summaryrefslogtreecommitdiff
path: root/drivers/hwmon/w83627ehf.c
AgeCommit message (Collapse)Author
2011-01-08hwmon: (w83627ehf) Use pr_fmt and pr_<level>Joe Perches
Added #define pr_fmt KBUILD_MODNAME ": " fmt Converted printks to pr_<level> Coalesced any long formats Removed prefixes from formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-09-17hwmon: (w83627ehf) Use proper exit sequenceJonas Jonsson
According to the datasheet for Winbond W83627DHG the proper way to exit the Extended Function Mode is to write 0xaa to the EFER(0x2e or 0x4e). Signed-off-by: Jonas Jonsson <jonas@ludd.ltu.se> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-14hwmon: (w83627ehf) Add support for W83667HG-BGuenter Roeck
Add support for W83667HG-B (very similar to the W83667HG). Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-14hwmon: (w83627ehf) Driver cleanupGuenter Roeck
- Moved fan pwm register array pointers into per-instance data. - Only read fan pwm data for installed/supported fans. - Update fan max output and fan step output information from data in registers. - Create max_output and step_output attribute files only if respective fan pwm registers exist. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-12-15hwmon: w83627ehf updatesDaniel J Blueman
Add control of fan minimum turn-on output levels, decoupling it from the fan turn-off output level. Add control of rate of change of fan output level. These in turn allow lower turn-off rotor speed and smoother transitions for better thermal and acoustic control authority. Add support for constant fan speed and proportional-response operations modes. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: David Hubbard <david.c.hubbard@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-15hwmon: Include <linux/io.h> instead of <asm/io.h>H Hartley Sweeten
Drivers should be including <linux/io.h> instead of <asm/io.h>. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Alistair John Strachan <alistair@devzero.co.uk> Cc: Nicolas Boichat <nicolas@boichat.ch> Cc: Juerg Haefliger <juergh@gmail.com> Cc: Frank Seidel <frank@f-seidel.de> Acked-by: Jim Cromie <jim.cromie@gmail.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Roger Lucas <vt8231@hiddenengine.co.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-06-15hwmon: (w83627ehf) Add W83627DHG-P supportJean Delvare
Add support for the new incarnation of the Winbond/Nuvoton W83627DHG chip known as W83627DHG-P. It is basically the same as the original W83627DHG with an additional automatic can speed control mode (not supported by the driver yet.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Madhu <madhu.chinakonda@gmail.com>
2009-03-30hwmon: (w83627ehf) Only expose in6 or temp3 on the W83667HGGong Jun
The pin for in6 and temp3 is shared on the W83667HG, so only one of these features can be supported on any given system. Let the driver select which one depending on the temp3 disabled bit. Signed-off-by: Gong Jun <JGong@nuvoton.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-30hwmon: (w83627ehf) Add support for W83667HGGong Jun
Add initial support for the Nuvoton W83667HG chip to the w83627ehf driver. It has been tested on ASUS P5QL PRO by Gong Jun. At the moment there is still a usability issue which is that only in6 or temp3 can be present on the W83667HG, so the driver shouldn't expose both. This will be addressed later. Signed-off-by: Gong Jun <JGong@nuvoton.com> Acked-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-30hwmon: (w83627ehf) Invert fan pin variables logicJean Delvare
Use positive logic for fan pin variables (variable is set if pin is used for fan), instead of negative logic which is error prone. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Gong Jun <JGong@nuvoton.com>
2009-02-17hwmon: Fix ACPI resource check error handlingHans de Goede
This patch fixes a number of cases where things were not properly cleaned up when acpi_check_resource_conflict() returned an error, causing oopses such as the one reported here: https://bugzilla.redhat.com/show_bug.cgi?id=483208 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-07hwmon: Fix various typosJean Delvare
Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: David Hubbard <david.c.hubbard@gmail.com>
2009-01-07hwmon: Check for ACPI resource conflictsJean Delvare
Check for ACPI resource conflicts in hwmon drivers. I've included all Super-I/O and PCI drivers. I've voluntarily left out: * Vendor-specific drivers: if they conflicted on any system, this would pretty much mean that they conflict on all systems, and we would know by now. * Legacy ISA drivers (lm78 and w83781d): they only support chips found on old designs were ACPI either wasn't supported or didn't deal with thermal management. * Drivers accessing the I/O resources indirectly (e.g. through SMBus): the checks are already done where they belong, i.e. in the bus drivers. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: David Hubbard <david.c.hubbard@gmail.com>
2008-02-07hwmon: (w83627ehf) The W83627DHG has 8 VID pinsJean Delvare
While the W83627EHF/EHG has only 6 VID pins, the W83627DHG has 8 VID pins, to support VRD 11.0. Add support for this. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07hwmon: Let the user override the detected Super-I/O device IDJean Delvare
While it is possible to force SMBus-based hardware monitoring chip drivers to drive a not officially supported device, we do not have this possibility for Super-I/O-based drivers. That's unfortunate because sometimes newer chips are fully compatible and just forcing the driver to load would work. Instead of that we have to tell the users to recompile the kernel driver, which isn't an easy task for everyone. So, I propose that we add a module parameter to all Super-I/O based hardware monitoring drivers, letting advanced users force the driver to load on their machine. The user has to provide the device ID of a supposedly compatible device. This requires looking at the source code or a datasheet, so I am confident that users can't randomly force a driver without knowing what they are doing. Thus this should be relatively safe. As you can see from the code, the implementation is pretty simple and unintrusive. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-01-03hwmon: (w83627ehf) Be more careful when changing VID input levelJean Delvare
