summaryrefslogtreecommitdiff
path: root/drivers/hwmon
AgeCommit message (Collapse)Author
2020-03-03hwmon: (adt7462) Fix an error return in ADT7462_REG_VOLT()Dan Carpenter
This is only called from adt7462_update_device(). The caller expects it to return zero on error. I fixed a similar issue earlier in commit a4bf06d58f21 ("hwmon: (adt7462) ADT7462_REG_VOLT_MAX() should return 0") but I missed this one. Fixes: c0b4e3ab0c76 ("adt7462: new hwmon driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Link: https://lore.kernel.org/r/20200303101608.kqjwfcazu2ylhi2a@kili.mountain Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-02-25hwmon: (pmbus/xdpe12284) Add callback for vout limits conversionVadim Pasternak
Provide read_word_data() callback for overvoltage and undervoltage output readouts conversion. These registers are presented in 'slinear11' format, while default conversion for 'vout' class for the devices is 'vid'. It is resulted in wrong conversion in pmbus_reg2data() for in{3-4}_lcrit and in{3-4}_crit attributes. ) Fixes: aaafb7c8eb1c ("hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllers") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Link: https://lore.kernel.org/r/20200224225202.19576-1-vadimp@mellanox.com [gropeck: Adjusted to mainline PMBus API] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-02-21hwmon: (w83627ehf) Fix crash seen with W83627DHG-PGuenter Roeck
Loading the driver on a system with W83627DHG-P crashes as follows. w83627ehf: Found W83627DHG-P chip at 0x290 BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 0 PID: 604 Comm: sensors Not tainted 5.6.0-rc2-00055-gca7e1fd1026c #29 Hardware name: /D425KT, BIOS MWPNT10N.86A.0132.2013.0726.1534 07/26/2013 RIP: 0010:w83627ehf_read_string+0x27/0x70 [w83627ehf] Code: [... ] RSP: 0018:ffffb95980657df8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff96caaa7f5218 RCX: 0000000000000000 RDX: 0000000000000015 RSI: 0000000000000001 RDI: ffff96caa736ec08 RBP: 0000000000000000 R08: ffffb95980657e20 R09: 0000000000000001 R10: ffff96caaa635cc0 R11: 0000000000000000 R12: ffff96caa9f7cf00 R13: ffff96caa9ec3d00 R14: ffff96caa9ec3d28 R15: ffff96caa9ec3d40 FS: 00007fbc7c4e2740(0000) GS:ffff96caabc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000129d58000 CR4: 00000000000006f0 Call Trace: ? cp_new_stat+0x12d/0x160 hwmon_attr_show_string+0x37/0x70 [hwmon] dev_attr_show+0x14/0x50 sysfs_kf_seq_show+0xb5/0x1b0 seq_read+0xcf/0x460 vfs_read+0x9b/0x150 ksys_read+0x5f/0xe0 do_syscall_64+0x48/0x190 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ... Temperature labels are not always present. Adjust sysfs attribute visibility accordingly. Reported-by: Meelis Roos <mroos@linux.ee> Suggested-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Dr. David Alan Gilbert <linux@treblig.org> Cc: Meelis Roos <mroos@linux.ee> Cc: Dr. David Alan Gilbert <linux@treblig.org> Fixes: 266cd5835947 ("hwmon: (w83627ehf) convert to with_info interface") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-02-19hwmon: (acpi_power_meter) Fix lockdep splatGuenter Roeck
Damien Le Moal reports a lockdep splat with the acpi_power_meter, observed with Linux v5.5 and later. ====================================================== WARNING: possible circular locking dependency detected 5.6.0-rc2+ #629 Not tainted ------------------------------------------------------ python/1397 is trying to acquire lock: ffff888619080070 (&resource->lock){+.+.}, at: show_power+0x3c/0xa0 [acpi_power_meter] but task is already holding lock: ffff88881643f188 (kn->count#119){++++}, at: kernfs_seq_start+0x6a/0x160 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (kn->count#119){++++}: __kernfs_remove+0x626/0x7e0 kernfs_remove_by_name_ns+0x41/0x80 remove_attrs+0xcb/0x3c0 [acpi_power_meter] acpi_power_meter_notify+0x1f7/0x310 [acpi_power_meter] acpi_ev_notify_dispatch+0x198/0x1f3 acpi_os_execute_deferred+0x4d/0x70 process_one_work+0x7c8/0x1340 worker_thread+0x94/0xc70 kthread+0x2ed/0x3f0 ret_from_fork+0x24/0x30 -> #0 (&resource->lock){+.+.