summaryrefslogtreecommitdiff
path: root/drivers/iio/adc
AgeCommit message (Collapse)Author
2018-04-05Merge tag 'gpio-v4.17-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.17 kernel cycle: New drivers: - Nintendo Wii GameCube GPIO, known as "Hollywood" - Raspberry Pi mailbox service GPIO expander - Spreadtrum main SC9860 SoC and IEC GPIO controllers. Improvements: - Implemented .get_multiple() callback for most of the high-performance industrial GPIO cards for the ISA bus. - ISA GPIO drivers now select the ISA_BUS_API instead of depending on it. This is merged with the same pattern for all the ISA drivers and some other Kconfig cleanups related to this. Cleanup: - Delete the TZ1090 GPIO drivers following the deletion of this SoC from the ARM tree. - Move the documentation over to driver-api to conform with the rest of the kernel documentation build. - Continue to make the GPIO drivers include only <linux/gpio/driver.h> and not the too broad <linux/gpio.h> that we want to get rid of. - Managed to remove VLA allocation from two drivers pending more fixes in this area for the next merge window. - Misc janitorial fixes" * tag 'gpio-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits) gpio: Add Spreadtrum PMIC EIC driver support gpio: Add Spreadtrum EIC driver support dt-bindings: gpio: Add Spreadtrum EIC controller documentation gpio: ath79: Fix potential NULL dereference in ath79_gpio_probe() pinctrl: qcom: Don't allow protected pins to be requested gpiolib: Support 'gpio-reserved-ranges' property gpiolib: Change bitmap allocation to kmalloc_array gpiolib: Extract mask allocation into subroutine dt-bindings: gpio: Add a gpio-reserved-ranges property gpio: mockup: fix a potential crash when creating debugfs entries gpio: pca953x: add compatibility for pcal6524 and pcal9555a gpio: dwapb: Add support for a bus clock gpio: Remove VLA from xra1403 driver gpio: Remove VLA from MAX3191X driver gpio: ws16c48: Implement get_multiple callback gpio: gpio-mm: Implement get_multiple callback gpio: 104-idi-48: Implement get_multiple callback gpio: 104-dio-48e: Implement get_multiple callback gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacks gpio: pci-idio-16: Implement get_multiple callback ...
2018-03-28Merge 4.16-rc7 into staging-nextGreg Kroah-Hartman
We want the IIO and staging driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18Merge tag 'v4.16-rc5' into develLinus Walleij
Linux 4.16-rc5 merged into the GPIO devel branch to resolve a nasty conflict between fixes and devel in the RCAR driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-14Merge tag 'iio-for-4.17b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of new device support, features and cleanup for IIO in the 4.17 cycle The uptick in staging cleanup is partly due to GSoC Applications process being underway and one of Daniel's tasks being to try cleaning up an IIO driver to move out of staging. Naturally there is some normal staging cleanup progress in here as well. New device support * Microchip mcp4018 - New driver supproting MCP4017, MCP4018 and MCP4019 digital pots. * On Semiconductor lv0104cs - New driver to support this ambient light sensor. Cleanup * axp20x_adc - remove a !! in favour of clear ternary operator. * ad2s1210 (staging cleanup) - Reorganise to avoid ending a line with [ - Remove some unnecessary defines. - Remove unsed variable. * ad5380 - Replace magic 0 with IIO_CHAN_INFO_RAW * ad5764 - Replace magic 0 with IIO_CHA_INFO_RAW * ad7150 (staging cleanup) - Align arguements with parenthesis. * ad7152 (staging cleanup) - Align arguements. * ad7746 (staging cleanup) - Align arguements. * ad7816 - Remove pointless void pointer cast. * ade7753 - Replace IIO_DEV_ATTR_CH_OFF with equivalent to avoid confusing checkpatch (this macro didn't really help anyway). Also drop the macro from the meter.h header. * ade7754 (staging cleanup) - Add names to funciton definition arguements. - Align arguements with open parenthesis where possible. * ade7758 (staging cleanup) - Remove __func__ from dev_dbg statements as provided by dynamic debug anyway. - Align arguements with open parenthesis where possible. * ade7759 (staging cleanup) - Replace IIO_DEV_ATTR_CH_OFF with equiavalent to avoid confusing checkpatch. * adis16201 (staging cleanup) - Headers in alphabetical order. - Blank lines before returns. * adis16209 (staging cleanup) - Headers in alphabetical order - Change some definition names to make them more meaningful (2 rounds of this). - Add explicit _REG prefix to register names to make them obviously different from fields within those registers. - Remove some superflous comments and group definitions better. - Use a switch statement to make it semantically obvious that we only have two options (rather than an unlimited 'else'). - Use sign_extent32 instead of open coding. * adt7316 (staging