summaryrefslogtreecommitdiff
path: root/drivers/infiniband/core/sysfs.c
AgeCommit message (Collapse)Author
2009-06-15infiniband: remove driver_data direct access of struct deviceGreg Kroah-Hartman
In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Cc: general@lists.openfabrics.org Cc: Roland Dreier <rolandd@cisco.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-04IB: Remove useless ibdev_is_alive() tests from sysfs codeRoland Dreier
Some attribute show functions test ibdev_is_alive() to make sure that it's OK to access device state. However, the sysfs attributes will not be registered until the device is fully initialized, and they'll be unregistered before anything is torn down, so ibdev_is_alive() doesn't do anything useful. Remove it. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-02-25IB: Remove sysfs files before unregistering deviceRoland Dreier
Move the ib_device_unregister_sysfs() call from ib_dealloc_device() to ib_unregister_device(). The old code allows device unregister to proceed even if some sysfs files are open, which leaves a window where userspace can open a file before a device is removed but then end up reading the file after the device is removed, which leads to various kernel crashes either because the device data structure is freed or because the low-level driver code is gone after module removal. By not returning from ib_unregister_device() until after all sysfs entries are removed, we make sure that data structures and/or module code is not freed until after all sysfs access is done. Reported-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-06infiniband: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-29net: replace %p6 with %pI6Harvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28infiniband: use %p6 for printing message idsHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14RDMA/core: Add iWARP protocol statistics attributes in sysfsSteve Wise
This patch adds a sysfs attribute group called "proto_stats" under /sys/class/infiniband/$device/ and populates this group with protocol statistics if they exist for a given device. Currently, only iWARP stats are defined, but the code is designed to allow InfiniBand protocol stats if they become available. These stats are per-device and more importantly -not- per port. Details: - Add union rdma_protocol_stats in ib_verbs.h. This union allows defining transport-specific stats. Currently only iwarp stats are defined. - Add struct iw_protocol_stats to define the current set of iwarp protocol stats. - Add new ib_device method called get_proto_stats() to return protocol statistics. - Add logic in core/sysfs.c to create iwarp protocol stats attributes if the device is an RNIC and has a get_proto_stats() method. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14RDMA: Remove subversion $Id tagsRoland Dreier
They don't get updated by git and so they're worse than useless. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-19IB: convert struct class_device to struct deviceTony Jones
This converts the main ib_device to use struct device instead of struct class_device as class_device is going away. Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-15IB: Fix return value in ib_device_register_sysfs()Li Zefan
If kobject_create_and_add() fails and returns NULL, the current code in ib_device_register_sysfs() does not set ret and hence returns 0. Set ret to -ENOMEM for this failure, so that the caller knows that ib_device_register_sysfs() actually failed. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-24Kobject: convert drivers/* from kobject_unregister() to kobject_put()Greg Kroah-Hartman
There is no need for kobject_unregister() anymore, thanks to Kay's kobject cleanup changes, so replace all instances of it with kobject_put(). Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24Kobject: change drivers/infiniband to use kobject_init_and_addGreg Kroah-Hartman
Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <mshefty@ichips.intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12Driver core: change add_uevent_var to use a structKay Sievers
This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (76 commits) IB: Update MAINTAINERS with Hal's new email address IB/mlx4: Implement query SRQ IB/mlx4: Implement query QP IB/cm: Send no match if a SIDR REQ does not match a listen IB/cm: Fix handling of duplicate SIDR REQs IB/cm: cm_msgs.h should include ib_cm.h IB/cm: Include HCA ACK delay in local ACK timeout IB/cm: Use spin_lock_irq() instead of spin_lock_irqsave() when possible IB/sa: Make sure SA queries use default P_Key IPoIB: Recycle loopback skbs instead of freeing and reallocating IB/mthca: Replace memset(<addr>, 0, PAGE_SIZE) with clear_page(<addr>) IPoIB/cm: Fix warning if IPV6 is not enabled IB/core: Take sizeof the correct pointer when calling kmalloc() IB/ehca: Improve latency by unlocking after triggering the hardware IB/ehca: Notify consumers of LID/PKEY/SM changes after nondisruptive events IB/ehca: Return QP pointer in poll_cq() IB/ehca: Change idr spinlocks into rwlocks IB/ehca: Refactor sync between completions and destroy_cq using atomic_t IB/ehca: Lock renaming, static initializers IB/ehca: Report RDMA atomic attributes in query_qp() ...