}: __lock_acquire+0x20be/0x49b0 lock_acquire+0x127/0x340 __mutex_lock+0x15b/0x1350 show_power+0x3c/0xa0 [acpi_power_meter] dev_attr_show+0x3f/0x80 sysfs_kf_seq_show+0x216/0x410 seq_read+0x407/0xf90 vfs_read+0x152/0x2c0 ksys_read+0xf3/0x1d0 do_syscall_64+0x95/0x1010 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(kn->count#119); lock(&resource->lock); lock(kn->count#119); lock(&resource->lock); *** DEADLOCK *** 4 locks held by python/1397: #0: ffff8890242d64e0 (&f->f_pos_lock){+.+.}, at: __fdget_pos+0x9b/0xb0 #1: ffff889040be74e0 (&p->lock){+.+.}, at: seq_read+0x6b/0xf90 #2: ffff8890448eb880 (&of->mutex){+.+.}, at: kernfs_seq_start+0x47/0x160 #3: ffff88881643f188 (kn->count#119){++++}, at: kernfs_seq_start+0x6a/0x160 stack backtrace: CPU: 10 PID: 1397 Comm: python Not tainted 5.6.0-rc2+ #629 Hardware name: Supermicro Super Server/X11DPL-i, BIOS 3.1 05/21/2019 Call Trace: dump_stack+0x97/0xe0 check_noncircular+0x32e/0x3e0 ? print_circular_bug.isra.0+0x1e0/0x1e0 ? unwind_next_frame+0xb9a/0x1890 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe ? graph_lock+0x79/0x170 ? __lockdep_reset_lock+0x3c0/0x3c0 ? mark_lock+0xbc/0x1150 __lock_acquire+0x20be/0x49b0 ? mark_held_locks+0xe0/0xe0 ? stack_trace_save+0x91/0xc0 lock_acquire+0x127/0x340 ? show_power+0x3c/0xa0 [acpi_power_meter] ? device_remove_bin_file+0x10/0x10 ? device_remove_bin_file+0x10/0x10 __mutex_lock+0x15b/0x1350 ? show_power+0x3c/0xa0 [acpi_power_meter] ? show_power+0x3c/0xa0 [acpi_power_meter] ? mutex_lock_io_nested+0x11f0/0x11f0 ? lock_downgrade+0x6a0/0x6a0 ? kernfs_seq_start+0x47/0x160 ? lock_acquire+0x127/0x340 ? kernfs_seq_start+0x6a/0x160 ? device_remove_bin_file+0x10/0x10 ? show_power+0x3c/0xa0 [acpi_power_meter] show_power+0x3c/0xa0 [acpi_power_meter] dev_attr_show+0x3f/0x80 ? memset+0x20/0x40 sysfs_kf_seq_show+0x216/0x410 seq_read+0x407/0xf90 ? security_file_permission+0x16f/0x2c0 vfs_read+0x152/0x2c0 Problem is that reading an attribute takes the kernfs lock in the kernfs code, then resource->lock in the driver. During an ACPI notification, the opposite happens: The resource lock is taken first, followed by the kernfs lock when sysfs attributes are removed and re-created. Presumably this is now seen due to some locking related changes in kernfs after v5.4, but it was likely always a problem. Fix the problem by not blindly acquiring the lock in the notification function. It is only needed to protect the various update functions. However, those update functions are called anyway when sysfs attributes are read. This means that we can just stop calling those functions from the notifier, and the resource lock in the notifier function is no longer needed. That leaves two situations: First, METER_NOTIFY_CONFIG removes and re-allocates capability strings. While it did so under the resource lock, _displaying_ those strings was not protected, creating a race condition. To solve this problem, selectively protect both removal/creation and reporting of capability attributes with the resource lock. Second, removing and re-creating the attribute files is no longer protected by the resource lock. That doesn't matter since access to each individual attribute is protected by the kernfs lock. Userspace may get messed up if attributes disappear and reappear under its nose, but that is not different than today, and there is nothing we can do about it without major driver restructuring. Last but not least, when removing the driver, remove attribute functions first, then release capability strings. This avoids yet another race condition. Reported-by: Damien Le Moal <Damien.LeMoal@wdc.com> Cc: Damien Le Moal <Damien.LeMoal@wdc.com> Cc: stable@vger.kernel.org # v5.5+ Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-02-12hwmon: (pmbus/xdpe12284) fix typo in compatible stringsJohan Hovold
Make sure that the driver compatible strings matches the binding by removing the space between the manufacturer and model. Fixes: aaafb7c8eb1c ("hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllers") Cc: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20200212092426.24012-1-johan@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-02-09hwmon: (pmbus/ltc2978) Fix PMBus polling of MFR_COMMON definitions.Mike Jones