cleanup) - Move an export next to symbol. * bmc150 - drop redundant __func__ in dynamic debug. * ccs811 - Rename varaible to better reflect what it does. * cros_ec - Reduce sampling frequency before suspending to avoid preventing suspend. * dummy - Correct whitespace in Kconfig. - Add extra description in Kconfig. * ds1803 - Remove a VLA which we always know is 2 long. * hid-sensor-accel - Replace magic number 0 by IIO_CHAN_INFO_RAW. * hid-sensor-gyro - Replace magic number 0 by IIO_CHAN_INFO_RAW. * hid-sensor-light - Replace magic number 0 by IIO_CHAN_INFO_RAW. * hid-sensor-magn - Replace magic number 0 by IIO_CHAN_INFO_RAW. * lm3533 - Replace magic number 0 by IIO_CHAN_INFO_RAW * mlx90632 - Squash a smatch warning - no runtime effect. * stm32_dfsdm: - Cleanup the dt bindings. * sx9500 - Add GPIO ACPI mapping table to behave correctly when firmware doesn't provide the mapping. * tsl2x7x (staging cleanup) - Fix the proximity sensor functionality. - Remove platform data provided power functions. There are much better ways to do this these days. - Introduce some common functions to avoid various repititions. - Stop using mutex_trylock when mutex_lock and wait a bit is fine. - Improve error handling in various places. - Drop some 'Camel case' (which wasn't actually strickly camel case but was a bit odd. - Drop some _available sysfs attributes for things that don't exist (for particular supported parts).
2018-03-10iio: adc: meson-saradc: unlock on error in meson_sar_adc_lock()Dan Carpenter
The meson_sar_adc_lock() function is not supposed to hold the "indio_dev->mlock" on the error path. Fixes: 3adbf3427330 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-26Merge 4.16-rc3 into staging-nextGreg Kroah-Hartman
We want the IIO/Staging fixes in here, and to resolve a merge problem with the move of the fsl-mc code. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-24iio: adc: stm32-dfsdm: fix multiple channel initializationFabrice Gasnier
When several channels are registered (e.g. via st,adc-channels property): - channels array is wrongly filled in. Only 1st element in array is being initialized with last registered channel. Fix it by passing reference to relevant channel (e.g. array[index]). - only last initialized channel can work properly (e.g. unique 'ch_id' is used). Converting any other channel result in conversion timeout. Fix it by getting rid of 'ch_id', use chan->channel instead. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-24iio: adc: stm32-dfsdm: fix clock source selectionFabrice Gasnier
Add missing clock source selection. In case "audio" clock is provided, it's unused currently: "dfsdm" clock is wrongly used by default. Fixes: bed73904e76f ("IIO: ADC: add stm32 DFSDM core support") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-24iio: adc: stm32-dfsdm: fix call to stop channelFabrice Gasnier
stm32_dfsdm_stop_channel must be called with channel id, not filter id. Fixes: e2e6771c6462 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-24iio: adc: stm32-dfsdm: fix compatible data useFabrice Gasnier
Fix use of compatible data: stm32h7 regmap configuration is statically used. Rather use regmap_cfg from compatible data. Fixes: bed73904e76f ("IIO: ADC: add stm32 DFSDM core support") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-24iio: adc: axp20x_adc: remove !! in favor of ternary conditionQuentin Schulz
!!'s behaviour isn't that obvious and sparse complained about it, so let's replace it with a ternary condition. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-22iio: Change ISA_BUS_API dependency to selectionWilliam Breathitt Gray
The ISA_BUS_API Kconfig option enables the compilation of the ISA bus driver. The ISA bus driver does not perform any hardware interaction, and is instead just a thin layer of software abstraction to eliminate boilerplate code common to ISA-style device drivers. Since ISA_BUS_API has no dependencies and does not jeopardize the integrity of the system when enabled, drivers should select it when the ISA bus driver functionality is needed. Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-20Merge tag 'iio-for-4.17a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First round of new devices, features and cleanups for IIO in the 4.17 cycle. Outside of IIO * Strongly typed 64bit int_sqrt function needed by the mlx90632 New device support * adc081s - New driver supporting adc081s, adc101s and adc121s TI ADCs. * ad5272 - New driver supproting the ad5272 and ad5274 ADI digital potentiometers with DT bindings. * axp20x_adc - support the AXP813 ADC - includes rework patches to prepare for this. * mlx90632 - New driver with dt bindings for this IR temperature sensor. Features * axp20x_adc - Add DT bindings and probing. * dht11 - The sensor has a wider range than advertised in the datasheet - support it. * st_lsm6dsx - Add