summaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)Author
2014-02-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID update from Jiri Kosina: - fixes for several bugs in incorrect allocations of buffers by David Herrmann and Benjamin Tissoires. - support for a few new device IDs by Archana Patni, Benjamin Tissoires, Huei-Horng Yo, Reyad Attiyat and Yufeng Shen * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hyperv: make sure input buffer is big enough HID: Bluetooth: hidp: make sure input buffers are big enough HID: hid-sensor-hub: quirk for STM Sensor hub HID: apple: add Apple wireless keyboard 2011 JIS model support HID: fix buffer allocations HID: multitouch: add FocalTech FTxxxx support HID: microsoft: Add ID's for Surface Type/Touch Cover 2 HID: usbhid: quirk for CY-TM75 75 inch Touch Overlay
2014-02-17HID: hyperv: make sure input buffer is big enoughDavid Herrmann
We need at least HID_MAX_BUFFER_SIZE (4096) bytes as input buffer. HID core depends on this as it requires every input report to be at least as big as advertised. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-17HID: hid-sensor-hub: quirk for STM Sensor hubArchana Patni
Added STM sensor hub vendor id in HID_SENSOR_HUB_ENUM_QUIRK to fix report descriptors. These devices uses old FW which uses logical 0 as minimum. In these, HID reports are not using proper collection classes. So we need to fix report descriptors,for such devices. This will not have any impact, if the FW uses logical 1 as minimum. We look for usage id for "power and report state", and modify logical minimum value to 1. This is a follow-up patch to commit id 875e36f8. Signed-off-by: Archana Patni <archana.patni@linux.intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-06HID: apple: add Apple wireless keyboard 2011 JIS model supportHuei-Horng Yo
Add Apple wireless keyboard 2011 JIS model (05ac:0257). Signed-off-by: Huei-Horng Yo <hiroshi@ghostsinthelab.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-03HID: fix buffer allocationsBenjamin Tissoires
When using hid_output_report(), the buffer should be allocated by hid_alloc_report_buf(), not a custom malloc. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-31Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - a new jpeg codec driver for Samsung Exynos (jpeg-hw-exynos4) - a new dvb frontend for ds2103 chipset (m88ds2103) - a new sensor driver for Samsung S5K5BAF UXGA (s5k5baf) - new drivers for R-Car VSP1 - a new radio driver: radio-raremono - a new tuner driver for ts2022 chipset (m88ts2022) - the analog part of em28xx is now a separate module that only load/runs if the device is not a pure digital TV device - added a staging driver for bcm2048 radio devices - the omap 2 video driver (omap24xx) was moved to staging. This driver is for an old hardware and uses a deprecated Kernel internal API. If nobody cares enough to fix it, it would be removed on a couple Kernel releases - the sn9c102 driver was moved to staging. This driver was replaced by gspca, and disabled on some distros, as almost all devices are known to work properly with gspca. It should be removed from kernel on a couple Kernel releases - lots of driver fixes, improvements and cleanups * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (421 commits) [media] media: v4l2-dev: fix video device index assignment [media] rc-core: reuse device numbers [media] em28xx-cards: properly initialize the device bitmap [media] Staging: media: Fix line length exceeding 80 characters in as102_drv.c [media] Staging: media: Fix line length exceeding 80 characters in as102_fe.c [media] Staging: media: Fix quoted string split across line in as102_fe.c [media] media: st-rc: Add reset support [media] m2m-deinterlace: fix allocated struct type [media] radio-usb-si4713: fix sparse non static symbol warnings [media] em28xx-audio: remove needless check before usb_free_coherent() [media] au0828: Fix sparse non static symbol warning Revert "[media] go7007-usb: only use go->dev after allocated" [media] em28xx-audio: provide an error code when URB submit fails [media] em28xx: fix check for audio only usb interfaces when changing the usb alternate setting [media] em28xx: fix usb alternate setting for analog and digital video endpoints > 0 [media] em28xx: make 'em28xx_ctrl_ops' static em28xx-alsa: Fix error patch for init/fini [media] em28xx-audio: flush work at .fini [media] drxk: remove the option to load firmware asynchronously [media] em28xx: adjust period size at runtime ...
