summaryrefslogtreecommitdiff
path: root/drivers/iio/adc
AgeCommit message (Collapse)Author
2015-06-10Merge tag 'iio-for-v4.2c' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Third round of new IIO drivers, cleanups and functionality for the 4.2 cycle. Given Linus announced a 4.8rc coming up, hopefully time for one more lot of IIO patches this cycle. Some of these are actually improvements / fixes for patches earlier in the cycle. New device support * st_accel driver - support devices with 8 bit channels. Cleanup * A general cleanup of the iio tools under /tools/ from Hartmut. I'm more than a little embarassed by how bad some of these were! Are well, much more refined and less bug prone now. These cover lots of stuff like unhandled error returns, memory leaks as well as general refactoring to tidy the code up. * iio_simple_dummy - fix memory leaks in the init functions, drop some pointless error returns from functions that never generate errors and make the module parameter explicitly unsigned. * More buffer handling reworks from Lars-Peter, this time targetting hardware buffers (a little used corner that looks likely to get more use in the near future). Specifically: - Always compute the masklength as inkernel buffer users may need it. - Add a means of labeling which buffer modes a given buffer implementation supports. - In the case of hardware buffers, require strict scan matching rather than matching to a superset. Currently the demux is bypassed by these drivers (this may well not change for efficiency reasons) so allowing a superset of channels to be selected would otherwise lead to more data than requested confusing userspace. Driver funcationality improvments * mmc35240 - adds a compensation to the raw values as borrowed form Memsic's own input driver. * mma8452 - event support - event debouncing - high pass filter configuration - triggers * vf610 - allow conversion mode to be adjusted Fixlets * mmc35240 - Off by one error that by coincidence had no real effect. - i2c_device_name should be lowercase. - Lack of null terminator at end of attributes array. - Avoid computing the fractional part of the magnetic field by moving the scaling into userspace where floating point is available to simplify the maths. - Use a smaller sleep before assuming the measurement is done. This is safe and improves the possible polling rate. - Fix sensitivity on z-axis - datasheet disagrees with Memsic's releasedd code and the value used in the code seems to be correct. * stk3310 - make a local variable signed to ensure error handling works. * twl4030 - fix calculation of the temperature sense current - bug unlikely to have ever been noticed as the difference is small. - Fix errors in descriptions.
2015-06-08Merge 4.1-rc7 into staging-testingGreg Kroah-Hartman
We want the staging tree fixes in here too to help with testing and merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-07iio: adc: vf610: implement configurable conversion modesStefan Agner
Support configurable conversion mode through sysfs. So far, the mode used was low-power, which is enabled by default now. Beside that, the modes normal and high-speed are selectable as well. Use the new device tree property which specifies the maximum ADC conversion clock frequencies. Depending on the mode used, the available resulting conversion frequency are calculated dynamically. Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-07iio: adc: twl4030_madc: Fix description of twl4030_madc_set_current_generator()H. Nikolaus Schaller
The @chan parameter can be 0 or 1 and not a bit mask. Fix wrong description. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-07iio: adc: twl4030_madc: Fix calculation of the temperature sense currentH. Nikolaus Schaller
The bit mask to read the setting of the constant current source for measuring the NTC voltage was the wrong one. Since default value is initialized to the lowest level (000 = 10uA) the difference was probably never noticed in practice. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-24Merge tag 'iio-for-v4.2b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of new driver, functionality and cleanups for IIO in the 4.2 cycle. Core functionality * i and q modifiers from quadrature channels. * IIO_CHAN_INFO_OVERSAMPLING_RATIO added. * High pass filter attributes added to mirror the existing low pass filter ones. Core cleanups * Make IIO tools building more cross compiler friendly. * Substantial rework of the function __iio_update_buffers to greatly simplify a hideously evolved function. New drivers and support * ACPI0008 ambient light sensor driver. This one has been around a long time to will be good to finally get it into mainline. * Berlin SOC ADC support. * BMC150 magnetometer. The accelerometer in the same package has been supported for quite some time, so good to have this half as well. * m62332 DAC driver * MEMSIC MMC35420 magnetometer. * ROHM BH1710 and similar ambient light sensors. * Sensortek STK3310 light sensor. * Sensortek STK8312 accelerometer. * Sensortek STK8BA50 accelerometer. * ti-adc128s052 gains support form the adc122s021 2 channel ADC. Driver cleanups and functionality. * Allow various drivers to compile with !GPIOLIB if COMPILE_TEST enabled. * bmc150 - decouple trigger from buffer to allow other triggers to be used. * bmg160 - decouple trigger from buffer to allow other triggers to be used. Fix a trivial unused field. * Constify a load of platform_device_id structures. * inv_mpu6050 - device tree bindings. * hid-sensors - fix a memory leak during probe if certain errors occur. * ltr501 - illuminance channel derived (in an non obvious fashion) from the intensity channels. * ltr501 - fix a boundary check on the proximity threshold. * mlx90614 - drop a pointless return. * mma8452 - Debugfs register access and fix a bug that had no effect (by coincidence) * ti_am335x_adc - add device tree bindings for sample-delay, open-delay and averaging. The ideal settings for these tend to be board design specific.
