summaryrefslogtreecommitdiff
path: root/drivers/iio/proximity/Makefile
AgeCommit message (Collapse)Author
2021-03-25iio: proximity: Add a ChromeOS EC MKBP proximity driverStephen Boyd
Add support for a ChromeOS EC proximity driver that exposes a "front" proximity sensor via the IIO subsystem. The EC decides when front proximity is near and sets an MKBP switch 'EC_MKBP_FRONT_PROXIMITY' to notify the kernel of proximity. Similarly, when proximity detects something far away it sets the switch bit to 0. For now this driver exposes a single sensor, but it could be expanded in the future via more MKBP bits if desired. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Benson Leung <bleung@chromium.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20210211024601.1963379-4-swboyd@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-21iio: proximity: Add driver support for vcnl3020 proximity sensorIvan Mikhaylov
Proximity sensor driver based on light/vcnl4000.c code. For now supports only the single on-demand measurement. The VCNL3020 is a fully integrated proximity sensor. Fully integrated means that the infrared emitter is included in the package. It has 16-bit resolution. It includes a signal processing IC and features standard I2C communication interface. It features an interrupt function. Datasheet: http://www.vishay.com/docs/84150/vcnl3020.pdf Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-21iio: Add SEMTECH SX9310/9311 sensor driverDaniel Campello
Add SEMTECH SX9310/9311 driver. The device has the following entry points: Usual frequency: - sampling_frequency - sampling_frequency_available Instant reading of current values for different sensors: - in_proximity0_raw - in_proximity1_raw - in_proximity2_raw - in_proximity3_comb_raw and associated events in events/ Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Enrico Granata <egranata@chromium.org> Signed-off-by: Daniel Campello <campello@chromium.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-12-01iio: ping: add parallax ping sensorsAndreas Klinger
Add support for parallax ping and laser ping sensors with just one pin for trigger and echo signal. This driver is based on srf04. In contrast to it it's necessary to change direction of the pin and to request the irq just for the period when the echo is rising and falling. Because this adds a lot of cases there is this individual driver for handling this type of sensors. Add a new configuration variable CONFIG_PING to Kconfig and Makefile. Julia reported an issue with failing to unlock a mutex in some error paths. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04mb1232.c: add distance iio sensor with i2cAndreas Klinger
Add I2CXL-MaxSonar ultrasonic distance sensors of types mb1202, mb1212, mb1222, mb1232, mb1242, mb7040, mb7137 using an i2c interface Implemented functionality: - reading the distance via in_distance_raw - buffered mode with trigger - make use of interrupt to announce completion of ranging Add mb1232 driver to Kconfig and Makefile Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-22iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor.Song Qiang
This driver was originally written by ST in 2016 as a misc input device driver, and hasn't been maintained for a long time. I grabbed some code from it's API and reformed it into an iio proximity device driver. This version of driver uses i2c bus to talk to the sensor and polling for measuring completes, so no irq line is needed. It can be tested with reading from /sys/bus/iio/devices/iio:deviceX/in_distance_input Signed-off-by: Song Qiang <songqiang1304521@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-07-23iio: light: isl29501: Add support for the ISL29501 ToF sensor.Mathieu Othacehe
This patch adds support for the ISL29501 Time of Flight sensor. Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-11-13Merge tag 'staging-4.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO updates from Greg KH: "Here is the "big" staging and IIO driver update for 4.15-rc1. Lots and lots of little changes, almost all minor code cleanups as the Outreachy application process happened during this development cycle. Also happened was a lot of IIO driver activity, and the typec USB code moving out of staging to drivers/usb (same commits are in the USB tree on a persistent branch to not cause merge issues.) Overall, it's a wash, I think we added a few hundred more lines than removed, but really only a few thousand were modified at all. All of these have been in linux-next for a while. There might be a merge issue with Al's vfs tree in the pi433 driver (take his changes, they are always better), and the media tree with some of the odd atomisp cleanups (take the media tree's version)" * tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits) staging: lustre: add SPDX identifiers to all lustre files staging: greybus: Remove redundant license text staging: greybus: add SPDX identifiers to all greybus driver files staging: ccree: simplify ioread/iowrite staging: ccree: simplify registers access staging: ccree: simplify error handling logic staging: ccree: remove dead code staging: ccree: handle limiting of DMA masks staging: ccree: copy IV to DMAable memory staging: fbtft: remove redundant initialization of buf staging: sm750fb: Fix parameter mistake in poke32 staging: wilc1000: Fix bssid buffer offset in Txq staging: fbtft: fb_ssd1331: fix mirrored display staging: android: Fix checkpatch.pl error staging: greybus: loopback: convert loopback to use generic async operations staging: greybus: operation: add private data with get/set accessors staging: greybus: loopback: Fix iteration count on async path staging: greybus: loopback: Hold per-connection mutex across operations staging: greybus/loopback: use ktime_get() for time intervals staging: fsl-dpaa2/eth: Extra headroom in RX buffers ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-14iio: proximity: Add rfd77402 driverPeter Meerwald-Stadler
Driver for RF Digital RFD77402 VCSEL (vertical-cavity surface-emitting laser) Time-of-Flight (ToF) sensor to measure distance up to 2 m with millimeter precision Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-02-04iio: distance: add devantech us ranger srf04Andreas Klinger
This patch adds support for the ultrasonic ranger srf04 of devantech. This device is measuring the distance of objects in a range between 1 cm and 3 meters and a theoretical resolution of 3 mm. There are two GPIOs used: - trigger: set as output to the device when the measurement should start - echo: set by the device when the ultrasonic wave is sent out and reset when the echo is recognized; this needs to be an interrupt input The time between setting and resetting the echo pin is the time the waveform needed for one round trip. This time is recorded in the interrupt handler. The distance is calculated in the read function by using the ultrasonic speed at 20 degrees celsius which is about 343 m/s. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-28iio: distance: srf08: add IIO driver for us rangerAndreas Klinger
This is the IIO driver for devantech srf08 ultrasonic ranger which can be used to measure the distances to an object. The sensor supports I2C with some registers. Supported Features include: - read the distance in ranging mode in centimeters - output of the driver is directly the read value - together with the scale the driver delivers the distance in meters - only the first echo of the nearest object is delivered - set sensitivity as analog value in the range of 0-31 means setting gain register on device - set range registers; userspace enters max. range in millimeters in 43 mm steps Features not supported by this driver: - ranging mode in inches or in microseconds - ANN mode - change I2C address through this driver - light sensor The driver was added in the directory "proximity" of the iio subsystem and the menu in den config is now called "Proximity and distance sensors" Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-31iio: proximity: add support for PulsedLight LIDARMatt Ranostay
Add support for the PulsedLight LIDAR rangefinder sensor which allows high speed (over 300Hz) distance measurements using Barker Coding within 40 meter range. Support only tested on the "blue label" rev 2, but may work using low sample frequencies on the original version. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-05iio: driver for Semtech SX9500 proximity solutionVlad Dogaru
Supports buffering, IIO events and changing sampling frequency. Datasheet available at: http://www.semtech.com/images/datasheet/sx9500_ag.pdf Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-03-16iio: Add AS3935 lightning sensor supportMatt Ranostay
AS3935 chipset can detect lightning strikes and reports those back as events and the estimated distance to the storm. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>