| Age | Commit message (Collapse) | Author |
|---|
|
slow_virt_to_phys() is only implemented for arch/x86.
Remove its use in arch independent Hyper-V drivers, and
replace with test for vmalloc() address followed by
appropriate v-to-p function. This follows the typical
pattern of other drivers and avoids the need to implement
slow_virt_to_phys() for Hyper-V on ARM64.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Before setting channel->rescind in vmbus_rescind_cleanup(), we should make
sure the channel callback won't run any more, otherwise a high-level
driver like pci_hyperv, which may be infinitely waiting for the host VSP's
response and notices the channel has been rescinded, can't safely give
up: e.g., in hv_pci_protocol_negotiation() -> wait_for_response(), it's
unsafe to exit from wait_for_response() and proceed with the on-stack
variable "comp_pkt" popped. The issue was originally spotted by
Michael Kelley <mikelley@microsoft.com>.
In vmbus_close_internal(), the patch also minimizes the range protected by
disabling/enabling channel->callback_event: we don't really need that for
the whole function.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The current rescind processing code will not correctly handle
the case where the host immediately rescinds a channel that has
been offerred. In this case, we could be blocked in the open call and
since the channel is rescinded, the host will not respond and we could
be blocked forever in the vmbus open call.i Fix this problem.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added an additional set of trace points for when channel gets notified
or signals host.
Suggested-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add tracepoint to CHANNELMSG_TL_CONNECT_REQUEST sender.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add tracepoint to CHANNELMSG_GPADL_TEARDOWN sender.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add tracepoint to CHANNELMSG_GPADL_HEADER/CHANNELMSG_GPADL_BODY sender.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add tracepoint to CHANNELMSG_CLOSECHANNEL sender.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add tracepoint to CHANNELMSG_OPENCHANNEL sender.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make sure and initialize reserved fields in messages to host,
rather than passing stack junk.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch addresses the following bugs in the current rescind handling code:
1. Fixes a race condition where we may be invoking hv_process_channel_removal()
on an already freed channel.
2. Prevents indefinite wait when rescinding sub-channels by correctly setting
the probe_complete state.
I would like to thank Dexuan for patiently reviewing earlier versions of this
patch and identifying many of the issues fixed here.
Greg, please apply this to 4.14-final.
Fixes: '54a66265d675 ("Drivers: hv: vmbus: Fix rescind handling")'
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Cc: stable@vger.kernel.org # (4.13 and above)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull networking updates from David Miller:
1) Support ipv6 checksum offload in sunvnet driver, from Shannon
Nelson.
2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
Dumazet.
3) Allow generic XDP to work on virtual devices, from John Fastabend.
4) Add bpf device maps and XDP_REDIRECT, which can be used to build
arbitrary switching frameworks using XDP. From John Fastabend.
5) Remove UFO offloads from the tree, gave us little other than bugs.
6) Remove the IPSEC flow cache, from Florian Westphal.
7) Support ipv6 route offload in mlxsw driver.
8) Support VF representors in bnxt_en, from Sathya Perla.
9) Add support for forward error correction modes to ethtool, from
Vidya Sagar Ravipati.
10) Add time filter for packet scheduler action dumping, from Jamal Hadi
Salim.
11) Extend the zerocopy sendmsg() used by virtio and tap to regular
sockets via MSG_ZEROCOPY. From Willem de Bruijn.
12) Significantly rework value tracking in the BPF verifier, from Edward
Cree.
13) Add new jump instructions to eBPF, from Daniel Borkmann.
14) Rework rtnetlink plumbing so that operations can be run without
taking the RTNL semaphore. From Florian Westphal.
15) Support XDP in tap driver, from Jason Wang.
16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.
17) Add Huawei hinic ethernet driver.