2015-05-23iio:adc128s052: add support for adc122s021Urs Fässler
Signed-off-by: Urs Fässler <urs.fassler@bytesatwork.ch> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-23iio: adc: twl6030-gpadc: Fix modaliasAxel Lin
Remove extra space between platform prefix and DRIVER_NAME in MODULE_ALIAS. Signed-off-by: Axel Lin <axel.lin@ingics.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-23iio: adc: add support for BerlinAntoine Tenart
This patch adds the support of the Berlin ADC, available on Berlin SoCs. This ADC has 8 channels available, with one connected to a temperature sensor. The particularity here, is that the temperature sensor connected to the ADC has its own registers, and both the ADC and the temperature sensor must be configured when using it. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-18Merge 4.1-rc4 into staging-nextGreg Kroah-Hartman
We want the fixes in here for testing and merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-13Merge tag 'iio-fixes-for-4.1a-take2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: The usual mixed bag of fixes for IIO in the 4.1 cycle. Second version of this pull request as a small fix to a fix turned up before Greg pulled it for a cc10001 patch near the top of the tree. One core fix * Set updated for a iio kfifo was incorrectly set to false during a failed update, resulting in atttempts to repeat the failed operation appearing to succeed. This time I've decided to list the driver fixes in alphabetical order rather than 'randomly'. * axp288_adc - a recent change added a check for valid info masks when reading channels from consumer drivers. * bmp280 - temperature compensation was failing to read the tfine value, hence causing a temperature of 0 to always be returned and incorrect presure measurements. * cc10001 - Fix channel number mapping when some channels are reserved for remote CPUs. Fix an issue with the use of the power-up/power-down register (basically wrong polarity). Fix an issue due to the missinterpretting the return value from regulator_get_voltage. Add a delay before the start bit as recommended for the hardware to avoid data corruption. * hid pressure - fix channel spec of modfiied, but no modifier (which makes no sense!) * hid proximity - fix channel spec of modified, but no modifier (which makes no sense!). Fix a memory leak in the probe function. * mcp320x - occasional incorrect readings on dma using spi busses due to cacheline corruption. Fixed by forcing ___cacheline_aligned for the buffers. * mma9551 - buffer overrun fix (miss specified maximum length of buffers) * mma9553 - endian fix on status message. Add an enable element for activity channel. Input checking for activity period to avoid rather unpredictable results. * spmi-vadc - fix an overflow in the output value normalization seen on some boards. * st-snesors - oops due to use of a mutex that is not yet initialized during probe. * xilinx adc - Some wrong register addresses, a wrong address for vccaux channel, incorrect scale on VREFP and incorrect sign on VREFN.
