summaryrefslogtreecommitdiff
path: root/drivers/iio
AgeCommit message (Collapse)Author
2020-03-08iio: imu: inv_mpu6050: enable i2c aux mux bypass only onceJean-Baptiste Maneyrol
i2c auxiliary mux is done by analog switches. You do not need to set them for every i2c transfer. Just set i2c bypass bit at init and do noting in i2c de/select. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: trigger: stm32-timer: enable clock when in master modeFabrice Gasnier
Clock should be enabled as soon as using master modes, even before enabling timer. Or, this may provoke bad behavior on the other end (slave timer). Then, introduce 'clk_enabled' flag, instead of relying on CR1 EN bit, to keep track of clock being enabled (balanced refcount). Propagate this anywhere else in the driver. Also add 'remove' routine to stop timer and disable clock in case it has been left enabled. Enforce the user interface has been unregistered in the remove routine, before disabling the hardware to avoid possible race. So, remove use of devm_ variant to register triggers and unregister them before the hardware gets disabled [1]. [1] https://patchwork.kernel.org/patch/9956247/ Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: light: al3320a allow module autoload and polishDavid Heidelberg
- allow autoloading when build as module and defined inside DT Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: light: al3320a implement devm_add_action_or_resetDavid Heidelberg
Use devm_add_action_or_reset to automatically disable the device and allow you to get rid of the remove function entirely. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: light: al3320a implement suspend supportDavid Heidelberg
AL3320a is fairly simple chip, so for suspend is enough to disable and later enable it again. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: light: add Dyna-Image AL3010 driverDavid Heidelberg
Based on: - 3320A in-kernel driver - https://www.spinics.net/lists/linux-iio/msg25145.html - https://lore.kernel.org/patchwork/patch/684179/ I decided to keep it aside of AL3320A due to different approach and much simpler design of 3010. Tested on Nexus 7 2012 (grouper/tilapia). Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: light: al3320a slightly improve code formattingDavid Heidelberg
- modified to be in part with al3010 driver - cleanup using bitfield, no functionality change intended Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08staging: iio: adc: ad7192: move out of stagingAlexandru Tachici
Move ad7192 ADC driver out of staging into mainline. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: adc: ad7124: Add direct reg accessMircea Caprioru
This patch adds the posibility do read and write registers from userspace using the kernel debug direct register access option. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: adis16460: Make use of __adis_initial_startupNuno Sá
All of the actions done in `adis16460_initial_setup()` are now done in `__adis_initial_startup()` so, there's no need for code duplication. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: adis16480: Make use of __adis_initial_startupNuno Sá
All actions done in `adis16480_initial_setup()` are now done in `__adis_initial_startup()` so, there's no need for code duplication. Furthermore, the call to `adis16480_initial_setup()` is done before any device configuration since the device will be reset if not already (via rst pin). This is actually fixing a potential bug since `adis_reset()` was being called after configuring the device which is obviously a problem. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: adis: add support product ID check in adis_initial_startupAlexandru Ardelean
Each driver/chip that wants to validate it's product id, can now specify a 'prod_id_reg' and an expected 'prod_id' value. The 'prod_id' value is intentionally left 0 (uninitialized). There aren't (yet) any product IDs with value 0; this enforces that both 'prod_id_reg' and 'prod_id' are specified. At the very least, this routine validates that the SPI connection to the ADIS chip[s] works well. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: adis: Refactor adis_initial_startupNuno Sá
All the ADIS devices perform, at the beginning, a self test to make sure the device is in a sane state. Previously, the logic was that the self-test was performed in adis_initial_startup() and if that failed a reset was done and then a self-test was attempted again. This change unifies the reset mechanism under the adis_initial_startup() call. A HW reset will be done if GPIO is configured, or a SW reset otherwise. This should make sure that the chip is in a sane state for self-test. Once the reset is done, the self-test operation will be performed. If anything goes wrong with self-test, the driver should just bail/error-out (i.e. no second attempt). The chip would likely not be a in a sane state state if the self-test fails after a reset. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: adis: Add self_test_reg variableNuno Sá