Change 21537dc driver PMBus polling of MFR_COMMON from bits 5/4 to bits 6/5. This fixs a LTC297X family bug where polling always returns not busy even when the part is busy. This fixes a LTC388X and LTM467X bug where polling used PEND and NOT_IN_TRANS, and BUSY was not polled, which can lead to NACKing of commands. LTC388X and LTM467X modules now poll BUSY and PEND, increasing reliability by eliminating NACKing of commands. Signed-off-by: Mike Jones <michael-a1.jones@analog.com> Link: https://lore.kernel.org/r/1580234400-2829-2-git-send-email-michael-a1.jones@analog.com Fixes: e04d1ce9bbb49 ("hwmon: (ltc2978) Add polling for chips requiring it") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-02-08Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...
2020-02-04proc: convert everything to "struct proc_ops"Alexey Dobriyan
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-27Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds
Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
2020-01-23hwmon: (k10temp) Display up to eight sets of CCD temperaturesGuenter Roeck
In HWiNFO, we see support for Tccd1, Tccd3, Tccd5, and Tccd7 temperature sensors on Zen2 based Threadripper CPUs. Checking register maps on Threadripper 3970X confirms SMN register addresses and values for those sensors. Register values observed in an idle system: 0x059950: 00000000 00000abc 00000000 00000ad8 0x059960: 00000000 00000ade 00000000 00000ae4 Under load: 0x059950: 00000000 00000c02 00000000 00000c14 0x059960: 00000000 00000c30 00000000 00000c22 More analysis shows that EPYC CPUs support up to 8 CCD temperature sensors. EPYC 7601 supports three CCD temperature sensors. Unlike Zen2 CPUs, the register space in Zen1 CPUs supports a maximum of four sensors, so only search for a maximum of four sensors on Zen1 CPUs. On top of that, in thm_10_0_sh_mask.h in the Linux kernel, we find definitions for THM_DIE{1-3}_TEMP__VALID_MASK, set to 0x00000800, as well as matching SMN addresses. This lets us conclude that bit 11 of the respective registers is a valid bit. With this assumption, the temperature offset is now 49 degrees C. This conveniently matches the documented temperature offset for Tdie, again suggesting that above registers indeed report temperatures sensor values. Assume that bit 11 is indeed a valid bit, and add support for the additional sensors. With this patch applied, output from 3970X (idle) looks as follows: k10temp-pci-00c3 Adapter: PCI adapter Tdie: +55.9°C Tctl: +55.9°C Tccd1: +39.8°C Tccd3: +43.8°C Tccd5: +43.8°C Tccd7: +44.8°C Tested-by: Michael Larabel <michael@phoronix.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (k10temp) Add debugfs supportGuenter Roeck
Show thermal and SVI registers for Family 17h CPUs. Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (k10temp) Don't show temperature limits on Ryzen (Zen) CPUsGuenter Roeck
The maximum Tdie or Tctl is not published for Ryzen CPUs. What is known, however, is that the traditional value of 70 degrees C is no longer correct. On top of that, the limit applies to Tctl, not to Tdie. Displaying it in either context is meaningless, confusing, and wrong. Stop doing it. Tested-by: Brad Campbell <lists2009@fnarfbargle.com> Tested-by: Holger Kiehl <holger.kiehl@dwd.de> Tested-by: Michael Larabel <michael@phoronix.com> Tested-by: Jonathan McDowell <noodles@earth.li> Tested-by: Ken Moffat <zarniwhoop73@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (k10temp) Show core and SoC current and voltages on Ryzen CPUsGuenter Roeck
Ryzen CPUs report core and SoC voltages and currents. Add support for it to the k10temp driver. For the time being, only report voltages and currents for Ryzen CPUs. Threadripper and EPYC appear to use a different mechanism. Tested-by: Brad Campbell <lists2009@fnarfbargle.com> Tested-by: Bernhard Gebetsberger <bernhard.gebetsberger@gmx.at> Tested-by: Holger Kiehl <holger.kiehl@dwd.de> Tested-by: Michael Larabel <michael@phoronix.com> Tested-by: Jonathan McDowell <noodles@earth.li> Tested-by: Ken Moffat <zarniwhoop73@googlemail.com> Tested-by: Darren Salt <devspam@moreofthesa.me.uk> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (k10temp) Report temperatures per CPU dieGuenter Roeck
