summaryrefslogtreecommitdiff
path: root/drivers/ide
AgeCommit message (Collapse)Author
2008-04-21cdrom: make unregister_cdrom() return voidAkinobu Mita
Now unregister_cdrom() always returns 0. Make it return void and update all callers that check the return value. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-18ide: remove ide_init_default_irq() macroBartlomiej Zolnierkiewicz
* Use ide_default_irq() instead of ide_init_default_irq() in ide_generic host driver (so the correct IRQ is always set regardless of CONFIG_PCI / CONFIG_BLK_DEV_IDEPCI). * Remove no longer needed ide_init_default_irq() macro. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: move default IDE ports setup to ide_generic host driverBartlomiej Zolnierkiewicz
* Make CONFIG_IDE_GENERIC depended on CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS. * Move default IDE ports setup from init_ide_data() to ide_generic. * Use ide_init_port_hw() in ide_generic. * Remove no longer needed CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove obsoleted "idex=noprobe" kernel parameter (take 2)Bartlomiej Zolnierkiewicz
* Remove obsoleted "idex=noprobe" kernel parameter. * Remove no longer needed hwif->noprobe quirk from ide_hwif_configure() and hwif->noprobe checking from cmd640.c. v2: * "ide?=noprobe" -> "ide?=ata66" in Documentation/kernel-parameters.txt. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove needless hwif->irq check from ide_hwif_configure()Bartlomiej Zolnierkiewicz
ide_init_default_irq() is always zero for CONFIG_PCI=y so hwif->irq check in ide_hwif_configure() can be safely removed. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: init hwif->{io_ports,irq} explicitly in legacy VLB host driversBartlomiej Zolnierkiewicz
Do explicit port setup in legacy VLB host drivers instead of depending on init_ide_data(). This way hwif->io_ports[] and hwif->irq are always correctly set regardless of CONFIG_PCI / CONFIG_BLK_DEV_IDEPCI. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: limit legacy VLB host drivers to alpha, x86 and mipsBartlomiej Zolnierkiewicz
These host drivers indirectly depend on CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS=y which is defined only on alpha, x86, ia64, m32r, mips and ppc32. Moreover: - on ia64 there is no ISA - m32r is too new for VLB - on ppc32 ISA is available only on PPC_CHRP (no default IDE ports) and PPC_PREP (marked as BROKEN) [ the common sense tells me that VLB was only used on x86 but there are urban legends that one of these host drivers was needed on some other arch - thus the extra care ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18cmd640: init hwif->{io_ports,irq} explicitlyBartlomiej Zolnierkiewicz
Do explicit port setup instead of depending on init_ide_data(). This way hwif->io_ports[] and hwif->irq are always correctly set regardless of CONFIG_PCI / CONFIG_BLK_DEV_IDEPCI. While at it fix printk(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18cmd640: cleanup setup_device_ptrs()Bartlomiej Zolnierkiewicz
This loop is no longer needed. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: add ide-4drives host driver (take 3)Bartlomiej Zolnierkiewicz
CONFIG_BLK_DEV_4DRIVES deserves its own host driver: * Add drivers/ide/legacy/ide-4drives.c and move "4drives" support there. * Add ide-4drives.o in the link order after all other legacy host drivers enabled by "ide0=" options (they all are mutually exclusive). * Make ide-4drives host driver probe itself for IDE devices instead of indirectly depending on ide_generic host driver. * Add "probe" module parameter to ide-4drives and update documentation. v2: * s/paramater/parameter/ in ide.txt. (Noticed by Randy Dunlap) v3: * s/ide_4drives.probe/ide-4drives.probe/ in help entry. (Noticed by Sergei Shtylyov) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove ppc ifdef from init_ide_data()Bartlomiej Zolnierkiewicz
On PPC32 ide_init_default_irq() is non-zero only for PPLUS and PPC_PREP (the latter marked as BROKEN currently) so this ifdef can be removed. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove ide_default_io_ctl() macroBartlomiej Zolnierkiewicz
