summaryrefslogtreecommitdiff
path: root/drivers/iio
AgeCommit message (Collapse)Author
2021-05-10iio: tsl2583: Fix division by a zero lux_valColin Ian King
The lux_val returned from tsl2583_get_lux can potentially be zero, so check for this to avoid a division by zero and an overflowed gain_trim_val. Fixes clang scan-build warning: drivers/iio/light/tsl2583.c:345:40: warning: Either the condition 'lux_val<0' is redundant or there is division by zero at line 345. [zerodivcond] Fixes: ac4f6eee8fe8 ("staging: iio: TAOS tsl258x: Device driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-10iio: core: return ENODEV if ioctl is unknownAlexandru Ardelean
When the ioctl() mechanism was introduced in IIO core to centralize the registration of all ioctls in one place via commit 8dedcc3eee3ac ("iio: core: centralize ioctl() calls to the main chardev"), the return code was changed from ENODEV to EINVAL, when the ioctl code isn't known. This was done by accident. This change reverts back to the old behavior, where if the ioctl() code isn't known, ENODEV is returned (vs EINVAL). This was brought into perspective by this patch: https://lore.kernel.org/linux-iio/20210428150815.136150-1-paul@crapouillou.net/ Fixes: 8dedcc3eee3ac ("iio: core: centralize ioctl() calls to the main chardev") Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Tested-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-10iio: core: fix ioctl handlers removalTomasz Duszynski
Currently ioctl handlers are removed twice. For the first time during iio_device_unregister() then later on inside iio_device_unregister_eventset() and iio_buffers_free_sysfs_and_mask(). Double free leads to kernel panic. Fix this by not touching ioctl handlers list directly but rather letting code responsible for registration call the matching cleanup routine itself. Fixes: 8dedcc3eee3ac ("iio: core: centralize ioctl() calls to the main chardev") Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com> Acked-by: Alexandru Ardelean <ardeleanalex@gmail.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210423080244.2790-1-tomasz.duszynski@octakon.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-10iio: gyro: mpu3050: Fix reported temperature valueDmitry Osipenko
The raw temperature value is a 16-bit signed integer. The sign casting is missing in the code, which results in a wrong temperature reported by userspace tools, fix it. Cc: stable@vger.kernel.org Fixes: 3904b28efb2c ("iio: gyro: Add driver for the MPU-3050 gyroscope") Datasheet: https://www.cdiweb.com/datasheets/invensense/mpu-3000a.pdf Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # Asus TF201 Reported-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Andy Shevchenko <Andy.Shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Link: https://lore.kernel.org/r/20210423020959.5023-1-digetx@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-10iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGERAlexandru Ardelean
During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger"), the iio_triggered_buffer_{setup,cleanup}() functions got moved under the hid-sensor-trigger module. The above change works fine, if any of the sensors get built. However, when only the common hid-sensor-trigger module gets built (and none of the drivers), then the IIO_TRIGGERED_BUFFER symbol isn't selected/enforced. Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER gets selected. All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, this change removes the IIO_TRIGGERED_BUFFER enforcement from each driver. Fixes: 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger") Reported-by: Thomas Deutschmann <whissi@gentoo.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20210414084955.260117-1-aardelean@deviqon.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-10iio: proximity: pulsedlight: Fix rumtime PM imbalance on errorDinghao Liu
When lidar_write_control() fails, a pairing PM usage counter decrement is needed to keep the counter balanced. Fixes: 4ac4e086fd8c5 ("iio: pulsedlight-lidar-lite: add runtime PM") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210412053204.4889-1-dinghao.liu@zju.edu.cn Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-10iio: light: gp2ap002: Fix rumtime PM imbalance on errorDinghao Liu
