weiny
We recently added BUG_ON's which were inappropriate for a condition which should never happen. Change these to be WARN_ON_ONCE as a debugging aid. Fixes: 4cd7c9479aff ('IB/mad: Add support for additional MAD info to/from drivers') Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/mad: Add support for additional MAD info to/from driversIra Weiny
In order to support alternate sized MADs (and variable sized MADs on OPA devices) add in/out MAD size parameters to the process_mad core call. In addition, add an out_mad_pkey_index to communicate the pkey index the driver wishes the MAD stack to use when sending OPA MAD responses. The out MAD size and the out MAD PKey index are required by the MAD stack to generate responses on OPA devices. Furthermore, the in and out MAD parameters are made generic by specifying them as ib_mad_hdr rather than ib_mad. Drivers are modified as needed and are protected by BUG_ON flags if the MAD sizes passed to them is incorrect. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/mad: Support alternate Base Versions when creating MADsIra Weiny
In preparation to support the new OPA MAD Base version, add a base version parameter to ib_create_send_mad and set it to IB_MGMT_BASE_VERSION for current users. Definition of the new base version and it's processing will occur in later patches. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-02IB/core cleanup: Add const on args - device->process_madIra Weiny
The process_mad device function declares some parameters as "in". Make those parameters const and adjust the call tree under process_mad in the various drivers accordingly. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2014-08-10IB/mad: add new ioctl to ABI to support new registration optionsIra Weiny
Registrations options are specified through flags. Definitions of flags will be in subsequent patches. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-07-15IB/mthca: Stop returning separate error and status from FW commandsGoldwyn Rodrigues
Instead of having firmware command functions return an error and also a status, leading to code like: err = mthca_FW_COMMAND(..., &status); if (err) goto out; if (status) { err = -E...; goto out; } all over the place, just handle the FW status inside the FW command handling code (the way mlx4 does it), so we can simply write: err = mthca_FW_COMMAND(...); if (err) goto out; In addition to simplifying the source code, this also saves a healthy chunk of text: add/remove: 0/0 grow/shrink: 10/88 up/down: 510/-3357 (-2847) function old new delta static.trans_table 324 584 +260 mthca_cmd_poll 352 477 +125 mthca_cmd_wait 511 567 +56 mthca_table_put 213 240 +27 mthca_cleanup_db_tab 372 387 +15 __mthca_remove_one 314 323 +9 mthca_cleanup_user_db_tab 275 283 +8 __mthca_init_one 1738 1746 +8 mthca_cleanup 20 21 +1 mthca_MAD_IFC 1081 1082 +1 mthca_MGID_HASH 43 40 -3 mthca_MAP_ICM_AUX 23 20 -3 mthca_MAP_ICM 19 16 -3 mthca_MAP_FA 23 20 -3 mthca_READ_MGM 43 38 -5 mthca_QUERY_SRQ 43 38 -5 mthca_QUERY_QP 59 54 -5 mthca_HW2SW_SRQ 43 38 -5 mthca_HW2SW_MPT 60 55 -5 mthca_HW2SW_EQ 43 38 -5 mthca_HW2SW_CQ 43 38 -5 mthca_free_icm_table 120 114 -6 mthca_query_srq 214 206 -8 mthca_free_qp 662 654 -8 mthca_cmd 38 28 -10 mthca_alloc_db 1321 1311 -10 mthca_setup_hca 1067 1055 -12 mthca_WRITE_MTT 35 22 -13 mthca_WRITE_MGM 40 27 -13 mthca_UNMAP_ICM_AUX 36 23 -13 mthca_UNMAP_FA 36 23 -13 mthca_SYS_DIS 36 23 -13 mthca_SYNC_TPT 36 23 -13 mthca_SW2HW_SRQ 35 22 -13 mthca_SW2HW_MPT 35 22 -13 mthca_SW2HW_EQ 35 22 -13 mthca_SW2HW_CQ 35 22 -13 mthca_RUN_FW 36 23 -13 mthca_DISABLE_LAM 36 23 -13 mthca_CLOSE_IB 36 23 -13 mthca_CLOSE_HCA 38 25 -13 mthca_ARM_SRQ 39 26 -13 mthca_free_icms 178 164 -14 mthca_QUERY_DDR 389 375 -14 mthca_resize_cq 1063 1048 -15 mthca_unmap_eq_icm 123 107 -16 mthca_map_eq_icm 396 380 -16 mthca_cmd_box 90 74 -16 mthca_SET_IB 433 417 -16 mthca_RESIZE_CQ 369 353 -16 mthca_MAP_ICM_page 240 224 -16 mthca_MAP_EQ 183 167 -16 mthca_INIT_IB 473 457 -16 mthca_INIT_HCA 745 729 -16 mthca_map_user_db 816 798 -18 mthca_SYS_EN 157 139 -18 mthca_cleanup_qp_table 78 59 -19 mthca_cleanup_eq_table 168 149 -19 mthca_UNMAP_ICM 143 121 -22 mthca_modify_srq 172 149 -23 mthca_unmap_fmr 198 174 -24 mthca_query_qp 814 790 -24 mthca_query_pkey 343 319 -24 mthca_SET_ICM_SIZE 34 10 -24 mthca_QUERY_DEV_LIM 1870 1846 -24 mthca_map_cmd 1130 1105 -25 mthca_ENABLE_LAM 401 375 -26 mthca_modify_port 247 220 -27 mthca_query_device 884 850 -34 mthca_NOP 75 41 -34 mthca_table_get 287 249 -38 mthca_init_qp_table 333 293 -40 mthca_MODIFY_QP 348 308 -40 mthca_close_hca 131 89 -42 mthca_free_eq 435 390 -45 mthca_query_port 755 705 -50 mthca_free_cq 581 528 -53 mthca_alloc_icm_table 578 524 -54 mthca_multicast_attach 1041 986 -55 mthca_init_hca 326 271 -55 mthca_query_gid 487 431 -56 mthca_free_srq 524 468 -56 mthca_free_mr 168 111 -57 mthca_create_eq 1560 1501 -59 mthca_multicast_detach 790 728 -62 mthca_write_mtt 918 854 -64 mthca_register_device 1406 1342 -64 mthca_fmr_alloc 947 883 -64 mthca_mr_alloc 652 582 -70 mthca_process_mad 1242 1164 -78 mthca_dev_lim 910 830 -80 find_mgm 482 400 -82 mthca_modify_qp 3852 3753 -99 mthca_init_cq 1281 1181 -100 mthca_alloc_srq 1719 1610 -109 mthca_init_eq_table 1807 1679 -128 mthca_init_tavor 761 491 -270 mthca_init_arbel 2617 2098 -519 Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