It is always == '((base) + 0x206)' if CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS=y and it is not needed otherwise (arm, blackfin, parisc, ppc64, sh, sparc[64]). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove CONFIG_IDE_ARCH_OBSOLETE_INITBartlomiej Zolnierkiewicz
* Use CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS instead of CONFIG_IDE_ARCH_OBSOLETE_INIT in init_ide_data(). * Remove no longer needed CONFIG_IDE_ARCH_OBSOLETE_INIT. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: add CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS (take 2)Bartlomiej Zolnierkiewicz
* Add CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS to drivers/ide/Kconfig and use it instead of defining IDE_ARCH_OBSOLETE_DEFAULTS in <arch/ide.h>. v2: * Define ide_default_irq() in ide-probe.c/ns87415.c if not already defined and drop defining ide_default_irq() for CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS=n. [ Thanks to Stephen Rothwell and David Miller for noticing the problem. ] Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: David Miller <davem@davemloft.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ppc: remove ppc_ide_mdBartlomiej Zolnierkiewicz
* Add special cases for pplus and prep to ide_default_{irq,io_base}() (+ FIXMEs about the need to use IDE platform host driver instead). * Remove no longer needed ppc_ide_md and struct ide_machdep_calls. * Then remove <linux/ide.h> include from: - arch/powerpc/kernel/setup_32.c - arch/ppc/kernel/ppc_ksyms.c - arch/ppc/kernel/setup.c - arch/ppc/platforms/pplus.c - arch/ppc/platforms/prep_setup.c There should be no functional changes caused by this patch. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ppc/pplus: remove ppc_ide_md.ide_init_hwif hookBartlomiej Zolnierkiewicz
* Call ide_init_default_irq() for pplus in init_ide_data(). * Remove no longer needed pplus_ide_init_hwif_ports(). There should be no functional changes caused by this patch. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ppc/sandpoint: remove ppc_ide_md hooksBartlomiej Zolnierkiewicz
* Add IDE_HFLAG_FORCE_LEGACY_IRQS host flag for Motorola-Sandpoint platform to sl82c105 host driver. * Disable ide_generic host driver in arch/ppc/configs/sandpoint_defconfig and enable sl82c105 one. * Remove ppc_ide_md hooks from arch/ppc/platforms/sandpoint.c - no need for them (sl82c105 host driver takes care of all this setup). * Then remove no longer needed <linux/ide.h> include. * Also update arch/ppc/platforms/sandpoint.h. Unfortunately (unlike lopec's case) sl82c105 host driver was not enabled in defconfing so there is a funcionality change. [ Not a big deal since sl82c105 is superior over ide_generic. ] Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ppc/lopec: remove ppc_ide_md hooksBartlomiej Zolnierkiewicz
* Add IDE_HFLAG_FORCE_LEGACY_IRQS host flag for Motorola-LoPEC platform to sl82c105 host driver. * Remove ppc_ide_md hooks from arch/ppc/platforms/lopec.c - no need for them (sl82c105 host driver takes care of all this setup). * Then remove no longer needed <linux/ide.h> include. Looking at arch/ppc/configs/lopec_defconfig: ... CONFIG_IDE_GENERIC=y CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_SL82C105=y ... there should be no functional changes unless somebody preferred to disable sl82c105 host driver and use only ide_generic one (but why would anybody want to do such thing :-). PS It seems that lopec_defconfig hasn't been updated for ages but if somebody is going to do it please look into disabling IDE_GENERIC and BLK_DEV_GENERIC config options. Thanks. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ppc/mpc8xx: remove ppc_ide_md hooksBartlomiej Zolnierkiewicz
* Initialize IDE ports in mpc8xx_ide_probe(). * Remove m8xx_ide_init() and ppc_ide_md hooks - no need for them (IDE mpc8xx host driver takes care of all this setup). * Remove needless 'if (irq)' and 'if (data_port >= MAX_HWIFS)' checks from m8xx_ide_init_hwif_ports(). * Remove 'ctrl_port' and 'irq' arguments from m8xx_ide_init_hwif_ports(). * Rename m8xx_ide_init_hwif_ports() to m8xx_ide_init_ports(). * Add __init tag to m8xx_ide_init_ports(). This patch fixes hwif->irq always being overriden to 0 (== auto-probe, is this even working on PPC?) because of ide_init_default_irq() call in ide.c. There should be no other functional changes. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ppc/pmac: remove ppc_ide_md hooksBartlomiej Zolnierkiewicz
