summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses
AgeCommit message (Collapse)Author
2021-02-26i2c: exynos5: Preserve high speed master codeMårten Lindahl
When the driver starts to send a message with the MASTER_ID field set (high speed), the whole I2C_ADDR register is overwritten including MASTER_ID as the SLV_ADDR_MAS field is set. This patch preserves already written fields in I2C_ADDR when writing SLV_ADDR_MAS. Fixes: 8a73cd4cfa15 ("i2c: exynos5: add High Speed I2C controller driver") Signed-off-by: Mårten Lindahl <martenli@axis.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-02-26Revert "i2c: i2c-qcom-geni: Add shutdown callback for i2c"Wolfram Sang
This reverts commit e0371298ddc51761be257698554ea507ac8bf831. It was accidently applied despite discussion still going on. Signed-off-by: Wolfram Sang <wsa@kernel.org> Acked-by: Stephen Boyd <swboyd@chromium.org>
2021-02-26i2c: designware: Get right data lengthLiguang Zhang
IC_DATA_CMD[11] indicates the first data byte received after the address phase for receive transfer in Master receiver or Slave receiver mode, this bit was set in some transfer flow. IC_DATA_CMD[7:0] contains the data to be transmitted or received on the I2C bus, so we should use the lower 8 bits to get the real data length. Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-02-26i2c: brcmstb: Fix brcmstd_send_i2c_cmd conditionMaxime Ripard
The brcmstb_send_i2c_cmd currently has a condition that is (CMD_RD || CMD_WR) which always evaluates to true, while the obvious fix is to test whether the cmd variable passed as parameter holds one of these two values. Fixes: dd1aa2524bc5 ("i2c: brcmstb: Add Broadcom settop SoC i2c controller driver") Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-02-22Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: - Generalise byte swapping assembly - Update debug addresses for STI - Validate start of physical memory with DTB - Do not clear SCTLR.nTLSMD in decompressor - amba/locomo/sa1111 devices remove method return type is void - address markers for KASAN in page table dump * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void amba: Make use of bus_type functions amba: Make the remove callback return void vfio: platform: simplify device removal amba: reorder functions amba: Fix resource leak for drivers without .remove ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions ARM: 9051/1: vdso: remove unneded extra-y addition ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible ARM: 9049/1: locomo: make locomo bus's remove callback return void ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void ARM: 9047/1: smp: remove unused variable ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB ARM: 9042/1: debug: no uncompress debugging while semihosting ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART ARM: 9039/1: assembler: generalize byte swapping macro into rev_l
2021-02-22Merge branch 'i2c/for-5.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - mostly driver updates. Bigger ones for mlxcpld and iproc. But most of them are all over the place. - removal of the efm32, sirf, u300, and zte zx bus drivers because of platform removal. So, we have a pleasant diffstat this time. - first set of cleanups in the I2C core as preparation to increase maximum length of SMBus transfers to 255 (as specified in the new standard). Better documentation of struct i2c_msg and its flags stand out here. - the testunit can now respond to SMBus block process calls which is the testcase when implementing the above new maximum length. * 'i2c/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (62 commits) i2c: remove redundant error print in stm32f7_i2c_probe i2c: testunit: add support for block process calls i2c: busses: Replace spin_lock_irqsave with spin_lock in hard IRQ dt-bindings: eeprom: at24: Document ROHM BR24G01 i2c: i801: Add support for Intel Alder Lake PCH-P i2c: mv64xxx: Fix check for missing clock after adding RPM i2c: mux: mlxcpld: Add callback to notify mux creation completion i2c: mux: mlxcpld: Extend supported mux number i2c: mux: mlxcpld: Extend driver to support word address space devices i2c: mux: mlxcpld: Get rid of adapter numbers enforcement i2c: mux: mlxcpld: Prepare mux selection infrastructure for two-byte support i2c: mux: mlxcpld: Convert driver to platform driver i2c: imx: Synthesize end of transaction events without idle interrupts i2c: i2c-qcom-geni: Add shutdown callback for i2c i2c: mv64xxx: Add runtime PM support i2c: amd-mp2: Remove unused macro i2c: amd-mp2: convert to PCI logging functions i2c: mux: mlxcpld: Move header file out of x86 realm platform/x86: mlxcpld: Update module license i2c: mux: mlxcpld: Update module license ...