Zen2 reports reporting temperatures per CPU die (called Core Complex Dies, or CCD, by AMD). Add support for it to the k10temp driver. Tested-by: Brad Campbell <lists2009@fnarfbargle.com> Tested-by: Bernhard Gebetsberger <bernhard.gebetsberger@gmx.at> Tested-by: Holger Kiehl <holger.kiehl@dwd.de> Tested-by: Michael Larabel <michael@phoronix.com> Tested-by: Jonathan McDowell <noodles@earth.li> Tested-by: Ken Moffat <zarniwhoop73@googlemail.com> Tested-by: Darren Salt <devspam@moreofthesa.me.uk> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hmon: (k10temp) Convert to use devm_hwmon_device_register_with_infoGuenter Roeck
Convert driver to use devm_hwmon_device_register_with_info to simplify the code and to reduce its size. Old size (x86_64): text data bss dec hex filename 8247 4488 64 12799 31ff drivers/hwmon/k10temp.o New size: text data bss dec hex filename 6778 2792 64 9634 25a2 drivers/hwmon/k10temp.o Tested-by: Brad Campbell <lists2009@fnarfbargle.com> Tested-by: Bernhard Gebetsberger <bernhard.gebetsberger@gmx.at> Tested-by: Holger Kiehl <holger.kiehl@dwd.de> Tested-by: Michael Larabel <michael@phoronix.com> Tested-by: Jonathan McDowell <noodles@earth.li> Tested-by: Ken Moffat <zarniwhoop73@googlemail.com> Tested-by: Darren Salt <devspam@moreofthesa.me.uk> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (k10temp) Use bitopsGuenter Roeck
Using bitops makes bit masks and shifts easier to read. Tested-by: Brad Campbell <lists2009@fnarfbargle.com> Tested-by: Bernhard Gebetsberger <bernhard.gebetsberger@gmx.at> Tested-by: Holger Kiehl <holger.kiehl@dwd.de> Tested-by: Michael Larabel <michael@phoronix.com> Tested-by: Jonathan McDowell <noodles@earth.li> Tested-by: Ken Moffat <zarniwhoop73@googlemail.com> Tested-by: Darren Salt <devspam@moreofthesa.me.uk> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (pwm-fan) stop fan on shutdownAkinobu Mita
The pwm-fan driver stops the fan in suspend but leaves the fan on in shutdown. It seems strange to leave the fan on in shutdown because there is no use case in my mind and the gpio-fan driver on the other hand stops in shutdown. This change turns off the fan in shutdown. If anyone complains then we'll add an optional property to switch the behavior. Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Kamil Debski <kamil@wypas.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Link: https://lore.kernel.org/r/1579534344-11694-1-git-send-email-akinobu.mita@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (adm1177) Add ADM1177 Hot Swap Controller and Digital Power Monitor ↵Beniamin Bia
driver ADM1177 is a Hot Swap Controller and Digital Power Monitor with Soft Start Pin. Datasheet: Link: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1177.pdf Signed-off-by: Beniamin Bia <beniamin.bia@analog.com> Link: https://lore.kernel.org/r/20200114112159.25998-1-beniamin.bia@analog.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllersVadim Pasternak
Add support for devices XDPE12254, XDPE12284. All these device support two pages. The below lists of VOUT_MODE command readout with their related VID protocols, Digital to Analog Converter steps, supported by these devices: VR12.0 mode, 5-mV DAC - 0x01; VR12.5 mode, 10-mV DAC - 0x02; IMVP9 mode, 5-mV DAC - 0x03; AMD mode 6.25mV - 0x10. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Link: https://lore.kernel.org/r/20200113150841.17670-5-vadimp@mellanox.com [groeck: Added missing break statement] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (pmbus/tps53679) Extend device list supported by driverVadim Pasternak
Extends driver with support of the additional devices: Texas Instruments Dual channel DCAP+ multiphase controllers: TPS53688. Extend Kconfig with added device. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Link: https://lore.kernel.org/r/20200113150841.17670-4-vadimp@mellanox.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (pmbus/core) Add support for Intel IMVP9 and AMD 6.25mV modesVadim Pasternak
Extend "vrm_version" with the type for Intel IMVP9 and AMD 6.25mV VID modes. Add calculation for those types. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Link: https://lore.kernel.org/r/20200113150841.17670-3-vadimp@mellanox.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (pmbus/core) Add support for vid mode detection per page basesVadim Pasternak