2011-01-10IB/mthca: Handle -ENOMEM in forward_trap()Dan Carpenter
ib_create_send_mad() can return ERR_PTR(-ENOMEM) here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-28IB/mthca: Fix dispatch of IB_EVENT_LID_CHANGE eventMoni Shoua
When snooping a PortInfo MAD, its client_reregister bit is checked. If the bit is ON then a CLIENT_REREGISTER event is dispatched, otherwise a LID_CHANGE event is dispatched. This way of decision ignores the cases where the MAD changes the LID along with an instruction to reregister (so a necessary LID_CHANGE event won't be dispatched) or the MAD is neither of these (and an unnecessary LID_CHANGE event will be dispatched). This causes problems at least with IPoIB, which will do a "light" flush on reregister, rather than the "heavy" flush required due to a LID change. Fix this by dispatching a CLIENT_REREGISTER event if the client_reregister bit is set, but also compare the LID in the MAD to the current LID. If and only if they are not identical then a LID_CHANGE event is dispatched. Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yossi Etigin <yosefe@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14RDMA: Remove subversion $Id tagsRoland Dreier
They don't get updated by git and so they're worse than useless. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/mthca: Formatting cleanupsRoland Dreier
Fix a few whitespace and other coding style problems. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29IB/mthca: Fix section mismatchesRoland Dreier
Commit b3b30f5e ("IB/mthca: Recover from catastrophic errors") introduced some section mismatch breakage, because the error recovery code tears down and reinitializes the device, which calls into lots of code originally marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Reported by Randy Dunlap <randy.dunlap@oracle.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/mthca: Fix lid used for sending trapsJack Morgenstein
The SM LID used to send traps to is incorrectly set to port LID. This is a regression from 2.6.17 -- after a PortInfo MAD is received, no traps are sent to the SM LID. The traps go to the loopback interface instead, and are dropped there. The SM LID should be taken from the sm_lid of the PortInfo response. The bug was introduced by commit 12bbb2b7be7f5564952ebe0196623e97464b8ac5: IB/mthca: Add client reregister event generation Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/mthca: Add client reregister event generationLeonid Arsh
Change the mthca snoop of MADs that set PortInfo to check if the SM has set the client reregister bit, and if it has, generate a client reregister event. If the bit is not set, just generate a LID change event as usual. Signed-off-by: Leonid Arsh <leonida@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-19IB/mthca: make a function staticAdrian Bunk
This patch makes the needlessly global mthca_update_rate() static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-10IB: simplify static rate encodingJack Morgenstein
Push translation of static rate to HCA format into low-level drivers, where it belongs. For static rate encoding, use encoding of rate field from IB standard PathRecord, with addition of value 0, for backwards compatibility with current usage. The changes are: - Add enum ib_rate to midlayer includes. - Get rid of static rate translation in IPoIB; just use static rate directly from Path and MulticastGroup records. - Update mthca driver to translate absolute static rate into the format used by hardware. This also fixes mthca's static rate handling for HCAs that are capable of 4X DDR. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-29IB/mthca: Fix section mismatch problemsRoland Dreier
Quite a few cleanup functions in mthca were marked as __devexit. However, they could also be called from error paths during initialization, so they cannot be marked that way. Just delete all of the incorrect annotations. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Add modify_device method to set node descriptionRoland Dreier
Add a modify_device method to mthca, which implements setting the node description. This makes the writable "node_desc" sysfs attribute work for Mellanox HCAs. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-30[PATCH] fix missing includesTim Schmielau
I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-25[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mappedSean Hefty
The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26[PATCH] IB: move include files to include/rdmaRoland Dreier
Move the InfiniBand headers from drivers/infiniband/include to include/rdma. This allows InfiniBand-using code to live elsewhere, and lets us remove the ugly EXTRA_CFLAGS include path from the InfiniBand Makefiles. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26[PATCH] IB: sparse endianness cleanupSean Hefty
Fix sparse warnings. Use __be* where appropriate. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26[PATCH] IB: Add copyright noticesRoland Dreier
Make some lawyers happy and add copyright notices for people who forgot to include them when they actually touched the code. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-06 11:58:18 +0000