summaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)Author
2020-06-10Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time around we have four lines of diff in the core framework, removing a function that isn't used anymore. Otherwise the main new thing for the common clk framework is that it is selectable in the Kconfig language now. Hopefully this will let clk drivers and clk consumers be testable on more than the architectures that support the clk framework. The goal is to introduce some Kunit tests for the framework. Outside of the core framework we have the usual set of various driver updates and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the largest addition this time around in terms of lines of code. After that the x86 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or upcoming SoCs. After that the dirstat shows the usual suspects working on their SoC support by fixing minor bugs, correcting data and converting some of their DT bindings to YAML. Core: - Allow the COMMON_CLK config to be selectable New Drivers: - Clk driver for Baikal-T1 SoCs - Mediatek MT6765 clock support - Support for Intel Agilex clks - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for the new Renesas RZ/G1H (R8A7742) SoC - Add support for Qualcomm's MSM8939 Generic Clock Controller Updates: - Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - A single minor rounding fix for the legacy Allwinner clock support - A few patches from Abel Vesa as preparation of adding audiomix clock support on i.MX - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3 drivers - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on aarch64 hardware - A series from Peng Fan to improve i.MX8M clock drivers, using composite clock for core and bus clk slice - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined bit rates - A couple changes for EMC frequency scaling on Tegra210 - Support for CPU frequency scaling on Tegra20/Tegra30 - New clk gate for CSI test pattern generator on Tegra210 - Regression fixes for Samsung exynos542x and exynos5433 SoCs - Use of fallthrough; attribute for Samsung s3c24xx - Updates and fixup HDMI and video clocks on Meson8b - Fixup reset polarity on Meson8b - Fix GPU glitch free mux switch on Meson gx and g12 - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2 - Two more conversions of Renesas DT bindings to json-schema - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits) clk: mediatek: Remove ifr{0,1}_cfg_regs structures clk: baikal-t1: remove redundant assignment to variable 'divider' clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible" dt-bindings: clock: Add a missing include to MMP Audio Clock binding dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first clk: clk-si5341: Add support for the Si5345 series ...
2020-06-05Merge tag 'gpio-v5.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.8 kernel cycle. Core changes: - A new GPIO aggregator driver has been merged: this can join a few select GPIO lines into a new aggregated GPIO chip. This can be used for security: a process can be granted access to only these lines, for example for industrial control. Another way to use this is to reexpose certain select lines to a virtual machine or container. - Warn if the gpio-line-names is too long in he DT parser core. - GPIO lines can now be looked up by line name in addition to being looked up by offset. New drivers: - A new generic regmap GPIO driver has been merged. Too many regmap drivers are starting to look like each other so we need to create some common ground and try to move drivers over to using that. - The F7188X driver now supports F81865. Driver improvements: - Large improvements to the PCA953x expander, get multiple lines and several cleanups. - Large improvements to the DesignWare DWAPB driver, and Sergey Semin has volunteered to maintain it. - PL061 can now be built as a module, this is part of a bigger effort to make the ARM platforms more modular" * tag 'gpio-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits) gpio: pca953x: Drop unneeded ACPI_PTR() MAINTAINERS: Add gpio regmap section gpio: add a reusable generic gpio_chip using regmap gpiolib: Introduce gpiochip_irqchip_add_domain() gpio: gpiolib: Allow GPIO IRQs to lazy disable gpiolib: Separate GPIO_GET_LINEINFO_WATCH_IOCTL conditional gpio: rcar: Fix runtime PM imbalance on error gpio: pca935x: Allow IRQ support for driver built as a module gpio: pxa: Add COMPILE_TEST support dt-bindings: gpio: Add renesas,em-gio bindings MAINTAINERS: Fix file name for DesignWare GPIO DT schema gpio: dwapb: Remove unneeded has_irq member in struct dwapb_port_property gpio: dwapb: Don't use IRQ 0 as valid Linux interrupt gpio: dwapb: avoid error message for optional IRQ gpio: dwapb: Call acpi_gpiochip_free_interrupts() on GPIO chip de-registration gpio: max730x: bring gpiochip_add_data after port config MAINTAINERS: Add GPIO Aggregator section docs: gpio: Add GPIO Aggregator documentation gpio: Add GPIO Aggregator gpiolib: Add support for GPIO lookup by line name ...