2014-01-28HID: multitouch: add FocalTech FTxxxx supportBenjamin Tissoires
This is a Win7 device which does not work correctly with the default settings (not the previous default BT). However, the quirk ALWAYS_TRUE makes it working like a charm. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-28HID: microsoft: Add ID's for Surface Type/Touch Cover 2Reyad Attiyat
The Microsoft Surface Type/Touch cover 2 devices have the flag HID_DG_CONTACTID in their reports.This causes the device to bind to the hid-multitouch driver, which doesn't handle generic keyboard/mouse input events. The patch adds the hardware id's of the device to hid-microsoft and to the HID special driver array, which makes the device get handled by hid-generic/hid-input properly. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=64811 Singed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> Reviewed-by: Benjamin Tissoires<benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-28HID: usbhid: quirk for CY-TM75 75 inch Touch OverlayYufeng Shen
There is timeout error during initialization: kernel: [ 11.733104] hid-multitouch 0003:1870:0110.0001: usb_submit_urb(ctrl) failed: -1 kernel: [ 11.734093] hid-multitouch 0003:1870:0110.0001: timeout initializing reports Adding quirk HID_QUIRK_NO_INIT_REPORTS can solve the problem. Signed-off-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-24Merge tag 'pm+acpi-3.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "As far as the number of commits goes, the top spot belongs to ACPI this time with cpufreq in the second position and a handful of PM core, PNP and cpuidle updates. They are fixes and cleanups mostly, as usual, with a couple of new features in the mix. The most visible change is probably that we will create struct acpi_device objects (visible in sysfs) for all devices represented in the ACPI tables regardless of their status and there will be a new sysfs attribute under those objects allowing user space to check that status via _STA. Consequently, ACPI device eject or generally hot-removal will not delete those objects, unless the table containing the corresponding namespace nodes is unloaded, which is extremely rare. Also ACPI container hotplug will be handled quite a bit differently and cpufreq will support CPU boost ("turbo") generically and not only in the acpi-cpufreq driver. Specifics: - ACPI core changes to make it create a struct acpi_device object for every device represented in the ACPI tables during all namespace scans regardless of the current status of that device. In accordance with this, ACPI hotplug operations will not delete those objects, unless the underlying ACPI tables go away. - On top of the above, new sysfs attribute for ACPI device objects allowing user space to check device status by triggering the execution of _STA for its ACPI object. From Srinivas Pandruvada. - ACPI core hotplug changes reducing code duplication, integrating the PCI root hotplug with the core and reworking container hotplug. - ACPI core simplifications making it use ACPI_COMPANION() in the code "glueing" ACPI device objects to "physical" devices. - ACPICA update to upstream version 20131218. This adds support for the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug facilities. From Bob Moore, Lv Zheng and Betty Dall. - Init code change to carry out the early ACPI initialization earlier. That should allow us to use ACPI during the timekeeping initialization and possibly to simplify the EFI initialization too. From Chun-Yi Lee. - Clenups of the inclusions of ACPI headers in many places all over from Lv Zheng and Rashika Kheria (work in progress). - New helper for ACPI _DSM execution and rework of the code in drivers that uses _DSM to execute it via the new helper. From Jiang Liu. - New Win8 OSI blacklist entries from Takashi Iwai. - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria, Tang Chen, Zhang Rui. - intel_pstate driver updates, including proper Baytrail support, from Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra. - Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski. - powernow-k6 cpufreq driver fixes from Mikulas Patocka. - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown. - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar. - cpuidle cleanups from Bartlomiej Zolnierkiewicz. - Support for hibernation APM events from Bin Shi. - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled during thaw transitions from Bjørn Mork. - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson. - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa, Rashika Kheria. - New tool for profiling system suspend from Todd E Brandt and a cpupower tool cleanup from One Thousand Gnomes" * tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits) thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412) cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ Documentation: cpufreq / boost: Update BOOST documentation cpufreq: exynos: Extend Exynos cpufreq driver to support boost cpufreq / boost: Kconfig: Support for software-managed BOOST acpi-cpufreq: Adjust the code to use the common boost attribute cpufreq: Add boost frequency support in core intel_pstate: Add trace point to report internal state. cpufreq: introduce cpufreq_generic_get() routine ARM: SA1100: Create dummy clk_get_rate() to avoid build failures cpufreq: stats: create sysfs entries when cpufreq_stats is a module cpufreq: stats: free table and remove sysfs entry in a single routine cpufreq: stats: remove hotplug notifiers cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly cpufreq: speedstep: remove unused speedstep_get_state platform: introduce OF style 'modalias' support for platform bus PM / tools: new tool for suspend/resume performance optimization ACPI: fix module autoloading for ACPI enumerated devices ACPI: add module autoloading support for ACPI enumerated devices ACPI: fix create_modalias() return value handling ...