When devm_request_threaded_irq() fails, we should decrease the runtime PM counter to keep the counter balanced. But when iio_device_register() fails, we need not to decrease it because we have already decreased it before. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Fixes: 97d642e23037 ("iio: light: Add a driver for Sharp GP2AP002x00F") Link: https://lore.kernel.org/r/20210407034927.16882-1-dinghao.liu@zju.edu.cn Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-04-26Merge tag 'spi-v5.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The only core work for SPI this time around is the completion of the conversion to the new style method for specifying transfer delays, meaning we can cope with what most controllers support more directly using conversions in the core rather than open coding in drivers. Otherwise it's a good stack of cleanups and fixes plus a few new drivers. Summary: - Completion of the conversion to new style transfer delay configuration - Introduction and use of module_parport_driver() helper, merged here as there's no parport tree - Support for Altera SoCs on DFL buses, NXP i.MX8DL, HiSilicon Kunpeng, MediaTek MT8195" * tag 'spi-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (113 commits) spi: Rename enable1 to activate in spi_set_cs() spi: Convert Freescale QSPI binding to json schema spi: stm32-qspi: fix debug format string spi: tools: make a symbolic link to the header file spi.h spi: fsi: add a missing of_node_put spi: Make error handling of gpiod_count() call cleaner spidev: Add Micron SPI NOR Authenta device compatible spi: brcm,spi-bcm-qspi: convert to the json-schema spi: altera: Add DFL bus driver for Altera API Controller spi: altera: separate core code from platform code spi: stm32-qspi: Fix compilation warning in ARM64 spi: Handle SPI device setup callback failure. spi: sync up initial chipselect state spi: stm32-qspi: Add dirmap support spi: stm32-qspi: Trigger DMA only if more than 4 bytes to transfer spi: stm32-qspi: fix pm_runtime usage_count counter spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op spi: spi-zynqmp-gqspi: Resolved slab-out-of-bounds bug spi: spi-zynqmp-gqspi: fix hang issue when suspend/resume ...
2021-04-26Merge tag 'acpi-5.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to the most recent upstream revision including (but not limited to) new material introduced in the 6.4 version of the spec, update message printing in the ACPI-related code, address a few issues and clean up code in a number of places. Specifics: - Update ACPICA code in the kernel to upstream revision 20210331 including the following changes: * Add parsing for IVRS IVHD 40h and device entry F0h (Alexander Monakov). * Add new CEDT table for CXL 2.0 and iASL support for it (Ben Widawsky, Bob Moore). * NFIT: add Location Cookie field (Bob Moore). * HMAT: add new fields/flags (Bob Moore). * Add new flags in SRAT (Bob Moore). * PMTT: add new fields/structures (Bob Moore). * Add CSI2Bus resource template (Bob Moore). * iASL: Decode subtable type field for VIOT (Bob Moore). * Fix various typos and spelling mistakes (Colin Ian King). * Add new predefined objects _BPC, _BPS, and _BPT (Erik Kaneda). * Add USB4 capabilities UUID (Erik Kaneda). * Add CXL ACPI device ID and _CBR object (Erik Kaneda). * MADT: add Multiprocessor Wakeup Structure (Erik Kaneda). * PCCT: add support for subtable type 5 (Erik Kaneda). * PPTT: add new version of subtable type 1 (Erik Kaneda). * Add SDEV secure access components (Erik Kaneda). * Add support for PHAT table (Erik Kaneda). * iASL: Add definitions for the VIOT table (Jean-Philippe Brucker). * acpisrc: Add missing conversion for VIOT support (Jean-Philippe Brucker). * IORT: Updates for revision E.b (Shameer Kolothum). - Rearrange message printing in ACPI-related code to avoid using the ACPICA's internal message printing macros outside ACPICA and do some related code cleanups (Rafael Wysocki). - Modify the device enumeration code to turn off all of the unused ACPI power resources at the end (Rafael Wysocki). - Change the ACPI power resources handling code to turn off unused ACPI power resources without checking their status which should not be necessary by the spec (Rafael Wysocki). - Add empty stubs for CPPC-related functions to be used when CONFIG_ACPI_CPPC_LIB is not set (Rafael Wysocki). - Simplify device enumeration code (Rafael Wysocki). - Change device enumeration code to use match_string() for string matching (Andy Shevchenko). - Modify irqresource_disabled() to retain the resouce flags that have been set already (Angela Czubak). - Add native backlight whitelist entry for GA401/GA502/GA503 (Luke Jones). - Modify the ACPI backlight driver to let the native backlight handling take over on hardware-reduced systems (Hans de Goede). - Introduce acpi_dev_get() and switch over the ACPI core code to using it (Andy Shevchenko). - Use kobj_attribute as callback