* Add pmac_ide_init_ports() helper and use it instead of pmac_ide_init_hwif_ports(). * Remove ppc_ide_md hooks - no need for them (IDE pmac host driver takes care of all this setup). * Then remove no longer needed <linux/ide.h> include from arch/powerpc/platforms/powermac/pmac.h. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide-pmac: remove dead codeBartlomiej Zolnierkiewicz
Remove unused pmac_ide_{check_base,get_irq}() and pmac_find_ide_boot(), then remove no longer needed ide_majors[] and pmac_ide_count. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: use generic ATAPI packet command flags in ide-{floppy,tape}Borislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide-floppy: rename end_request handler properlyBorislav Petkov
mv idefloppy_do_end_request -> idefloppy_end_request as is the case with ide-cd Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide-floppy: convert driver to using generic ide_atapi_pcBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide-tape: convert driver to using generic ide_atapi_pcBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide-tape: remove atomic test/set macros for packet commandsBorislav Petkov
Removing the atomic tests for pc's is unobjectionable. Since this driver will probably go to /dev/null soon, the atomic tests for tape->flags are left in place for there are some situations where they're needed (chrdev DSC handling, low level pipeline operation and so on). While at it, rename all test/set flag bit defines explicitly to *_FLAG_* for clarity. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide-tape: move all struct and other defs at the topBorislav Petkov
Bart: - no need to move defines for tape flags around (they are completely rewritten by the next patch) Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove IDE_*_REG macrosBartlomiej Zolnierkiewicz
* Add IDE_{ALTSTATUS,IREASON,BCOUNTL,BCOUNTH}_OFFSET defines. * Remove IDE_*_REG macros - this results in more readable and slightly smaller code. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: add ide_atapi_{discard_data,write_zeros} inline helpersBartlomiej Zolnierkiewicz
Add ide_atapi_{discard_data,write_zeros} inline helpers to <linux/ide.h> and use them instead of home-brewn helpers in ide-{floppy,tape,scsi}. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide-floppy: remove struct idefloppy_id_gcwBorislav Petkov
Bart: - minor fixups Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18scc_pata.c: do setup itself instead of ide_setup_pci_device()Akira Iguchi
scc_pata has the different BAR configuration and using ide_setup_pci_device() is inappropriate. (ide_setup_pci_device() expects a normal PCI IDE controller with BAR0..BAR3 either non-existant or being primary/secondary port bases in I/O space.) This patch do all needed setup itself instead of calling ide_setup_pci_device(). [bart: minor checkpatch.pl fixes] Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove ide_init_hwif_ports()Bartlomiej Zolnierkiewicz
ide_init_hwif_ports() is only used by init_ide_data() now, inline it there. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove init_hwif_default()Bartlomiej Zolnierkiewicz
init_hwif_default() is only used by init_ide_data() now, inline it there. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove ->hold field from ide_hwif_t (take 2)Bartlomiej Zolnierkiewicz
->hold is write-only now, remove it. v2: * v1 missed bast-ide, palm_bk3710, ide-cs and delkin_cb host drivers. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove broken/dangerous HDIO_[UNREGISTER,SCAN]_HWIF ioctls (take 3)Bartlomiej Zolnierkiewicz
