summaryrefslogtreecommitdiff
path: root/drivers/iio
AgeCommit message (Collapse)Author
2014-04-26iio: adc: Nothing in ADC should be a bool CONFIGDoug Anderson
The whole IIO subsystem can be built as modules. If you make it a module then stuff marked as "Y" in the adc directory simply won't be linked in properly. The two configs that were wrong were EXYNOS_ADC and LP8788_ADC. I know for a fact that EXYNOS_ADC will work as a module. I assume LP8788_ADC will also be fine. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-04-26iio: exynos_adc: use indio_dev->dev structure to handle child nodesNaveen Krishna Ch
Using pdev->dev with device_for_each_child() would iterate over all of the children of the platform device and delete them. Thus, causing crashes during module unload. We should be using the indio_dev->dev structure for registering/unregistering child nodes. Reported-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-04-26iio:imu:mpu6050: Fixed segfault in Invensens MPU driver due to null dereferenceAtilla Filiz
The driver segfaults when the kernel boots with device tree as the platform data is then not present and the pointer is deferenced without checking it is not null. This patch introduces such a check avoiding the crash. Signed-off-by: Atilla Filiz <atilla.filiz@essensium.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Stable@vger.kernel.org
2014-04-22Merge tag 'iio-fixes-for-3.15a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First found of IIO fixes for the 3.15 cycle. * Fix the platform data support for the at91 adc driver. * A couple of related follow up patches get the support working again for at91sam9260 and at91sam9g45 as the earlier patch results in a device name change. * A default timer value in the at91 adc driver was bonkers. Make it sane. * Fix incorrect reporting of the integration time for the cm32181 light sensor * Fix a missing break in the ad2s1200 driver which would have give a false error return. * Make sure buffer scan mask queries from userspace return 0/1 rather than a fairly random value depending on their implementation of test_bit * Fix leak of the i2c client and a null pointer dereference in the cm36651 driver. * Fix a build warning on avr32 for the mxs-lradc (not exactly a critical combination - but the issue was real).
2014-04-07Merge tag 'mfd-for-linus-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - Use of managed resources - omap, twl4030, ti_am335x_tscadc - Advanced error handling - omap - Rework clk management - omap - Device Tree (re-)work - tc3589x, pm8921, da9055, sec - IRC management overhaul and !BROKEN - pm8921 - Convert to regmap - ssbi, pm8921 - Use simple power-management ops - ucb1x00 - Include file clean-up - adp5520, cs5535, janz, lpc_ich, - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583, rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc, tps65912, vexpress-config, wm8350, ywm8350 - Various bug fixes across the subsystem - NULL/invalid pointer dereference prevention - Resource leak mitigation, - Variable used initialised - Staticise various containers - Enforce return value checks New drivers/supported devices: - Add support for s2mps14 and s2mpa01 to sec - Add support for da9063 (v5) to da9063 - Add support for atom-c2000 to gpio-ich - Add support for come-{mbt10,cbt6,chl6} to kempld - Add support for da9053 to da9052 - Add support for itco-wdt (v3) and baytrail to lpc_ich - Add new drivers for tps65218, rtsx_usb, bcm590xx (Re-)moved drivers: - twl4030 ==> drivers/iio - ti-ssp ==> /dev/null" * tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits) mfd: wm5110: Correct default for HEADPHONE_DETECT_1 mfd: arizona: Correct small errors in the DT binding documentation mfd: arizona: Mark DSP clocking register as volatile mfd: devicetree: bindings: Add pm8xxx RTC description mfd: kempld-core: Fix potential hang-up during boot mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01 mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail mfd: sec-core: Fix I2C dummy device resource leak on probe failure mfd: sec-core: Add of_compatible strings for clock MFD cells mfd: Remove obsolete ti-ssp driver Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks mfd: bcm590xx: Fix type argument for module device table mfd: lpc_ich: Add support for Intel Bay Trail SoC mfd: lpc_ich: Add support for NM10 GPIO mfd: lpc_ich: Change Avoton to iTCO v3 watchdog: iTCO_wdt: Add support for v3 silicon mfd: lpc_ich: Add support for iTCO v3 mfd: lpc_ich: Remove lpc_ich_cfg struct use mfd: lpc_ich: Only configure watchdog or GPIO when present ...