hardware timestamp su9pport. Cleanups * ABI docs - Update email contact for Matt Ranostay * SPDX changes - Matt Ranostay has moved his drivers over to SPDX. Currently we are making this an author choice in IIO. * ad7192 - Disable burnout current on misconfiguration. No actually effect as they simply won't work otherwise. * ad7476 - Drop a license definition that was replicating information in SPDX tag. * ade7758 - Expand buf_lock to cover both buffer and state protection allowing unintented uses of mlock in the core to be removed. * ade7759 - Align parameters to opening parenthesis. * at91_adc - Depend on sysfs instead of selecting it - for try wide consistency. * ccs811 - trivial naming type for a define. * ep93xx - Drop a redundant return as a result checking platform_get_resource. * hts221 - Regmap conversion which simplifies the driver somewhat. - Clean up some restricted endian cast warnings. - Drop a trailing whitespace from a comment - Drop an unnecessary get_unaligned by changing to the right 16bit data type. * ms5611 - Fix coding style in the probe function (whitespace) * st_accel - Use strlcpy instead of strncpy to avoid potentially truncating a string.
2018-02-20Merge tag 'iio-fixes-for-4.16a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of IIO fixes for the 4.16 cycle. One nasty very old crash around polling for buffers that aren't there - though that can only cause effects on drivers that support events but not buffers. * buffer / kfifo handling in the core. - Check there is a buffer and return 0 from poll directly if there isn't. Poll doesn't make sense in this circumstances, but best to close the hole. * ad5933 - Change the marked buffer mode to a software buffer as the meaning of the hardware buffer label has long since changed and this uses a front end software buffer anyway. * ad7192 - Fix the fact the external clock frequency was only set when using the internal clock which was less than helpful. * adis_lib - Initialize the trigger before requesting the interrupt. Some newer parts can power up with interrupt generation enabled so ordering now matters. * aspeed-adc - Fix an errror handling path as labels and general ordering were wrong. * srf08 - Fix a link error due to undefined devm_iio_triggered_buffer_setup. * stm32-adc - Fix error handling unwind squence in stm32h7_adc_enable.
2018-02-18iio: add SPDX identifier for various driversMatt Ranostay
Add GPLv2+ SPDX identifier and update email for author's drivers. Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-01Merge tag 'staging-4.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO updates from Greg KH: "Here is the big Staging and IIO driver patches for 4.16-rc1. There is the normal amount of new IIO drivers added, like all releases. The networking IPX and the ncpfs filesystem are moved into the staging tree, as they are on their way out of the kernel due to lack of use anymore. The visorbus subsystem finall has started moving out of the staging tree to the "real" part of the kernel, and the most and fsl-mc codebases are almost ready to move out, that will probably happen for 4.17-rc1 if all goes well. Other than that, there is a bunch of license header cleanups in the tree, along with the normal amount of coding style churn that we all know and love for this codebase. I also got frustrated at the Meltdown/Spectre mess and took it out on the dgnc tty driver, deleting huge chunks of it that were never even being used. Full details of everything is in the shortlog. All of these patches have been in linux-next for a while with no reported issues" * tag 'staging-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (627 commits) staging: rtlwifi: remove redundant initialization of 'cfg_cmd' staging: rtl8723bs: remove a couple of redundant initializations staging: comedi: reformat lines to 80 chars or less staging: lustre: separate a connection destroy from free struct kib_conn Staging: rtl8723bs: Use !x instead of NULL comparison Staging: rtl8723bs: Remove dead code Staging: rtl8723bs: Change names to conform to the kernel code staging: ccree: Fix missing blank line after declaration staging: rtl8188eu: remove redundant initialization of 'pwrcfgcmd' staging: rtlwifi: remove unused RTLHALMAC_ST and RTLPHYDM_ST staging: fbtft: remove unused FB_TFT_SSD1325 kconfig staging: comedi: dt2811: remove redundant initialization of 'ns' staging: wilc1000: fix alignments to match open parenthesis staging: wilc1000: removed unnecessary defined enums typedef staging: wilc1000: remove unnecessary use of parentheses staging: rtl8192u: remove redundant initialization of 'timeout' staging: sm750fb: fix CamelCase for dispSet var staging: lustre: lnet/selftest: fix compile error on UP build staging: rtl8723bs: hal_com_phycfg: Remove unneeded semicolons staging: rts5208: Fix "seg_no" calculation in reset_ms_card() ...