2014-01-22Merge branches 'for-3.13/upstream-fixes', 'for-3.14/i2c-hid', ↵Jiri Kosina
'for-3.14/sensor-hub', 'for-3.14/sony' and 'for-3.14/upstream' into for-linus
2014-01-21HID: sony: Use colors for the Dualshock 4 LED namesFrank Praznik
Use the naming scheme 'devicename:colour' for the Dualshock 4 LED lightbar controls as specified in Documentation/leds/leds-class.txt Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-21HID: sony: Add annotated HID descriptor for the Dualshock 4Frank Praznik
Add annotated HID descriptor for the Dualshock 4. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-20HID: sony: Cache the output report for the Dualshock 4Frank Praznik
Retrieve and cache the output report for the Dualshock 4 in sony_probe() instead of repeatedly walking the report list in the worker function. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-17HID: sony: Map gyroscopes and accelerometers to axesFrank Praznik
Use a modified HID descriptor for the Dualshock 4 to assign the gyroscope sensors and accelerometers to axes. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-17HID: sony: Fix spacing in the device definitions.Frank Praznik
Fix cosmetic spacing in the device definitions. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-17HID: sony: Use standard output reports instead of raw reports to send data ↵Frank Praznik
to the Dualshock 4. Use regular HID output reports instead of raw reports in the dualshock4_state_worker function. (Thanks Simon Mungewell) Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-17HID: sony: Use separate identifiers for USB and Bluetooth connected ↵Frank Praznik
Dualshock 4 controllers. Use separate identifiers for Dualshock 4 controllers connected via USB and Bluetooth. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-16HID: hid-holtek-mouse: add new a070 mouseKharlamov Alexey
Added support of RITMIX ROM-316 mouse to hid-holtek-mouse workaround module Signed-off-by: Alexey Kharlamov <derlafff@ya.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-16HID: hid-sensor-hub: Fix buggy report descriptorsSrinivas Pandruvada
This addresses regression caused by commit id "751d17e23a9f7" iio: hid-sensors: Fix power and report state. This commit removed a quirk, to change the enumeration base to 1 from 0 based on an CONFIG paramter. There was objection to add more changes under this quirk, instead suggested to add an HID quirk. But there is no easy way to add HID qurik as the reports are not properly using collection class. The solution was to use logical minimum, which is a correct way. There were changes done in firmware to address this. Unfortunately some devices, still use old FW and can't be upgraded to newer version on Linux devices as there is no FW upgrade tool available for Linux devices. So we need to fix report descriptors, for such devices. This will not have any impact, if the FW uses logical 1 as minimum. In this patch we look for usage id for "power and report state", and modify logical minimum value to 1. Background on enum: In the original HID sensor hub firmwares all Named array enums were to 0-based. But the most recent hub implemented as 1-based, because of the implementation by one of the major OS vendor. Using logical minimum for the field as the base of enum. So we add logical minimum to the selector values before setting those fields. Some sensor hub FWs already changed logical minimum from 0 to 1 to reflect this and hope every other vendor will follow. There is no easy way to add a common HID quirk for NAry elements, even if the standard specifies these field as NAry, the collection used to describe selectors is still just "logical". Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-16HID: logitech-dj: Fix USB 3.0 issueBenjamin Tisssoires