argument instead of a local struct type in the CPPC linrary code (Nathan Chancellor). - Drop unneeded initializatio of a static variable from the ACPI processor driver (Tian Tao). - Drop unnecessary local variable assignment from the ACPI APEI code (Colin Ian King). - Document for_each_acpi_dev_match() macro (Andy Shevchenko). - Address assorted coding style issues in multiple places (Xiaofei Tan). - Capitalize TLAs in a few comments (Andy Shevchenko). - Correct assorted typos in comments (Tom Saeger)" * tag 'acpi-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits) ACPI: video: use native backlight for GA401/GA502/GA503 ACPI: APEI: remove redundant assignment to variable rc ACPI: utils: Capitalize abbreviations in the comments ACPI: utils: Document for_each_acpi_dev_match() macro ACPI: bus: Introduce acpi_dev_get() and reuse it in ACPI code ACPI: scan: Utilize match_string() API resource: Prevent irqresource_disabled() from erasing flags ACPI: CPPC: Replace cppc_attr with kobj_attribute ACPI: scan: Call acpi_get_object_info() from acpi_set_pnp_ids() ACPI: scan: Drop sta argument from acpi_init_device_object() ACPI: scan: Drop sta argument from acpi_add_single_object() ACPI: scan: Rearrange checks in acpi_bus_check_add() ACPI: scan: Fold acpi_bus_type_and_status() into its caller ACPI: video: Check LCD flag on ACPI-reduced-hardware devices ACPI: utils: Add acpi_reduced_hardware() helper ACPI: dock: fix some coding style issues ACPI: sysfs: fix some coding style issues ACPI: PM: add a missed blank line after declarations ACPI: custom_method: fix a coding style issue ACPI: CPPC: fix some coding style issues ...
2021-04-26Merge tag 'arm-drivers-5.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: TEE/OP-TEE: - Add tracepoints around calls to secure world Memory controller drivers: - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms - Add debug statistics to Tegra20 memory controller - Update Tegra bindings and convert to dtschema ARM SCMI Firmware: - Support for modular SCMI protocols and vendor specific extensions - New SCMI IIO driver - Per-cpu DVFS The other driver changes are all from the platform maintainers directly and reflect the drivers that don't fit into any other subsystem as well as treewide changes for a particular platform. SoCFPGA: - Various cleanups contributed by Krzysztof Kozlowski Mediatek: - add MT8183 support to mutex driver - MMSYS: use per SoC array to describe the possible routing - add MMSYS support for MT8183 and MT8167 - add support for PMIC wrapper with integrated arbiter - add support for MT8192/MT6873 Tegra: - Bug fixes to PMC and clock drivers NXP/i.MX: - Update SCU power domain driver to keep console domain power on. - Add missing ADC1 power domain to SCU power domain driver. - Update comments for single global power domain in SCU power domain driver. - Add i.MX51/i.MX53 unique id support to i.MX SoC driver. NXP/FSL SoC driver updates for v5.13 - Add ACPI support for RCPM driver - Use generic io{read,write} for QE drivers after performance optimized for PowerPC - Fix QBMAN probe to cleanup HW states correctly for kexec - Various cleanup and style fix for QBMAN/QE/GUTS drivers OMAP: - Preparation to use devicetree for genpd - ti-sysc needs iorange check improved when the interconnect target module has no control registers listed - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid issues with missing resources and unnecessary deferred probe - ti-sysc debug option can now detect more devices - ti-sysc now warns if an old incomplete devicetree data is found as we now rely on it being complete for am3 and 4 - soc init code needs to check for prcm and prm nodes for omap4/5 and dra7 - omap-prm driver needs to enable autoidle retention support for omap4 - omap5 clocks are missing gpmc and ocmc clock registers - pci-dra7xx now needs to use builtin_platform_driver instead of using builtin_platform_driver_probe for deferred probe to work Raspberry Pi: - Fix-up all RPi firmware drivers so as for unbind to happen in an orderly fashion - Support for RPi's PoE hat PWM bus Qualcomm - Improved detection for SCM calling conventions - Support for OEM specific wifi firmware path - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP" * tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) soc: aspeed: fix a ternary sign expansion bug memory: mtk-smi: Add device-link between smi-larb and smi-common memory: samsung: exynos5422-dmc: handle clk_set_parent() failure memory: renesas-rpc-if: fix possible NULL pointer dereference of resource clk: socfpga: fix iomem pointer cast on 64-bit soc: aspeed: Adapt