The VID input level change has been reported to cause trouble. Be more careful in this respect: * Only change the level on the W83627EHF/EHG. The W83627DHG is more complex in this respect. * Don't change the level if the VID pins are in output mode. * Only set the level to TTL if VRM 9.x is used. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-10-09hwmon: Convert from class_device to deviceTony Jones
Convert from class_device to device for hwmon_device_register/unregister Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-10-09hwmon: Allow writing of negative trigger temperaturesChristian Hohnstaedt
- replace differing temperature variable types by long - use strtol() instead of strtoul() for conversion Signed-off-by: Christian Hohnstaedt <chohnstaedt@innominate.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-08-12hwmon: (w83627ehf) don't assume bank 0Jean Delvare
Don't assume that the default bank is 0. For one thing, we don't even set it to 0 when the driver is loaded, so the initial state might be different. For another, something (say, the BIOS) might access the chip and leave with the bank set to something different, so assuming that the bank value is 0 is not safe. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-08-12hwmon: (w83627ehf) read fan_div values during probeMark M. Hoffman
This patch forces the driver to read the fan divider values during early init. Otherwise, a call to store_fan_min() could access uninitialized variables. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19hwmon/w83627ehf: Be quiet when no chip is foundJean Delvare
This fixes bug #8593: http://bugzilla.kernel.org/show_bug.cgi?id=8593 Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: No need to initialize fan_minJean Delvare
We don't need to initialize fan_min in this driver, as the fan_div attributes are read-only. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Export the thermal sensor typesJean Delvare
Add support for the w83627ehf thermal sensor types. I made them read-only, as the BIOS is supposed to set them up properly. This information makes it easier to find out which temperature channel corresponds to the CPU. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Enable VBAT monitoringJean Delvare
If VBAT monitoring is disabled, enable it. Original patch from an anonymous contributor on the lm-sensors trac system: http://lm-sensors.org/ticket/2218 Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Add support for the VID inputsJean Delvare
The W83627EHF and similar chips have 6 VID input pins, add support for them. The driver changes the input voltage level automatically if the current setting is not correct for the detected CPU model. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Fix timing issuesJean Delvare
* I have experimental evidence that the W83627EHG needs more than 1 second to refresh all the measured values. Increase the caching time to 1.5 second. * When changing a fan clock divider, the corresponding fan speed measurement register is no longer valid, until the next time the chip will refresh it. One way to fix this is to pretend that the cache is still valid for one more period (1.5 second.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Add error messages for two error casesDavid Hubbard
If the Super-I/O device is disabled, it is likely the BIOS has a good reason for leaving it disabled, so give a warning when enabling it -- it's not likely to be wired correctly or be able to give good data. Also, if the Super-I/O device is configured with an address of 0, the driver refuses to initialize it. Signed-off-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Convert to a platform driverDavid Hubbard
Remove i2c-isa from the w83627ehf driver, and use a platform driver instead. Signed-off-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-07-19hwmon/w83627ehf: Preserve speed reading when changing fan minJean Delvare
The w83627ehf driver changes the fan clock divider automatically when a new min fan speed is set. It is supposed to preserve the fan speed reading while doing so, bug doesn't really. Fix it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-04-24hwmon/w83627ehf: Don't redefine REGION_OFFSETJean Delvare
On ia64, kernel headers define REGION_OFFSET so we can't use that. Reported by Andrew Morton. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-17hwmon/w83627ehf: Fix the fan5 clock divider writeJean Delvare
Users have been complaining about the w83627ehf driver flooding their logs with debug messages like: w83627ehf 9191-0a10: Increasing fan 4 clock divider from 64 to 128 or: w83627ehf 9191-0290: Increasing fan 4 clock divider from 4 to 8 The reason is that we failed to actually write the LSB of the encoded clock divider value for that fan, causing the next read to report the same old value again and again. Additionally, the fan number was improperly reported, making the bug harder to find. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14hwmon/w83627ehf: Add support for the W83627DHG chipDavid Hubbard
Signed-off-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2006-12-12hwmon: Update Rudolf Marek's e-mail addressJean Delvare
The Silicon Hill club is not what it used to be. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2006-10-18w83627ehf: Fix the detection of fan5Rudolf Marek
Fix the detection of fan5 and preserve the bit between the register writes, because the bit is write only. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28hwmon: Remove Yuan Mu's addressJean Delvare