This fix (not very clean though) should fix the long time USB3 issue that was spotted last year. The rational has been given by Hans de Goede: ---- I think the most likely cause for this is a firmware bug in the unifying receiver, likely a race condition. The most prominent difference between having a USB-2 device plugged into an EHCI (so USB-2 only) port versus an XHCI port will be inter packet timing. Specifically if you send packets (ie hid reports) one at a time, then with the EHCI controller their will be a significant pause between them, where with XHCI they will be very close together in time. The reason for this is the difference in EHCI / XHCI controller OS <-> driver interfaces. For non periodic endpoints (control, bulk) the EHCI uses a circular linked-list of commands in dma-memory, which it follows to execute commands, if the list is empty, it will go into an idle state and re-check periodically. The XHCI uses a ring of commands per endpoint, and if the OS places anything new on the ring it will do an ioport write, waking up the XHCI making it send the new packet immediately. For periodic transfers (isoc, interrupt) the delay between packets when sending one at a time (rather then queuing them up) will be even larger, because they need to be inserted into the EHCI schedule 2 ms in the future so the OS driver can be sure that the EHCI driver does not try to start executing the time slot in question before the insertion has completed. So a possible fix may be to insert a delay between packets being send to the receiver. ---- I tested this on a buggy Haswell USB 3.0 motherboard, and I always get the notification after adding the msleep. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-16HID: sony: Rename worker functionFrank Praznik
Rename sony_state_worker to sixaxis_state_worker since the function is now sixaxis specific. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-16HID: sony: Add LED controls for the Dualshock 4Frank Praznik
Add LED lightbar controls for the Dualshock 4. The Dualshock 4 light bar has 3 separate RGB LEDs that can range in brightness from 0 to 255 so a full byte is now needed to store each LED's state Changed the module to support an arbitrary number of LEDs instead of being hardcoded to 4. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-16HID: sony: Add force-feedback support for the Dualshock 4Frank Praznik
Adds the Dualshock 4 to the HID device list and enables force-feedback. Adds a Dualshock 4 specific worker function since the Dualshock 4 needs a different report than the Sixaxis. The right motor in the Dualshock 4 is variable so the full rumble value is now passed to the worker function and clamped there if necessary. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-06HID: hidraw: make comment more accurate and nicerJiri Kosina
Reformat and reword some of the comments to make them more understandable. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-05ACPI / i2c-hid: replace open-coded _DSM code with helper functionsJiang Liu
Use helper functions to simplify _DSM related code in i2c-hid driver. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-02HID: sony: fix error return codeJulia Lawall
Currently the return variable ret is always 0. Set it to other values in error cases, as used in the direct return. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-20HID: input: fix input sysfs path for hid devicesBenjamin Tissoires
we used to set the parent of the input device as the parent of the hid bus. This was introduced when we created hid as a real bus, and to keep backward compatibility. Now, it's time to proper set the parent so that sysfs has an idea of which input device is attached to which hid device. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-18[media] si4713: HID blacklist Si4713 USB development boardDinesh Ram
The Si4713 development board contains a Si4713 FM transmitter chip and is handled by the radio-usb-si4713 driver. The board reports itself as (10c4:8244) Cygnal Integrated Products, Inc. and misidentifies itself as a HID device in its USB interface descriptor. This patch ignores this device as an HID device and hence loads the custom driver. Signed-off-by: Dinesh Ram <dinesh.ram@cern.ch> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-17HID: debug: add labels for some new buttonsAntonio Ospite
Add labels for BTN_DPAD_UP, BTN_DPAD_DOWN, BTN_DPAD_LEFT, BTN_DPAD_RIGHT and BTN_TOOL_QUADTAP. [jkosina@suse.cz: make changelog more verbose] Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-16HID: remove SIS entries from hid_have_special_driver[]Jiri Kosina
The entries are not needed, as hid-multitouch gets bound correctly automatically by contact ID. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-15HID: microsoft: no fallthrough in MS ergonomy 0xff05 usageJiri Kosina