2014-04-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - substantial cleanup of the generic and transport layers, in the direction of an ultimate goal of making struct hid_device completely transport independent, by Benjamin Tissoires - cp2112 driver from David Barksdale - a lot of fixes and new hardware support (Dualshock 4) to hid-sony driver, by Frank Praznik - support for Win 8.1 multitouch protocol by Andrew Duggan - other smaller fixes / device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (75 commits) HID: sony: fix force feedback mismerge HID: sony: Set the quriks flag for Bluetooth controllers HID: sony: Fix Sixaxis cable state detection HID: uhid: Add UHID_CREATE2 + UHID_INPUT2 HID: hyperv: fix _raw_request() prototype HID: hyperv: Implement a stub raw_request() entry point HID: hid-sensor-hub: fix sleeping function called from invalid context HID: multitouch: add support for Win 8.1 multitouch touchpads HID: remove hid_output_raw_report transport implementations HID: sony: do not rely on hid_output_raw_report HID: cp2112: remove the last hid_output_raw_report() call HID: cp2112: remove various hid_out_raw_report calls HID: multitouch: add support of other generic collections in hid-mt HID: multitouch: remove pen special handling HID: multitouch: remove registered devices with default behavior HID: hidp: Add a comment that some devices depend on the current behavior of uniq HID: sony: Prevent duplicate controller connections. HID: sony: Perform a boundry check on the sixaxis battery level index. HID: sony: Fix work queue issues HID: sony: Fix multi-line comment styling ...
2014-04-01Merge tag 'staging-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here's the huge drivers/staging/ update for 3.15-rc1. Loads of cleanup fixes, a few drivers removed, and some new ones added. All have been in linux-next for a while" * tag 'staging-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1375 commits) staging: xillybus: XILLYBUS_PCIE depends on PCI_MSI staging: xillybus: Added "select CRC32" for XILLYBUS in Kconfig staging: comedi: poc: remove obsolete driver staging: unisys: replace kzalloc/kfree with UISMALLOC/UISFREE staging: octeon-usb: prevent memory corruption staging: usbip: fix line over 80 characters staging: usbip: fix quoted string split across lines Staging: unisys: Remove RETINT macro Staging: unisys: Remove FAIL macro Staging: unisys: Remove RETVOID macro Staging: unisys: Remove RETPTR macro Staging: unisys: Remove RETBOOL macro Staging: unisys: Remove FAIL_WPOSTCODE_1 macro Staging: unisys: Cleanup macros to get rid of goto statements Staging: unisys: include: Remove unused macros from timskmod.h staging: dgap: fix the rest of the checkpatch warnings in dgap.c Staging: bcm: Remove unnecessary parentheses staging: wlags49_h2: Delete unnecessary braces staging: wlags49_h2: Do not use assignment in if condition staging: wlags49_h2: Enclose macro in a do-while loop ...
