summaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)Author
2014-12-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - i2c-hid race condition fix from Jean-Baptiste Maneyrol - Logitech driver now supports vendor-specific HID++ protocol, allowing us to deliver a full multitouch support on wider range of Logitech touchpads. Written by Benjamin Tissoires - MS Surface Pro 3 Type Cover support added by Alan Wu - RMI touchpad support improvements from Andrew Duggan - a lot of updates to Wacom driver from Jason Gerecke and Ping Cheng - various small fixes all over the place * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (56 commits) HID: rmi: The address of query8 must be calculated based on which query registers are present HID: rmi: Check for additional ACM registers appended to F11 data report HID: i2c-hid: prevent buffer overflow in early IRQ HID: logitech-hidpp: disable io in probe error path HID: logitech-hidpp: add boundary check for name retrieval HID: logitech-hidpp: check name retrieval return code HID: logitech-hidpp: do not return the name length HID: wacom: Report input events for each finger on generic devices HID: wacom: Initialize MT slots for generic devices at post_parse_hid HID: wacom: Update maximum X/Y accounding to outbound offset HID: wacom: Add support for DTU-1031X HID: wacom: add defines for new Cintiq and DTU outbound tracking HID: wacom: fix freeze on open when autosuspend is on HID: wacom: re-add accidentally dropped Lenovo PID HID: make hid_report_len as a static inline function in hid.h HID: wacom: Consult the application usage when determining field type HID: wacom: PAD is independent with pen/touch HID: multitouch: Add quirk for VTL touch panels HID: i2c-hid: fix race condition reading reports HID: wacom: Add angular resolution data to some ABS axes ...
2014-12-12Merge branches 'for-3.19/hid-report-len', 'for-3.19/i2c-hid', ↵Jiri Kosina
'for-3.19/lenovo', 'for-3.19/logitech', 'for-3.19/microsoft', 'for-3.19/plantronics', 'for-3.19/rmi', 'for-3.19/sony' and 'for-3.19/wacom' into for-linus
2014-12-12HID: rmi: The address of query8 must be calculated based on which query ↵Andrew Duggan
registers are present If a touchpad does not report relative data then query 6 will not be present and the address of query 8 will be one less. This patches calculates the location of query 8 instead of hardcoding the offset. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-12HID: rmi: Check for additional ACM registers appended to F11 data reportAndrew Duggan
If a touchpad reports the F11 data40 register then this indicates that the touchpad reports additional ACM (Accidental Contact Mitigation) data after the F11 data in the HID attention report. These additional bytes shift the position of the F30 button data causing the driver to incorrectly report button state when this functionality is present. This patch accounts for the additional data in the report. Fixes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1398533 Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-12Merge branches 'for-3.18/upstream-fixes' and 'for-3.19/upstream' into for-linusJiri Kosina
Conflicts: drivers/hid/hid-input.c
2014-12-12HID: i2c-hid: prevent buffer overflow in early IRQGwendal Grignou
Before ->start() is called, bufsize size is set to HID_MIN_BUFFER_SIZE, 64 bytes. While processing the IRQ, we were asking to receive up to wMaxInputLength bytes, which can be bigger than 64 bytes. Later, when ->start is run, a proper bufsize will be calculated. Given wMaxInputLength is said to be unreliable in other part of the code, set to receive only what we can even if it results in truncated reports. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-11HID: logitech-hidpp: disable io in probe error pathPeter Wu
Balance a hid_device_io_start() call with hid_device_io_stop() in the error path. This avoids processing of HID reports when the probe fails which possibly leads to invalid memory access in hid_device_probe() as report_enum->report_id_hash might already be freed via hid_close_report(). hid_set_drvdata() is called before wtp_allocate, be consistent and clear drvdata too on the error path of wtp_allocate. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-11HID: logitech-hidpp: add boundary check for name retrievalPeter Wu
The HID response has a limited size. Do not trust the value returned by hardware, check that it really fits in the message. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-11HID: logitech-hidpp: check name retrieval return codePeter Wu
hidpp_devicenametype_get_device_name() may return a negative value on protocol errors (for example, when the device is powered off). Explicitly check this condition to avoid a long-running loop. (0 cannot be returned as __name_length - index > 0, but check for it anyway as it would otherwise result in an infinite loop.) Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-11HID: logitech-hidpp: do not return the name lengthPeter Wu
We do not make any use of the actual name length get through hidpp_get_device_name(). Original patch by Benjamin Tissoires, this patch also replaces a (now) unnecessary goto by return NULL. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-11HID: wacom: Report input events for each finger on generic devicesJason Gerecke
