summaryrefslogtreecommitdiff
path: root/drivers/i2c/muxes
AgeCommit message (Collapse)Author
2019-07-15Merge branch 'i2c/for-5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "New stuff from the I2C world: - in the core, getting irqs from ACPI is now similar to OF - new driver for MediaTek MT7621/7628/7688 SoCs - bcm2835, i801, and tegra drivers got some more attention - GPIO API cleanups - cleanups in the core headers - lots of usual driver updates" * 'i2c/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (74 commits) i2c: mt7621: Fix platform_no_drv_owner.cocci warnings i2c: cpm: remove casting dma_alloc dt-bindings: i2c: sun6i-p2wi: Fix the binding example dt-bindings: i2c: mv64xxx: Fix the example compatible i2c: i801: Documentation update i2c: i801: Add support for Intel Tiger Lake i2c: i801: Fix PCI ID sorting dt-bindings: i2c-stm32: document optional dmas i2c: i2c-stm32f7: Add I2C_SMBUS_I2C_BLOCK_DATA support i2c: core: Tidy up handling of init_irq i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq i2c: core: Move ACPI IRQ handling to probe time i2c: acpi: Factor out getting the IRQ from ACPI i2c: acpi: Use available IRQ helper functions i2c: core: Allow whole core to use i2c_dev_irq_from_resources eeprom: at24: modify a comment referring to platform data dt-bindings: i2c: omap: Add new compatible for J721E SoCs dt-bindings: i2c: mv64xxx: Add YAML schemas dt-bindings: i2c: sun6i-p2wi: Add YAML schemas i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver ...
2019-06-22i2c: mux/i801: Switch to use descriptor passingLinus Walleij
This switches the i801 GPIO mux to use GPIO descriptors for handling the GPIO lines. The previous hack which was reaching inside the GPIO chips etc cannot live on. We pass descriptors along with the GPIO mux device at creation instead. The GPIO mux was only used by way of platform data with a platform device from one place in the kernel: the i801 i2c bus driver. Let's just associate the GPIO descriptor table with the actual device like everyone else and dynamically create a descriptor table passed along with the GPIO i2c mux. This enables simplification of the GPIO i2c mux driver to use only the descriptor API and the OF probe path gets simplified in the process. The i801 driver was registering the GPIO i2c mux with PLATFORM_DEVID_AUTO which would make it hard to predict the device name and assign the descriptor table properly, but this seems to be a mistake to begin with: all of the GPIO mux devices are hardcoded to look up GPIO lines from the "gpio_ich" GPIO chip. If there are more than one mux, there is certainly more than one gpio chip as well, and then we have more serious problems. Switch to PLATFORM_DEVID_NONE instead. There can be only one. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Peter Rosin <peda@axentia.se> Cc: Jean Delvare <jdelvare@suse.com> Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> [Removed a newline, suggested by Andy. /Peter] Signed-off-by: Peter Rosin <peda@axentia.se>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-10i2c: mux: pinctrl: use flexible-array member and struct_size() helperGustavo A. R. Silva
Update the code to use a flexible array member instead of a pointer in structure i2c_mux_pinctrl and use the struct_size() helper. Also, make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used. So, replace the following form: sizeof(*mux) + num_names * sizeof(*mux->states) with: struct_size(mux, states, num_names) This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Peter Rosin <peda@axentia.se>
2019-06-10i2c: mux: arb-gpio: Rewrite to use GPIO descriptorsLinus Walleij
Instead of complex code picking GPIOs out of the device tree and keeping track of polarity for each GPIO line, use descriptors and pull polarity handling into the gpiolib. We look for "our-claim" and "their-claim" since the gpiolib code will try e.g. "our-claim-gpios" and "our-claim-gpio" in turn to locate these GPIO lines from the device tree. Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Doug Anderson <dianders@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Peter Rosin <peda@axentia.se>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 315 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177Thomas Gleixner
Based on 1 normalized pattern(s): licensed under the gpl 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170026.071193225@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into ↵Wolfram Sang
i2c/for-5.2 Mainly some pca954x work, i.e. removal of unused platform data support and added support for sysfs interface for manipulating/examining the idle state. And then a mechanical cocci-style patch.