2014-03-22iio: cm36651: Fix i2c client leak and possible NULL pointer dereferenceKrzysztof Kozlowski
During probe the driver allocates dummy I2C devices (i2c_new_dummy()) but they aren't unregistered during driver remove or probe failure. Additionally driver does not check the return value of i2c_new_dummy(). In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later dereferenced by i2c_smbus_{read,write}_data() functions. Fix issues by properly checking for i2c_new_dummy() return value and unregistering I2C devices on driver remove or probe failure. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Beomho Seo <beomho.seo@samsung.com> Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-03-22iio: querying buffer scan_mask should return 0/1Alec Berg
Ensure that querying the IIO buffer scan_mask returns a value of 0 or 1. Currently querying the scan mask has the value returned by test_bit(), which returns either true or false. For some architectures test_bit() may return -1 for true, which will appear to return an error when returning from iio_scan_mask_query(). Additionally, it's important for the sysfs interface to consistently return the same thing when querying the scan_mask. Signed-off-by: Alec Berg <alecaberg@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-03-19mfd: Delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: twl4030-madc: Move driver to drivers/iio/adcSebastian Reichel
This is a driver for an A/D converter, which belongs into drivers/iio/adc. Signed-off-by: Sebastian Reichel <sre@debian.org> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-15iio: adc: at91_adc: correct default shtim valueAlexandre Belloni
When sample_hold_time is zero (this is the case when DT is not used or if atmel,adc-sample-hold-time is omitted), then the calculated shtim is large. Make that 0, which is the default for that register and the ADC will then use a sane value of 2/ADCCLK or 1/ADCCLK depending on the version. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-03-15iio: cm32181: Fix read integration time functionBeomho Seo
In read integration time function, assign 0 to val. Because, prevent return inaccurate value when call read integration time. Cc: Stable@vger.kernel.org Cc: Kevin Tsai <ktsai@capellamicro.com> Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-03-08iio: adc: Fix build error discovered by 0-day build botJohannes Thumshirn
men_z188_adc needs to include linux/io.h. This fixes a build error discovered by 0-day buid bot Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-06Merge tag 'iio-for-3.15c' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Third IIO new drivers and cleanups series for 3.15. New driver * Xilinx XADC driver - This has been ready for a while but was awaiting a device tree ack (or as it turns out 3+ weeks). Cleanup * Drop some unreachable code from mag3110 highlighted by smatch. Fix * vf610 - introduced this cycle - put a possible negative error code into an unsigned long. Another smatch find - this one promoted by guilt that Dan was busy fixing all our messups.
2014-03-06iio: adc: at91_adc: Repair broken platform_data supportAlexandre Belloni
Trying to use the at91_adc driver while not using device tree is ending up in a kernel crash: Unable to handle kernel NULL pointer dereference at virtual address 00000004 [...] [<c01f3510>] (at91_adc_probe) from [<c0183828>] (platform_drv_probe+0x18/0x48) [<c0183828>] (platform_drv_probe) from [<c01824a4>] (driver_probe_device+0x100/0x218) [<c01824a4>] (driver_probe_device) from [<c0182648>] (__driver_attach+0x8c/0x90) [<c0182648>] (__driver_attach) from [<c0180de4>] (bus_for_each_dev+0x58/0x88) [<c0180de4>] (bus_for_each_dev) from [<c0181c7c>] (bus_add_driver+0xd4/0x1d4) [<c0181c7c>] (bus_add_driver) from [<c0182c40>] (driver_register+0x78/0xf4) [<c0182c40>] (driver_register) from [<c0008998>] (do_one_initcall+0xe8/0x14c) [<c0008998>] (do_one_initcall) from [<c02f0b50>] (kernel_init_freeable+0xec/0x1b4) [<c02f0b50>] (kernel_init_freeable) from [<c022acdc>] (kernel_init+0x8/0xe4) [<c022acdc>] (kernel_init) from [<c0009670>] (ret_from_fork+0x14/0x24) This is because the at91_adc_caps structure is mandatory but is not filled when using platform_data. Correct that by using an id_table. It ensues that the driver will not match "at91_adc" anymore but it was crashing anyway. Fixes: c46016665fff (iio: at91: ADC start-up time calculation changed since at91sam9x5) Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Josh Wu <josh.wu@atmel.com> Acked-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-03-02Merge 3.14-rc5 into staging-nextGreg Kroah-Hartman
We want those fixes in here
2014-03-02Merge 3.14-rc5 into char-misc-nextGreg Kroah-Hartman
We want these fixes in here as well.