The existing generic touch code only reports events after reading an entire HID report, which practically means that only data about the last contact in a report will ever be provided to userspace. This patch uses a trick from hid-multitouch.c to discover what type of field is at the end of each contact; when such a field is encountered all the stored contact data will be reported. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-10Merge tag 'pm+acpi-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "This time we have some more new material than we used to have during the last couple of development cycles. The most important part of it to me is the introduction of a unified interface for accessing device properties provided by platform firmware. It works with Device Trees and ACPI in a uniform way and drivers using it need not worry about where the properties come from as long as the platform firmware (either DT or ACPI) makes them available. It covers both devices and "bare" device node objects without struct device representation as that turns out to be necessary in some cases. This has been in the works for quite a few months (and development cycles) and has been approved by all of the relevant maintainers. On top of that, some drivers are switched over to the new interface (at25, leds-gpio, gpio_keys_polled) and some additional changes are made to the core GPIO subsystem to allow device drivers to manipulate GPIOs in the "canonical" way on platforms that provide GPIO information in their ACPI tables, but don't assign names to GPIO lines (in which case the driver needs to do that on the basis of what it knows about the device in question). That also has been approved by the GPIO core maintainers and the rfkill driver is now going to use it. Second is support for hardware P-states in the intel_pstate driver. It uses CPUID to detect whether or not the feature is supported by the processor in which case it will be enabled by default. However, it can be disabled entirely from the kernel command line if necessary. Next is support for a platform firmware interface based on ACPI operation regions used by the PMIC (Power Management Integrated Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms. That interface is used for manipulating power resources and for thermal management: sensor temperature reporting, trip point setting and so on. Also the ACPI core is now going to support the _DEP configuration information in a limited way. Basically, _DEP it supposed to reflect off-the-hierarchy dependencies between devices which may be very indirect, like when AML for one device accesses locations in an operation region handled by another device's driver (usually, the device depended on this way is a serial bus or GPIO controller). The support added this time is sufficient to make the ACPI battery driver work on Asus T100A, but it is general enough to be able to cover some other use cases in the future. Finally, we have a new cpufreq driver for the Loongson1B processor. In addition to the above, there are fixes and cleanups all over the place as usual and a traditional ACPICA update to a recent upstream release. As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver for Intel platforms should be able to handle power management of the DMA engine correctly, the cpufreq-dt driver should interact with the thermal subsystem in a better way and the ACPI backlight driver should handle some more corner cases, among other things. On top of the ACPICA update there are fixes for race conditions in the ACPICA's interrupt handling code which might lead to some random and strange looking failures on some systems. In the cleanups department the most visible part is the series of commits targeted at getting rid of the CONFIG_PM_RUNTIME configuration option. That was triggered by a discussion regarding the generic power domains code during which we realized that trying to support certain combinations of PM config options was painful and not really worth it, because nobody would use them in production anyway. For this reason, we decided to make CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and that lead to the conclusion that the latter became redundant and CONFIG_PM could be used instead of it. The material here makes that replacement in a major part of the tree, but there will be at least one more batch of that in the second part of the merge window. Specifics: - Support for retrieving device properties information from ACPI _DSD device configuration objects and a unified device properties interface for device drivers (and subsystems) on top of that. As stated above, this works with Device Trees and ACPI and allows device drivers to be written in a platform firmware (DT or ACPI) agnostic way. The at25, leds-gpio and gpio_keys_polled drivers are now going to use this new interface and the GPIO subsystem is additionally modified to allow device drivers to assign names to GPIO resources returned by ACPI _CRS objects (in case _DSD is not present or does not provide the expected