This patch adds a dedicated self_test_reg variable. This is also a step to let new drivers make use of `adis_initial_startup()`. Some devices use MSG_CTRL reg to request a self_test command while others use the GLOB_CMD register. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: adis: add unlocked __adis_initial_startup()Alexandru Ardelean
This change splits the __adis_initial_startup() away from adis_initial_startup(). The unlocked version can be used in certain calls during probe, where races won't happen since the ADIS driver may not be registered yet with IIO. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: gyro: adis16136: initialize adis_data staticallyAlexandru Ardelean
This change overrides commit 380b107bbf944 ("iio: adis: Introduce timeouts structure"). It removes the memory allocation and moves the 'adis_data' information to be static on the chip_info struct. This also adds a timeout structure to ADIS16334, since it was initially omitted. This was omitted (by accident) when the change was done. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: adis16400: initialize adis_data staticallyAlexandru Ardelean
This change overrides commit 380b107bbf944 ("iio: adis: Introduce timeouts structure"). It removes the memory allocation and moves the 'adis_data' information to be static on the chip_info struct. This also adds a timeout structure to ADIS16334, since it was initially omitted. This was omitted (by accident) when the change was done. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: adis16480: initialize adis_data staticallyAlexandru Ardelean
This change overrides commit 380b107bbf944 ("iio: adis: Introduce timeouts structure"). It removes the memory allocation and moves the 'adis_data' information to be static on the chip_info struct. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: st_lsm6dsx: check return value from st_lsm6dsx_sensor_set_enableLorenzo Bianconi
Add missing return value check in st_lsm6dsx_shub_read_oneshot disabling the slave device connected to the st_lsm6dsx i2c controller. The issue is reported by coverity with the following error: Unchecked return value: If the function returns an error value, the error value may be mistaken for a normal value. Addresses-Coverity-ID: 1456767 ("Unchecked return value") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: amplifiers: hmc425a: Add support for HMC425A attenuatorMichael Hennerich
This patch adds support for the HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: ping: set pa_laser_ping_cfg in of_ping_matchYueHaibing
pa_laser_ping_cfg should be set in of_ping_match instead of pa_ping_cfg. Fixes: 7bb501f49ddb ("iio: ping: add parallax ping sensors") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: chemical: sps30: fix missing triggered buffer dependencyPetr Štetiar
SPS30 uses triggered buffer, but the dependency is not specified in the Kconfig file. Fix this by selecting IIO_BUFFER and IIO_TRIGGERED_BUFFER config symbols. Cc: stable@vger.kernel.org Fixes: 232e0f6ddeae ("iio: chemical: add support for Sensirion SPS30 sensor") Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: st_sensors: remap SMO8840 to LIS2DH12Wen-chien Jesse Sung
According to ST, the HID is for LIS2DH12. Fixes: 3d56e19815b3 ("iio: accel: st_accel: Add support for the SMO8840 ACPI id") Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: light: vcnl4000: update sampling periods for vcnl4040Tomas Novotny
Vishay has published a new version of "Designing the VCNL4200 Into an Application" application note in October 2019. The new version specifies that there is +-20% of part to part tolerance. Although the application note is related to vcnl4200, according to support the vcnl4040's "ASIC is quite similar to that one for the VCNL4200". So update the sampling periods (and comment), including the correct sampling period for proximity. Both sampling periods are lower. Users relying on the blocking behaviour of reading will get proximity measurements much earlier. Fixes: 5a441aade5b3 ("iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor") Reviewed-by: Guido Günther <agx@sigxcpu.org> Tested-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Tomas Novotny <tomas@novotny.cz> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: light: vcnl4000: update sampling periods for vcnl4200Tomas Novotny
Vishay has published a new version of "Designing the VCNL4200 Into an Application" application note in October 2019. The new version specifies that there is +-20% of part to part tolerance. This explains the drift seen during experiments. The proximity pulse width is also changed from 32us to 30us. According to the support, the tolerance also applies to ambient light. So update the sampling periods. As the reading is blocking, current users may notice slightly longer response time. Fixes: be38866fbb97 ("iio: vcnl4000: add support for VCNL4200") Reviewed-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Tomas Novotny <tomas@novotny.cz> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: accel: adxl372: Set iio_chan BEAlexandru Tachici