2018-01-30iio: adc: change license descriptionMilan Stevanovic
Using an SPDX tag. Remove a license notice to keep the whole purpose of using an SPDx id. Signed-off-by: Milan Stevanovic <milan.o.stevanovic@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-01-30iio: adc: driver for ti adc081s/adc101s/adc121sMilan Stevanovic
Add Linux device driver for TI single-channel CMOS 8/10/12-bit analog-to-digital converter with a high-speed serial interface. Signed-off-by: Milan Stevanovic <milan.o.stevanovic@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-01-30iio/adc: depend on SYSFS instead of selecting itRandy Dunlap
Drivers should not 'select' a subsystem. Instead they should depend on it. If the subsystem is disabled, the user probably did that for a purpose and one driver shouldn't be changing that. This also makes all IIO drivers consistent w.r.t depending on SYSFS instead of selecting it. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-01-30iio: adc: axp20x_adc: add support for AXP813 ADCQuentin Schulz
The X-Powers AXP813 PMIC is really close to what is already done for AXP20X/AXP22X. There are two pairs of bits to set the rate (one for Voltage and Current measurements and one for TS/GPIO0 voltage measurements) instead of one. The register to set the ADC rates is different from the one for AXP20X/AXP22X. GPIO0 can be used as an ADC (measuring Volts) unlike for AXP22X. The scales to apply to the different inputs are unlike the ones from AXP20X and AXP22X. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-01-30iio: adc: axp20x_adc: make it possible to probe from DTQuentin Schulz
To prepare for a future patch that will add a DT node for the ADC, make axp20x_adc able to probe from DT and get the per-variant data from of_device_id.data since platform_device_id.driver_data won't be set when probing by DT. Leave the ability to probe via platform for driver compatibility with old DTs. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-01-30iio: adc: axp20x_adc: put ADC rate setting in a per-variant functionQuentin Schulz
To prepare for a new comer that set a different register with different values, move rate setting in a function that is specific to each AXP variant. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-01-30iio: ep93xx: remove redundant return value check of platform_get_resource()Wei Yongjun
Remove unneeded error handling on the result of a call to platform_get_resource() when the value is passed to devm_ioremap_resource(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-01-28iio: adc: stm32: fix stm32h7_adc_enable error handlingFabrice Gasnier
Error handling in stm32h7_adc_enable routine doesn't unwind enable sequence correctly. ADEN can only be cleared by hardware (e.g. by writing one to ADDIS). It's also better to clear ADRDY just after it's been set by hardware. Fixes: 95e339b6e85d ("iio: adc: stm32: add support for STM32H7") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-01-18Merge remote-tracking branches 'asoc/topic/hisilicon', 'asoc/topic/iio', ↵Mark Brown
'asoc/topic/max98373' and 'asoc/topic/max98926' into asoc-next
2018-01-15IIO: ADC: stm32-dfsdm: fix static check warningArnaud Pouliquen
iio_priv does not return an error pointer, so check is not valid. Patch suppresses it. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-15IIO: ADC: stm32-dfsdm: code optimizationArnaud Pouliquen
Use of_device_get_match_data to optimize the source code. No check is needed on dev_data as match table is defined in driver. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-14iio: adc: aspeed: Fix error handling pathChristophe JAILLET
The labels and branching order of the error path of 'aspeed_adc_probe()' are broken. Re-order the labels and goto statements. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-01-11IIO: ADC: fix return value check in stm32_dfsdm_adc_probe()Wei Yongjun
In case of error, the function devm_iio_device_alloc() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: e2e6771c6462 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-11IIO: ADC: stm32-dfsdm: avoid unused-variable warningArnd Bergmann
Building with CONFIG_OF disabled produces a compiler warning: drivers/iio/adc/stm32-dfsdm-core.c: In function 'stm32_dfsdm_probe': drivers/iio/adc/stm32-dfsdm-core.c:245:22: error: unused variable 'pnode' [-Werror=unused-variable] This removes the variable and open-codes it in the only place it gets used to avoid that warning. Fixes: bed73904e76f ("IIO: ADC: add stm32 DFSDM core support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-10IIO: ADC: stm32_dfsdm_stop_filter() can be statickbuild test robot