2015-05-13iio: adc: ti_am335x_adc: make sample delay, open delay, averaging DT parametersVignesh R
Add optional DT properties to set open delay, sample delay and number of averages per sample for each adc step. Open delay, sample delay and averaging are some of the parameters that affect the sampling rate and accuracy of the sample. Making these parameters configurable via DT will help in balancing speed vs accuracy. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-12iio: adc: cc10001: Add delay before setting START bitNaidu Tellapati
According to hardware team there should be some delay after setting channel number, start mode and before setting START. Add a one microsecond delay for this purpose. Fixes: 1664f6a5b0c8 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-12iio: adc: cc10001: Fix regulator_get_voltage() return value checkNaidu Tellapati
regulator_get_voltage() returns a non-negative value in case of success, and a negative error in case of error. Let's fix this. Fixes: 1664f6a5b0c8 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-12iio: adc: cc10001: Fix incorrect use of power-up/power-down registerNaidu Tellapati
At present we are incorrectly setting the register to 0x1 to power up the ADC. Since it is an active high power down register, we need to set the register to 0x0 to actually power up. Conversely, writing 0x1 to the register powers it down. This commit adds a couple of helpers to make the code clearer and then use them to do the power-up/power-down properly. Fixes: 1664f6a5b0c8 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-10iio: adc: axp288: Constify platform_device_idKrzysztof Kozlowski
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-09Merge tag 'iio-for-v4.2a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First round of new drivers, functionality and cleanups for the 4.2 cycle New drivers / device support * st sensors driver, lsm303dlh magnetometer support. * ltr501 - support ltr301 and ltr559 chips. New functionality * IIO_CHAN_INFO_CALIBEMISSIVITY for thermopile sensors. * kxcjk1013 - make driver operational with external trigger. * Add iio targets to the tools Makefile. Cleanups * st sensors - more helpful error message if device id wrong or irq request fails, explicitly make the Block Data Update optional rather than relying on writes to address 0 not doing anything, make interrupt support optional (Not always wired, and not all devices actually have an interrupt line.) * kxcjk-1013 white space additions for readability, add the KXCJ9000 ACPI id as seen in the wild. * sx9500 - GPIO reset support, refactor the GPIO interrupt code, add power management, optimize power usage by powering down when possible, rename the gpio interrupt pin to be more useful, trivial return path simplification, trivial formatting fixes. * isl29018 - move towards ABI compliance with a view to moving this driver out of staging, add some brackets to ensure code works as expected. Note there is no actual bug as the condition being tested is always true (with current devices). * ltr501 - add regmap support to get caching etc for later patches, fix a parameter sanity check that always fails (bug introduced earlier in this series), ACPI enumeration support, interrupt rate control support, interrupt support in general and integration time control support, code alignment cleanups. * mma9553 - a number of little cleanups following a review from Hartmut after I'd already applied the original driver patch. * tmp006 - prefix some defines with TMP006 for consistency. * tsl4531 - cleanup some wrong prefixes, presumably from copy and paste. * mlx90614 - check for errors in read values, add power management, add emissivity setting, add device tree binding documentation, fix a duplicate const warning. * ti_am335x_adc - refactor the DT parsing into a separate function.
2015-05-08iio: adc: cc10001: Fix the channel number mappingNaidu Tellapati
When some of the ADC channels are reserved for remote CPUs, the scan index and the corresponding channel number doesn't match. This leads to convesion on the incorrect channel during triggered capture. Fix this by using a scan index to channel mapping encoded in the iio_chan_spec for this purpose while starting conversion on a particular ADC channel in trigger handler. Also, the channel_map is not really used anywhere but in probe(), so no need to keep track of it. Remove it from device structure. While here, add 1 to number of channels to register timestamp channel with the IIO core. Fixes: 1664f6a5b0c8 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-07iio: mcp320x: Fix occasional incorrect readingsMichael Welling
Without the cacheline alignment, the readings will occasionally incorrectly return 0. Signed-off-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-19iio: adc: xilinx: Fix VREFN signThomas Betker
The VREFN channel is bipolar, not unipolar. Small negative values do occur (e.g., -1mV), and unsigned conversion maps them incorrectly to large positive values (about +1V), so fix this. Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-19iio: adc: xilinx: Fix VREFP scaleThomas Betker