data). The changes in this set are mostly from Mika Westerberg, Rafael J Wysocki, Aaron Lu, and Darren Hart with some fixes from others (Fabio Estevam, Geert Uytterhoeven). - Support for Hardware Managed Performance States (HWP) as described in Volume 3, section 14.4, of the Intel SDM in the intel_pstate driver. CPUID is used to detect whether or not the feature is supported by the processor. If supported, it will be enabled automatically unless the intel_pstate=no_hwp switch is present in the kernel command line. From Dirk Brandewie. - New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie). - Support for firmware interface based on ACPI operation regions used by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR platforms for power resource control and thermal management (Aaron Lu). - Limited support for retrieving off-the-hierarchy dependencies between devices from ACPI _DEP device configuration objects and deferred probing support for the ACPI battery driver based on the _DEP information to make that driver work on Asus T100A (Lan Tianyu). - New cpufreq driver for the Loongson1B processor (Kelvin Cheung). - ACPICA update to upstream revision 20141107 which only affects tools (Bob Moore). - Fixes for race conditions in the ACPICA's interrupt handling code and in the ACPI code related to system suspend and resume (Lv Zheng and Rafael J Wysocki). - ACPI core fix for an RCU-related issue in the ioremap() regions management code that slowed down significantly after CPUs had been allowed to enter idle states even if they'd had RCU callbakcs queued and triggered some problems in certain proprietary graphics driver (and elsewhere). The fix replaces synchronize_rcu() in that code with synchronize_rcu_expedited() which makes the issue go away. From Konstantin Khlebnikov. - ACPI LPSS (Low-Power Subsystem) driver fix to handle power management of the DMA engine included into the LPSS correctly. The problem is that the DMA engine doesn't have ACPI PM support of its own and it simply is turned off when the last LPSS device having ACPI PM support goes into D3cold. To work around that, the PM domain used by the ACPI LPSS driver is redesigned so at least one device with ACPI PM support will be on as long as the DMA engine is in use. From Andy Shevchenko. - ACPI backlight driver fix to avoid using it on "Win8-compatible" systems where it doesn't work and where it was used by default by mistake (Aaron Lu). - Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki, Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and Ashwin Chaugule (mostly related to the upcoming ARM64 support). - Intel RAPL (Running Average Power Limit) power capping driver fixes and improvements including new processor IDs (Jacob Pan). - Generic power domains modification to power up domains after attaching devices to them to meet the expectations of device drivers and bus types assuming devices to be accessible at probe time (Ulf Hansson). - Preliminary support for controlling device clocks from the generic power domains core code and modifications of the ARM/shmobile platform to use that feature (Ulf Hansson). - Assorted minor fixes and cleanups of the generic power domains core code (Ulf Hansson, Geert Uytterhoeven). - Assorted minor fixes and cleanups of the device clocks control code in the PM core (Geert Uytterhoeven, Grygorii Strashko). - Consolidation of device power management Kconfig options by making CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter which is now redundant (Rafael J Wysocki and Kevin Hilman). That is the first batch of the changes needed for this purpose. - Core device runtime power management support code cleanup related to the execution of callbacks (Andrzej Hajda). - cpuidle ARM support improvements (Lorenzo Pieralisi). - cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and a new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and Bartlomiej Zolnierkiewicz). - New cpufreq driver callback (->ready) to be executed when the cpufreq core is ready to use a given policy object and cpufreq-dt driver modification to use that callback for cooling device registration (Viresh Kumar). - cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu, James Geboski, Tomeu Vizoso). - Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate, cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao, Stefan Wahren, Petr Cvek). - OPP (Operating Performance Points) framework modification to allow OPPs to be removed too and update of a few cpufreq drivers (cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added during initialization) on driver removal (Viresh Kumar). - Hibernation core fixes and cleanups (Tina Ruchandani and Markus Elfring). - PM Kconfig fix related to CPU power management (Pankaj Dubey). - cpupower tool fix (Prarit Bhargava)" * tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (120 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tools: cpupower: fix return checks for sysfs_get_idlestate_count() drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM leds: leds-gpio: Fix multiple instances registration without 'label' property iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros ...