Fixes: e2e6771c6462 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-10IIO: ADC: add stm32 DFSDM support for PDM microphoneArnaud Pouliquen
This code offers a way to handle PDM audio microphones in ASOC framework. Audio driver should use consumer API. A specific management is implemented for DMA, with a callback, to allows to handle audio buffers efficiently. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-10IIO: ADC: add STM32 DFSDM sigma delta ADC supportArnaud Pouliquen
Add DFSDM driver to handle sigma delta ADC. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-10IIO: ADC: add stm32 DFSDM core supportArnaud Pouliquen
Add driver for stm32 DFSDM pheripheral. Its converts a sigma delta stream in n bit samples through a low pass filter and an integrator. stm32-dfsdm-core driver is the core part supporting the filter instances dedicated to sigma-delta ADC or audio PDM microphone purpose. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-10IIO: ADC: add sigma delta modulator supportArnaud Pouliquen
Add generic driver to support sigma delta modulators. Typically, this device is hardware connected to an IIO device in charge of the conversion. Devices are bonded through the hardware consumer API. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08iio: adc: stm32: fix scan of multiple channels with DMAFabrice Gasnier
By default, watermark is set to '1'. Watermark is used to fine tune cyclic dma buffer period. In case watermark is left untouched (e.g. 1) and several channels are being scanned, buffer period is wrongly set (e.g. to 1 sample). As a consequence, data is never pushed to upper layer. Fix buffer period size, by taking scan channels number into account. Fixes: 2763ea0585c9 ("iio: adc: stm32: add optional dma support") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08Drivers:iio:adc:ti_am335x_adc remove comparison to boolVenkat Prashanth B U
This is the patch to the file ti_am335x_adc.c which fixes the following coccinelle warning: WARNING: Comparison to bool Signed-off-by: Venkat Prashanth B U <venkat.prashanth2498@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08iio: adc: ina2xx: Actually align the loop with the conversion ready flagStefan Brüns
Currently, the registers are read out once per conversion interval. If the reading is delayed as the conversion has not yet finished, this extra time is treated as being part of the readout, although it should delay the start of the poll interval. This results in the interval starting slightly earlier in each iteration, until all time between reads is spent polling the status registers instead of sleeping. To fix this, the delay has to account for the state of the conversion ready flag. Whenever the conversion is already finished, schedule the next read on the regular interval, otherwise schedule it one interval after the flag bit has been set. Split the work function in two functions, one for the status poll and one for reading the values, to be able to note down the time when the flag bit is raised. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08iio: adc: ina2xx: Align timestamp with conversion ready flagStefan Brüns
As the timestamp is no longer (ab-)used to measure the function run time, it can be taken at the correct time, i.e. when the conversion has finished. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08iio: adc: ina2xx: Use a monotonic clock for delay calculationStefan Brüns
The iio timestamp clock is user selectable and may be non-monotonic. Also, only part of the acquisition time is measured, thus the delay was longer than intended. Use a monotonic timestamp to track the time for the next poll iteration. The timestamp is advanced by the sampling interval each iteration. In case the conversion overrruns the register readout (i.e. fast sampling combined with a slow bus), one or multiple samples will be dropped. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08iio: adc: ina2xx: Make calibration register value fixedMaciej Purski