The scaling factor for VREFP is 3.0/4096, not 1.0/4096; fix this to get correct readings. Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-19iio: adc: xilinx: Fix "vccaux" channel .addressThomas Betker
For the "vccaux" channel, read the VCCAUX register, not VCCINT. Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-19iio: adc: xilinx: Fix register addressesThomas Betker
Define the register addresses for MIN_VCCPINT, MIN_VCCPAUX, MIN_VCCO_DDR correctly. Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-18iio: adc: spmi-vadc: Fix overflow in output value normalizationIvan T. Ivanov
With 'dx' equal to 0.625V and 15 bit ADC, calculations overflow when difference against GND is ~20% of the ADC range. Fix this. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Usual trivial tree updates. Nothing outstanding -- mostly printk() and comment fixes and unused identifier removals" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: goldfish: goldfish_tty_probe() is not using 'i' any more powerpc: Fix comment in smu.h qla2xxx: Fix printks in ql_log message lib: correct link to the original source for div64_u64 si2168, tda10071, m88ds3103: Fix firmware wording usb: storage: Fix printk in isd200_log_config() qla2xxx: Fix printk in qla25xx_setup_mode init/main: fix reset_device comment ipwireless: missing assignment goldfish: remove unreachable line of code coredump: Fix do_coredump() comment stacktrace.h: remove duplicate declaration task_struct smpboot.h: Remove unused function prototype treewide: Fix typo in printk messages treewide: Fix typo in printk messages mod_devicetable: fix comment for match_flags
2015-04-13Merge tag 'staging-4.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here's the big staging driver patchset for 4.1-rc1. There's a lot of patches here, the Outreachy application period happened during this development cycle, so that means that there was a lot of cleanup patches accepted. Other than the normal coding style and sparse fixes here, there are some driver updates and work toward making some of the drivers into "mergable" shape (like the Unisys drivers.) All of these have been in linux-next for a while" * tag 'staging-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1214 commits) staging: lustre: orthography & coding style staging: lustre: lnet: lnet: fix error return code staging: lustre: fix sparse warning Revert "Staging: sm750fb: Fix C99 Comments" Staging: rtl8192u: use correct array for debug output staging: rtl8192e: Remove dead code staging: rtl8192e: Comment cleanup (style/format) staging: rtl8192e: Fix indentation in rtllib_rx_auth_resp() staging: rtl8192e: Decrease nesting of rtllib_rx_auth_resp() staging: rtl8192e: Divide rtllib_rx_auth() staging: rtl8192e: Fix PRINTK_WITHOUT_KERN_LEVEL warnings staging: rtl8192e: Fix DO_WHILE_MACRO_WITH_TRAILING_SEMICOLON warning staging: rtl8192e: Fix BRACES warning staging: rtl8192e: Fix LINE_CONTINUATIONS warning staging: rtl8192e: Fix UNNECESSARY_PARENTHESES warnings staging: rtl8192e: remove unused EXPORT_SYMBOL_RSL macro staging: rtl8192e: Fix RETURN_VOID warnings staging: rtl8192e: Fix UNNECESSARY_ELSE warning staging: rtl8723au: Remove unneeded comments staging: rtl8723au: Use __func__ in trace logs ...
2015-04-13Merge tag 'for-v4.1' of git://git.infradead.org/battery-2.6Linus Torvalds
Pull power supply and reset changes from Sebastian Reichel: - new API for safe access of power supply function attrs - devres support for power supply (un)registration - new drivers / chips: - generic syscon based poweroff driver - iio & charger driver for da9150 - fuel gauge driver for axp288 - bq27x00: add support for bq27510 - bq2415x: add support for bq24157s - twl4030-madc-battery: convert to iio consumer - misc fixes * tag 'for-v4.1' of git://git.infradead.org/battery-2.6: (66 commits) power: twl4030_madc_battery: Add missing MODULE_ALIAS power: twl4030-madc-battery: Convert to iio consumer. dt: power: Add docs for generic SYSCON poweroff driver. power: reset: Add generic SYSCON register mapped poweroff. power: max17042_battery: add missed blank power: max17042_battery: Use reg type instead of chip type power/reset: at91: big endian fixes for atsama5d3x power_supply: charger-manager: Fix dereferencing of ERR_PTR HID: input: Fix NULL pointer dereference when power_supply_register fails power: constify of_device_id array power/reset/rmobile-reset.c: Fix !HAS_IOMEM build power_supply: 88pm860x_charger: Fix possible NULL pointer dereference and use of initialized variable arm: mach-pxa: Decrement the power supply's device reference counter mfd: ab8500: Decrement the power supply's device reference counter power_supply: bq2415x_charger: Decrement the power supply's device reference counter power_supply: 88pm860x_charger: Decrement the power supply's device reference counter x86/olpc/xo15/sci: Use newly added power_supply_put API x86/olpc/xo1/sci: Use newly added power_supply_put API power_supply: charger-manager: Decrement the power supply's device reference counter power_supply: Increment power supply use counter when obtaining references ...