2021-02-21Merge tag 'sound-5.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "A relatively calm release at this time, and no massive code changes are found in the stats, while a wide range of code refactoring and cleanup have been done. Note that this update includes the tree-wide trivial changes for dropping the return value from ISA remove callbacks, too. Below lists up some highlight: ALSA Core: - Support for the software jack injection via debugfs - Fixes for sync_stop PCM operations HD-audio and USB-audio: - A few usual HD-audio device quirks - Updates for Tegra HD-audio - More quirks for Pioneer and other USB-audio devices - Stricter state checks at USB-audio disconnection ASoC: - Continued code refactoring, cleanup and fixes in ASoC core API - A KUnit testsuite for the topology code - Lots of ASoC Intel driver Realtek codec updates, quirk additions and fixes - Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro - Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers Others: - Drop return value from ISA driver remove callback - Cleanup with DIV_ROUND_UP() macro - FireWire updates, HDSP output loopback support" * tag 'sound-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (322 commits) ALSA: hda: intel-dsp-config: add Alder Lake support ASoC: soc-pcm: fix hw param limits calculation for multi-DAI ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet ASoC: soc-pcm: fix hwparams min/max init for dpcm ALSA: hda/realtek: Quirk for HP Spectre x360 14 amp setup ALSA: usb-audio: Add implicit fb quirk for BOSS GP-10 ALSA: hda: Add another CometLake-H PCI ID ASoC: soc-pcm: add soc_pcm_hw_update_format() ASoC: soc-pcm: add soc_pcm_hw_update_chan() ASoC: soc-pcm: add soc_pcm_hw_update_rate() ASoC: wm_adsp: Remove unused control callback structure ASoC: SOF: relax ABI checks and avoid unnecessary warnings ASoC: codecs: lpass-tx-macro: add dapm widgets and route ASoC: codecs: lpass-tx-macro: add support for lpass tx macro ASoC: qcom: dt-bindings: add bindings for lpass tx macro codec ASoC: codecs: lpass-rx-macro: add iir widgets ASoC: codecs: lpass-rx-macro: add dapm widgets and route ...
2021-02-20Merge tag 'arm-platform-removal-v5.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC platform removals from Arnd Bergmann: "There are a lot of platforms that have not seen any interesting code changes in the past five years or more. I made a list and asked around which ones are no longer in use, and received confirmation about six ARM platforms and the TI C6x architecture that have all reached the end of their life upstream, with no known users remaining: - efm32 - added in 2011, first Cortex-M, no notable changes after 2013 - picoxcell - added in 2011, abandoned after 2012 acquisition - prima2 - added in 20111, no notable changes since 2015 - tango - added in 2015, sporadic changes until 2017, but abandoned - u300 - added in 2009, no notable changes since 2013 - zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes - arch/c6x - added in 2011, but work stalled soon after that A number of other platforms on the original list turned out to still have users. In some cases there are out-of-tree patches and users that plan to contribute them in the future, in other cases the code is complete and works reliably" Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/ * tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: remove u300 platform ARM: remove tango platform ARM: remove zte zx platform ARM: remove sirf prima2/atlas platforms c6x: remove architecture MAINTAINERS: Remove deleted platform efm32 ARM: drop efm32 platform ARM: Remove PicoXcell platform support ARM: dts: Remove PicoXcell platforms
2021-02-17Merge tag 'asoc-v5.12' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.12 Another quiet release in terms of features, though several of the drivers got quite a bit of work and there were a lot of general changes resulting from Morimoto-san's ongoing cleanup work. - As ever, lots of hard work by Morimoto-san cleaning up the code and making it more consistent. - Many improvements in the Intel drivers including a wide range of quirks and bug fixes. - A KUnit testsuite for the topology code. - Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro - Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers.