Data stored in the iio-buffer is BE and this should be specified in the iio_chan_spec struct. Fixes: f4f55ce38e5f8 ("iio:adxl372: Add FIFO and interrupts support") Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-21iio: magnetometer: ak8974: Fix negative raw values in sysfsStephan Gerhold
At the moment, reading from in_magn_*_raw in sysfs tends to return large values around 65000, even though the output of ak8974 is actually limited to ±32768. This happens because the value is never converted to the signed 16-bit integer variant. Add an explicit cast to s16 to fix this. Fixes: 7c94a8b2ee8c ("iio: magn: add a driver for AK8974") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Waleij <linus.walleij@linaro.org> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-21iio: amplifiers: ad8366: Add write_raw_get_fmt functionBeniamin Bia
This patch add write_raw_get_fmt function to specify conversion for hardware gain. Signed-off-by: Beniamin Bia <beniamin.bia@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-21iio: core: Handle 'dB' suffix in coreBeniamin Bia
This patch handles the db suffix used for writing micro db values. Signed-off-by: Beniamin Bia <beniamin.bia@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-15iio: trigger: stm32-timer: disable master mode when stoppingFabrice Gasnier
Master mode should be disabled when stopping. This mainly impacts possible other use-case after timer has been stopped. Currently, master mode remains set (from start routine). Fixes: 6fb34812c2a2 ("iio: stm32 trigger: Add support for TRGO2 triggers") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-14iio: imu: inv_mpu6050: update LPF bandwidth settingsJean-Baptiste Maneyrol
As every chip has some little variant in LPF bandwidth values, use common values that are working for all chips. Simplify the LPF setting function. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-14iio: imu: inv_mpu6050: add support of ICM20690Jean-Baptiste Maneyrol
Same generation as ICM20602 but different registers. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-14iio: imu: inv_mpu6050: add support of IAM20680Jean-Baptiste Maneyrol
Automotive certified IMU, similar to ICM20608. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-14iio: imu: inv_mpu6050: add support of ICM20609 & ICM20689Jean-Baptiste Maneyrol
They are similar to ICM20608 chip. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-14iio: imu: inv_mpu6050: cleanup of/acpi supportJean-Baptiste Maneyrol
Use device_get_match_data for using of and acpi tables. In spi support add missing mpu6515 and of match table. Reorganize Kconfig to display chips grouped by generations. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-14iio: adc: modify NPCM reset supportTomer Maimon
Modify NPCM ADC reset support from direct register access to reset controller support. please make sure to modify NPCM adc device tree parameters as described at nuvoton,npcm-adc.txt document for using this change. Note for anyone noting that this is a breaking change, this is on a BMC and effectively in a close ecosystem so it is fine to rely on DT and kernel being updated together. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-14iio: vcnl4000: Enable runtime pm for vcnl4200/4040Guido Günther
This is modelled after the vcnl4035 driver. For the vcnl40{0,1,2}0 we don't do anything since they use on demand measurement. Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-14iio: vcnl4000: Use a single return when getting IIO_CHAN_INFO_RAWGuido Günther
This will be useful when introducing runtime pm. Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-14iio: dac: ltc2632: remove some unused definesUwe Kleine-König
These two defines are unused since the driver was introduced in commit 02b829f9e11f ("iio: dac: Add support for ltc2632 DACs"). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-14iio: dac: ltc2632: add support for LTC2636 familyUwe Kleine-König
The only difference between LTC2632 and LTC2636 is that the former has two DAC channels while the latter has eight. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-14iio: dac: ltc2632: drop some duplicated dataUwe Kleine-König
The channel data for ltc2632l12 and ltc2632h12 are identical. So there is no gain in using two different (but identical) channel descriptions. The only side effect of this change is some memory savings. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-14iio: srf04: add power management featureAndreas Klinger
Add suspend and resume operations for being used by optional power management. The suspend function is switching off an GPIO which can be used by the hardware to switch power off. The resume function is switching the GPIO on and sleeps an adjustable time to give the device a chance to be up and running. If activated the driver gets into autosuspend after some time of inactivity. Suggested-by: Franz Parzer <rpi-receiver@htl-steyr.ac.at> Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-14iio: st_sensors: handle memory allocation failure to fix null pointer ↵Colin Ian King