18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
Delalande.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
i40e: avoid NVM acquire deadlock during NVM update
drivers: net: xgene: Remove return statement from void function
drivers: net: xgene: Configure tx/rx delay for ACPI
drivers: net: xgene: Read tx/rx delay for ACPI
rocker: fix kcalloc parameter order
rds: Fix non-atomic operation on shared flag variable
net: sched: don't use GFP_KERNEL under spin lock
vhost_net: correctly check tx avail during rx busy polling
net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
rxrpc: Make service connection lookup always check for retry
net: stmmac: Delete dead code for MDIO registration
gianfar: Fix Tx flow control deactivation
cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
cxgb4: Fix pause frame count in t4_get_port_stats
cxgb4: fix memory leak
tun: rename generic_xdp to skb_xdp
tun: reserve extra headroom only when XDP is set
net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
net: dsa: bcm_sf2: Advertise number of egress queues
...
|
|
The only usage of vmbus_sendpacket_ctl was by vmbus_sendpacket.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function vmbus_sendpacket_pagebuffer_ctl was never used directly.
Just have vmbus_send_pagebuffer
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This function is not used anywhere in current code.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch handles the following issues that were observed when we are
handling racing channel offer message and rescind message for the same
offer:
1. Since the host does not respond to messages on a rescinded channel,
in the current code, we could be indefinitely blocked on the vmbus_open() call.
2. When a rescinded channel is being closed, if there is a pending interrupt on the
channel, we could end up freeing the channel that the interrupt handler would run on.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This problem shows up in 4.11 when netvsc driver is removed and reloaded.
The problem is that the channel is closed during module removal and the
tasklet for processing responses is disabled. When module is reloaded
the channel is reopened but the tasklet is marked as disabled.
The fix is to re-enable tasklet at the end of close which gets it back
to the initial state.
The issue is less urgent in 4.12 since network driver now uses NAPI
and not the tasklet; and other VMBUS devices are rarely unloaded/reloaded.
Fixes: dad72a1d2844 ("vmbus: remove hv_event_tasklet_disable/enable")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the rescind handling. This patch addresses the following rescind
scenario that is currently not handled correctly:
If a rescind were to be received while the offer is still being
peocessed, we will be blocked indefinitely since the rescind message
is handled on the same work element as the offer message. Fix this
issue.
I would like to thank Dexuan Cui <decui@microsoft.com> and
Long Li <longli@microsoft.com> for working with me on this patch.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Several spelling errors in comments
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When we close a channel that has been rescinded, we will leak memory since
vmbus_teardown_gpadl() returns an error. Fix this so that we can properly
cleanup the memory allocated to the ring buffers.
Fixes: ccb61f8a99e6 ("Drivers: hv: vmbus: Fix a rescind handling bug")
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With the recent introduction of per-channel tasklet, we need to update
the way we handle the 3 concurrency issues:
1. hv_process_channel_removal -> percpu_channel_deq vs.
vmbus_chan_sched -> list_for_each_entry(..., percpu_list);
2. vmbus_process_offer -> percpu_channel_enq/deq vs. vmbus_chan_sched.
3. vmbus_close_internal vs. the per-channel tasklet vmbus_on_event;
The first 2 issues can be handled by Stephen's recent patch
"vmbus: use rcu for per-cpu channel list", and the third issue
can be handled by calling tasklet_disable in vmbus_close_internal here.
We don't need the original hv_event_tasklet_disable/enable since we
now use per-channel tasklet instead of the previous per-CPU tasklet,
and actually we must remove them due to the side effect now:
vmbus_process_offer -> hv_event_tasklet_enable -> tasklet_schedule will
start the per-channel callback prematurely, cauing NULL dereferencing
(the channel may haven't been properly configured to run the callback yet).
Fixes: 631e63a9f346 ("vmbus: change to per channel tasklet")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix typos and add the following to the scripts/spelling.txt:
disble||disable
disbled||disabled
I kept the TSL2563_INT_DISBLED in /drivers/iio/light/tsl2563.c
untouched. The macro is not referenced at all, but this commit is
touching only comment blocks just in case.
Link: http://lkml.kernel.org/r/1481573103-11329-20-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
All current usage of vmbus write uses the acquire_lock flag, therefore
having it be optional is unnecessary. This also fixes a sparse warning
since sparse doesn't like when a function has conditional locking.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make the event handling tasklet per channel rather than per-cpu.
This allows for better fairness when getting lots of data on the same
cpu.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since sendpacket no longer uses kickq argument remove it.