Calibration register is used for calculating current register in hardware according to datasheet: current = shunt_volt * calib_register / 2048 (ina 226) current = shunt_volt * calib_register / 4096 (ina 219) Fix calib_register value to 2048 for ina226 and 4096 for ina 219 in order to avoid truncation error and provide best precision allowed by shunt_voltage measurement. Make current scale value follow changes of shunt_resistor from sysfs as calib_register value is now fixed. Power_lsb value should also follow shunt_resistor changes as stated in datasheet: power_lsb = 25 * current_lsb (ina 226) power_lsb = 20 * current_lsb (ina 219) This is a part of the patchset: https://lkml.org/lkml/2017/11/22/394 Signed-off-by: Maciej Purski <m.purski@samsung.com> Reviewed-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08Drivers: iio:adc: fix brace coding style issue in at91_adc.cVenkat Prashanth B U
This is a patch to the at91_adc.c file that fixes up a brace warning found by the checkpatch.pl tool Signed-off-by: Venkat Prashanth B U <venkat.prashanth2498@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08iio: hx711: fix bug in reset functionalityAndreas Klinger
Return value in hx711_reset() should indicate status of dout otherwise the calling function is reporting an error as false positive If there are two reads too close to each other, then the second one will never succeed. This happens especially when using buffered mode with both channels enabled. When changing the channel on every trigger event the former 100 ms are not enough for waiting until the device indicates normal mode. Wait up to 1 second until the device turns into normal mode. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08iio: hx711: add triggered buffer supportAndreas Klinger
Add buffer to device data struct and add trigger function Data format is quite simple: voltage - channel 0 32 Bit voltage - channel 1 32 Bit timestamp 64 Bit Using both channels at the same time is working quite slow because of changing the channel which needs a dummy read. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08iio: adc: ina2xx: Do not udelay for several secondsStefan Brüns
The conversion time can be up to 16 seconds (8 ms per channel, 2 channels, 1024 times averaging). Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08iio: adc: ina2xx: Remove unneeded dummy read to clear CNVR flagStefan Brüns
Although the datasheet states the CNVR flag is cleared by reading the BUS_VOLTAGE register, it is actually cleared by reading any of the voltage/current/power registers. The behaviour has been confirmed by TI support: http://e2e.ti.com/support/amplifiers/current-shunt-monitors/f/931/p/647053/2378282 Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08iio: adc: ina2xx: Clarify size requirement for data bufferStefan Brüns
The timestamp is inserted into the buffer after the sample data by iio_push_to_buffers_with_timestamp, document the space requirement for the timestamp. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08iio: adc: ina2xx: Remove bogus cast for data argumentStefan Brüns
iio_push_to_buffers_with_timestamp expects a void pointer, so the cast is both unnecessary and misleading. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08iio: adc: meson-saradc: program the channel muxes during initializationMartin Blumenstingl
On some Meson8 devices the channel muxes are not programmed. This results in garbage values when trying to read channels that are not set up. Fix this by initializing the channel 0 and 1 muxes in MESON_SAR_ADC_CHAN_10_SW as well as the muxes for all other channels in MESON_SAR_ADC_AUX_SW based on what the vendor driver does (which is simply a 1:1 mapping of channel number and channel mux). This only showed up on Meson8 devices, because for GXBB and newer BL30 is taking care of initializing the channel muxes. This additionally fixes a typo in the MESON_SAR_ADC_AUX_SW_MUX_SEL_CHAN_MASK macro because the old definition assumed that the register fields were 2 bit wide, while they are actually 3 bit wide. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08iio: adc: meson-saradc: fix the clock frequency on Meson8 and Meson8bMartin Blumenstingl
GX SoCs use a 1.2 MHz ADC clock, while the older SoCs use a 1.14 MHz clock. A comment in the driver from Amlogic's GPL kernel says that it's running at 1.28 MHz. However, it's actually programming a divider of 20 + 1. With a XTAL clock of 24 MHz this results in a frequency of 1.14 MHz. (their calculation might be based on a 27 MHz XTAL clock, but this is not what we have on the Meson8 and Meson8b SoCs). The ADC was still working with the 1.2MHz clock. In my own tests I did not see a difference between 1.2 and 1.14 MHz (regardless of the clock frequency used, the ADC results were identical). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-05 02:25:34 +0000