dereference A null pointer deference on pdata can occur if the allocation of pdata fails. Fix this by adding a null pointer check and handle the -ENOMEM failure in the caller. Addresses-Coverity: ("Dereference null return value") Fixes: 3ce85cc4fbb7 ("iio: st_sensors: get platform data from device tree") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-14iio: adc: ad7124: add 3db filterAlexandru Tachici
This patch adds the LOW_PASS_FILTER_3DB_FREQUENCY attribute in iio_chan_spec for each channel. The used filters are sinc3 or sinc4. The filter type with the highest output data rate is used when setting a low pass frequency in the channel's sysfs. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-14iio: ad5755: fix spelling mistake "to" -> "too" and grammar plus formattingColin Ian King
There is a spelling mistake and grammar mistake in a dev_err message. Fix it. Also include Joe Perches' additional suggestions around: * Missing newlines * Excess braces * Odd indentation * Some grammar Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Suggested-by: Joe Perches <joe@perches.com> # Additional cleanups etc. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-14iio: light: Add a driver for Sharp GP2AP002x00FLinus Walleij
This driver handles two different Sharp sensors that have been proposed for merging to the mainline kernel over the years, and already has a limited proximity-only driver in the input subsystem. These components are completely different from the confusingly similarly named Sharp GP2AP020A00F, for which we have a driver in drivers/iio/light/gp2ap020a00f.c The two components GP2AP002A00F and GP2AP002S00F are distinctively different but similar: they share the same set of registers but differ slightly in the I2C protocol. Instead of the approach by the previous input driver, we create a combined IIO proximity and light sensor driver. The plan is to merge this driver and delete the input driver. The pieces for the driver are picked all over the place after researching and grepping through a few different vendor trees and driver submissions. We merge it under the light sensors because: - It has similarities with the Capella CM3605 light sensor and proximity driver which is there. - It is related to the GP2AP020A00F driver which is also there. This driver was tested with the Samsung GT-S7710 mobile phone which has the GP2AP002S00F proximity sensor mounted. The suspend/resume cycle will disable the interrupt from the sensor. If someone would desire to use this interrupt for wakeup, the driver will need modifications. Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: Jonathan Bakker <xc-racer2@live.ca> Cc: Oskar Andero <oskar.andero@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-14iio: imu: st_lsm6dsx: Fix mismatched commentsJieunKim
odr to odr_table gain to fs_table 'gain' is actually in 'st_lsm6dsx_fs' structure of 'fs_table' Signed-off-by: JieunKim <jieun.kim4758@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-14iio: accel: st_accel: Use st_sensors_dev_name_probe()Andy Shevchenko
Use st_sensors_dev_name_probe() instead open coded variant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-04Merge tag 'tag-chrome-platform-for-v5.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "CrOS EC: - Refactoring of some of cros_ec's headers: include/linux/mfd/cros_ec.h now removed, new cros_ec.h added to drivers/platform/chrome which contains shared operations of cros_ec transport drivers. - Response tracing in cros_ec_proto Wilco EC: - Fix unregistration order. - Fix keyboard backlight probing on systems without keyboard backlight - Minor cleanup (newlines in printks, COMPILE_TEST) Misc: - chromeos_laptop converted to use i2c_new_scanned_device instead of i2c_new_probed_device" * tag 'tag-chrome-platform-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec: Match implementation with headers platform/chrome: cros_ec: Drop unaligned.h include platform/chrome: wilco_ec: Allow wilco to be compiled in COMPILE_TEST platform/chrome: wilco_ec: Add newlines to printks platform/chrome: wilco_ec: Fix unregistration order cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h' platform/chrome: cros_ec_ishtp: Make init_lock static platform/chrome: chromeos_laptop: Convert to i2c_new_scanned_device platform/chrome: cros_ec_lpc: Use platform_get_irq_optional() for optional IRQs platform/chrome: cros_ec_proto: Add response tracing platform/chrome: cros_ec_trace: Match trace commands with EC commands
2020-02-02iio: adc: stm32-dfsdm: fix sleep in atomic contextOlivier Moysan
This commit fixes the error message: "BUG: sleeping function called from invalid context at kernel/irq/chip.c" Suppress the trigger irq handler. Make the buffer transfers directly in DMA callback, instead. Push buffers without timestamps, as timestamps are not supported in DFSDM driver. Fixes: 11646e81d775 ("iio: adc: stm32-dfsdm: add support for buffer modes") Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 21:29:09 +0000