Add support for VID protocol detection per page bases, instead of detecting it based on "PMBU_VOUT" readout from page 0 for all the pages supported by particular device. The reason that some devices allows to configure different VID modes per page within the same device. Patch modifies the field "vrm_version" within the structure "pmbus_driver_info" to be per page array. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Link: https://lore.kernel.org/r/20200113150841.17670-2-vadimp@mellanox.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (pmbus/ibm-cffps) Prevent writing on_off_config with bad dataEddie James
If the user write parameters resulted in no bytes being written to the temporary buffer, then ON_OFF_CONFIG will be written with uninitialized data. Prevent this by bailing out in this case. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/1578411640-16929-1-git-send-email-eajames@linux.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (w83627ehf) Remove set but not used variable 'fan4min'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/hwmon/w83627ehf.c: In function 'w83627ehf_check_fan_inputs': drivers/hwmon/w83627ehf.c:1296:24: warning: variable 'fan4min' set but not used [-Wunused-but-set-variable] commit 62000264cfa8 ("hwmon: (w83627ehf) remove nct6775 and nct6776 support") left behind this unused variable. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200108034514.50130-1-yuehaibing@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: Driver for disk and solid state drives with temperature sensorsGuenter Roeck
Reading the temperature of ATA drives has been supported for years by userspace tools such as smarttools or hddtemp. The downside of such tools is that they need to run with super-user privilege, that the temperatures are not reported by standard tools such as 'sensors' or 'libsensors', and that drive temperatures are not available for use in the kernel's thermal subsystem. This driver solves this problem by adding support for reading the temperature of ATA drives from the kernel using the hwmon API and by adding a temperature zone for each drive. With this driver, the hard disk temperature can be read using the unprivileged 'sensors' application: $ sensors drivetemp-scsi-1-0 drivetemp-scsi-1-0 Adapter: SCSI adapter temp1: +23.0°C or directly from sysfs: $ grep . /sys/class/hwmon/hwmon9/{name,temp1_input} /sys/class/hwmon/hwmon9/name:drivetemp /sys/class/hwmon/hwmon9/temp1_input:23000 If the drive supports SCT transport and reports temperature limits, those are reported as well. drivetemp-scsi-0-0 Adapter: SCSI adapter temp1: +27.0°C (low = +0.0°C, high = +60.0°C) (crit low = -41.0°C, crit = +85.0°C) (lowest = +23.0°C, highest = +34.0°C) The driver attempts to use SCT Command Transport to read the drive temperature. If the SCT Command Transport feature set is not available, or if it does not report the drive temperature, drive temperatures may be readable through SMART attributes. Since SMART attributes are not well defined, this method is only used as fallback mechanism. Cc: Chris Healy <cphealy@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (pmbus/ibm-cffps) Fix the LED behavior when turned offEddie James
The driver should remain in control of the LED on the PSU, even while off, not the PSU firmware as previously indicated. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/1576788607-13567-4-git-send-email-eajames@linux.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (pmbus/ibm-cffps) Add the VMON property for version 2Eddie James
Version 2 of the PSU supports reading an auxiliary voltage. Use the pmbus VMON property and associated virtual register to read it. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/1576788607-13567-3-git-send-email-eajames@linux.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (pmbus/ibm-cffps) Add new manufacturer debugfs entriesEddie James
Add support for a number of manufacturer-specific registers in the debugfs entries, as well as support to read and write the PMBUS_ON_OFF_CONFIG register through debugfs. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/1576788607-13567-2-git-send-email-eajames@linux.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (pmbus) Driver for MAX20730, MAX20734, and MAX20743Guenter Roeck