2014-12-10HID: wacom: Initialize MT slots for generic devices at post_parse_hidJason Gerecke
If a HID descriptor places HID_DG_CONTACTID before HID_DG_X and HID_DG_Y then the ABS_X and ABS_Y will not be automatically initialized by the call to input_mt_init_slots. To ensure that this is not a problem, we relocate that call to occur after HID parsing has been completed and we've initalized all the multitouch axes. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-08Merge tag 'mfd-for-linus-3.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to the core: - Honour PLATFORM_DEVID_NONE and PLATFORM_DEVID_AUTO dev IDs Changes to existing drivers: - IRQ additions/fixes; axp20x, da9063-core - Code simplification; i2c-dln2 - Regmap additions/fixes; max77693 - Error checking/handling improvements; dln2, db8500-prcmu - Bug fixes; dln2, wm8350-core - DT support/documentation; max77693, max77686, tps65217, twl4030-power, gpio-tc3589x - Decouple syscon interface from platform devices - Use MFD hotplug registration; rtsx_usb, viperboard, hid-sensor-hub - Regulator fixups; sec-core - Power Management additions/fixes; rts5227, tc6393xb - Remove relic/redundant code; ab8500-sysctrl, lpc_sch, max77693-private - Clean-up/coding style changes; tps65090 - Clk additions/fixes; tc6393xb, tc6387xb, t7l66xb - Add USB-SPI support; dln2 - Trivial changes; max14577, arizona-spi, lpc_sch, wm8997-tables, wm5102-tables wm5110-tables, axp20x, atmel-hlcdc, rtsx_pci New drivers/supported devices: - axp288 PMIC support added to axp20x - s2mps13 support added to sec-core - New support for Diolan DLN-2 - New support for atmel-hlcdc" * tag 'mfd-for-linus-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (55 commits) mfd: rtsx: Add func to split u32 into register mfd: atmel-hlcdc: Add Kconfig option description and name mfd: da9063: Get irq base dynamically before registering device mfd: max14577: Fix obvious typo in company name in copyright mfd: axp20x: Constify axp20x_acpi_match and rid unused warning mfd: t7l66xb: prepare/unprepare clocks mfd: tc6387xb: prepare/unprepare clocks mfd: dln2: add support for USB-SPI module mfd: wm5110: Add missing registers for AIF2 channels 3-6 mfd: tc3589x: get rid of static base mfd: arizona: Document HP_CTRL_1L and HP_CTRL_1R registers mfd: wm8997: Mark INTERRUPT_STATUS_2_MASK as readable mfd: tc6393xb: Prepare/unprepare clocks mfd: tps65090: Fix bonkers indenting strategy mfd: tc6393xb: Fail ohci suspend if full state restore is required mfd: lpc_sch: Don't call mfd_remove_devices() mfd: wm8350-core: Fix probable mask then right shift defect mfd: ab8500-sysctrl: Drop ab8500_restart mfd: db8500-prcmu: Provide sane error path values mfd: db8500-prcmu: Check return of devm_ioremap for error ...