For 0xff05 usage in MS ergonomy keyboard quirk, we are falling through and returning 0 instread of properly (because we've performed new mapping) returning 1. Fix that. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - Genius Gx Imperator Keyboard regression fix (missing break in case), by Ben Hutchings - duplicate sysfs entry error fix for hid-sensor-hub driver, by Srinivas Pandruvada * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hid-sensor-hub: fix duplicate sysfs entry error HID: kye: Fix missing break in kye_report_fixup()
2013-12-13HID: add support for SiS multitouch panel in the touch monitor LG 23ET83VEmanuel Krenz
[jkosina@suse.cz: refresh to apply after SIS quirk merging] Signed-off-by: Emanuel Krenz <emanuelkrenz@web.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-09HID: hid-sensor-hub: fix duplicate sysfs entry errorSrinivas Pandruvada
Fix kernel warning and failure to register sensor hub devices with MFD. Now many devices has in-built sensor hubs. So by default this HID hub, is properly parsed and register individual sensors as platform device using MFD framework. But if a second sensor hub is attached via USB, which has same sensors, it will result in kernel warning and failure to register MFD cell as the platform device sysfs file name will be same as created by in-built sensor hubs. This patch sets MFD cell id to PLATFORM_DEVID_AUTO. In this way there will never be duplicate sysfs file names. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-03Merge tag 'iio-fixes-for-3.13b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Second round of IIO fixes for the 3.13 cycle. 2 fixes here. * The gp2ap020a00f is a simple missing kconfig dependency. * The hid sensors hub fix is a work around for an issue introduced by hardware changes due to a certain large software vendor having an 'interesting' interpretation of the specification and hence indexing some arrays from 1 rather than 0. The fix takes advantage of the logical min and max reading facilities introduced by the precursor patch to figure out whether we have a 0 indexed or 1 indexed device and to adjust appropriately. It also drops a previous kconfig option that allowed this issue to be worked around at build time.
2013-12-03HID: logitech-dj: add HIDRAW dependency in KconfigOlivier Gay
hid-logitech-dj.c driver needs hidraw to work correctly. Without hidraw, hid-logitech-dj.c fails during probe() and Logitech Unifying devices HID reports aren't recognized. The unifying receiver has 3 usb interfaces. When hid-logitech-dj driver is loaded, interfaces 0 and 1 are discarded. Interface 2 consists of a hid class interface with 3 collections, each of which sports the 'vendor' usage, thus, there is no reason for hid_input to claim any of them. On the other hand, hidraw has no issue in claiming the collections, even if they are 'vendor'. As of today, hid-logitech-dj uses hidraw api to send configuration/control reports to interface 2 of the Unifying receiver. Without the hid-logitech-dj driver, interfaces 0 and 1 are claimed by hid-input, as they correspond to a keyboard and a mouse. But that is not relevant to the discussion. [jkosina@suse.cz: make the changelog more verbose, thanks to Nestor] Signed-off-by: Olivier Gay <ogay@logitech.com> Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com> Signed-off-by: Mathieu Meisser <mmeisser@logitech.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-02HID: add support for Logitech Dual Action gamepadsVitaly Katraew
I have two Logitech Dual Action gamepads, both have same Vendor/Device id pair. Newest gamepad (A) can switch between old mode (HID) and XBox gamepad emulation mode. Old gamepad (B) can only work in HID mode. In HID mode gamepad A sends many EPIPE errors during initialization and was disconnected immediately after connect to usb port. It works fine in Win and Mac. After adding NOGET quirk in driver, it was working properly. Gamepad B works fine before and after changes. I tested both gamepads with 3.8.0 and 3.11.6 kernels with modified driver. Follow patch can apply for current git kernel version. I can send pcap log from usb bus with both gamepads or any other additional information if it is needed Signed-off-by: Vitaly Katraew <zawullon@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-02HID: hid-sensor-hub: Add logical min and maxSrinivas Pandruvada