2021-02-12i2c: remove redundant error print in stm32f7_i2c_probeMenglong Dong
Coccinelle reports a redundant error print in stm32f7_i2c_probe. As 'platform_get_irq' already prints the error message, error print here is redundant and can be removed. Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-02-12i2c: stm32f7: fix configuration of the digital filterAlain Volmat
The digital filter related computation are present in the driver however the programming of the filter within the IP is missing. The maximum value for the DNF is wrong and should be 15 instead of 16. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-02-12i2c: busses: Replace spin_lock_irqsave with spin_lock in hard IRQWeihang Li
There is no need to do irqsave and irqrestore in context of hard IRQ. Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-02-09i2c: i801: Add support for Intel Alder Lake PCH-PJarkko Nikula
Add PCI ID of SMBus controller on Intel Alder Lake PCH-P. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-02-09i2c: mv64xxx: Fix check for missing clock after adding RPMSamuel Holland
In commit e5c02cf54154 ("i2c: mv64xxx: Add runtime PM support"), error pointers to optional clocks were replaced by NULL to simplify the resume callback implementation. However, that commit missed that the IS_ERR check in mv64xxx_of_config should be replaced with a NULL check. As a result, the check always passes, even for an invalid device tree. Fixes: e5c02cf54154 ("i2c: mv64xxx: Add runtime PM support") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-02-02amba: Make the remove callback return voidUwe Kleine-König
All amba drivers return 0 in their remove callback. Together with the driver core ignoring the return value anyhow, it doesn't make sense to return a value here. Change the remove prototype to return void, which makes it explicit that returning an error value doesn't work as expected. This simplifies changing the core remove callback to return void, too. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # for drivers/memory Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> # for hwtracing/coresight Acked-By: Vinod Koul <vkoul@kernel.org> # for dmaengine Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Takashi Iwai <tiwai@suse.de> # for sound Acked-by: Vladimir Zapolskiy <vz@mleia.com> # for memory/pl172 Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210126165835.687514-5-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2021-02-01i2c: imx: Synthesize end of transaction events without idle interruptsKevin Paul Herbert
Only the Layerscape SoCs have interrupts on bus idle, which facilitate sending events which complete slave bus transactions. Add support for synthesizing missing events. If we see a master request, or a newly addressed slave request, if the last event sent to the backend was I2C_SLAVE_READ_REQUESTED, send the backend a I2C_SLAVE_READ_PROCESSED followed by I2C_SLAVE_STOP. For all other events, send an I2C_SLAVE_STOP. Signed-off-by: Kevin Paul Herbert <kph@platinasystems.com> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-02-01i2c: i2c-qcom-geni: Add shutdown callback for i2cRoja Rani Yarubandi
If the hardware is still accessing memory after SMMU translation is disabled (as part of smmu shutdown callback), then the IOVAs (I/O virtual address) which it was using will go on the bus as the physical addresses which will result in unknown crashes like NoC/interconnect errors. So, implement shutdown callback to i2c driver to stop on-going transfer and unmap DMA mappings during system "reboot" or "shutdown". Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller") Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Reviewed-by: Akash Asthana <akashast@codeaurora.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-02-01i2c: mv64xxx: Add runtime PM supportSamuel Holland
To save power, gate the clock when the bus is inactive, during system sleep, and during shutdown. On some platforms, specifically Allwinner A13/A20, gating the clock implicitly resets the module as well. Since the module already needs to be reset after some suspend/resume cycles, it is simple enough to reset it during every runtime suspend/resume. Because the bus may be used by wakeup source IRQ threads, it needs to be functional as soon as IRQs are enabled. Thus, its system PM hooks need to run in the noirq phase. Signed-off-by: Samuel Holland <samuel@sholland.org> Tested-by: Ondrej Jirman <megous@megous.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-02-01i2c: amd-mp2: Remove unused macroRichard Neumann
Remove unused work_amd_i2c_common() macro. Signed-off-by: Richard Neumann <mail@richard-neumann.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-02-01i2c: amd-mp2: convert to PCI logging functionsRichard Neumann