2020-06-01Merge branches 'pm-core' and 'pm-sleep'Rafael J. Wysocki
* pm-core: PM: runtime: Replace pm_runtime_callbacks_present() PM: runtime: clk: Fix clk_pm_runtime_get() error path PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend() * pm-sleep: PM: hibernate: Restrict writes to the resume device PM: hibernate: Split off snapshot dev option PM: hibernate: Incorporate concurrency handling PM: sleep: Helpful edits for devices.rst documentation Documentation: PM: sleep: Update driver flags documentation PM: sleep: core: Rename DPM_FLAG_LEAVE_SUSPENDED PM: sleep: core: Rename DPM_FLAG_NEVER_SKIP PM: sleep: core: Rename dev_pm_smart_suspend_and_suspended() PM: sleep: core: Rename dev_pm_may_skip_resume() PM: sleep: core: Rework the power.may_skip_resume handling PM: sleep: core: Do not skip callbacks in the resume phase PM: sleep: core: Fold functions into their callers PM: sleep: core: Simplify the SMART_SUSPEND flag handling
2020-05-27Merge tag 'v5.7-rc7' into develLinus Walleij
Linux 5.7-rc7
2020-05-19ARM/SAMSUNG EXYNOS ARM ARCHITECTURES: Use fallthrough;Joe Perches
Convert the various uses of fallthrough comments to fallthrough; Done via script Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/ Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C part Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2020-05-18i2c: i801: Use GPIO_LOOKUP() helper macroGeert Uytterhoeven
i801_add_mux() fills in the GPIO lookup table by manually populating an array of gpiod_lookup structures. Use the existing GPIO_LOOKUP() helper macro instead, to relax a dependency on the gpiod_lookup structure's member names. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Link: https://lore.kernel.org/r/20200511145257.22970-2-geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-15i2c: mux: demux-pinctrl: Fix an error handling path in ↵Christophe JAILLET
'i2c_demux_pinctrl_probe()' A call to 'i2c_demux_deactivate_master()' is missing in the error handling path, as already done in the remove function. Fixes: 50a5ba876908 ("i2c: mux: demux-pinctrl: add driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-15i2c: altera: Fix race between xfer_msg and isr threadAtsushi Nemoto
Use a mutex to protect access to idev->msg_len, idev->buf, etc. which are modified by both altr_i2c_xfer_msg() and altr_i2c_isr(). This is the minimal fix for easy backporting. A cleanup to remove the spinlock will be added later. Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Acked-by: Thor Thayer <thor.thayer@linux.intel.com> [wsa: updated commit message] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-15i2c: algo-pca: update contact emailWolfram Sang
The 'pengutronix' address is defunct for years. Use the proper contact address. Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-15i2c: at91: Fix pinmux after devm_gpiod_get() for bus recoveryCodrin Ciubotariu
devm_gpiod_get() usually calls gpio_request_enable() for non-strict pinmux drivers. These puts the pins in GPIO mode, whithout notifying the pinctrl driver. At this point, the I2C bus no longer owns the pins. To mux the pins back to the I2C bus, we use the pinctrl driver to change the state of the pins to GPIO, before using devm_gpiod_get(). After the pins are received as GPIOs, we switch theer pinctrl state back to the default one, Fixes: d3d3fdcc4c90 ("i2c: at91: implement i2c bus recovery") Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-05i2c: use my kernel.org address from now onWolfram Sang
The old email is still active, but for easier handling, I am going to use my kernel.org address from now on. Also, add a mailmap for the now defunct Pengutronix address. Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-05i2c: fix missing pm_runtime_put_sync in i2c_device_probeAlain Volmat
In case of the I2C client exposes the flag I2C_CLIENT_HOST_NOTIFY, pm_runtime_get_sync is called in order to always keep active the adapter. However later on, pm_runtime_put_sync is never called within the function in case of an error. This commit add this error handling. Fixes: 72bfcee11cf8 ("i2c: Prevent runtime suspend of adapter when Host Notify is required") Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-04-30i2c: aspeed: Avoid i2c interrupt status clear race condition.ryan_chen
In AST2600 there have a slow peripheral bus between CPU and i2c controller. Therefore GIC i2c interrupt status clear have delay timing, when CPU issue write clear i2c controller interrupt status. To avoid this issue, the driver need have read after write clear at i2c ISR. Fixes: f327c686d3ba ("i2c: aspeed: added driver for Aspeed I2C") Signed-off-by: ryan_chen <ryan_chen@aspeedtech.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [wsa: added Fixes tag] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-30i2c: amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handlingDan Carpenter