2007-07-11sysfs: kill unnecessary attribute->ownerTejun Heo
sysfs is now completely out of driver/module lifetime game. After deletion, a sysfs node doesn't access anything outside sysfs proper, so there's no reason to hold onto the attribute owners. Note that often the wrong modules were accounted for as owners leading to accessing removed modules. This patch kills now unnecessary attribute->owner. Note that with this change, userland holding a sysfs node does not prevent the backing module from being unloaded. For more info regarding lifetime rule cleanup, please read the following message. http://article.gmane.org/gmane.linux.kernel/510293 (tweaked by Greg to not delete the field just yet, to make it easier to merge things properly.) Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-10IB/core: Take sizeof the correct pointer when calling kmalloc()Dotan Barak
When allocating out_mad in show_pma_counter(), take sizeof *out_mad instead of sizeof *in_mad. It is true that today the type of in_mad and out_mad are the same, but this patch will give us a cleaner code. Signed-off-by: Dotan Barak <dotanb@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-24IB: Set class_dev->dev in core for nice device symlinkJoachim Fenkes
All RDMA drivers except ehca set class_dev->dev to their dma_device value (ehca leaves this unset). dma_device is the only value that makes any sense, so move this assignment to core/sysfs.c. This reduce the duplicated code in the rest of the drivers and gives ehca a nice /sys/class/infiniband/ehcaX/device symlink. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16IB/core: Fix sparse warnings about shadowed declarationsRoland Dreier
Change a couple of variable names to avoid sparse warnings about symbols being shadowed. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22RDMA: iWARP Core Changes.Tom Tucker
Modifications to the existing rdma header files, core files, drivers, and ulp files to support iWARP, including: - Hook iWARP CM into the build system and use it in rdma_cm. - Convert enum ib_node_type to enum rdma_node_type, which includes the possibility of RDMA_NODE_RNIC, and update everything for this. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB: Whitespace fixesRoland Dreier
Remove some trailing whitespace that has snuck in despite the best efforts of whitespace=error-all. Also fix a few other whitespace bogosities. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-09IB: Fix display of 4-bit port counters in sysfsRalph Campbell
The code to display local_link_integrity_errors and excessive_buffer_overrun_errors in /sys/class/infiniband/<hca>/ports/<n>/counters/ uses the wrong shift to extract the 4 bit values. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB: Coverity fixes to sysfs.cRoland Dreier
Fix two bugs found by coverity: - Memory leak in error path of alloc_group_attrs() - Fencepost error in state_show(): the test should be < ARRAY_SIZE(), not <= ARRAY_SIZE(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB: Allow userspace to set node descriptionRoland Dreier
Expose a writable "node_desc" sysfs attribute for InfiniBand devices. This allows userspace to update the node description with information such as the node's hostname, so that IB network management software can tie its view to the real world. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-10IB: Add node_guid to struct ib_deviceSean Hefty
Add a node_guid field to struct ib_device. It is the responsibility of the low-level driver to initialize this field before registering a device with the midlayer. Convert everyone to looking at this field instead of calling ib_query_device() when all they want is the node GUID, and remove the node_guid field from struct ib_device_attr. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-04[PATCH] driver core: replace "hotplug" by "uevent"Kay Sievers
Leave the overloaded "hotplug" word to susbsystems which are handling real devices. The driver core does not "plug" anything, it just exports the state to userspace and generates events. Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-07[PATCH] fix remaining missing includesTim Schmielau
Fix more include file problems that surfaced since I submitted the previous fix-missing-includes.patch. This should now allow not to include sched.h from module.h, which is done by a followup patch. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-02[IB] kzalloc() conversionsRoland Dreier
Replace kmalloc()+memset(,0,) with kzalloc(), for a net savings of 35 source lines and about 500 bytes of text. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-18[IB] Fail sysfs queries after device is unregisteredRoland Dreier
We keep IB device structures around until the last sysfs reference is gone, but we shouldn't ask the low-level driver to do anything after the LLD unregisters the device. To handle this, check the reg_state field and just fail sysfs show() requests if the device has already been unregistered. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-07[PATCH] drivers: convert kcalloc to kzallocPekka Enberg
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-26[PATCH] IB: move include files to include/rdmaRoland Dreier
Move the InfiniBand headers from drivers/infiniband/include to include/rdma. This allows InfiniBand-using code to live elsewhere, and lets us remove the ugly EXTRA_CFLAGS include path from the InfiniBand Makefiles. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26[PATCH] IB: sparse endianness cleanupSean Hefty
Fix sparse warnings. Use __be* where appropriate. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26[PATCH] IB: Add copyright noticesRoland Dreier
Make some lawyers happy and add copyright notices for people who forgot to include them when they actually touched the code. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-06-20[PATCH] sysfs: (rest) if show/store is missing return -EIODmitry Torokhov
sysfs: fix the rest of the kernel so if an attribute doesn't implement show or store method read/write will return -EIO instead of 0 or -EINVAL or -EPERM. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] Make attributes names const char *Dmitry Torokhov
sysfs: make attributes and attribute_group's names const char * Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 15:48:51 +0000