2015-04-09iio/axp288_adc: add missing channel info maskJacob Pan
Commit 65de7654d39c70c2b ("iio: iio: Fix iio_channel_read return if channel havn't info") added a check for valid info masks. This patch adds missing channel info masks for all ADC channels. Otherwise, iio_read_channel_raw() would return -EINVAL when called by consumer drivers. Note that the change of _processed to _raw actually fixes an ABI abuse in the original driver where it was used to avoid some special handling rather than because it was correct. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-09iio: adc: ti_am335x_adc: refactor DT parsing into a functionVignesh R
Refactor DT parsing into a separate function from probe() to help addition of more DT parameters later. No functional changes. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-07Merge 4.0-rc7 into staging-nextGreg Kroah-Hartman
We want those fixes (iio primarily) into the -next branch to help with merge and testing issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-28iio: adc: vf610: use ADC clock within specificationStefan Agner
Depending on conversion mode used, the ADC clock (ADCK) needs to be below a maximum frequency. According to Vybrid's data sheet this is 20MHz for the low power conversion mode. The ADC clock is depending on input clock, which is the bus clock by default. Vybrid SoC are typically clocked at at 400MHz or 500MHz, which leads to 66MHz or 83MHz bus clock respectively. Hence, a divider of 8 is required to stay below the specified maximum clock of 20MHz. Due to the different bus clock speeds, the resulting sampling frequency is not static. Hence use the ADC clock and calculate the actual available sampling frequency dynamically. This fixes bogous values observed on some 500MHz clocked Vybrid SoC. The resulting value usually showed Bit 9 being stuck at 1, or 0, which lead to a value of +/-512. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Fugang Duan <B38611@freescale.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-28iio/adc/cc10001_adc.c: Fix !HAS_IOMEM buildRichard Weinberger
Fixes: drivers/built-in.o: In function `cc10001_adc_probe': cc10001_adc.c:(.text+0x412e92): undefined reference to `devm_ioremap_resource' Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-24Merge tag 'iio-for-4.1a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new drivers, cleanups and functionality for IIO in the 4.1 cycle. New drivers * CM3323 color sensor. * MS5611 pressure and temperature sensor. New functionality * mup6050 - create mux clients for devices described via ACPI. The reasoning and approach taken in this patch are complex. Basically there is no otherway of finding out what is there than by some esoteric look ups in the ACPI data. * cm3232 - PM support * itg3200 - suspend/resume support * mcp320x - add more ADCs to the kconfig to reflect what the driver supports (this patch and the bindings got left behind when the support was added a while back). Docs / utils * ti-adc128s052 - DT bindings. * mcp3422 - DT bindings. * mcp320x - DT bindings * ABI docs for event threshold scale attributes, in_magn_offset, proximity scan_element and thresh falling/rising values for accelerometers. All elements long in use that have slipped by being explicitly documented. * Tidy up the tools previously in drivers/staging/iio/Documentation and move them out to /tools/iio. Yet another move that should have happened long ago. This time Roberta Dobrescu did the leg work. Thanks! Core Cleanups * Export userspace IIO headers. We should have done the appropriate header splitting a long time ago. Thanks to Daniel for sorting this out. * Refactor the registring of attributes for buffers to move all non-custom ones to a vector allowing easier additions to the current set in the future. Driver Cleanups * gpiod related cleanups. Make use of the additional parameter to specify initial direciton to avoid extra code. * bmc150 - Various refactorings to reduce code repitition and prepare for hardware buffer support. Some of these cleanups are good even without the new functionality. * kmx61 - direct use of index to an array avoiding a structure element which was always the index to an element in an array of that structure. * vf610 - avoid incorrect type for return from wait_for_completion_timeout. * gp2ap020a00f - use put_unaligned_le32 for slight code simplification. * ade7754 - improve error handling including suppressing some build warnings. * ade7759 - improve error handling including suppressing some build warnings. * hmc5843 - Long line and indentation fixes. Also some constifying of various constant data. * ade7854 - 80+ character line splitting. * ad2s1210 - fix wrong printf format string. * mxs-lradc - fix wrong printf format string. * ade7954-i2c - code alignment fixes and other trivial but worthwhile bits. * periodic rtc trigger - make the frequency type an unsigned int as it is always treated as such. * jsa1212 - constify struct regmap_config as it is constant. * ad7793 - typo in the MODULE_DESCRIPTION * mma9551 - check gpiod_to_irq errors. Note that this doesn't actually cause any trouble but is worth tidying up as obviously incorrect. * mlx90614 - refactor the register symbols to make it clear which reads are to RAM not PROM.