The problem is that we dereference "privdata->pci_dev" when we print the error messages in amd_mp2_pci_init(): dev_err(ndev_dev(privdata), "Failed to enable MP2 PCI device\n"); ^^^^^^^^^^^^^^^^^ Fixes: 529766e0a011 ("i2c: Add drivers for the AMD PCIe MP2 I2C controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2020-04-28Revert "i2c: tegra: Better handle case where CPU0 is busy for a long time"Wolfram Sang
This reverts commit a900aeac253729411cf33c6cb598c152e9e4137f because regressions were showing up. Suggested-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/dmaengine/20200319201140.17451-1-digetx@gmail.com/ Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-28Revert "i2c: tegra: Synchronize DMA before termination"Wolfram Sang
This reverts commit 8814044fe0fa182abc9ff818d3da562de98bc9a7 because regressions were showing up. Suggested-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/dmaengine/20200319201140.17451-1-digetx@gmail.com/ Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-28i2c: iproc: generate stop event for slave writesRayagonda Kokatanur
When slave status is I2C_SLAVE_RX_END, generate I2C_SLAVE_STOP event to i2c_client. Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-24PM: sleep: core: Rename DPM_FLAG_LEAVE_SUSPENDEDRafael J. Wysocki
Rename DPM_FLAG_LEAVE_SUSPENDED to DPM_FLAG_MAY_SKIP_RESUME which matches its purpose more closely. No functional impact. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2020-04-15i2c: tegra: Synchronize DMA before terminationDmitry Osipenko
DMA transfer could be completed, but CPU (which handles DMA interrupt) may get too busy and can't handle the interrupt in a timely manner, despite of DMA IRQ being raised. In this case the DMA state needs to synchronized before terminating DMA transfer in order not to miss the DMA transfer completion. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: tegra: Better handle case where CPU0 is busy for a long timeDmitry Osipenko
Boot CPU0 always handle I2C interrupt and under some rare circumstances (like running KASAN + NFS root) it may stuck in uninterruptible state for a significant time. In this case we will get timeout if I2C transfer is running on a sibling CPU, despite of IRQ being raised. In order to handle this rare condition, the IRQ status needs to be checked after completion timeout. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: remove i2c_new_probed_device APIWolfram Sang
All in-tree users have been converted to the new i2c_new_scanned_device function, so remove this deprecated one. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: altera: use proper variable to hold errnoWolfram Sang
device_property_read_u32() returns errno or 0, so we should use the integer variable 'ret' and not the u32 'val' to hold the retval. Fixes: 0560ad576268 ("i2c: altera: Add Altera I2C Controller driver") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: designware: platdrv: Remove DPM_FLAG_SMART_SUSPEND flag on BYT and CHTHans de Goede
We already set DPM_FLAG_SMART_PREPARE, so we completely skip all callbacks (other then prepare) where possible, quoting from dw_i2c_plat_prepare(): /* * If the ACPI companion device object is present for this device, it * may be accessed during suspend and resume of other devices via I2C * operation regions, so tell the PM core and middle layers to avoid * skipping system suspend/resume callbacks for it in that case. */ return !has_acpi_companion(dev); Also setting the DPM_FLAG_SMART_SUSPEND will cause acpi_subsys_suspend() to leave the controller runtime-suspended even if dw_i2c_plat_prepare() returned 0. Leaving the controller runtime-suspended normally, when the I2C controller is suspended during the suspend_late phase, is not an issue because the pm_runtime_get_sync() done by i2c_dw_xfer() will (runtime-)resume it. But for dw I2C controllers on Bay- and Cherry-Trail devices acpi_lpss.c leaves the controller alive until the suspend_noirq phase, because it may be used by the _PS3 ACPI methods of PCI devices and PCI devices are left powered on until the suspend_noirq phase. Between the suspend_late and resume_early phases runtime-pm is disabled. So for any ACPI I2C OPRegion accesses done after the suspend_late phase, the pm_runtime_get_sync() done by i2c_dw_xfer() is a no-op and the controller is left runtime-suspended. i2c_dw_xfer() has a check to catch this condition (rather then waiting for the I2C transfer to timeout because the controller is suspended). acpi_subsys_suspend() leaving the controller runtime-suspended in combination with an ACPI I2C OPRegion access done after the suspend_late phase triggers this check, leading to the following error being logged on a Bay Trail based Lenovo Thinkpad 