2014-03-02iio:adc:vf610 ensure correct handing of interruption of wait for completionJonathan Cameron
Issue highlighted by smatch warning: CHECK drivers/iio/adc/vf610_adc.c drivers/iio/adc/vf610_adc.c:466 vf610_read_raw() warn: unsigned 'ret' is never less than zero. As wait_for_completion_interruptible_timeout can return -ERESTARTSTSYS, if interrupted, ret must be signed. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Fugang Duan <B38611@freescale.com>
2014-03-01iio:adc: Add Xilinx XADC driverLars-Peter Clausen
The Xilinx XADC is a ADC that can be found in the series 7 FPGAs from Xilinx. The XADC has a DRP interface for communication. Currently two different frontends for the DRP interface exist. One that is only available on the ZYNQ family as a hardmacro in the SoC portion of the ZYNQ. The other one is available on all series 7 platforms and is a softmacro with a AXI interface. This driver supports both interfaces and internally has a small abstraction layer that hides the specifics of these interfaces from the main driver logic. The ADC has a couple of internal channels which are used for voltage and temperature monitoring of the FPGA as well as one primary and up to 16 channels auxiliary channels for measuring external voltages. The external auxiliary channels can either be directly connected each to one physical pin on the FPGA or they can make use of an external multiplexer which is responsible for multiplexing the external signals onto one pair of physical pins. The voltage and temperature monitoring channels also have an event capability which allows to generate a interrupt when their value falls below or raises above a set threshold. Buffered sampling mode is supported by the driver, but only for AXI-XADC since the ZYNQ XADC interface does not have capabilities for supporting buffer mode (no end-of-conversion interrupt). If buffered mode is supported the driver will register two triggers. One "xadc-samplerate" trigger which will generate samples with the configured samplerate. And one "xadc-convst" trigger which will generate one sample each time the CONVST (conversion start) signal is asserted. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-28iio: adc: Add MEN 16z188 ADC driverJohannes Thumshirn
Add support for MEN 16z188 ADC IP Core on MCB FPGAs. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-25iio:magnetometer:mag3110: Fix unreachable codePeter Meerwald
drivers/iio/magnetometer/mag3110.c:197 mag3110_read_raw() info: ignoring unreachable code. drivers/iio/magnetometer/mag3110.c 185 case IIO_CHAN_INFO_SCALE: 186 switch (chan->type) { 187 case IIO_MAGN: 188 *val = 0; 189 *val2 = 1000; 190 return IIO_VAL_INT_PLUS_MICRO; 191 case IIO_TEMP: 192 *val = 1000; 193 return IIO_VAL_INT; 194 default: 195 return -EINVAL; 196 } 197 return IIO_VAL_INT_PLUS_MICRO; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ introduced by f9279d3a, mag3110: Scale factor missing Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-23iio:event: Fix and cleanup lockingLars-Peter Clausen
The event code currently holds a spinlock with IRQs disabled while calling kfifo_to_user(). kfifo_to_user() can generate a page fault though, which means we have to be able to sleep, which is not possible if the interrupts are disabled. The good thing is that kfifo handles concurrent read and write access just fine as long as there is only one reader and one writer, so we do not any locking to protect against concurrent access from the read and writer thread. It is possible though that userspace is trying to read from the event FIFO from multiple concurrent threads, so we need to add locking to protect against this. This is done using a mutex. The mutex will only protect the kfifo_to_user() call, it will not protect the waitqueue. This means that multiple threads can be waiting for new data and once a new event is added to the FIFO all waiting threads will be woken up. If one of those threads is unable to read any data (because another thread already read all the data) it will go back to sleep. The only remaining issue is that now that the clearing of the BUSY flag and the emptying of the FIFO does no longer happen in one atomic step it is possible that a event is added to the FIFO after it has been emptied and this sample will be visible the next time a new event file descriptor is created. To avoid this rather move the emptying of the FIFO from iio_event_chrdev_release to iio_event_getfd(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-22iio:pressure: Add support for LPS25H pressure sensorDenis CIOCCA
This patch adds support for the new barometer sensor: LPS25H. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-22iio: hid-sensors: Added Pressure Sensor driverArchana Patni
Added usage id processing for Pressure Sensor. This uses IIO interfaces for triggered buffer to present data to user mode. This uses HID sensor framework for registering callback events from the sensor hub. Signed-off-by: Archana Patni <archana.patni@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-22iio: hid-sensors: Added Proximity Sensor DriverArchana Patni