Remove it no longer used xmit_more in sendpacket in netvsc as well.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The flag to cause notification of host is unused after
commit a01a291a282f7c2e ("Drivers: hv: vmbus: Base host signaling
strictly on the ring state"). Therefore remove it from the ring
buffer internal API.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use standard kernel operations for find first set bit to traverse
the channel bit array. This has added benefit of speeding up
lookup on 64 bit and because it uses find first set instruction.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The host can rescind a channel that has been offered to the
guest and once the channel is rescinded, the host does not
respond to any requests on that channel. Deal with the case where
the guest may be blocked waiting for a response from the host.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DoS protection conditions were altered in WS2016 and now it's easy to get
-EAGAIN returned from vmbus_post_msg() (e.g. when we try changing MTU on a
netvsc device in a loop). All vmbus_post_msg() callers don't retry the
operation and we usually end up with a non-functional device or crash.
While host's DoS protection conditions are unknown to me my tests show that
it can take up to 10 seconds before the message is sent so doing udelay()
is not an option, we really need to sleep. Almost all vmbus_post_msg()
callers are ready to sleep but there is one special case:
vmbus_initiate_unload() which can be called from interrupt/NMI context and
we can't sleep there. I'm also not sure about the lonely
vmbus_send_tl_connect_request() which has no in-tree users but its external
users are most likely waiting for the host to reply so sleeping there is
also appropriate.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signal the host when we determine the host is to be signaled -
on th read path. The currrent code determines the need to signal in the
ringbuffer code and actually issues the signal elsewhere. This can result
in the host viewing this interrupt as spurious since the host may also
poll the channel. Make the necessary adjustments.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signal the host when we determine the host is to be signaled.
The currrent code determines the need to signal in the ringbuffer
code and actually issues the signal elsewhere. This can result
in the host viewing this interrupt as spurious since the host may also
poll the channel. Make the necessary adjustments.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
One of the factors that can result in the host concluding that a given
guest in mounting a DOS attack is if the guest generates interrupts
to the host when the host is not expecting it. If these "spurious"
interrupts reach a certain rate, the host can throttle the guest to
minimize the impact. The host computation of the "expected number
of interrupts" is strictly based on the ring transitions. Until
the host logic is fixed, base the guest logic to interrupt solely
on the ring state.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make it possible to always use a single memcpy() or to provide a direct
link to a packet on the ring buffer by creating virtual mapping for two
copies of the ring buffer with vmap(). Utilize currently empty
hv_ringbuffer_cleanup() to do the unmap.
While on it, replace sizeof(struct hv_ring_buffer) check
in hv_ringbuffer_init() with BUILD_BUG_ON() as it is a compile time check.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In preparation for doing wrap around mappings for ring buffers cleanup
vmbus_open() function:
- check that ring sizes are PAGE_SIZE aligned (they are for all in-kernel
drivers now);
- kfree(open_info) on error only after we kzalloc() it (not an issue as it
is valid to call kfree(NULL);
- rename poorly named labels;
- use alloc_pages() instead of __get_free_pages() as we need struct page
pointer for future.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On Hyper-V, performance critical channels use the monitor
mechanism to signal the host when the guest posts mesages
for the host. This mechanism minimizes the hypervisor intercepts
and also makes the host more efficient in that each time the
host is woken up, it processes a batch of messages as opposed to
just one. The goal here is improve the throughput and this is at
the expense of increased latency.
Implement a mechanism to let the client driver decide if latency
is important.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For synthetic NIC channels, enable explicit signaling policy as netvsc wants to
explicitly control when the host is to be signaled.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a rare race when we remove an entry from the global list
hv_context.percpu_list[cpu] in hv_process_channel_removal() ->
percpu_channel_deq() -> list_del(): at this time, if vmbus_on_event() ->
process_chn_event() -> pcpu_relid2channel() is trying to query the list,
we can get the kernel fault.
Similarly, we also have the issue in the code path: vmbus_process_offer() ->
percpu_channel_enq().
We can resolve the issue by disabling the tasklet when updating the list.
The patch also moves vmbus_release_relid() to a later place where
the channel has been removed from the per-cpu and the global lists.