8 tablet: [ 93.275882] i2c_designware 80860F41:00: Transfer while suspended [ 93.275993] WARNING: CPU: 0 PID: 412 at drivers/i2c/busses/i2c-designware-master.c:429 i2c_dw_xfer+0x239/0x280 ... [ 93.276252] Workqueue: kacpi_notify acpi_os_execute_deferred [ 93.276267] RIP: 0010:i2c_dw_xfer+0x239/0x280 ... [ 93.276340] Call Trace: [ 93.276366] __i2c_transfer+0x121/0x520 [ 93.276379] i2c_transfer+0x4c/0x100 [ 93.276392] i2c_acpi_space_handler+0x219/0x510 [ 93.276408] ? up+0x40/0x60 [ 93.276419] ? i2c_acpi_notify+0x130/0x130 [ 93.276433] acpi_ev_address_space_dispatch+0x1e1/0x252 ... So since on BYT and CHT platforms we want ACPI I2c OPRegion accesses to work until the suspend_noirq phase, we need the controller to be runtime-resumed during the suspend phase if it is runtime-suspended suspended at that time. This means that we must not set the DPM_FLAG_SMART_SUSPEND on these platforms. On BYT and CHT we already have a special ACCESS_NO_IRQ_SUSPEND flag to make sure the controller stays functional until the suspend_noirq phase. This commit makes the driver not set the DPM_FLAG_SMART_SUSPEND flag when that flag is set. Cc: stable@vger.kernel.org Fixes: b30f2f65568f ("i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-02Merge branch 'i2c/for-5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has: - using defines for bus speeds to avoid mistakes in hardcoded values; lots of small driver updates because of that. Thanks, Andy! - API change: i2c_setup_smbus_alert() was renamed to i2c_new_smbus_alert_device() and returns ERRPTR now. All in-tree users have been converted - in the core, a rare race condition when deleting the cdev has been fixed. Thanks, Kevin! - lots of driver updates. Thanks, everyone! I also want to mention: The amount of review and testing tags given was quite high this time. Thank you to these people, too. I hope we can keep it like this!" * 'i2c/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits) i2c: rcar: clean up after refactoring i2c_timings macintosh: convert to i2c_new_scanned_device i2c: drivers: Use generic definitions for bus frequencies i2c: algo: Use generic definitions for bus frequencies i2c: stm32f7: switch to I²C generic property parsing i2c: rcar: Consolidate timings calls in rcar_i2c_clock_calculate() i2c: core: Allow override timing properties with 0 i2c: core: Provide generic definitions for bus frequencies i2c: mxs: Use dma_request_chan() instead dma_request_slave_channel() i2c: imx: remove duplicate print after platform_get_irq() i2c: designware: Fix spelling typos in the comments i2c: designware: Discard i2c_dw_read_comp_param() function i2c: designware: Detect the FIFO size in the common code i2c: dev: Fix the race between the release of i2c_dev and cdev i2c: qcom-geni: Drop of_platform.h include i2c: qcom-geni: Grow a dev pointer to simplify code i2c: qcom-geni: Let firmware specify irq trigger flags i2c: stm32f7: do not backup read-only PECR register i2c: smbus: remove outdated references to irq level triggers i2c: convert SMBus alert setup function to return an ERRPTR ...
2020-03-31i2c: rcar: clean up after refactoring i2c_timingsWolfram Sang
The pointer is not really needed anymore since we have the timings struct available in the function itself now. Remove the pointer and access the struct directly. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-28i2c: pca-platform: Use platform_irq_get_optionalChris Packham
The interrupt is not required so use platform_irq_get_optional() to avoid error messages like i2c-pca-platform 22080000.i2c: IRQ index 0 not found Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-28i2c: st: fix missing struct parameter descriptionAlain Volmat
Fix a missing struct parameter description to allow warning free W=1 compilation. Signed-off-by: Alain Volmat <avolmat@me.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-26Merge tag 'v5.6-rc7' into i2c/for-5.7Wolfram Sang
Linux 5.6-rc7
2020-03-24i2c: nvidia-gpu: Handle timeout correctly in gpu_i2c_check_status()Kai-Heng Feng
Nvidia card may come with a "phantom" UCSI device, and its driver gets stuck in probe routine, prevents any system PM operations like suspend. There's an unaccounted case that the target time can equal to jiffies in gpu_i2c_check_status(), let's solve that by using readl_poll_timeout() instead of jiffies comparison functions. Fixes: c71bcdcb42a7 ("i2c: add i2c bus driver for NVIDIA GPU") Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Ajay Gupta <ajayg@nvidia.com> Tested-by: Ajay Gupta <ajayg@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-24i2c: drivers: Use generic definitions for bus frequenciesAndy Shevchenko