Added usage id processing for Proximity (Human Presence). This uses IIO interfaces for triggered buffer to present data to user mode. This uses HID sensor framework for registering callback events from the sensor hub. Signed-off-by: Archana Patni <archana.patni@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-18iio: Avoid unnecessary kasprintfLars-Peter Clausen
name_format already contains the final name and no format characters. So the code basically reads: dev_attr->attr.name = kstrdup(GFP_KERNEL, name_format); if (dev_attr->attr.name == NULL) ... kfree(name_format); Which means we can save one alloc and free pair per attribute name if we directly assign name_format to dev_attr->attr.name. The patch also renames name_format to name to denote that this is indeed the final name and has no format characters in it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-18iio: Don't include extended name in shared attributesLars-Peter Clausen
The extended name is channel specific and should not be included in shared attributes. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-18iio:gyro: bug on L3GD20H gyroscope supportDenis CIOCCA
The driver was not able to manage the sensor: during probe function and wai check, the driver stops and writes: "device name and WhoAmI mismatch." The correct value of L3GD20H wai is 0xd7 instead of 0xd4. Dropped support for the sensor. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-18iio: cm32181: Change cm32181 ambient light sensor driverBeomho Seo
Integration time of cm32181 is guessed about milliseconds. But cm32181_read_als_it function return IIO_VAL_INT. So fixed to return IIO_VAL_INT_PLUS_MICRO. Next, add .write_raw_get_fmt callback function for call iio_str_to_fixpoint. v2: cm32181_write_als_id function fixed as it was. Cc: Kevin Tsai <ktsai@capellamicro.com> Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-18iio: cm36651: Fix read/write integration time function.Beomho Seo
This patch is fixed [read/write] integration time function. cm36651 have integration time from 1 to 640 milliseconds. But, print more then the thousand second. when call *_integration_time attribute. Because read_integration_time function return IIO_VAL_INT. read integration time function is changed return IIO_VAL_INT_PLUS_MICRO; And then .write_raw_get_fmt callback function for parse a fixed-point number from a string. Some description is revised milliseconds unit. v2: cm36651_write_int_time function fixed as it was. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-18iio get rid of unneccessary error_retHartmut Knaack
Get rid of obsolete uses of goto error_ret and some empty lines. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-18iio:max1363 fix typos of int_vref_mvHartmut Knaack
This patch fixes some typos in max1363_chip_info_tbl[]. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-17iio: hid-sensor-hub: Remove hard coded indexesSrinivas Pandruvada
Remove the hard coded indexes, instead search for usage id and use the index to set the power and report state. This will fix issue, where the report descriptor doesn't contain the full list of possible selector for power and report state. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-15iio:accel:bma180: Make LOW_PASS_FILTER_3DB_FREQUENCY shared_by_typePeter Meerwald
the property is not per-channel, but shared by type Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Kravchenko Oleksandr <x0199363@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-15iio:adc:imx: add Freescale Vybrid vf610 adc driverFugang Duan
Add Freescale Vybrid vf610 adc driver. The driver only support ADC software trigger. VF610 ADC device documentation is available at below reference manual (chapter 37): http://cache.freescale.com/files/32bit/doc/ref_manual/VYBRIDRM.pdf? fpsp=1&WT_TYPE=Reference%20Manuals&WT_VENDOR=FREESCALE&WT_FILE_FORMAT =pdf&WT_ASSET=Documentation CC: Shawn Guo <shawn.guo@linaro.org> CC: Jonathan Cameron <jic23@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: Otavio Salvador <otavio@ossystems.com.br> CC: Peter Meerwald <pmeerw@pmeerw.net> CC: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-15iio:magnetometer:mag3110: Scale factor missing for temperaturePeter Meerwald
temperature is reported in milli-Celsius Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-11Merge tag 'iio-for-3.15a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new drivers and cleanups for IIO in the 3.15 cycle. New drivers: * si7005 relative humidity and temperature sensor * Lite-on ltr501 ambient light and proximity sensor Cleanups * Clean up some dead comments in max1363 * Drop some obsolete variables in adjd_s311 and tcs3472 left over from the introduction of iio_push_to_buffers_with_timestamp. * Drop some unneeded linux/init.h includes * Squish a sparse warning in mpl3115 by correctly specifying a be32 variable. * A number of cleanups and fixes for sca3000 * Drop an unneed checks in mxs-lradc, ad7303 and adis16400. * Drop a platform_set_drvdata in viperboard after the only use of it was removed during a devm conversion. * Add a missing device name for ak8975 to comply with the ABI. * Put mpu6050 into the IMU menu as it slipped out into the main menu. * Fix a typo and some comment formatting in mpu6050. * Document at91 ADC clock properties.