Add support for Maxim MAX20730, MAX20734, MAX20743 Integrated, Step-Down Switching Regulators with PMBus support. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (w83627ehf) Now only one intrusion channelDr. David Alan Gilbert
The 2nd intrusion channel was only used on the nct6776 Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20191225023225.2785-4-linux@treblig.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (w83627ehf) Remove code not needed after nct677* removalDr. David Alan Gilbert
Now the nct677* are gone, we can clean up some flags that are always the same now and simplify some code. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20191225023225.2785-3-linux@treblig.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (w83627ehf) remove nct6775 and nct6776 supportDr. David Alan Gilbert
The nct6775 and nct6776 are supported by the separate nct6775.c driver, so remove the code from the w83627ehf driver. Suggested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20191225023225.2785-2-linux@treblig.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (pmbus) Add MAX20796 to devices supported by generic pmbus driverGuenter Roeck
MAX20796 is a dual-phase scalable integrated voltage regulator with PMBus interface. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (w83627ehf) make sensor_dev_attr_##_name variables staticChen Zhou
Fix sparse warning: drivers/hwmon/w83627ehf.c:1202:1: warning: symbol 'sensor_dev_attr_pwm1_target' was not declared. Should it be static? and many more similar messages. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Link: https://lore.kernel.org/r/20191213015605.172472-1-chenzhou10@huawei.com [groeck: Dropped all but one log message from description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (pmbus) Detect if chip is write protectedGuenter Roeck
If a chip is write protected, we can not change any limits, and we can not clear status flags. This may be the reason why clearing status flags is reported to not work for some chips. Detect the condition in the pmbus core. If the chip is write protected, set limit attributes as read-only, and set the flag indicating that the status flag should be ignored. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: Driver for MAX31730Guenter Roeck
MAX31730 is a 3-Channel Remote Temperature Sensor. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: Add support for enable attributes to hwmon coreGuenter Roeck
The hwmon ABI supports enable attributes since commit fb41a710f84e ("hwmon: Document the sensor enable attribute"), but did not add support for those attributes to the hwmon core. Do that now. Since the enable attributes are logically the most important attributes, they are added as first attribute to the attribute list. Move hwmon_in_enable from last to first place for consistency. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (w83627ehf) convert to with_info interfaceDr. David Alan Gilbert
Convert the old hwmon_device_register code to devm_hwmon_device_register_with_info. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20191124202030.45360-3-linux@treblig.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: (pmbus/ucd9000) Add support for UCD90320 Power SequencerJim Wright
Add support for the UCD90320 chip and its expanded set of GPIO pins. Signed-off-by: Jim Wright <wrightj@linux.vnet.ibm.com> Link: https://lore.kernel.org/r/20191205232411.21492-3-wrightj@linux.vnet.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23hwmon: Add intrusion templatesDr. David Alan Gilbert
Add templates for intrusion%d_alarm and intrusion%d_beep. Note, these start at 0. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20191124202030.45360-2-linux@treblig.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-17hwmon: (core) Do not use device managed functions for memory allocationsGuenter Roeck