2019-04-21i2c: mux: demux-pinctrl: use struct_size() in devm_kzalloc()Gustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Peter Rosin <peda@axentia.se>
2019-04-21i2c: mux: pca954x: allow management of device idle state via sysfsRobert Shearman
The behaviour, by default, to not deselect after each transfer is unsafe when there is a device with an address that conflicts with another device on another mux on the same parent bus, and it may not be convenient to use devicetree to set the deselect mux, e.g. when running on x86_64 when ACPI is used to discover most of the device hierarchy. Therefore, provide the ability to set the idle state behaviour using a new sysfs file, idle_state as a complement to the method of instantiating the device via sysfs. The possible behaviours are disconnect, i.e. to deselect all channels from the mux, as-is (the default), i.e. leave the last channel selected, and set a predetermined channel. The current behaviour of leaving the channel as-is after each transaction is preserved. Signed-off-by: Robert Shearman <robert.shearman@att.com> Signed-off-by: Peter Rosin <peda@axentia.se>
2019-04-21i2c: mux: pca9541: remove support for unused platform dataRobert Shearman
There are no in-tree users of the platform data, so remove it to simplify the code slightly. Remove the now unused pca954x.h platform data header. Signed-off-by: Robert Shearman <robert.shearman@att.com> Signed-off-by: Peter Rosin <peda@axentia.se>
2019-04-21i2c: mux: pca954x: remove support for unused platform dataRobert Shearman
There are no in-tree users of the pca954x platform data and the per-channel deselect configuration complicates efforts to export the configuration to user-space in a way that could be applied to other muxes. Therefore, remove support for the pca954x platform data. Signed-off-by: Robert Shearman <robert.shearman@att.com> Signed-off-by: Peter Rosin <peda@axentia.se>
2019-04-16i2c: demux: handle the new atomic callbacksWolfram Sang
If the parent has an atomic callback, we need to translate it the same way as the non-atomic callback. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-10-29Merge branch 'i2c/for-4.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has not so much stuff this time. Mostly driver enablement for new SoCs, some driver bugfixes, and some cleanups" * 'i2c/for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (35 commits) MAINTAINERS: add maintainer for Renesas RIIC driver i2c: sh_mobile: Remove dummy runtime PM callbacks i2c: uniphier-f: fix race condition when IRQ is cleared i2c: uniphier-f: fix occasional timeout error i2c: uniphier-f: make driver robust against concurrency i2c: i2c-qcom-geni: Simplify irq handler i2c: i2c-qcom-geni: Simplify tx/rx functions i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers i2c: mux: mlxcpld: simplify code to reach the adapter i2c: mux: ltc4306: simplify code to reach the adapter i2c: mux: pca954x: simplify code to reach the adapter i2c: core: remove level of indentation in i2c_transfer i2c: core: remove outdated DEBUG output i2c: zx2967: use core to detect 'no zero length' quirk i2c: tegra: use core to detect 'no zero length' quirk i2c: qup: use core to detect 'no zero length' quirk i2c: omap: use core to detect 'no zero length' quirk i2c: Convert to using %pOFn instead of device_node.name i2c: brcmstb: Allow enabling the driver on DSL SoCs eeprom: at24: fix unexpected timeout under high load ...
2018-10-29Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into ↵Wolfram Sang
i2c/for-4.20-fixed
2018-10-08i2c: mux: mlxcpld: simplify code to reach the adapterLuca Ceresoli
struct i2c_client has a direct pointer to the adapter, no need to dig it out of the struct device tree. Suggested-by: Peter Rosin <peda@axentia.se> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Peter Rosin <peda@axentia.se>
2018-10-08i2c: mux: ltc4306: simplify code to reach the adapterLuca Ceresoli
struct i2c_client has a direct pointer to the adapter, no need to dig it out of the struct device tree. Suggested-by: Peter Rosin <peda@axentia.se> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Peter Rosin <peda@axentia.se>
2018-10-08i2c: mux: pca954x: simplify code to reach the adapterLuca Ceresoli
struct i2c_client has a direct pointer to the adapter, no need to dig it out of the struct device tree. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Peter Rosin <peda@axentia.se>
2018-10-05i2c: Convert to using %pOFn instead of device_node.nameRob Herring
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Reviewed-by: Peter Rosin <peda@axentia.se> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-09-13gpiolib: Pass array info to get/set array functionsJanusz Krzysztofik
