summaryrefslogtreecommitdiff
path: root/drivers/iio/adc/ad799x.c
AgeCommit message (Collapse)Author
2019-12-15iio: adc: ad799x: add pm_ops to disable the device completelyMarco Felsch
The device is always in a low-power state due to the hardware design. It wakes up upon a conversion request and goes back into the low-power state. The pm ops are added to disable the device completely and to free the regulator. Disbaling the device completely should be not that notable but freeing the regulator is important. Because if it is a shared power-rail the regulator won't be disabled during suspend-to-ram/disk and so all devices connected to that rail keeps on. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-10-09iio: adc: ad799x: fix probe error handlingMarco Felsch
Since commit 0f7ddcc1bff1 ("iio:adc:ad799x: Write default config on probe and reset alert status on probe") the error path is wrong since it leaves the vref regulator on. Fix this by disabling both regulators. Fixes: 0f7ddcc1bff1 ("iio:adc:ad799x: Write default config on probe and reset alert status on probe") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-19drivers: iio: Update MODULE AUTHOR email addressMichael Hennerich
no functional changes Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-22iio:adc: drop assign iio_info.driver_module and iio_trigger_ops.ownerJonathan Cameron
The equivalent of both of these are now done via macro magic when the relevant register calls are made. The actual structure elements will shortly go away. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2017-03-29iio: adc: ad799x: constify attribute_group structuressimran singhal
Check for attribute_group structures that are only stored in the event_attrs filed of iio_info structure. As the event_attrs field of iio_info structures is constant, so these attribute_group structures can also be declared constant. Done using coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct attribute_group i@p = {...}; @ok1@ identifier r1.i; position p; struct iio_info x; @@ x.event_attrs=&i@p; @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct attribute_group i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct attribute_group i; File size before: text data bss dec hex filename 26051 464 0 26515 6793 drivers/iio/adc/ad799x.o File size after: text data bss dec hex filename 26115 400 0 26515 6793 drivers/iio/adc/ad799x.o Signed-off-by: simran singhal <singhalsimran0@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-08-15iio: ad799x: Fix buffered capture for ad7991/ad7995/ad7999Lars-Peter Clausen
The data buffer for captured mode for the ad799x driver is allocated in the update_scan_mode() callback. This callback is not set in the iio_info struct for the ad7791/ad7995/ad7999, which means that the data buffer is not allocated when a captured transfer is started. As a result the driver crashes when the first sample is received. To fix this properly set the update_scan_mode() callback. Fixes: d8dca33027c1 ("staging:iio:ad799x: Preallocate sample buffer") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-07-03iio: adc: add missing of_node references to iio_devMatt Ranostay
Adding missing indio_dev->dev.of_node references to allow iio consumers to access the device channels. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-30iio:core: timestamping clock selection supportGregor Boirie
Adds a new per-device sysfs attribute "current_timestamp_clock" to allow userspace to select a particular POSIX clock for buffered samples and events timestamping. Following clocks, as listed in clock_gettime(2), are supported: CLOCK_REALTIME, CLOCK_MONOTONIC, CLOCK_MONOTONIC_RAW, CLOCK_REALTIME_COARSE, CLOCK_MONOTONIC_COARSE, CLOCK_BOOTTIME and CLOCK_TAI. Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Acked-by: Sanchayan Maity <maitysanchayan@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29iio: adc: ad799x: use iio helper function to guarantee direct modeAlison Schofield
Replace the code that guarantees the device stays in direct mode with iio_device_claim_direct_mode() which does same. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Acked-by: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-16iio: adc: ad799x: remove space before commaSlawomir Stepien
This fixes the error reported by checkpatch.pl: ERROR: space prohibited before that ',' (ctx:WxW) Signed-off-by: Slawomir Stepien <sst@poczta.fm> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-30iio: adc: ad799x: leave sysfs naming to the coreMartin Kepplinger
This shouldn't change anything since the core calls the events folder "events" anyways. Signed-off-by: Martin Kepplinger <martink@posteo.de> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12iio: ad799x: Fix ad7991/ad7995/ad7999 config setupLars-Peter Clausen
The ad7991/ad7995/ad7999 does not have a configuration register like the other devices that can be written and read. The configuration is written as part of the conversion sequence. Fixes: 0f7ddcc1bff1 ("iio:adc:ad799x: Write default config on probe and reset alert status on probe") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-13iio:adc:ad799x: Allow writing of event configPeter Meerwald
Allows explicity enabling of events Previously, events were always reported as enabled, but actually only implicitly enabled when updating the buffer scan mode Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-13iio:adc:ad799x: Return more meaningful event enabled statePeter Meerwald
only report an event as enabled if it actually is enabled Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-13iio:adc:ad799x: Set conversion channels and rename ad7997_8_update_scan_mode()Peter Meerwald
rename since function is used by all chips with ALERT pin, not just ad7997/8 Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-13iio:adc:ad799x: Write default config on probe and reset alert status on probePeter Meerwald
writing ALERT_EN and BUSY_ALERT to the chip config register clears pending alerts, BUSY_ALERT is cleared when reading back the register Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-13iio:adc:ad799x: Add helper function to read/write config registerPeter Meerwald
16-bit on ad7997/ad7998, 8-bit elsewhere Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-13iio:adc:ad799x: Make chan_spec const in ad799x_chip_config structPeter Meerwald
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-13iio:adc:ad799x: Only expose event interface when IRQ is availablePeter Meerwald
an IRQ is necessary to handle the ALERT condition; without IRQ, the IIO event interface serves no purpose Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-13iio:adc:ad799x: Use BIT() and GENMASK()Peter Meerwald
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-13iio:adc:ad799x: Save some lines in ad7997_8_update_scan_mode() exit handlingPeter Meerwald
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-13iio:adc:ad799x: Drop I2C access helper functionsPeter Meerwald
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-07Merge 3.16-rc4 into staging-nextGreg Kroah-Hartman
We want the staging tree fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-21iio:adc:ad799x: Fix reading and writing of event values, apply shiftPeter Meerwald
last two bits of ADC and limit values are zero and should not be reported (ad7993, ad7997); compare with read_raw() event values are 10 (ad7993, ad7997) or 12 bit max., check the range on write Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Stable@vger.kernel.org Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-06-14iio:adc:ad799x: Fix ad799x_chip_info kerneldocPeter Meerwald
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-05-03staging: iio: ad799x: remove some unneeded IS_ERR() checksDan Carpenter
My static checker is upset that we check IS_ERR(t->reg) when we know it is not an ERR_PTR. Checking for IS_ERR() twice is often a sign of confusion and buggy code. In this case, if the call to "ret = regulator_enable(st->vref);" fails, then we call "regulator_disable(st->vref);" and that's a mistake because "st->vref" is not enabled. I fixed these problems and Hartmut Knaack pointed out a couple unneeded IS_ERR() checks in ad799x_remove() so I have removed those as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-04-23staging: iio: Fix typo in iioMasanari Iida
Correct spelling typo in comment within staging/iio Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-03-16staging:iio: Move ad799x driver out of stagingLars-Peter Clausen
The driver is now at a reasonable quality level. Move it out of staging. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 21:56:59 +0000