The hwmon core uses device managed functions, tied to the hwmon parent device, for various internal memory allocations. This is problematic since hwmon device lifetime does not necessarily match its parent's device lifetime. If there is a mismatch, memory leaks will accumulate until the parent device is released. Fix the problem by managing all memory allocations internally. The only exception is memory allocation for thermal device registration, which can be tied to the hwmon device, along with thermal device registration itself. Fixes: d560168b5d0f ("hwmon: (core) New hwmon registration API") Cc: stable@vger.kernel.org # v4.14.x: 47c332deb8e8: hwmon: Deal with errors from the thermal subsystem Cc: stable@vger.kernel.org # v4.14.x: 74e3512731bd: hwmon: (core) Fix double-free in __hwmon_device_register() Cc: stable@vger.kernel.org # v4.9.x: 3a412d5e4a1c: hwmon: (core) Simplify sysfs attribute name allocation Cc: stable@vger.kernel.org # v4.9.x: 47c332deb8e8: hwmon: Deal with errors from the thermal subsystem Cc: stable@vger.kernel.org # v4.9.x: 74e3512731bd: hwmon: (core) Fix double-free in __hwmon_device_register() Cc: stable@vger.kernel.org # v4.9+ Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-17hwmon: (adt7475) Make volt2reg return same reg as reg2volt inputLuuk Paulussen
reg2volt returns the voltage that matches a given register value. Converting this back the other way with volt2reg didn't return the same register value because it used truncation instead of rounding. This meant that values read from sysfs could not be written back to sysfs to set back the same register value. With this change, volt2reg will return the same value for every voltage previously returned by reg2volt (for the set of possible input values) Signed-off-by: Luuk Paulussen <luuk.paulussen@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20191205231659.1301-1-luuk.paulussen@alliedtelesis.co.nz cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-17hwmon: (nct7802) Fix non-working alarm on voltagesGilles Buloz
No alarm is reported by /sys/.../inX_alarm In detail: The SMI Voltage status register is the only register giving a status for voltages, but it does not work like the non-SMI status registers used for temperatures and fans. A bit is set for each input crossing a threshold, in both direction, but the "inside" or "outside" limits info is not available. Also this register is cleared on read. Note : this is not explicitly spelled out in the datasheet, but from experiment. As a result if an input is crossing a threshold (min or max in any direction), the alarm is reported only once even if the input is still outside limits. Also if the alarm for another input is read before the one of this input, no alarm is reported at all. Signed-off-by: Gilles Buloz <gilles.buloz@kontron.com> Link: https://lore.kernel.org/r/5de0f566.tBga5POKAgHlmd0p%gilles.buloz@kontron.com Fixes: 3434f3783580 ("hwmon: Driver for Nuvoton NCT7802Y") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-17hwmon: (nct7802) Fix voltage limits to wrong registersGilles Buloz
in0 thresholds are written to the in2 thresholds registers in2 thresholds to in3 thresholds in3 thresholds to in4 thresholds in4 thresholds to in0 thresholds Signed-off-by: Gilles Buloz <gilles.buloz@kontron.com> Link: https://lore.kernel.org/r/5de0f509.rc0oEvPOMjbfPW1w%gilles.buloz@kontron.com Fixes: 3434f3783580 ("hwmon: Driver for Nuvoton NCT7802Y") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-12-24hwmon: (scmi-hwmon) Match scmi device by both name and protocol idSudeep Holla
The scmi bus now has support to match the driver with devices not only based on their protocol id but also based on their device name if one is available. This was added to cater the need to support multiple devices and drivers for the same protocol. Let us add the name "hwmon" to scmi_device_id table in the driver so that in matches only with device with the same name and protocol id SCMI_PROTOCOL_SENSOR. This is just for sake of completion and must not be used to add IIO support in parallel. Instead, if IIO support is added ever in future, we need to drop this hwmon driver entirely and use the iio->hwmon bridge to access the sensors as hwmon devices if needed. Cc: linux-hwmon@vger.kernel.org Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2019-12-01Merge tag 'compat-ioctl-5.5' of ↵Linus Torvalds