to new LPC device tree layout pinctrl: aspeed-g5: Adapt to new LPC device tree layout ipmi: kcs: aspeed: Adapt to new LPC DTS layout ARM: dts: Remove LPC BMC and Host partitions dt-bindings: aspeed-lpc: Remove LPC partitioning soc: fsl: enable acpi support in RCPM driver soc: qcom: mdt_loader: Detect truncated read of segments soc: qcom: mdt_loader: Validate that p_filesz < p_memsz soc: qcom: pdr: Fix error return code in pdr_register_listener firmware: qcom_scm: Fix kernel-doc function names to match firmware: qcom_scm: Suppress sysfs bind attributes firmware: qcom_scm: Workaround lack of "is available" call on SC7180 firmware: qcom_scm: Reduce locking section for __get_convention() firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers" ...
2021-04-26Merge branch 'acpi-messages'Rafael J. Wysocki
* acpi-messages: hwmon: acpi_power_meter: Get rid of ACPICA message printing IIO: acpi-als: Get rid of ACPICA message printing ACPI: utils: Introduce acpi_evaluation_failure_warn() ACPI: Drop unused ACPI_*_COMPONENT definitions and update documentation ACPI: sysfs: Get rid of ACPICA message printing
2021-04-07iio: inv_mpu6050: Fully validate gyro and accel scale writesLars-Peter Clausen
When setting the gyro or accelerometer scale the inv_mpu6050 driver ignores the integer part of the value. As a result e.g. all of 0.13309, 1.13309, 12345.13309, ... are accepted as a valid gyro scale and 0.13309 is the scale that gets set in all those cases. Make sure to check that the integer part of the scale value is 0 and reject it otherwise. Fixes: 09a642b78523 ("Invensense MPU6050 Device Driver.") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Link: https://lore.kernel.org/r/20210405114441.24167-1-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-04-07iio: sx9310: Fix write_.._debounce()Gwendal Grignou
Check input to be sure it matches Semtech sx9310 specification and can fit into debounce register. Compare argument writen to thresh_.._period with read from same sysfs attribute: Before: Afer: write | read write | read -1 | 8 -1 fails: -EINVAL 0 | 8 0 | 0 1 | 0 1 | 0 2..15 | 2^log2(N) 2..15 | 2^log2(N) 16 | 0 >= 16 fails: -EINVAL Fixes: 1b6872015f0b ("iio: sx9310: Support setting debounce values") Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Cc: stable@vger.kernel.org Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210331182222.219533-1-gwendal@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-04-07iio: sx9310: Fix access to variable DT arrayGwendal Grignou
With the current code, we want to read 4 entries from DT array "semtech,combined-sensors". If there are less, we silently fail as of_property_read_u32_array() returns -EOVERFLOW. First count the number of entries and if between 1 and 4, collect the content of the array. Fixes: 5b19ca2c78a0 ("iio: sx9310: Set various settings from DT") Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210326184603.251683-2-gwendal@chromium.org Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-04-07iio: adc: Kconfig: make AD9467 depend on ADI_AXI_ADC symbolAlexandru Ardelean
Because a dependency on HAS_IOMEM and OF was added for the ADI AXI ADC driver, this makes the AD9467 driver have some build/dependency issues when OF is disabled (typically on ACPI archs like x86). This is because the selection of the AD9467 enforces the ADI_AXI_ADC symbol which is blocked by the OF (and potentially HAS_IOMEM) being disabled. To fix this, we make the AD9467 driver depend on the ADI_AXI_ADC symbol. The AD9467 driver cannot operate on it's own. It requires the ADI AXI ADC driver to stream data (or some similar IIO interface). So, the fix here is to make the AD9467 symbol depend on the ADI_AXI_ADC symbol. At some point this could become it's own subgroup of high-speed ADCs. Fixes: be24c65e9fa24 ("iio: adc: adi-axi-adc: add proper Kconfig dependencies") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210324182746.9337-1-aardelean@deviqon.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-04-07iio: magnetometer: yas530: Include right headerLinus Walleij
To get access to the big endian byte order parsing helpers drivers need to include <asm/unaligned.h> and nothing else. Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210215153032.47962-1-linus.walleij@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-04-07iio: magnetometer: yas530: Fix return value on error pathLinus Walleij
There was a missed return variable assignment in the default errorpath of the switch statement in yas5xx_probe(). Fix it. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210215153023.47899-1-linus.walleij@linaro.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-04-07iio:cdc:ad7150: Fix use of uninitialized retJonathan Cameron