hdparm explicitely marks HDIO_[UNREGISTER,SCAN]_HWIF ioctls as DANGEROUS and given the number of bugs we can assume that there are no real users: * DMA has no chance of working because DMA resources are released by ide_unregister() and they are never allocated again. * Since ide_init_hwif_ports() is used for ->io_ports[] setup the ioctls don't work for almost all hosts with "non-standard" (== non ISA-like) layout of IDE taskfile registers (there is a lot of such host drivers). * ide_port_init_devices() is not called when probing IDE devices so: - drive->autotune is never set and IDE host/devices are not programmed for the correct PIO/DMA transfer modes (=> possible data corruption) - host specific I/O 32-bit and IRQ unmasking settings are not applied (=> possible data corruption) - host specific ->port_init_devs method is not called (=> no luck with ht6560b, qd65xx and opti621 host drivers) * ->rw_disk method is not preserved (=> no HPT3xxN chipsets support). * ->serialized flag is not preserved (=> possible data corruption when using icside, aec62xx (ATP850UF chipset), cmd640, cs5530, hpt366 (HPT3xxN chipsets), rz1000, sc1200, dtc2278 and ht6560b host drivers). * ->ack_intr method is not preserved (=> needed by ide-cris, buddha, gayle and macide host drivers). * ->sata_scr[] and sata_misc[] is cleared by ide_unregister() and it isn't initialized again (SiI3112 support needs them). * To issue an ioctl() there need to be at least one IDE device present in the system. * ->cable_detect method is not preserved + it is not called when probing IDE devices so cable detection is broken (however since DMA support is also broken it doesn't really matter ;-). * Some objects which may have already been freed in ide_unregister() are restored by ide_hwif_restore() (i.e. ->hwgroup). * ide_register_hw() may unregister unrelated IDE ports if free ide_hwifs[] slot cannot be found. * When IDE host drivers are modular unregistered port may be re-used by different host driver that owned it first causing subtle bugs. Since we now have a proper warm-plug support remove these ioctls, then remove no longer needed: - ide_register_hw() and ide_hwif_restore() functions - 'init_default' and 'restore' arguments of ide_unregister() - zeroeing of hwif->{dma,extra}_* fields in ide_unregister() As an added bonus IDE core code size shrinks by ~3kB (x86-32). v2: * fix ide_unregister() arguments in cleanup_module() (Andrew Morton). v3: * fix ide_unregister() arguments in palm_bk3710.c. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove obsoleted "idex=base[,ctl[,irq]]" kernel parameters (take 2)Bartlomiej Zolnierkiewicz
* Remove obsoleted "idex=base[,ctl[,irq]]" kernel parameters and update Documentation/ide/ide.txt. * Remove no longer needed ide_forced chipset type. v2: * is_chipset_set[] -> is_chipset_set in ide.c. * Documentation/ide/ide.txt fix. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove CONFIG_BLK_DEV_HD_IDE config option (take 2)Bartlomiej Zolnierkiewicz
* Remove CONFIG_BLK_DEV_HD hack from init_hwif_default() ("hda=noprobe hdb=noprobe" kernel parameters should be used instead if somebody wishes to use the old "hd" driver). * Make CONFIG_BLK_DEV_HD_ONLY config option available also when IDE subsystem is used and update help entry. * Remove no longer needed CONFIG_BLK_DEV_HD_IDE config option. v2: * Update documentation to suggest "hda=noprobe hdb=noprobe" instead of obsoleted "ide0=noprobe". * Update Documentation/ide/ide.txt. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove needless CONFIG_BLK_DEV_HD hack from init_hwif()Bartlomiej Zolnierkiewicz
request_irq() will fail if there is already another IRQ handler registered and IRQ flags are mismatched. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide-generic: add ide_generic class and attribute for adding new interfacesBartlomiej Zolnierkiewicz
* Add ide_generic_sysfs_init() helper registering 'ide_generic' class (together with ide_generic_class_release() ->class_release method) and use it in ide_generic_init(). * Add "add" class attribute to 'ide_generic' class for adding new interfaces (it is intended to be a replacement for obsoleted "idex=base[,ctl[,irq]]" kernel parameters). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: add warm-plug support for IDE devices (take 2)Bartlomiej Zolnierkiewicz