Since we have generic definitions for bus frequencies, let's use them. Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Robert Richter <rrichter@marvell.com> Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com> Acked-by: Elie Morisse <syniurge@gmail.com> Acked-by: Nehal Shah <nehal-bakulchandra.shah@amd.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-24i2c: algo: Use generic definitions for bus frequenciesAndy Shevchenko
Since we have generic definitions for bus frequencies, let's use them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-24i2c: stm32f7: switch to I²C generic property parsingAndy Shevchenko
Switch to the new generic functions: i2c_parse_fw_timings(). While here, replace hard coded values with standard bus frequency definitions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-24i2c: rcar: Consolidate timings calls in rcar_i2c_clock_calculate()Andy Shevchenko
Move i2c_parse_fw_timings() to rcar_i2c_clock_calculate() to consolidate timings calls in one place. While here, replace hard coded values with standard bus frequency definitions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-24i2c: core: Allow override timing properties with 0Andy Shevchenko
Some drivers may allow to override properties with 0 value when defaults are not in use, thus, replace memset() with corresponding per property update. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-24i2c: core: Provide generic definitions for bus frequenciesAndy Shevchenko
There are few maximum bus frequencies being used in the I²C core code. Provide generic definitions for bus frequencies and use them in the core. The drivers may use predefined constants where it is appropriate. Some of them are already using these under slightly different names. We will convert them later to use newly introduced defines. Note, the name of modes are chosen to follow well established naming scheme [1]. These definitions will also help to avoid typos in the numbers that may lead to subtle errors. [1]: https://en.wikipedia.org/wiki/I%C2%B2C#Differences_between_modes Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-22i2c: mxs: Use dma_request_chan() instead dma_request_slave_channel()Peter Ujfalusi
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-22i2c: hix5hd2: add missed clk_disable_unprepare in removeChuhong Yuan
The driver forgets to disable and unprepare clk when remove. Add a call to clk_disable_unprepare to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2020-03-21i2c: imx: remove duplicate print after platform_get_irq()Tang Bin
We don't need dev_err() message because when something goes wrong, platform_get_irq() has print an error message itself, so we should remove duplicate dev_err(). Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-21i2c: designware: Fix spelling typos in the commentsAndy Shevchenko
Fix spelling typos in the comments with help of `codespell`. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-21i2c: designware: Discard i2c_dw_read_comp_param() functionSerge Semin
There is no code left in the kernel which would be using the function. So just remove it. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-21i2c: designware: Detect the FIFO size in the common codeSerge Semin
The problem with detecting the FIFO depth in the platform driver is that in order to implement this we have to access the controller IC_COMP_PARAM_1 register. Currently it's done before the i2c_dw_set_reg_access() method execution, which is errors prone since the method determines the registers endianness and access mode and we can't use dw_readl/dw_writel accessors before this information is retrieved. We also can't move the i2c_dw_set_reg_access() function invocation to after the master/slave probe functions call (when endianness and access mode are determined), since the FIFO depth information is used by them for initializations. So in order to fix the problem we have no choice but to move the FIFO size detection methods to the common code and call it at the probe stage. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-20i2c: dev: Fix the race between the release of i2c_dev and cdevKevin Hao
The struct cdev is embedded in the struct i2c_dev. In the current code, we would free the i2c_dev struct directly in put_i2c_dev(), but the cdev is manged by a kobject, and the release of it is not predictable. So it is very possible that the i2c_dev is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 19 PID: 1 at lib/debugobjects.c:325 debug_print_object+0xb0/0xf0 Modules linked in: CPU: 19 PID: 1 Comm: swapper/0 Tainted: G W 5.2.20-yocto-standard+ #120 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 80c00089 (Nzcv daIf +PAN +UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff00001292f7d0 x29: ffff00001292f7d0 x28: ffff800b82151788 x27: 0000000000000001 x26: ffff800b892c0000 x25: ffff0000124a2558 x24: 0000000000000000 x23: ffff00001107a1d8 x22: ffff0000116b5088 x21: ffff800bdc6afca8 