2014-12-05HID: wacom: Update maximum X/Y accounding to outbound offsetPing Cheng
Defined outbound offset for DTU and Cintiq. But didn't update the relevant maximum values. Oops... Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-05HID: wacom: Add support for DTU-1031XPing Cheng
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-04i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM in drivers/hid/i2c-hid/i2c-hid.c. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-12-02HID: wacom: add defines for new Cintiq and DTU outbound trackingPing Cheng
There are screen to tablet offsets for newer Cintiq and DTU models. These offsets serve as outbound tracking for those display tablets. Use defines instead of hardcoded numbers for the offsets. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-02HID: wacom: fix freeze on open when autosuspend is onBenjamin Tissoires
Since the conversion from USB to HID (in v3.17), some people reported a freeze on boot with the wacom driver. Hans managed to get a stacktrace: [ 240.272331] Call Trace: [ 240.272338] [<ffffffff813de7b9>] ? usb_hcd_submit_urb+0xa9/0xb10 [ 240.272347] [<ffffffff81555579>] schedule+0x29/0x70 [ 240.272355] [<ffffffff815559e6>] schedule_preempt_disabled+0x16/0x20 [ 240.272363] [<ffffffff81557365>] __mutex_lock_slowpath+0xe5/0x230 [ 240.272372] [<ffffffff815574c7>] mutex_lock+0x17/0x30 [ 240.272380] [<ffffffffa063c1d2>] wacom_resume+0x22/0x50 [wacom] [ 240.272396] [<ffffffffa01aea8a>] hid_resume_common+0xba/0x110 [usbhid] [ 240.272404] [<ffffffff813e5890>] ? usb_runtime_suspend+0x80/0x80 [ 240.272417] [<ffffffffa01aeb1d>] hid_resume+0x3d/0x70 [usbhid] [ 240.272425] [<ffffffff813e44a6>] usb_resume_interface.isra.6+0xb6/0x120 [ 240.272432] [<ffffffff813e4774>] usb_resume_both+0x74/0x140 [ 240.272439] [<ffffffff813e58aa>] usb_runtime_resume+0x1a/0x20 [ 240.272446] [<ffffffff813b1912>] __rpm_callback+0x32/0x70 [ 240.272453] [<ffffffff813b1976>] rpm_callback+0x26/0xa0 [ 240.272460] [<ffffffff813b2d71>] rpm_resume+0x4b1/0x690 [ 240.272468] [<ffffffff812ab992>] ? radix_tree_lookup_slot+0x22/0x50 [ 240.272475] [<ffffffff813b2c1a>] rpm_resume+0x35a/0x690 [ 240.272482] [<ffffffff8116e9c9>] ? zone_statistics+0x89/0xa0 [ 240.272489] [<ffffffff813b2f90>] __pm_runtime_resume+0x40/0x60 [ 240.272497] [<ffffffff813e4272>] usb_autopm_get_interface+0x22/0x60 [ 240.272509] [<ffffffffa01ae8d9>] usbhid_open+0x59/0xe0 [usbhid] [ 240.272517] [<ffffffffa063ac85>] wacom_open+0x35/0x50 [wacom] [ 240.272525] [<ffffffff813f37b9>] input_open_device+0x79/0xa0 [ 240.272534] [<ffffffffa048d1c1>] evdev_open+0x1b1/0x200 [evdev] [ 240.272543] [<ffffffff811c899e>] chrdev_open+0xae/0x1f0 [ 240.272549] [<ffffffff811c88f0>] ? cdev_put+0x30/0x30 [ 240.272556] [<ffffffff811c17e2>] do_dentry_open+0x1d2/0x320 [ 240.272562] [<ffffffff811c1cd1>] finish_open+0x31/0x50 [ 240.272571] [<ffffffff811d2202>] do_last.isra.36+0x652/0xe50 [ 240.272579] [<ffffffff811d2ac7>] path_openat+0xc7/0x6f0 [ 240.272586] [<ffffffff811cf012>] ? final_putname+0x22/0x50 [ 240.272594] [<ffffffff811d42d2>] ? user_path_at_empty+0x72/0xd0 [ 240.272602] [<ffffffff811d43fd>] do_filp_open+0x4d/0xc0 [...] So here, wacom_open is called, and then wacom_resume is called by the PM system. However, wacom_open already took the lock when wacom_resume tries to get it. Freeze. A little bit of history shows that this already happened in the past - commit f6cd378372bf ("Input: wacom - fix runtime PM related deadlock"), and the solution was to call first the PM function before taking the lock. The lock was introduced in commit commit e722409445fb ("Input: wacom - implement suspend and autosuspend") when the autosuspend feature has been added. Given that usbhid already takes care of this very same locking between suspend/resume, I think we can simply kill the lock in open/close. The lock is now used also with LEDs, so we can not remove it completely. Reported-by: Hans Spath <inbox-546@hans-spath.de> Tested-by: Hans Spath <inbox-546@hans-spath.de> CC: stable@vger.kernel.org # v3.17+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-02HID: wacom: re-add accidentally dropped Lenovo PIDBenjamin Tissoires