2015-03-12iio: adc: Kconfig mcp320x change description Add more ADCsSøren Andersen
Bring the Kconfig entry up to date with parts supported by the driver. Signed-off-by: Soeren Andersen <san@rosetechnology.dk> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-07iio:adc: Fix typo in MODULE_DESCRIPTION in ad7793.cMasanari Iida
This patch fix spelling typo in MODULE_DESCRIPTION Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-07iio: fix drivers that check buffer->scan_maskOctavian Purdila
If the in-kernel push interface is used we may have a different masks on the device buffer and the kernel buffer and in this case the device should generate data for the reunion of the buffers, which is available at indio_dev->active_scan_mask. Compiled tested only except for bmc150-accel which was tested at runtime with the hardware. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-06treewide: Fix typo in printk messagesMasanari Iida
This patch fix spelling typo in printk messages. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-28Merge tag 'iio-fixes-for-4.0a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of fixes for IIO in the 4.0 cycle. Note a followup set dependent on patches in the recent merge windows will follow shortly. * dht11 - fix a read off the end of an array, add some locking to prevent the read function being interrupted and make sure gpio/irq lines are not enabled for irqs during output. * iadc - timeout should be in jiffies not msecs * mpu6050 - avoid a null id from ACPI emumeration being dereferenced. * mxs-lradc - fix up some interaction issues between the touchscreen driver and iio driver. Mostly about making sure that the adc driver only affects channels that are not being used for the touchscreen. * ad2s1200 - sign extension fix for a result of c type promotion. * adis16400 - sign extension fix for a result of c type promotion. * mcp3422 - scale table was transposed. * ad5686 - use _optional regulator get to avoid a dummy reg being allocate which would cause the driver to fail to initialize. * gp2ap020a00f - select REGMAP_I2C * si7020 - revert an incorrect cleanup up and then fix the issue that made that cleanup seem like a good idea.
2015-02-25iio: Add support for DA9150 GPADCAdam Thomson
This patch adds support for DA9150 Charger & Fuel-Gauge IC GPADC. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-15Merge tag 'staging-3.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging drivers patches from Greg KH: "Here's the big staging driver tree update for 3.20-rc1. Lots of little things in here, adding up to lots of overall cleanups. The IIO driver updates are also in here as they cross the staging tree boundry a lot. I2O has moved into staging as well, as a plan to drop it from the tree eventually as that's a dead subsystem. All of this has been in linux-next with no reported issues for a while" * tag 'staging-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (740 commits) staging: lustre: lustre: libcfs: define symbols as static staging: rtl8712: Do coding style cleanup staging: lustre: make obd_updatemax_lock static staging: rtl8188eu: core: switch with redundant cases staging: rtl8188eu: odm: conditional setting with no effect staging: rtl8188eu: odm: condition with no effect staging: ft1000: fix braces warning staging: sm7xxfb: fix remaining CamelCase staging: sm7xxfb: fix CamelCase staging: rtl8723au: multiple condition with no effect - if identical to else staging: sm7xxfb: make smtc_scr_info static staging/lustre/mdc: Initialize req in mdc_enqueue for !it case staging/lustre/clio: Do not allow group locks with gid 0 staging/lustre/llite: don't add to page cache upon failure staging/lustre/llite: Add exception entry check after radix_tree staging/lustre/libcfs: protect kkuc_groups from write access staging/lustre/fld: refer to MDT0 for fld lookup in some cases staging/lustre/llite: Solve a race to access lli_has_smd in read case staging/lustre/ptlrpc: hold rq_lock when modify rq_flags staging/lustre/lnet: portal spreading rotor should be unsigned ...