This doesn't appear to generate a warning on all versions of GCC, but 0-day reported it and the report looks valid. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-04-07iio: hrtimer-trigger: Fix potential integer overflow in ↵Gustavo A. R. Silva
iio_hrtimer_store_sampling_frequency Add suffix ULL to constant 1000 in order to avoid a potential integer overflow and give the compiler complete information about the proper arithmetic to use. Notice that this constant is being used in a context that expects an expression of type unsigned long long, but it's currently evaluated using 32-bit arithmetic. Addresses-Coverity-ID: 1503062 ("Unintentional integer overflow") Fixes: dafcf4ed8392 ("iio: hrtimer: Allow sub Hz granularity") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20210329205817.GA188755@embeddedor Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-04-07iio:adc: Fix trivial typoJonathan Cameron
"an" should be "and". Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20210401150810.227168-1-jic23@kernel.org
2021-04-07iio:adc:ad7476: Fix remove handlingJonathan Cameron
This driver was in an odd half way state between devm based cleanup and manual cleanup (most of which was missing). I would guess something went wrong with a rebase or similar. Anyhow, this basically finishes the job as a precursor to improving the regulator handling. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Fixes: 4bb2b8f94ace3 ("iio: adc: ad7476: implement devm_add_action_or_reset") Cc: Michael Hennerich <michael.hennerich@analog.com> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210401171759.318140-2-jic23@kernel.org
2021-04-07iio:adc:ad_sigma_delta: Use IRQF_NO_AUTOEN rather than request and disableJonathan Cameron
These devices are not able to mask the signal used as a data ready interrupt. As such they previously requested the irq then immediately disabled it. Now we can avoid the potential of a spurious interrupt by avoiding the irq being auto enabled in the first place. I'm not sure how this code could have been called with the irq already disabled, so I believe the conditional would always have been true and have removed it. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Alexandru Ardelean <ardeleanalex@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20210402184544.488862-8-jic23@kernel.org
2021-04-07iio:imu:adis: Use IRQF_NO_AUTOEN instead of irq request then disableJonathan Cameron
This is a bit involved as the adis library code already has some sanity checking of the flags of the requested irq that we need to ensure is happy to pass through the IRQF_NO_AUTOEN flag untouched. Using this flag avoids us autoenabling the irq in the adis16460 and adis16475 drivers which cover parts that don't have any means of masking the interrupt on the device end. Note, compile tested only! Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Alexandru Ardelean <ardeleanalex@gmail.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Barry Song <song.bao.hua@hisilicon.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20210402184544.488862-7-jic23@kernel.org
2021-04-07iio:chemical:scd30: Use IRQF_NO_AUTOEN to avoid irq request then disableJonathan Cameron
This new flag cleanly avoids the need for a dance where we request the interrupt only to immediately disabling it by ensuring it is not auto-enabled in the first place. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Tomasz Duszynski <tomasz.duszynski@octakon.com> Reviewed-by: Barry Song <song.bao.hua@hisilicon.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20210402184544.488862-6-jic23@kernel.org
2021-04-07iio:adc:sun4i-gpadc: Use new IRQF_NO_AUTOEN flag instead of request then disableJonathan Cameron
This new flag ensures a requested irq is not autoenabled, thus removing the need for the disable_irq() that follows and closing off any chance of spurious interrupts. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Barry Song <song.bao.hua@hisilicon.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20210402184544.488862-5-jic23@kernel.org
2021-04-07iio:adc:nau7802: Use IRQF_NO_AUTOEN instead of request then disableJonathan Cameron
Whilst a race during interrupt enabling is probably not a problem, it is better to not enable the interrupt at all. The new IRQF_NO_AUTOEN flag allows us to do that. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Barry Song <song.bao.hua@hisilicon.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20210402184544.488862-4-jic23@kernel.org