Dropped in the following commit: commit a3e6f6543d19 ("Input: wacom - keep wacom_ids ordered") Reported-by: Hans Spath <inbox-546@hans-spath.de> CC: stable@vger.kernel.org # v3.17+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-01HID: make hid_report_len as a static inline function in hid.hMathieu Magnaudet
In several hid drivers it is necessary to calculate the length of an hid_report. This patch exports the existing static function hid_report_len of hid-core.c as an inline function in hid.h Signed-off-by: Mathieu Magnaudet <mathieu.magnaudet@enac.fr> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-27HID: wacom: Consult the application usage when determining field typeJason Gerecke
It is not necessarily sufficient to look only at the physical and logical usages when determining if a field is for the pen or touch. Some fields are not contained in a sub-collection and thus only have an application usage. Not checking the application usage in such cases causes us to ignore the field entirely, which may lead to incorrect behavior. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-26HID: wacom: PAD is independent with pen/touchPing Cheng
PAD can be on pen interface (Intuos Pro and Cintiq series) or touch interface (Bamboo PT and Intuos PT series) or its own interface (Bamboo pen-only and Intuos Pen M/S). We need to mark it independently. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-25HID: hid-sensor-hub: Use mfd_add_hotplug_devices() helperJohan Hovold
Use mfd_add_hotplug_devices() helper to register the subdevices. Compile-only tested. Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25HID: multitouch: Add quirk for VTL touch panelsMathieu Magnaudet
VTL panels do not switch to the multitouch mode until the input mode feature is read by the host. This should normally be done by usbhid, but it looks like an other bug prevents usbhid to properly retrieve the feature state. As a workaround, we force the reading of the feature in mt_set_input_mode for such devices. Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Mathieu Magnaudet <mathieu.magnaudet@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-25HID: i2c-hid: fix race condition reading reportsJean-Baptiste Maneyrol
Current driver uses a common buffer for reading reports either synchronously in i2c_hid_get_raw_report() and asynchronously in the interrupt handler. There is race condition if an interrupt arrives immediately after the report is received in i2c_hid_get_raw_report(); the common buffer is modified by the interrupt handler with the new report and then i2c_hid_get_raw_report() proceed using wrong data. Fix it by using a separate buffers for synchronous reports. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> [Antonio Borneo: cleanup, rebase to v3.17, submit mainline] Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-21HID: wacom: Add angular resolution data to some ABS axesJason Gerecke
Provide the resolution of several angular axes (tilt, pen rotation, puck rotation) to userspace. Because these values are natively degree-based, we need to convert them to into units/radian as required by the input_absinfo struct. To ensure wraparound behaves properly for the rotation axes, the converted value was rounded up rather than rounded nearest. Notably, the touchring axes (ABS_WHEEL and ABS_THROTTLE) are left without a a declared resolution because the their low resolution cannot be accurately represented (the worst-case rounding-induced error would be ~16 degrees). Pre-scaling the values and range by at least 10x would reduce the error in the resolution to acceptable levels, but the xf86-input-wacom driver is not able to use pre-scaled values for these axes at this time. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-21HID: wacom: Report ABS_TILT_{X,Y} as signed valuesJason Gerecke
Centers the ABS_TILT_{X,Y} axes so that a value of zero is reported when the pen is vertical. Combined with resolution information in the next patch, this makes it possible for userspace to calculate the pen angle without needing hardware-specific knowledge. The xf86-input-wacom driver was updated to support signed tilt values in late-2012 (2f2acec). Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-20HID: wacom - Bamboo pen-only tablet does not support PADPing Cheng