Use pci_{info,warn,err,dbg} functions of the kernel's PCI API. Remove unnecessary ndev_pdev(), ndev_name() and ndev_dev() macros. While at it, remove useless __func__ from logging. Signed-off-by: Richard Neumann <mail@richard-neumann.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-28i2c: mediatek: Move suspend and resume handling to NOIRQ phaseQii Wang
Some i2c device driver indirectly uses I2C driver when it is now being suspended. The i2c devices driver is suspended during the NOIRQ phase and this cannot be changed due to other dependencies. Therefore, we also need to move the suspend handling for the I2C controller driver to the NOIRQ phase as well. Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-28i2c: tegra: Use threaded interruptDmitry Osipenko
Switch to use threaded interrupt context in order to avoid checking of "are we in interrupt?" for the code that may sleep in the IRQ handler. I2C doesn't require a very low interrupt-handling latency, hence this change doesn't introduce any noticeable effects. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-28Merge tag 'v5.11-rc5' into i2c/for-5.12Wolfram Sang
Linux 5.11-rc5
2021-01-28i2c: remove zte zx bus driverArnd Bergmann
The zte zx platform is getting removed, so this driver is no longer needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-26isa: Make the remove callback for isa drivers return voidUwe Kleine-König
The driver core ignores the return value of the remove callback, so don't give isa drivers the chance to provide a value. Adapt all isa_drivers with a remove callbacks accordingly; they all return 0 unconditionally anyhow. Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for drivers/net/can/sja1000/tscan1.c Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: Wolfram Sang <wsa@kernel.org> # for drivers/i2c/ Reviewed-by: Takashi Iway <tiwai@suse.de> # for sound/ Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for drivers/media/ Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20210122092449.426097-4-uwe@kleine-koenig.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-22i2c: sprd: depend on COMMON_CLK to fix compile testsKrzysztof Kozlowski
The I2C_SPRD uses Common Clock Framework thus it cannot be built on platforms without it (e.g. compile test on MIPS with LANTIQ): /usr/bin/mips-linux-gnu-ld: drivers/i2c/busses/i2c-sprd.o: in function `sprd_i2c_probe': i2c-sprd.c:(.text.sprd_i2c_probe+0x254): undefined reference to `clk_set_parent' Fixes: 4a2d5f663dab ("i2c: Enable compile testing for more drivers") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-22i2c: s3c2410: advertise SMBus transfers using RECV_LENWolfram Sang
This driver implements I2C_M_RECV_LEN, so it can advertise the SMBus transfers needing it. This also enables client devices to check for the RECV_LEN capability. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-22i2c: qup: advertise SMBus transfers using RECV_LENWolfram Sang
This driver implements I2C_M_RECV_LEN, so it can advertise the SMBus transfers needing it. This also enables client devices to check for the RECV_LEN capability. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-22i2c: remove u300 bus driverArnd Bergmann
The ST-Ericsson U300 platform is getting removed, so this driver is no longer needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-22i2c: remove sirf bus driverArnd Bergmann
The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Barry Song <baohua@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-22Revert "i2c: imx: Remove unused .id_table support"Fabio Estevam
Coldfire platforms are non-DT users of this driver, so keep the .id_table support. This reverts commit c610199cd392e6e2d41811ef83d85355c1b862b3. Fixes: c610199cd392 (i2c: imx: Remove unused .id_table support") Reported-by: Sascha Hauer <sha@pengutronix.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-20ARM: remove tango platformArnd Bergmann
The smp8758 (tango4) SoC was the last generation of set-top-box chips to come out of Sigma Designs, and support was added by Marc Gonzalez and Måns Rullgård between 2015 and 2017, before the company went out of business and the products were abandoned. The chip is used in some set-top-boxes such as the Popcorn Hour A-500, which could have seen some adoption by hobbyists. This has not happened in the past four years, and support for the more widely used MIPS based SoCs was never merged at all. Thanks to Marc and Måns for maintaining for the past years even after the death of the platform. Cc: Marc Gonzalez <marc.w.gonzalez@free.fr> Cc: Mans Rullgard <mans@mansr.com> Link: https://lore.kernel.org/lkml/2d643ebc-09af-a809-eb3f-2aec8ecee501@free.fr/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-17i2c: octeon: check correct size of maximum RECV_LEN packetWolfram Sang
I2C_SMBUS_BLOCK_MAX defines already the maximum number as defined in the SMBus 2.0 specs. No reason to add one to it. Fixes: 886f6f8337dd ("i2c: octeon: Support I2C_M_RECV_LEN") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Robert Richter <rric@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-17i2c: tegra: Create i2c_writesl_vi() to use with VI I2C for filling TX FIFOSowjanya Komatineni