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-11-27Merge tag 'hwmon-for-v5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - Add support for Texas Instruments TMP512/513 - Add support for LTC2947 - Add support for BEL PFE1100 and PFE3000 - Various minor improvements and fixes * tag 'hwmon-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: dell-smm-hwmon: Add documentation hwmon: (dell-smm) Add support for disabling automatic BIOS fan control hwmon: Add driver for Texas Instruments TMP512/513 sensor chips. dt-bindings: hwmon: Add TMP512/513 docs: hwmon: Document bel-pfe pmbus driver hwmon: (pmbus) add driver for BEL PFE1100 and PFE3000 dt-bindings: hwmon: Add ltc2947 documentation hwmon: Add support for ltc2947 hwmon: (ina3221) Add summation feature support hwmon: (tmp421) Allow reading at 2Hz instead of 0.5Hz hwmon: (w83793d) remove redundant assignment to variable res hwmon: (pmbus/ibm-cffps) Add version detection capability dt-bindings: hwmon: Document ibm,cffps compatible string hwmon: abituguru: make array probe_order static, makes object smaller hwmon: (applesmc) switch to using input device polling mode hwmon: (aspeed-pwm-tacho) Use devm_platform_ioremap_resource() in aspeed_pwm_tacho_probe() hwmon: (pmbus/ibm-cffps) Fix LED blink behavior hwmon: (pmbus/ibm-cffps) Switch LEDs to blocking brightness call
2019-11-27Merge tag 'for-v5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - test_power: add support for current and charge_counter - cpcap-charger: improve charge calculation and limit default charge voltage - ab8500: convert to IIO - misc small fixes all over drivers * tag 'for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (29 commits) power: supply: bd70528: Add MODULE_ALIAS to allow module auto loading power: supply: ab8500_charger: Fix inconsistent IS_ERR and PTR_ERR power: supply: cpcap-charger: cpcap_charger_voltage_to_regval() can be static power: supply: cpcap-battery: Add basic coulomb counter calibrate support power: supply: cpcap-battery: Read and save integrator register CCI power: supply: cpcap-battery: Simplify short term power average calculation power: supply: cpcap-battery: Simplify coulomb counter calculation with div_s64 power: supply: cpcap-battery: Move coulomb counter units per lsb to ddata power: supply: cpcap-charger: Allow changing constant charge voltage power: supply: cpcap-battery: Fix handling of lowered charger voltage power: supply: cpcap-charger: Improve battery detection power: supply: cpcap-battery: Check voltage before orderly_poweroff power: supply: cpcap-charger: Limit voltage to 4.2V for battery power: supply: ab8500: Handle invalid IRQ from platform_get_irq_byname() power: supply: ab8500_fg: Do not free non-requested IRQs in probe's error path power: supply: ab8500: Cleanup probe in reverse order power: reset: at91: fix __le32 cast in reset code power: supply: abx500_chargalg: Fix code indentation mfd: Switch the AB8500 GPADC to IIO iio: adc: New driver for the AB8500 GPADC ...
2019-11-22hwmon: (dell-smm) Add support for disabling automatic BIOS fan controlGiovanni Mascellani
This patch exports standard hwmon pwmX_enable sysfs attribute for enabling or disabling automatic fan control by BIOS. Standard value "1" is for disabling automatic BIOS fan control and value "2" for enabling. By default BIOS auto mode is enabled by laptop firmware. When BIOS auto mode is enabled, custom fan speed value (set via hwmon pwmX sysfs attribute) is overwritten by SMM in few seconds and therefore any custom settings are without effect. So this is reason why implementing option for disabling BIOS auto mode is needed. So finally this patch allows kernel to set and control fan speed on laptops, but it can be dangerous (like setting speed of other fans). The SMM commands to enable or disable automatic fan control are not documented and are not the same on all Dell laptops. Therefore a whitelist is used to send the correct codes only on laptopts for which they are known. This patch was originally developed by Pali Rohár; later Giovanni Mascellani implemented the whitelist. Signed-off-by: Giovanni Mascellani <gio@debian.org> Co-Developed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Link: https://lore.kernel.org/r/20191122101519.1246458-1-gio@debian.org [groeck: Fixed checkpatch warnings] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 20:36:55 +0000