Bamboo models do not support HID_DG_CONTACTMAX. Plus, Bamboo pen-only has touch descriptor. This leads to some complications in the code. This patch also fixes duplicated PAD interfeaces for Intuos Pen models. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-20HID: wacom - Cleanup input_capabilities for Graphire 4 and Bamboo FunPing Cheng
Graphire 4 only has two tablet buttons; Bamboo Fun touch ring is only for PAD. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-20HID: wacom - return ENODEV for failed wacom_setup_pad_input_capabilitiesPing Cheng
ENODEV indicates no device is added. Hence, the associated pad input device is simply freed. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-20HID: sony: Add support for the third-party SMK PS3 Bluetooth RemoteFrank Praznik
Add vid/pid for the SMK branded third-party PS3 Bluetooth remote and enable support in the hid-sony driver. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-19HID: yet another buggy ELAN touchscreenOliver Neukum
The touchscreen needs the same quirk as the other models. Signed-off-by: Oliver Neukum <oneukum@suse.de> Reported-by: Bryan Poling <poli0048@umn.edu> CC: stable@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-19HID: sony: Use kernel allocated buffers for HID reportsFrank Praznik
Replace stack buffers with kernel allocated buffers for sending and receiving HID reports to prevent issues with DMA transfers on certain hardware. Output report buffers are allocated at initialization time to avoid excessive calls to kmalloc and kfree. Link: https://bugzilla.kernel.org/show_bug.cgi?id=87991 Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-18HID: i2c-hid: print the correct data in dbg msgJean-Baptiste Maneyrol
Report is received in "buffer"; fix the following i2c_hid_dbg() to dump data from the correct pointer. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> [Antonio Borneo: cleanup and rebase to v3.17] Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - fix for an oops in HID core upon repeated subdriver insertion/removal under certain circumstances, by Benjamin Tissoires - quirk for another Elan Touchscreen device, by Adel Gadllah * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: core: cleanup .claimed field on disconnect HID: usbhid: enable always-poll quirk for Elan Touchscreen 0103
2014-11-11HID: wacom: Add support for Intuos Pen MediumPing Cheng
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-11HID: lenovo: Don't set EV_REP to avoid repeating mice buttonsJamie Lentin
On the USB keyboard, the VENDOR hotkeys share the same device as the mouse. Setting EV_REP also affects mouse buttons, so leave it off. The bluetooth keyboard still has autorepeating mouse buttons, as it only has one device and is set by the KEYBOARD pages. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-11HID: lenovo: Move USB KEY_FILE to 0x00f9 to prevent scancode clashJamie Lentin
The bluetooth keyboard also generates 0x00fa when the middle button is pressed. Move the made-up report out of the way so we don't trigger KEY_FILE when middle button is pressed Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-11HID: add support for MS Surface Pro 3 Type CoverAlan Wu
Surface Pro 3 Type Cover that works with Ubuntu (and possibly Arch) from this thread. Both trackpad and keyboard work after compiling my own kernel. http://ubuntuforums.org/showthread.php?t=2231207&page=2&s=44910e0c56047e4f93dfd9fea58121ef Also includes Jarrad Whitaker's message which sources http://winaero.com/blog/how-to-install-linux-on-surface-pro-3/ which he says is sourced from a Russian site Signed-off-by: Alan Wu <alan.c.wu@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-07HID: wacom - make sure touch_input is valid before using itPing Cheng