Exporting logical minimum and maximum of HID fields as part of the hid sensor attribute info. This can be used for range checking and to calculate enumeration base for NAry fields of HID sensor hub. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-12-02HID: usbhid: fix sis quirkWanlong Gao
Since commit 765e5fbd merged the sis quirk, then USB_VENDOR_ID_SIS2_TOUCH remains undefined. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-02HID: kye: Fix missing break in kye_report_fixup()Ben Hutchings
The change to support Genius Manticore Keyboard also changed behaviour for Genius Gx Imperator Keyboard, as there is no break between the cases. This is presumably a mistake. Reported by Coverity as CID 1134029. Fixes: 4a2c94c9b6c0 ('HID: kye: Add report fixup for Genius Manticore Keyboard') Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-02HID: usbhid: quirk for Synaptics Quad HD touchscreenAceLan Kao
Add Synaptics HD touchscreen(06cb:1ac3) to no init report quirk Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-02HID: usbhid: quirk for Synaptics HD touchscreenAceLan Kao
Add Synaptics HD touchscreen(06cb:0ac3) to no init report quirk. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-02HID: usbhid: merge the sis quirkAceLan Kao
USB_VENDOR_ID_SIS and USB_VENDOR_ID_SIS2_TOUCH are identical, so refine the code and merge the quirks. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-11-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - fix compat ioctl leak in uhid, by David Herrmann - fix scheduling in atomic context (causing actual lockups in real world) in hid-sony driver, by Sven Eckelmann - revert patch introducing VID/PID conflict, by Jiri Kosina - support from various new device IDs by Benjamin Tissoires and KaiChung Cheng * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: uhid: fix leak for 64/32 UHID_CREATE HID: kye: fix unresponsive keyboard HID: kye: Add report fixup for Genius Manticore Keyboard HID: multicouh: add PID VID to support 1 new Wistron optical touch device HID: appleir: force input to be set Revert "HID: wiimote: add LEGO-wiimote VID" HID: sony: Send FF commands in non-atomic context
2013-11-27HID: uhid: fix leak for 64/32 UHID_CREATEDavid Herrmann
UHID allows short writes so user-space can omit unused fields. We automatically set them to 0 in the kernel. However, the 64/32 bit compat-handler didn't do that in the UHID_CREATE fallback. This will reveal random kernel heap data (of random size, even) to user-space. Fixes: befde0226a59 ('HID: uhid: make creating devices work on 64/32 systems') Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-11-25HID: i2c-hid: disable interrupt on suspendMika Westerberg
When an I2C HID device is powered of during system sleep, as a result of removing its power resources (by the ACPI core) the interrupt line might go low as well. This results inadvertent interrupt and wakes the system from sleep immediately. To prevent this we disable the device interrupt in the drivers suspend method and enable it on resume. The device can still wake the system up if it is wake capable (this also means that not all of its power will be removed to keep the interrupt line high). Reported-by: Jerome Blin <jerome.blin@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-11-21HID: kye: fix unresponsive keyboardBenjamin Tissoires
The manticore keyboard requires that all usb EP are opened at least once to be fully functional. The third EP forwards to the user space some vendor specific information about the keyboard state, but are useless currently for the kernel. Opening them and closing them makes the keyboard responsive again. Reported-and-tested-by: Adam Kulagowski <fidor@fidor.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-11-21HID: kye: Add report fixup for Genius Manticore KeyboardBenjamin Tissoires
Genius Manticore Keyboard presents the same problem in its report descriptors than Genius Gila Gaming Mouse and Genius Imperator Keyboard. Use the same fixup. Reported-and-tested-by: Adam Kulagowski <fidor@fidor.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-11-21HID: multicouh: add PID VID to support 1 new Wistron optical touch deviceKaiChung Cheng
This patch adds PID VID to support for the Wistron Inc. Optical touch panel. Signed-off-by: KaiChung Cheng <kenny_cheng@wistron.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>