2021-04-07iio:adc:exynos-adc: Use new IRQF_NO_AUTOEN flag rather than separate ↵Jonathan Cameron
irq_disable() Disabling an irq before the driver has actually atempted to request it may work, but is definitely not as clean as just requesting it as normal but with the auto enable disabled. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Barry Song <song.bao.hua@hisilicon.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20210402184544.488862-3-jic23@kernel.org
2021-04-07iio:adc:ad7766: Use new IRQF_NO_AUTOEN to reduce boilerplateJonathan Cameron
As iio_poll_trigger() is safe against spurious interrupts when the trigger is not enabled, this is not a fix despite looking like a race. It is nice to simplify the code however so the interrupt is never enabled in the first place. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Barry Song <song.bao.hua@hisilicon.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20210402184544.488862-2-jic23@kernel.org
2021-04-07iio: buffer: use sysfs_attr_init() on allocated attrsAlexandru Ardelean
When dynamically allocating sysfs attributes, it's a good idea to call sysfs_attr_init() on them to initialize lock_class_keys. This change does that. The lock_class_keys are set when the CONFIG_DEBUG_LOCK_ALLOC symbol is enabled. Which is [likely] one reason why I did not see this during development. I also am not able to see this even with CONFIG_DEBUG_LOCK_ALLOC enabled, so this may [likely] be reproduce-able on some system configurations. This was reported via: https://lore.kernel.org/linux-iio/CA+U=DsrsvGgXEF30-vXuXS_k=-mjSjiBwEEzwKb1hJVn1P98OA@mail.gmail.com/T/#u Fixes: 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Link: https://lore.kernel.org/r/20210402174226.630346-1-aardelean@deviqon.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-04-07iio: trigger: Fix strange (ladder-type) indentationAndy Shevchenko
In some cases indentation looks a bit weird with starting from = sign and being in a ladder-type style. Unify it across the module. While at it, add blank line after definition block where it needed, Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210402174911.44408-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-04-07iio: trigger: Replace explicit casting and wrong specifier with proper oneAndy Shevchenko
By unknown reason device name is set with an index casted from int to unsigned long while at the same time with "%ld" specifier. Both parts seems wrong to me, thus replace replace explicit casting and wrong specifier with proper one, i.e. "%d". Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210402174911.44408-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-04-07iio: adc: stm32-dfsdm: drop __func__ while using Dynamic debugMugilraj Dhavachelvan
Dropped __func__ while using dev_dbg() and pr_debug() If the function name is desired, it can be configured using dynamic debug. Signed-off-by: Mugilraj Dhavachelvan <dmugil2000@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210401154343.41527-1-dmugil2000@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-04-07iio:adc: Drop false comment about lack of timestamp controlJonathan Cameron
The timestamp control has been a function implemented in the core of IIO for a long time, so this comment is incorrect and has clearly been cut and paste into all these drivers. The remainder of the comment added nothing and was confusing so dropped that as well. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/20210401145410.226917-1-jic23@kernel.org
2021-04-07iio:cdc:ad7150: Move driver out of staging.Jonathan Cameron
This capacitance to digital converter (CDC) driver is compliant with the IIO ABI. Note, not all features supported (e.g. window event modes) but the driver should be in a useful functional state. The cleanup was done against QEMU emulation of the device rather than actual hardware. Whilst this was a bit of an experiment, it made it easy to confirm that the driver remained in a consistent working state through the various refactors. If it worked in the first place, it should still be working after this cleanup. Given some IIO drivers require expensive hardware setups, (not particularly true with this one) the use of QEMU may provide a viable way forward for providing testing during code changes where previously we'd had to rely on sharp eyes and crossed fingers. Note, no explicit MAINTAINERS entry as it will be covered by the generic catch-alls for ADI and IIO drivers which are sufficient. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20210314181511.531414-25-jic23@kernel.org