touch_input is stored in wacom_shared for pen data to report touch switch status. It is possible, although we didn't see it happen on Linux yet, that pen data is procesed before touch interface is fully probed. As a by-product of this patch, it fixes the FreeBSD issue reported by Denis Akiyakov http://www.spinics.net/lists/linux-input/msg33971.html Reviewed-by: Hans Petter Selasky <hps@selasky.org> Tested-by: Denis Akiyakov <d.akiyakov@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-05HID: saitek: quirk for Saitek R.A.T.7 works with R.A.T.9 tooVille Aakko
I have tested HID quirk for Saitek R.A.T.7 with my R.A.T. 9. It works fine for me. Attached patch makes the necessary changes to use the quirk on the R.A.T.9 too, and necessary Kconfig changes too. I have stylized the Kconfig option name to include Mad Catz in the option name, as (at least some of) the devices are marketed under Mad Catz brand. Signed-off-by: Ville Aakko <ville.aakko@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-04HID: logitech-hidpp: 2 fixes in hidpp_root_get_protocol_version()Benjamin Tissoires
- remove the constant '1' - when the device is not connected, the protocol error HIDPP_ERROR_RESOURCE_ERROR is raised. We should not warn the user about it because it is somewhat expected as an answer when we check if the device is connected. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-04HID: logitech-hidpp: fix negated returnsBenjamin Tissoires
Reported by Dan Carpenter: drivers/hid/hid-logitech-hidpp.c:359 hidpp_root_get_protocol_version() warn: should this return really be negated? drivers/hid/hid-logitech-hidpp.c:398 hidpp_devicenametype_get_count() warn: should this return really be negated? drivers/hid/hid-logitech-hidpp.c:417 hidpp_devicenametype_get_device_name() warn: should this return really be negated? drivers/hid/hid-logitech-hidpp.c:524 hidpp_touchpad_get_raw_info() warn: should this return really be negated? The problem lies in hidpp_send_message_sync() which can return 2 types of errors depending of their sign. Adding a comment there to clarify what is happening. To solve that, print an error in case of a protocol problem, and raise -EPROTO instead. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-03HID: core: cleanup .claimed field on disconnectBenjamin Tissoires
When a subdriver is rmmod-ed then re-insmod-ed, the hid device is not destroyed as it is owned by the transport layer. So when we re-probed the device, the hid device is assumed to be already claimed, and can lead to page faults if hid-core tries to forward the emitted data to the to-be-created claimed node. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-03HID: usbhid: enable always-poll quirk for Elan Touchscreen 0103Adel Gadllah
Yet another device that needs this quirk. Reported-by: Tanguy de Baritault <tdebaritault@gmail.com> Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-03HID: logitech-hidpp: leaks and NULL dereferencesDan Carpenter
Shift the allocation down a few lines to avoid a memory leak and also add a check for allocation failure. Fixes: 2f31c5252910 ('HID: Introduce hidpp, a module to handle Logitech hid++ devices') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-03HID: plantronics: remove superfluous .probe()Jiri Kosina
Remove redundanct probe() callback, as it isn't doing anything extra that HID core wouldn't do by default. Reported-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-03HID: plantronics: fix errant mouse eventsJD Cole
This version of the driver prevents Telephony pages which are not mapped as Consumer Control applications AND are not on the Consumer Page from being registered by the hid-input driver. Signed-off-by: JD Cole <jd.cole@plantronics.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - workarounds for a couple of misbehaving Elan Touchscreens, by Adel Gadllah - fix for TransducerSerialNumber field implementation, by Jason Gerecke - a couple of new HID usages (added by HUT), by Olivier Gay * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: input: Fix TransducerSerialNumber implementation HID: add keyboard input assist hid usages HID: usbhid: enable always-poll quirk for Elan Touchscreen 016f HID: usbhid: enable always-poll quirk for Elan Touchscreen 009b