VI I2C controller has known hardware bug where immediate multiple writes to TX_FIFO register gets stuck. Recommended software work around is to read I2C register after each write to TX_FIFO register to flush out the data. This patch implements this work around for VI I2C controller. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-17i2c: bpmp-tegra: Ignore unknown I2C_M flagsMikko Perttunen
In order to not to start returning errors when new I2C_M flags are added, change behavior to just ignore all flags that we don't know about. This includes the I2C_M_DMA_SAFE flag that already exists but causes -EINVAL to be returned for valid transactions. Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-17i2c: Drop unused efm32 bus driverUwe Kleine-König
Support for this machine was just removed, so drop the now unused i2c bus driver, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-11i2c: tegra: Wait for config load atomically while in ISRMikko Perttunen
Upon a communication error, the interrupt handler can call tegra_i2c_disable_packet_mode. This causes a sleeping poll to happen unless the current transaction was marked atomic. Fix this by making the poll happen atomically if we are in an IRQ. This matches the behavior prior to the patch mentioned in the Fixes tag. Fixes: ede2299f7101 ("i2c: tegra: Support atomic transfers") Cc: stable@vger.kernel.org Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-06i2c: mlxcpld: Add support for I2C bus frequency settingVadim Pasternak
Add support for I2C bus frequency setting according to the specific system capability. This capability is obtained from CPLD frequency setting register, which could be provided through the platform data. If such register is provided, it specifies minimal I2C bus frequency to be used for the devices attached to the I2C bus. Supported freqeuncies are 100KHz, 400KHz, 1MHz, while 100KHz is the default. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: busses: Use DEFINE_SPINLOCK() for spinlockZheng Yongjun
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: use DIV_ROUND_UP macro to do calculationZheng Yongjun
Don't open-code DIV_ROUND_UP() kernel macro. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: fix platform_get_irq.cocci warningsTian Tao
Remove dev_err() messages after platform_get_irq*() failures. drivers/i2c/busses/i2c-hix5hd2.c:417:2-9: line 417 is redundant because platform_get_irq() already prints an error Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: gpio: fix MODULE_LICENCEWolfram Sang
Let MODULE_LICENCE match the SPDX header which is correctly based on the previous textual description. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: iproc: handle rx fifo full interruptRayagonda Kokatanur
Add code to handle IS_S_RX_FIFO_FULL_SHIFT interrupt to support master write request with >= 64 bytes. Iproc has a slave rx fifo size of 64 bytes. Rx fifo full interrupt (IS_S_RX_FIFO_FULL_SHIFT) will be generated when RX fifo becomes full. This can happen if master issues write request of more than 64 bytes. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: iproc: handle master read requestRayagonda Kokatanur
Handle single or multi byte master read request with or without repeated start. Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: iproc: fix typo in slave_isr functionRayagonda Kokatanur
Fix typo in bcm_iproc_i2c_slave_isr(). Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: iproc: update slave isr mask (ISR_MASK_SLAVE)Rayagonda Kokatanur
Update slave isr mask (ISR_MASK_SLAVE) to include remaining two slave interrupts. Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: iproc: handle only slave interrupts which are enabledRayagonda Kokatanur
Handle only slave interrupts which are enabled. The IS_OFFSET register contains the interrupt status bits which will be set regardless of the enabling of the corresponding interrupt condition. One must therefore look at both IS_OFFSET and IE_OFFSET to determine whether an interrupt condition is set and enabled. Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: iproc: handle Master aborted errorRayagonda Kokatanur
Handle Master aborted error by flushing tx and rx fifo and reinitializing the hw. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: rcar: protect against supurious interrupts on V3UWolfram Sang
V3U creates spurious interrupts which we need to handle. This costs time until BUS_PHASE_DATA can be activated which is problematic for Gen2 SoCs and earlier. Because of this we introduce two interrupt handlers here which will call a generic main irq function once the timing critical stuff is done. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-05i2c: rcar: make sure irq is not threaded on Gen2 and earlierWolfram Sang
Ensure this irq runs as fast as possible. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 11:06:31 +0000