2021-04-07iio:event: Add timeout event info typeJonathan Cameron
For adaptive threshold events, the current value is compared with a (typically) low pass filtered version of the same signal that slowly tracks large scale changes. However, sometimes a step change can result in a large lag before the low pass filtered version begins to track the signal again. Timeouts can be used to made an instantaneous 'correction'. Documentation of this attribute is added in a later patch. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20210314181511.531414-11-jic23@kernel.org
2021-04-07iio: inv_mpu6050: Make interrupt optionalLars-Peter Clausen
The inv_mpu6050 driver requires an interrupt for buffered capture. But non buffered reading for measurements works just fine without an interrupt connected. Make the interrupt optional to support this case. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Link: https://lore.kernel.org/r/20210325131046.13383-2-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-04-07iio: inv_mpu6050: Remove superfluous indio_dev->modes assignmentLars-Peter Clausen
The inv_mpu6050 driver manually assigns the indio_dev->modes property. But this is not necessary since it will be setup in iio_trigger_buffer_setup(). Remove the manual assignment. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Link: https://lore.kernel.org/r/20210325131046.13383-1-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-04-07iio: buffer: return 0 for buffer getfd ioctl handlerAlexandru Ardelean
As Lars pointed out, we could either return the FD vs memcpy-ing it to the userspace data object. However, this comment exposed a bug. We should return 0 or negative from these ioctl() handlers. Because an ioctl() handler can also return IIO_IOCTL_UNHANDLED (which is positive 1), which means that the ioctl() handler doesn't support this ioctl number. Positive 1 could also be a valid FD number in some corner cases. The reason we did this is to be able to differentiate between an error code and an unsupported ioctl number; for unsupported ioctl numbers, the main loop should keep going. Maybe we should change this to a higher negative number, to avoid such cases when/if we add more ioctl() handlers. Cc: Lars-Peter Clausen <lars@metafoo.de> Fixes: f73f7f4da5818 ("iio: buffer: add ioctl() to support opening extra buffers for IIO device") Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Link: https://lore.kernel.org/r/20210322084135.17536-1-aardelean@deviqon.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-04-07iio: Fix iio_read_channel_processed_scale()Linus Walleij
The code was checking if (ret) from the processed channel readout, not smart, we need to check if (ret < 0) as this will likely be something like IIO_VAL_INT. Fixes: 635ef601b238 ("iio: Provide iio_read_channel_processed_scale() API") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210323122705.1326362-1-linus.walleij@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-30iio/scmi: Port driver to the new scmi_sensor_proto_ops interfaceCristian Marussi
Port the scmi iio driver to the new SCMI sensor interface based on protocol handles and common devm_get_ops(). Link: https://lore.kernel.org/r/20210316124903.35011-26-cristian.marussi@arm.com Link: https://lore.kernel.org/r/20210330134711.1962-1-cristian.marussi@arm.com Acked-by: Jyoti Bhayana <jbhayana@google.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-03-29iio: adc: ad7923: register device with devm_iio_device_registerLucas Stankus
Registers the device using the devm variant. This is the final step of converting the ad7923 to only use devm routines, meaning that the ad7923_remove() function is no longer needed to release resources on device detach. Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/b0146465d52f4e259f5f95c83c71e72f065093da.1616966903.git.lucas.p.stankus@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-29iio: adc: ad7923: use device-managed function for triggered bufferLucas Stankus
Converts the iio_triggered_buffer_setup() call to its device-managed counterpart. With this, the error handling routine in the ad7923_probe() function becomes unnecessary as well as the iio_triggered_buffer_cleanup() call. Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/fe46a45caaa788f333d78367968272de728f4a6e.1616966903.git.lucas.p.stankus@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-29iio: adc: ad7923: use devm_add_action_or_reset for regulator disableLucas Stankus