2015-02-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "The first round of updates for the input subsystem. A few new drivers (power button handler for AXP20x PMIC, tps65218 power button driver, sun4i keys driver, regulator haptic driver, NI Ettus Research USRP E3x0 button, Alwinner A10/A20 PS/2 controller). Updates to Synaptics and ALPS touchpad drivers (with more to come later), brand new Focaltech PS/2 support, update to Cypress driver to handle Gen5 (in addition to Gen3) devices, and number of other fixups to various drivers as well as input core" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits) Input: elan_i2c - fix wrong %p extension Input: evdev - do not queue SYN_DROPPED if queue is empty Input: gscps2 - fix MODULE_DEVICE_TABLE invocation Input: synaptics - use dmax in input_mt_assign_slots Input: pxa27x_keypad - remove unnecessary ARM includes Input: ti_am335x_tsc - replace delta filtering with median filtering ARM: dts: AM335x: Make charge delay a DT parameter for TSC Input: ti_am335x_tsc - read charge delay from DT Input: ti_am335x_tsc - remove udelay in interrupt handler Input: ti_am335x_tsc - interchange touchscreen and ADC steps Input: MT - add support for balanced slot assignment Input: drv2667 - remove wrong and unneeded drv2667-haptics modalias Input: drv260x - remove wrong and unneeded drv260x-haptics modalias Input: cap11xx - remove wrong and unneeded cap11xx modalias Input: sun4i-ts - add support for touchpanel controller on A31 Input: serio - add support for Alwinner A10/A20 PS/2 controller Input: gtco - use sign_extend32() for sign extension Input: elan_i2c - verify firmware signature applying it Input: elantech - remove stale comment from Kconfig Input: cyapa - off by one in cyapa_update_fw_store() ...
2015-02-04iio: vf610_adc: cleanup wait_for_completion return handlingNicholas Mc Guire
return type of wait_for_completion_timeout is unsigned long not int, this patch only fixes up the return handling. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-02-04iio:adc:mcp3422 Fix incorrect scales tableAngelo Compagnucci
This patch fixes uncorrect order of mcp3422_scales table, the values was erroneously transposed. It removes also an unused array and a wrong comment. Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com> Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-02-03Input: ti_am335x_tsc - interchange touchscreen and ADC stepsBrad Griffis
This patch makes the initial changes required to workaround TSC-false pen-up interrupts. It is required to implement these changes in order to remove udelay in the TSC interrupt handler and false pen-up events. The charge step is to be executed immediately after sampling X+. Hence TSC is made to use higher numbered steps (steps 5 to 16 for 5 co-ordinate readouts, 4 wire TSC configuration) and ADC to use lower ones. Further X co-ordinate readouts must be the last to be sampled, thus co-ordinates are sampled in the order Y-Z-X. Signed-off-by: Brad Griffis <bgriffis@ti.com> [vigneshr@ti.com: Ported the patch from v3.12 to v3.19rc1] Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-01-29iio: adc: Cosmic Circuits 10001 ADC driverPhani Movva
This commit adds support for Cosmic Circuits 10001 10-bit ADC device. Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Phani Movva <Phani.Movva@imgtec.com> Signed-off-by: Naidu Tellapati <Naidu.Tellapati@imgtec.com> [ezequiel: code style cleaning] Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-28iio: vadc: Qualcomm SPMI PMIC voltage ADC driverStanimir Varbanov
The voltage ADC is peripheral of Qualcomm SPMI PMIC chips. It has 15bits resolution and register space inside PMIC accessible across SPMI bus. The vadc driver registers itself through IIO interface. Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-21Merge tag 'iio-for-3.20a_take2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing Jonathan writes: First round of IIO new drivers, cleanups and functionality for the 3.20 cycle take 2 Updated pull request with Daniel's fix on top for the power management Kconfig changes that had snuck in since last update of the IIO tree worked it's way through from mainline. Original pull message New device support * jsa1212 proxmity / ambient light sensor * SM08500 supported added to the kxcjk-1013 accelerometer driver * KMX61 Accelerometer/Magnetometer. This took a somewhat rocky path being first merged, then reverted for a rewrite after a discussion of how to support additional functionality and finally being merged prior to some last reviews coming in, with resultant follow up patches. * Freescale mma9551l driver (minor follow up warning supression patch). * Semtech SX9500 proximity device driver. * ak8975 gains support for ak09911 and ak09912 and drop the standalone driver for the ak09911. New functionality * Dummy driver gains some virtual registers making it more flexible. * IIO_ACTIVITY channel types, with modifiers running, walking etc. This is to support on chip motion clasifiers. As such it is in the form of a confidence percentage. The only devices so far only do binary decisions but this gives us room when other devices give more nuanced clasification. * IIO_EV_DIR_NONE type for events where there is no obvious direction. First case is step detection. * IIO_STEPS channel type for pedometers. * ENABLE mask element used to control turning on counting types such as the pedometer that