* Add 'struct class ide_port_class' ('ide_port' class) and a 'struct device *portdev' ('ide_port' class device) in ide_hwif_t. * Register 'ide_port' class in ide_init() and unregister it in cleanup_module(). * Create ->portdev in ide_register_port () and unregister it in ide_unregister(). * Add "delete_devices" class device attribute for unregistering IDE devices on a port and "scan" one for probing+registering IDE devices on a port. * Add ide_sysfs_register_port() helper for registering "delete_devices" and "scan" attributes with ->portdev. Call it in ide_device_add_all(). * Document IDE warm-plug support in Documentation/ide/warm-plug-howto.txt. v2: * Convert patch from using 'struct class_device' to use 'struct device'. (thanks to Kay Sievers for doing it) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove dead/obsolete ->busproc methodBartlomiej Zolnierkiewicz
->busproc method is used by HDIO_SET_BUSSTATE ioctl but it has no chance of working as intended (in 2.4.x days) because to issue an ioctl there is a device node needed and: - for BUSSTATE_TRISTATE+OFF it is too late (devices are already gone) - for BUSSTATE_TRISTATE+ON it is too early (devices are not registered yet) Just remove ->busproc method for now (it was only implemented by hpt366, siimage and tc86c001 host drivers). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: rework PowerMac media-bay support (take 2)Bartlomiej Zolnierkiewicz
Rework PowerMac media-bay support in such way that instead of un/registering the IDE interface we un/register IDE devices: * Add ide_port_scan() helper for probing+registerering devices on a port. * Rename ide_port_unregister_devices() to __ide_port_unregister_devices(). * Add ide_port_unregister_devices() helper for unregistering devices on a port. * Add 'ide_hwif_t *cd_port' to 'struct media_bay_info', pass 'hwif' instead of hwif->index to media_bay_set_ide_infos() and use it to setup 'cd_port'. * Use ide_port_unregister_devices() instead of ide_unregister() and ide_port_scan() instead of ide_register_hw() in media_bay_step(). * Unexport ide_register_hw() and make it static. v2: * Fix build by adding <linux/ide.h> include to <asm-powerpc/mediabay.h>. (Reported by Michael/Kamalesh/Andrew). Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: move ide_port_setup_devices() call to ide_device_add_all()Bartlomiej Zolnierkiewicz
Add ide_cfg_mtx lock/unlock to ide_port_setup_devices() and then move ide_port_setup_devices() call from init_irq() to ide_device_add_all(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: factor out devices init from ide_init_port_data()Bartlomiej Zolnierkiewicz
* Factor out devices init from ide_init_port_data() to ide_port_init_devices_data(). While at it: * Add explicit clearing of IDE device structure. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: factor out code unregistering devices from ide_unregister()Bartlomiej Zolnierkiewicz
Factor out code unregistering devices from ide_unregister() to ide_port_unregister_devices(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove IDE devices from /proc/ide/ before unregistering themBartlomiej Zolnierkiewicz
IDE devices need to be removed from /proc/ide/ _before_ being unregistered: * Drop 'ide_hwif_t *hwif' argument from destroy_proc_ide_device() and use drive->hwif instead. * Rename destroy_proc_ide_device() to ide_proc_unregister_device(). * Call ide_proc_unregister_device() in drive_release_dev(). * Remove no longer needed destroy_proc_ide_drives(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: factor out cable detection from ide_init_port()Bartlomiej Zolnierkiewicz
* Factor out cable detection from ide_init_port() to ide_port_cable_detect(). * Move ide_port_cable_detect() call to ide_device_add_all(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide-acpi: add missing drive->acpidata zeroingBartlomiej Zolnierkiewicz
There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: use ide_find_port() instead of ide_deprecated_find_port()Bartlomiej Zolnierkiewicz
* Use ide_find_port() instead of ide_deprecated_find_port() in bast-ide/ palm_bk3710/ide-cs/delkin_cb host drivers and in ide_register_hw(). * Remove no longer needed ide_deprecated_find_port(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: fix ide_find_port()Bartlomiej Zolnierkiewicz
* Instead of checking for '->io_ports[IDE_DATA_OFFSET] == 0' check for '->chipset == ide_unknown' when looking for an empty ide_hwifs[] slot. * Do ide-pnp initialization after ide-generic when IDE is built-in (ide-pnp is the only user of ide_find_port() which needs such fixup). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 04:48:54 +0000