2014-02-08iio: imu: inv_mpu6050: Fix typo and formattingManuel Stahl
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-08iio: imu: mpu6050: Move config entry into IMU menuManuel Stahl
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-08iio: max1363: Use devm_regulator_get_optional for optional regulatorGuenter Roeck
In kernel version 3.13, devm_regulator_get() may return no error if a regulator is undeclared. regulator_get_voltage() will return -EINVAL if this happens. This causes the driver to fail loading if the vref regulator is not declared. Since vref is optional, call devm_regulator_get_optional instead. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-08iio:accel:bma180: Use modifier instead of index in channel specificationPeter Meerwald
This driver was not complying with the ABI and the purpose of this patch is to bring it inline so that userspace will correctly identify the channels. Should use channel modifiers (X/Y/Z), not channel indices timestamp channel has scan index 3, not 4 Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Kravchenko Oleksandr <x0199363@ti.com> Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-08iio: adis16400: Set timestamp as the last element in chan_specMarcus Folkesson
This is necessary since timestamp is calculated as the last element in iio_compute_scan_bytes(). Without this fix any userspace code reading the layout of the buffer via sysfs will incorrectly interpret the data leading some nasty corruption. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-08iio: ak8975: Add device nameBeomho Seo
This patch add device name. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-08iio: ak8975: Fix calculation formula for convert micro tesla to gauss unitBeomho Seo
This effects the reported scale of the raw values, and thus userspace applications that use this value. One micro tesla equal 0.01 gauss. So I have fixed calculation formula And add RAW_TO_GAUSS macro. ASA is in the range of 0 to 255. If multiply 0.003, calculation result(in_magn_[*]_scale) is always 0. So multiply 3000 and return and IIO_VAL_INT_PLUS_MICRO. As a result, read_raw call back function return accurate scale value. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-08iio:magnetometer:mag3110: Fix output of decimal digits in show_int_plus_micros()Peter Meerwald
need to print leading zeros, hence "%d.%06d" Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-08iio:magnetometer:mag3110: Report busy in _read_raw() / write_raw() when ↵Peter Meerwald
buffer is enabled individual reads are not permitted concurrently with buffered reads Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-07Merge tag 'iio-fixes-for-3.14a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes for the 3.14 cycle. Included is the patch previously set as the fourth round for 3.13 which was to late to be appropriate. * Another endian fix (ad799x adc) due to missuse of the IIO_ST macro (which is going away very shortly) * A reversed error check in ad5933 which will make the probe fail. * A buffer overflow in the example code in the documentation. * ad799x was freeing an irq that might or might not have been requested. * tsl2563 was checking the wrong element of chan_spec for modifiers. Thus some sysfs reads would give the wrong values. * A missing dependency on HAS_IOMEM in spear_adc and lpc32xx was causing some test build failures (on s390 and perhaps elsewhere). I also have a few fixes queued up for things that went in during the 3.14 merge window which will follow as a separate pull request (to avoid rebasing my tree).
2014-02-03iio: dac: ad7303: remove an unneeded checkDan Carpenter
"ret" is zero here. There is no need to check again. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-03iio:imu:adis16400 remove an unneeded checkDan Carpenter
We know "ret" is zero here so there is no need to check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>