need a 'start point'. * INSTANCE event type to support things that happen once. * info element for height calibration (used in various motion estimation algorithms). Note heigh tof use * dummy driver demonstration of the use of all the new bits above. * event monitor support for the new events. * inv_mpu6050 gains an i2c mux to allow bypassing the device to access additional devices connected on the other side of it. Note that in Windows these are handled by firmware on the device and not exposed directly. * inv_mpu6050 gains ACPI enumeration. * inkern interface gains iio_write_channel_raw to allow in kernel users of DAC functionality via a simple wrapper. * Document input current readings in the ABI docs. * Add an error message when we get an out of range error in device tree processing for the in kernel interfaces. Basically a device tree debugging aid. * Add a sanity check that a scan index for a channel is unique during registration. There to help catch bugs as this should never happen in a bug free driver. Cleanups and fixlets A rework of buffer registration from Lars - a precursor to some other upcoming new stuff (a few patches from others rolled in here as well). * Ensure all drivers register the same channels for the device and buffer. * Move buffer registration into the core rather than using the old two step approach. Now we have simple ways of using a unified set channels for both without requiring channels be exposed by both interface, this removes a fair bit of boilerplate. * Stop sca3000 and ad5933 (both in staging) enabling buffer channels by default. It has long be convention in IIO to startup with no channels enabled and leave it up to userspace to say what goes in the buffer. Getting rid of these allows us to drop export of iio_scan_mask_set. * Drop get_bytes_per_datum from iio_buffer_access_funcs as not been used for a while. * Allocate standard buffer attributes in the core rather than in every driver with a buffer. * Make the length attribute read only when a driver is not able to set the length. * Drop the get_length callback for buffers as it is already available in struct iio_buffer. * Drop an unused arguement form iio_kfifo_allocate and add devm allocator for it. * some kconfig entries gain anotation with the resulting module name. * Fix a resulting compile issue in dummy driver due to a stub taking wrong parameters as a result of the above rework. * Fix an off by 2 error in copying the core assigned buffer attributes. Other cleanups, * Trivial space before comma fixups. * ak8975 fixlets - none critical. Rework to allow more device support. * Drop unnecessary sizeof(u8) calls. * bmp280 - refactor the compensation code to reduce copy operations and code length. A second patch futher optimized this and performed some other minor cleanups. * kxcjk-1013 - various power control cleanups to avoid unnecessary enable / disable of device. Make sure it is only controlled at all if CONFIG_PM is enabled. Also som cleanups of error paths. * Small cleanups in adf4530 driver - pointless message and unnecessary braces. * Clarifiy the proximity ABI docs to make it clear it should get bigger as we move futher away. * Drop a misleading comment form industrialio-core.c * Trivial white space cleanups. * sca3000 looses an unused debug function. * Fix char unsigned ordering in ad8366 * Increase the sleep time in ad9523 to make it predictable (value didn't really matter so make it more than 20 msecs) * mxs-lradc touchscreen property cleanups in device tree are fixed to ensure the meet all the 'interesting' documentation. * A couple of cleanups for the staging ad5933 driver to avoid unnecessary conversion to a processed temperature vlaue in kernel and remove platform data form the state structure as not needed after probe. * Fix a wrong scale factor in the docs. Misc * Add IIO include files to the maintainers entry.
2015-01-10iio: iadc: wait_for_completion_timeout time in jiffiesNicholas Mc Guire
The timeout value to wait_for_completion_timeout is in jiffies but the value being passed seems like it was intended to by microseconds Note that the timeout was extremely long thus it might be too short now. In any case it probably should be passed through usecs_to_jiffies() or msecs_to_jiffies() patch is against linux-next 3.19.0-rc1 -next-20141226 patch was only compile-tested x86_64_defcofnig + CONFIG_SPMI=m CONFIG_IIO=m, CONFIG_QCOM_SPMI_IADC=m Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at> Acked-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-08Merge tag 'iio-fixes-for-3.19a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of IIO fixes for the 3.19 cycle. * ad799x fix ad7991/ad7995/ad7999 setup as they do not have a configuration register to write to. It is written during the convesion sequence. As such we don't want to write to it at other times. * Fix iio_channel_read utility function to return to ensure it is apparent if the relevant element is not there. This avoids using a wrong value if some channels have the element and others do not.
2014-12-26iio: kfifo: Remove unused argument in iio_kfifo_allocateKarol Wrona
indio_dev was unused in function body plus some small style fix - add new lines after "if(sth) return sth" and before the last return statement. The argument was removed also in its client. Signed-off-by: Karol Wrona <k.wrona@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>