In order to make use of array info obtained from gpiod_get_array() and speed up processing of arrays matching single GPIO chip layout, that information must be passed to get/set array functions. Extend the functions' API with that additional parameter and update all users. Pass NULL if a user builds an array itself from single GPIOs. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-13gpiolib: Pass bitmaps, not integer arrays, to get/set arrayJanusz Krzysztofik
Most users of get/set array functions iterate consecutive bits of data, usually a single integer, while processing array of results obtained from, or building an array of values to be passed to those functions. Save time wasted on those iterations by changing the functions' API to accept bitmaps. All current users are updated as well. More benefits from the change are expected as soon as planned support for accepting/passing those bitmaps directly from/to respective GPIO chip callbacks if applicable is implemented. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-04Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into ↵Wolfram Sang
i2c/for-4.19 Simplify the probe function of the pca954x driver
2018-07-30i2c: mux: pca954x: use helper variable in probeLinus Walleij
This creates a struct device *dev helper variable in probe() which IMO makes the code less cluttered and easier to read. Also rename the of_node veriable to the common shortform "np" (node pointer). Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [peda: slightly edited commit message and removed some surplus newlines] Signed-off-by: Peter Rosin <peda@axentia.se>
2018-07-13Merge branch 'i2c/precise-locking-names_immutable' into i2c/for-4.19Wolfram Sang
2018-07-13i2c: mux: pca9541: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)Peter Rosin
Locking the root adapter for __i2c_transfer will deadlock if the device sits behind a mux-locked I2C mux. Switch to the finer-grained i2c_lock_bus with the I2C_LOCK_SEGMENT flag. If the device does not sit behind a mux-locked mux, the two locking variants are equivalent. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-07-03i2c: mux: pca954x: make use of __i2c_smbus_xferPeter Rosin
This simplifies the code, and you get retries for free if the adapter does not support ->master_xfer. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-07-03i2c: mux: pca9541: make use of __i2c_smbus_xferPeter Rosin
This simplifies the code, and you get retries for free if the adapter does not support ->master_xfer. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-07-03i2c: mux: mlxcpld: make use of __i2c_smbus_xferPeter Rosin
This simplifies the code, and you get retries for free if the adapter does not support ->master_xfer. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Michael Shych <michaelsh@mellanox.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-06-14Merge branch 'i2c/for-4.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - mainly feature additions to drivers (stm32f7, qup, xlp9xx, mlxcpld, ...) - conversion to use the i2c_8bit_addr_from_msg macro consistently - move includes to platform_data - core updates to allow the (still in review) I3C subsystem to connect - and the regular share of smaller driver updates * 'i2c/for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (68 commits) i2c: qup: fix building without CONFIG_ACPI i2c: tegra: Remove suspend-resume i2c: imx-lpi2c: Switch to SPDX identifier i2c: mxs: Switch to SPDX identifier i2c: busses: make use of i2c_8bit_addr_from_msg i2c: algos: make use of i2c_8bit_addr_from_msg i2c: rcar: document R8A77980 bindings i2c: qup: Add command-line parameter to override SCL frequency i2c: qup: Correct duty cycle for FM and FM+ i2c: qup: Add support for Fast Mode Plus i2c: qup: add probe path for Centriq ACPI devices i2c: robotfuzz-osif: drop pointless test i2c: robotfuzz-osif: remove pointless local variable i2c: rk3x: Don't print visible virtual mapping MMIO address i2c: opal: don't check number of messages in the driver i2c: ibm_iic: don't check number of messages in the driver i2c: imx: Switch to SPDX identifier i2c: mux: pca954x: merge calls to of_match_device and of_device_get_match_data i2c: mux: demux-pinctrl: use proper parent device for demux adapter i2c: mux: improve error message for failed symlink ...
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-30Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into ↵Wolfram Sang
i2c/for-4.18 This time around we have mostly trivial changes. However, there are also a couple of "real" patches improving a few aspects of the demux-pinctrl behavior and we also actually reset pca954x chips on probe when we have the ability to do so.