x20: ffff000012471ae8 x19: ffff00001168f2c8 x18: 0000000000000010 x17: 00000000fd6f304b x16: 00000000ee79de43 x15: ffff800bc0e80568 x14: 79616c6564203a74 x13: 6e6968207473696c x12: 5f72656d6974203a x11: ffff0000113f0018 x10: 0000000000000000 x9 : 000000000000001f x8 : 0000000000000000 x7 : ffff0000101294cc x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 00000000ffffffff x2 : 0000000000000000 x1 : 387fc15c8ec0f200 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 __debug_check_no_obj_freed+0x19c/0x228 debug_check_no_obj_freed+0x1c/0x28 kfree+0x250/0x440 put_i2c_dev+0x68/0x78 i2cdev_detach_adapter+0x60/0xc8 i2cdev_notifier_call+0x3c/0x70 notifier_call_chain+0x8c/0xe8 blocking_notifier_call_chain+0x64/0x88 device_del+0x74/0x380 device_unregister+0x54/0x78 i2c_del_adapter+0x278/0x2d0 unittest_i2c_bus_remove+0x3c/0x80 platform_drv_remove+0x30/0x50 device_release_driver_internal+0xf4/0x1c0 driver_detach+0x58/0xa0 bus_remove_driver+0x84/0xd8 driver_unregister+0x34/0x60 platform_driver_unregister+0x20/0x30 of_unittest_overlay+0x8d4/0xbe0 of_unittest+0xae8/0xb3c do_one_initcall+0xac/0x450 do_initcall_level+0x208/0x224 kernel_init_freeable+0x2d8/0x36c kernel_init+0x18/0x108 ret_from_fork+0x10/0x1c irq event stamp: 3934661 hardirqs last enabled at (3934661): [<ffff00001009fa04>] debug_exception_exit+0x4c/0x58 hardirqs last disabled at (3934660): [<ffff00001009fb14>] debug_exception_enter+0xa4/0xe0 softirqs last enabled at (3934654): [<ffff000010081d94>] __do_softirq+0x46c/0x628 softirqs last disabled at (3934649): [<ffff0000100b4a1c>] irq_exit+0x104/0x118 This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the i2c_dev, and use the API provided by the commit 233ed09d7fda to make sure that the release of i2c_dev and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-13i2c: qcom-geni: Drop of_platform.h includeStephen Boyd
This driver doesn't call any DT platform functions like of_platform_*(). Remove the include as it isn't used. Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-13i2c: qcom-geni: Grow a dev pointer to simplify codeStephen Boyd
Some lines are long here. Use a struct dev pointer to shorten lines and simplify code. The clk_get() call can fail because of EPROBE_DEFER problems too, so just remove the error print message because it isn't useful. Finally, platform_get_irq() already prints an error so just remove that error message. Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-13i2c: qcom-geni: Let firmware specify irq trigger flagsStephen Boyd
We don't need to force IRQF_TRIGGER_HIGH here as the DT or ACPI tables should take care of this for us. Just use 0 instead so that we use the flags from the firmware. Also, remove specify dev_name() for the irq name so that we can get better information in /proc/interrupts about which device is generating interrupts. Cc: Alok Chauhan <alokc@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-13i2c: stm32f7: do not backup read-only PECR registerAlain Volmat
The PECR register provides received packet computed PEC value.  It makes no sense restoring its value after a reset, and anyway, as read-only register it cannot be restored. Fixes: ea6dd25deeb5 ("i2c: stm32f7: add PM_SLEEP suspend/resume support") Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-13i2c: acpi: put device when verifying client failsWolfram Sang
i2c_verify_client() can fail, so we need to put the device when that happens. Fixes: 525e6fabeae2 ("i2c / ACPI: add support for ACPI reconfigure notifications") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10i2c: gpio: suppress error on probe deferHamish Martin
If a GPIO we are trying to use is not available and we are deferring the probe, don't output an error message. This seems to have been the intent of commit 05c74778858d ("i2c: gpio: Add support for named gpios in DT") but the error was still output due to not checking the updated 'retdesc'. Fixes: 05c74778858d ("i2c: gpio: Add support for named gpios in DT") Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10i2c: smbus: remove outdated references to irq level triggersWolfram Sang
IRQ levels are now handled within the IRQ core. Remove the forgotten references from the documentation. Fixes: 9b9f2b8bc2ac ("i2c: i2c-smbus: Use threaded irq for smbalert") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10i2c: convert SMBus alert setup function to return an ERRPTRWolfram Sang
Only few drivers use this call, so drivers and I2C core are converted at once with this patch. By simply using i2c_new_client_device() instead of i2c_new_device(), we easily can return an ERRPTR for this function as well. To make out of tree users aware that something changed, the function is renamed to i2c_new_smbus_alert_device(). Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 00:15:53 +0000