Adds a device-managed action to handle disabling the driver's regulator on device detach. This slightly simplifies deinitialization and enables further conversion of the driver to device-managed routines without breaking the init order. Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/49a7c0436ca1186313dbccf3d810d0cf38cb5b37.1616966903.git.lucas.p.stankus@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-29iio: dac: Rudimentary typo fixBhaskar Chowdhury
s/concurent/concurrent/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210323012215.451075-1-unixbhaskar@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-29iio: imu: inv_mpu6050: Use as standalone triggerLinus Walleij
It may happen that the MPU6050 is the only hardware trigger available on your system such as this: > lsiio Device 003: hscdtd008a Device 001: mpu6050 Device 002: gp2ap002 Device 000: ab8500-gpadc Trigger 000: mpu6050-dev1 And when you want to use it to read periodically from your magnetometer like this: > iio_generic_buffer -a -c 100 -n hscdtd008a -t mpu6050-dev1 Then the following happens: [ 209.951334] Internal error: Oops: 5 [#1] SMP ARM (...) [ 209.981969] Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support) [ 209.988925] PC is at inv_scan_query_mpu6050+0x8/0xb8 [ 209.993914] LR is at inv_mpu6050_set_enable+0x40/0x194 This is because since we are not using any channels from the same device, the indio_dev->active_scan_mask is NULL. Just checking for that and bailing out is however not enough: we have to enable some kind of FIFO for the readout to work. So enable the temperature as a dummy FIFO and all works fine. Not suitable for backporting to stable. It is an odd corner case and does not represent a regression. Fixes: 09a642b78523 ("Invensense MPU6050 Device Driver.") Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Link: https://lore.kernel.org/r/20210322132408.1003443-1-linus.walleij@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-29iio:accel:adis16201: Fix wrong axis assignment that prevents loadingJonathan Cameron
Whilst running some basic tests as part of writing up the dt-bindings for this driver (to follow), it became clear it doesn't actually load currently. iio iio:device1: tried to double register : in_incli_x_index adis16201 spi0.0: Failed to create buffer sysfs interfaces adis16201: probe of spi0.0 failed with error -16 Looks like a cut and paste / update bug. Fixes tag obviously not accurate but we don't want to bother carry thing back to before the driver moved out of staging. Fixes: 591298e54cea ("Staging: iio: accel: adis16201: Move adis16201 driver out of staging") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: <Stable@vger.kernel.org> Cc: Himanshu Jha <himanshujha199640@gmail.com> Cc: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/20210321182956.844652-1-jic23@kernel.org
2021-03-29iio: dac: Convert powerdown read callbacks to sysfs_emit()Lars-Peter Clausen
Update DAC drivers powerdown attribute show callback to use the new sysfs_emit() function. sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in sanity checks. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20210320071405.9347-5-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-29iio: __iio_format_value(): Convert to sysfs_emit_at()Lars-Peter Clausen
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in sanity checks. Convert __iio_format_value() and related functions to use this new interface. This conversion involves changing the signature of __iio_format_value() so that it similar to sysfs_emit_at() and takes the buffers start address and an offset where to write within the buffer. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20210320071405.9347-4-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-29iio: iio_enum_available_read(): Convert to sysfs_emit_at()Lars-Peter Clausen
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in sanity checks. Convert the iio_enum_available_read() function to use sysfs_emit_at() instead of scnprintf(). The conversion is straight forward, the only difference is that sysfs_emit_at() takes the buffers start address and an offset as parameters and already knows about the buffer's size limit. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20210320071405.9347-3-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-29iio: core: Use sysfs_emit() (trivial bits)Lars-Peter Clausen
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in sanity checks. This patch converts the places in the iio core that follow the pattern of return s*printf(...) to return sysfs_emit(...) Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20210320071405.9347-2-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 08:21:52 +0000