2018-05-24i2c: mux: pca954x: merge calls to of_match_device and of_device_get_match_dataJulia Lawall
Drop call to of_match_device, which is subsumed by the subsequent call to of_device_get_match_data. The code becomes simpler, and a temporary variable can be dropped. The semantic match that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ local idexpression match; identifier i; expression x, dev, e, e1; @@ - match@i = of_match_device(x, dev); - if (match) e = of_device_get_match_data(dev); - else e = e1; + e = of_device_get_match_data(dev); + if (!e) e = e1; @@ identifier r.i; @@ - const struct of_device_id *i; ... when != i // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Peter Rosin <peda@axentia.se>
2018-05-24i2c: mux: demux-pinctrl: use proper parent device for demux adapterWolfram Sang
Due to a typo, the wrong parent device was assigned to the newly created demuxing adapter device. It got connected to the demuxing platform device but not to the selected parent I2C adapter device. Fix it to get a proper parent-child relationship of the demuxed busses. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Peter Rosin <peda@axentia.se>
2018-05-24i2c: mux: reg: failed memory allocation is logged elsewhereMarkus Elfring
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Peter Rosin <peda@axentia.se>
2018-05-19i2c: mux: pca954x: force reset on probe if availableMike Looijmans
Instead of just hogging the reset GPIO into deactivated state, activate and then de-activate the reset. This allows for better recovery if the CPU was reset halfway through an I2C transaction for example. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Peter Rosin <peda@axentia.se>
2018-05-19i2c: mux: demux-pinctrl: disable PM user interfaceWolfram Sang
The demux device is only a logical device with no children. So, no RuntimePM is needed, let's disable the sysfs interface for it. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Peter Rosin <peda@axentia.se>
2018-05-19i2c: mux: ltc4306: switch to using .probe_newPeter Rosin
Use the new probe style for i2c drivers. Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Peter Rosin <peda@axentia.se>
2018-05-17i2c: mux: gpio: move header to platform_dataWolfram Sang
This header only contains platform_data. Move it to the proper directory. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>
2018-03-06i2c: mux: pca954x: verify the device id of the pca984x chipsPeter Rosin
Make sure to not disallow the chips on adapters that are not capable of reading the device id, but also make sure to check the device id before writing to the chip. Tested-by: Adrian Fiergolski <adrian.fiergolski@cern.ch> Signed-off-by: Peter Rosin <peda@axentia.se>
2017-12-30i2c: mux: reg: don't log an error for probe deferralTomasz Bachorski
It's possible that i2c_mux_reg_probe_dt() could return -EPROBE_DEFER. In that case, driver will request a probe deferral and an error suggesting device tree parsing problem will be reported. This is a pretty confusing information. Let's change the error handling, so driver will be able to request probe deferral without logging not related errors. Signed-off-by: Tomasz Bachorski <tomasz.bachorski@nokia.com> Signed-off-by: Peter Rosin <peda@axentia.se>
2017-12-30i2c: mux: pca954x: add support for NXP PCA984x familyAdrian Fiergolski
This patch extends the current i2c-mux-pca954x driver and adds support for a newer PCA984x family of the I2C switches and multiplexers from NXP. Signed-off-by: Adrian Fiergolski <adrian.fiergolski@cern.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Rosin <peda@axentia.se>
2017-11-14Merge branch 'i2c/for-4.15' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "This contains two bigger than usual tree-wide changes this time. They all have proper acks, caused no merge conflicts in linux-next where they have been for a while. They are namely: - to-gpiod conversion of the i2c-gpio driver and its users (touching arch/* and drivers/mfd/*) - adding a sbs-manager based on I2C core updates to SMBus alerts (touching drivers/power/*) Other notable changes: - i2c_boardinfo can now carry a dev_name to be used when the device is created. This is because some devices in ACPI world need fixed names to find the regulators. - the designware driver got a long discussed overhaul of its PM handling. img-scb and davinci got PM support, too. - at24 driver has way better OF support. And it has a new maintainer. Thanks Bartosz for stepping up! The rest is regular driver updates and fixes" * 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits) ARM: sa1100: simpad: Correct I2C GPIO offsets i2c: aspeed: Deassert reset in probe eeprom: at24: Add OF device ID table MAINTAINERS: new maintainer for AT24 driver i2c: nuc900: remove platform_data, too i2c: thunderx: Remove duplicate NULL check i2c: taos-evm: Remove duplicate NULL check i2c: Make i2c_unregister_device() NULL-aware i2c: xgene-slimpro: Support v2 i2c: mpc: remove useless variable initialization i2c: omap: Trigger bus recovery in lockup case i2c: gpio: Add support for named gpios in DT dt-bindings: i2c: i2c-gpio: Add support for named gpios i2c: gpio: Local vars in probe i2c: gpio: Augment all boardfiles to use open drain i2c: gpio: Enforce open drain through gpiolib gpio: Make it possible for consumers to enforce open drain i2c: gpio: Convert to use descriptors power: supply: sbs-message: fix some code style issues power: supply: sbs-battery: remove unchecked return var ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01Merge branch 'i2c/sbs-manager' into i2c/for-4.15Wolfram Sang
2017-10-28i2c: mux: pca954x: Return error if irq_create_mapping failsPhil Reid
irq_create_mapping can return an error, report error to log and return. Cleanup will occur in the probe function when an error is returned. Suggested-by: Peter Rosin <peda@axentia.se> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-10-28i2c: mux: pca954x: call request irq after adding mux segmentsPhil Reid
The pca954x device do not have the ability to mask interrupts. For i2c slave devices that also don't have masking ability (eg ltc1760 smbalert output) delay registering the irq until after the mux segments have been configured. During the mux add_adaptor call the core i2c system can register an smbalert handler which would then be called immediately when the irq is registered. This smbalert handler will then clear the pending irq. This removes the need for the irq_mask / irq_unmask calls that were original used to do this. Signed-off-by: Phil Reid <preid@electromag.com.au> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>