Reported-by: Rolf Neugebauer <rolf.neugebauer@docker.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
vmbus_teardown_gpadl() can result in infinite wait when it is called on 5
second timeout in vmbus_open(). The issue is caused by the fact that gpadl
teardown operation won't ever succeed for an opened channel and the timeout
isn't always enough. As a guest, we can always trust the host to respond to
our request (and there is nothing we can do if it doesn't).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In some cases create_gpadl_header() allocates submessages but we never
free them.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We use messagecount only once in vmbus_establish_gpadl() to check if
it is safe to iterate through the submsglist. We can just initialize
the list header in all cases in create_gpadl_header() instead.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On the channel send side, many of the VMBUS
device drivers explicity serialize access to the
outgoing ring buffer. Give more control to the
VMBUS device drivers in terms how to serialize
accesss to the outgoing ring buffer.
The default behavior will be to aquire the
ring lock to preserve the current behavior.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A function to send the type of message is also added.
The coming net/hvsock driver will use this function to proactively request
the host to offer a VMBus channel for a new hvsock connection.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When the hvsock channel's outbound ringbuffer is full (i.e.,
hv_ringbuffer_write() returns -EAGAIN), we should avoid the unnecessary
signaling the host.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, there is only one user for hv_ringbuffer_read()/
hv_ringbuffer_peak() functions and the usage of these functions is:
- insecure as we drop ring_lock between them, someone else (in theory
only) can acquire it in between;
- non-optimal as we do a number of things (acquire/release the above
mentioned lock, calculate available space on the ring, ...) twice and
this path is performance-critical.
Remove hv_ringbuffer_peek() moving the logic from __vmbus_recvpacket() to
hv_ringbuffer_read().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
vmbus_recvpacket()/vmbus_recvpacket_raw()
vmbus_recvpacket() and vmbus_recvpacket_raw() are almost identical but
there are two discrepancies:
1) vmbus_recvpacket() doesn't propagate errors from hv_ringbuffer_read()
which looks like it is not desired.
2) There is an error message printed in packetlen > bufferlen case in
vmbus_recvpacket(). I'm removing it as it is usless for users to see
such messages and /vmbus_recvpacket_raw() doesn't have it.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently we have two policies for deciding when to signal the host:
One based on the ring buffer state and the other based on what the
VMBUS client driver wants to do. Consider the case when the client
wants to explicitly control when to signal the host. In this case,
if the client were to defer signaling, we will not be able to signal
the host subsequently when the client does want to signal since the
ring buffer state will prevent the signaling. Implement logic to
have only one signaling policy in force for a given channel.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Tested-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: <stable@vger.kernel.org> # v4.2+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the path vmbus_onoffer_rescind() -> vmbus_device_unregister() ->
device_unregister() -> ... -> __device_release_driver(), we can see for a
device without a driver loaded: dev->driver is NULL, so
dev->bus->remove(dev), namely vmbus_remove(), isn't invoked.
As a result, vmbus_remove() -> hv_process_channel_removal() isn't invoked
and some cleanups(like sending a CHANNELMSG_RELID_RELEASED message to the
host) aren't done.
We can demo the issue this way:
1. rmmod hv_utils;
2. disable the Heartbeat Integration Service in Hyper-V Manager and lsvmbus
shows the device disappears.
3. re-enable the Heartbeat in Hyper-V Manager and modprobe hv_utils, but
lsvmbus shows the device can't appear again.
This is because, the host thinks the VM hasn't released the relid, so can't
re-offer the device to the VM.
We can fix the issue by moving hv_process_channel_removal()
from vmbus_close_internal() to vmbus_device_release(), since the latter is
always invoked on device_unregister(), whether or not the dev has a driver
loaded.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This fixes an incorrect assumption of channel state in the function.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
process_chn_event(), running in the tasklet, can race with
vmbus_close_internal() in the case of SMP guest, e.g., when the former is
accessing channel->inbound.ring_buffer, the latter could be freeing the
ring_buffer pages.
To resolve the race, we can serialize them by disabling the tasklet when
the latter is running here.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