hwmon: Remove Yuan Mu's address Yuan Mu no longer works at Winbond. I wish to publicly thank Yuan for his help with Winbond hardware monitoring chips support during the past 10 months. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28w83627ehf: Fix unchecked return statusDavid Hubbard
w83627ehf: Fix unchecked return status Fix: check return value from device_create_file() Fix: call device_remove_file() on error and module unload Fix: call hwmon_device_register() after device_create_file() to eliminate race Signed-off-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28hwmon: Add fan speed control features to w83627ehfRudolf Marek
This patch adds long-awaited support for automatic fan modes. Based on the work of Yuan Mu from Winbond, I finished the support with the great help of David Hubbard. Signed-off-by: Yuan Mu <Ymu@Winbond.com.tw> Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c-isa: Restore driver ownerJean Delvare
i2c-isa: Restore driver owner Commit 2b48716d1d2f2edb1e7cbc5ecf1cb2cb39373e33 back in January 2006 was a bit overzealous. It removed .owner from all i2c drivers, including i2c-isa ones, while they still need it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] w83627ehf: Add alarms supportJean Delvare
Add alarms support for the W83627EHF/EHG hardware monitoring chip. This is based on an earlier patch from Rudolf Marek. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] w83627ehf: Add voltage inputs supportRudolf Marek
Add the voltage measuring support to W83627EHF. The code is based on the patch provided by Yuan Mu from Winbond. Signed-off-by: Yuan Mu <Ymu@winbond.com.tw> Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] w83627ehf: Refactor the sysfs interfaceYuan Mu
Use dynamic sysfs callbacks and array of attributes to reduce the w83627ehf driver size. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23[PATCH] hwmon: Semaphore to mutex conversionsIngo Molnar
convert drivers/hwmon/*.c semaphore use to mutexes. the conversion was generated via scripts, and the result was validated automatically via a script as well. all affected hwmon drivers were build-tested. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-05[PATCH] I2C: Remove .owner setting from i2c_driver as it's no longer neededGreg Kroah-Hartman
Now that i2c_add_driver() doesn't need the module owner to be set by hand, we can delete it from the drivers. This patch catches all of the drivers that I found in the current tree (if a driver sets the .owner by hand, it's not a problem, just not needed.) Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Jean Delvare <khali@linux-fr.org>
2006-01-05[PATCH] i2c: Drop i2c_driver.{owner,name}, 3 of 11Laurent Riffard
We should use the i2c_driver.driver's .name and .owner fields instead of the i2c_driver's ones. This patch updates the hwmon drivers. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] hwmon: kzalloc conversionDeepak Saxena
Use kzalloc instead of kmalloc+memset in all hardware monitoring drivers. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] hwmon: Fix w83627ehf/hf vs PNPACPI conflict (bug #4014)Petr Vandrovec
This patch changes w83627hf and w83627ehf drivers to reserve only ports 0x295-0x296, instead of full 0x290-0x297 range. While some other sensors chips respond to all addresses in 0x290-0x297 range, Winbond chips respond to 0x295-0x296 only (this behavior is implied by documentation, and matches behavior observed on real systems). This is not problem alone, as no BIOS was found to put something at these unused addresses, and sensors chip itself provides nothing there as well. But in addition to only respond to these two addresses, also BIOS vendors report in their ACPI-PnP structures that there is some resource at I/O address 0x295 of length 2. And when later this hwmon driver attempts to request region with base 0x290/length 8, it fails as one request_region cannot span more than one device. Due to this we have to ask only for region this hardware really occupies, otherwise driver cannot be loaded on systems with ACPI-PnP enabled. Signed-off-by: Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] I2C: refactor message in i2c_detach_clientJean Delvare
We could refactor the error message 34 different i2c drivers print if i2c_detach_client() fails in this function itself. Saves quite a few lines of code. Documentation is updated to reflect that change. Note that this patch should be applied after Rudolf Marek's w83792d patches. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] I2C: Separate non-i2c hwmon drivers from i2c-core (5/9)Jean Delvare
Call the ISA chip drivers detection function directly instead of relying on i2c_detect. The net effect is that address lists won't be handled anymore, but they were mostly useless in the ISA case anyway (pc87360, smsc47m1, smsc47b397 had already dropped them). We don't need to handle multiple devices, all we may need is a way to force a given address instead of the original one (some drivers already do: sis5595, via686a, w83627hf), and, for drivers supporting multiple chips, a way to force one given kind. All this may be added later on demand, but I actually don't think there will be much demand. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] I2C: Separate non-i2c hwmon drivers from i2c-core (3/9)Jean Delvare
Convert the 10 ISA hardware monitoring drivers (it87, lm78, pc87360, sis5595, smsc47b397, smsc47m1, via686a, w83627hf, w83627ehf, w83781d) to explicitely register with i2c-isa. For hybrid drivers (it87, lm78, w83781d), we now have two separate instances of i2c_driver, one for the I2C interface of the chip, and one for ISA interface. In the long run, the one for ISA will be replaced with a different driver type. At this point, all drivers are working again, except for missing dependencies in Kconfig. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] I2C hwmon: add hwmon sysfs class to driversMark M. Hoffman
This patch modifies sensors chip drivers to make use of the new sysfs class "hwmon". Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-05 00:20:34 +0000