summaryrefslogtreecommitdiff
path: root/drivers/hid/usbhid
AgeCommit message (Collapse)Author
2016-03-10HID: usbhid: enable NO_INIT_REPORTS quirk for Semico USB Keykoard2Daniel Bristot de Oliveira
The device which identifies itself as a "USB Keykoard" (no typo) with VID:PID 1a2c:0027 does not seem to be handling the reports initialization very well. This results in a "usb_submit_urb(ctrl) failed: -1" message from the kernel when connected, and a delay before its initialization. It can also cause the hang the system. This patch adds the quirk for this device, which causes the delay to disappear. It is named as "USB Keykoard2" because the "USB Keykoard" already exists. Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-01-29HID: quirks: Add no_init_reports for AKAI midi controllerStafford Horne
The midi controller times-out while initializing reports, this causes boot to take an extra 10 seconds. The device descriptor advertises that it has an internal HID device but seems to not actually do anything useful. Signed-off-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-01-21HID: add HID_QUIRK_NOGET to Quanta 3003 tooBenjamin Tissoires
dmesg shows a lot of: [ 1374.890348] hid-multitouch 0003:0408:3003.0007: usb_submit_urb(ctrl) failed: -1 [ 1384.916388] hid-multitouch 0003:0408:3003.0007: usb_submit_urb(ctrl) failed: -1 [ 1384.916432] hid-multitouch 0003:0408:3003.0007: timeout initializing reports Add the quirk and make the touchscreen happy. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Jim lovell <jimlovell777@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-01-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - appoint Benjamin Tissoires as co-maintainer / designated reviewer - sysfs report_descriptor visibility fix for unclaimed devices, from Andy Lutomirski - suspend/resume fixes for Sony driver from Frank Praznik - IRQ deadlock fix from Ioan-Adrian Ratiu - hid-i2c fixes affecting (at least) Yoga 900 from Mika Westerberg and Srinivas Pandruvada - a lot of new device support (especially, but not limited to, Wacom) and assorted small misc fixes - almost complete G920 support; the only bit that is missing is switching the device to HID mode automatically; Simon Wood and Michal Maly are working on it. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (46 commits) Revert "INPUT: xpad: switch Logitech G920 Wheel into HID mode" HID: sensor-hub: Add quirk for Lenovo Yoga 900 with ITE Chips HID: Add new PID for Microchip Pick16F1454 HID: wacom: Use correct report to query pen ID from INTUOSHT2 devices HID: i2c-hid: Prevent sending reports from racing with device reset HID: use kobj_to_dev() HID: wiimote: use dev_to_wii() HID: add a new helper to_hid_driver() HID: use to_hid_device() HID: move to_hid_device() to hid.h HID: usbhid: use to_usb_device HID: corsair: Convert to use module_hid_driver HID: input: ignore the battery in OKLICK Laser BTmouse HID: wacom: Fix pad button range for CINTIQ_COMPANION_2 HID: wacom: Fix touchring value reporting HID: wacom: Report 'strip2' values in ABS_RY HID: wacom: Limit touchstrip data to 13 bits HID: wacom: bitwise vs logical ORs HID: wacom: Apply lowres quirk to BAMBOO_TOUCH devices HID: enable hid device to suspend/resume asynchronously ...
2016-01-14Merge branches 'for-4.4/upstream-fixes', 'for-4.5/async-suspend', ↵Jiri Kosina
'for-4.5/container-of-cleanups', 'for-4.5/core', 'for-4.5/i2c-hid', 'for-4.5/logitech', 'for-4.5/multitouch', 'for-4.5/sony', 'for-4.5/upstream' and 'for-4.5/wacom' into for-linus
2015-12-28HID: usbhid: use to_usb_deviceGeliang Tang
Use to_usb_device() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-13Merge tag 'usb-4.4-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver fixes from Greg KH: "Here are a number of small USB fixes for 4.4-rc5. All of them have been in linux-next. The majority are gadget and phy issues, with a few new quirks and device ids added as well" * tag 'usb-4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (32 commits) USB: add quirk for devices with broken LPM xhci: fix usb2 resume timing and races. usb: musb: fail with error when no DMA controller set usb: gadget: uvc: fix permissions of configfs attributes usb: musb: core: Fix pm runtime for deferred probe usb: phy: msm: fix a possible NULL dereference USB: host: ohci-at91: fix a crash in ohci_hcd_at91_overcurrent_irq usb: Quiet down false peer failure messages usb: xhci: fix config fail of FS hub behind a HS hub with MTT xhci: Fix memory leak in xhci_pme_acpi_rtd3_enable() usb: Use the USB_SS_MULT() macro to decode burst multiplier for log message USB: whci-hcd: add check for dma mapping error usb: core : hub: Fix BOS 'NULL pointer' kernel panic USB: quirks: Apply ALWAYS_POLL to all ELAN devices usb-storage: Fix scsi-sd failure "Invalid field in cdb" for USB adapter JMicron USB: quirks: Fix another ELAN touchscreen usb: dwc3: gadget: don't prestart interrupt endpoints USB: serial: Another Infineon flash loader USB ID USB: cdc_acm: Ignore Infineon Flash Loader utility USB: cp210x: Remove CP2110 ID from compatibility list ...
2015-12-01USB: quirks: Apply ALWAYS_POLL to all ELAN devicesAdrien Vergé
All ELAN hid devices seem to require the ALWAYS_POLL quirk. Let's use this quirk for all devices from this vendor, rather than maintaining a list of all its known product IDs. Tested-by: Adrien Vergé <adrienverge@gmail.com> Signed-off-by: Adrien Vergé <adrienverge@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-01HID: usbhid: fix recursive deadlockIoan-Adrian Ratiu
The critical section protected by usbhid->lock in hid_ctrl() is too big and because of this it causes a recursive deadlock. "Too big" means the case statement and the call to hid_input_report() do not need to be protected by the spinlock (no URB operations are done inside them). The deadlock happens because in certain rare cases drivers try to grab the lock while handling the ctrl irq which grabs the lock before them as described above. For example newer wacom tablets like 056a:033c try to reschedule proximity reads from wacom_intuos_schedule_prox_event() calling hid_hw_request() -> usbhid_request() -> usbhid_submit_report() which tries to grab the usbhid lock already held by hid_ctrl(). There are two ways to get out of this deadlock: 1. Make the drivers work "around" the ctrl critical region, in the wacom case for ex. by delaying the scheduling of the proximity read request itself to a workqueue. 2. Shrink the critical region so the usbhid lock protects only the instructions which modify usbhid state, calling hid_input_report() with the spinlock unlocked, allowing the device driver to grab the lock first, finish and then grab the lock afterwards in hid_ctrl(). This patch implements the 2nd solution. Signed-off-by: Ioan-Adrian Ratiu <adi@adirat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-23HID: usbhid: discarded events don't abort idlenessOliver Neukum
If an event is discarded the device stays idle. Just reverse the order of check and marking busy. Found by code inspection. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-20HID: usbhid: add Logitech G710+ keyboard quirk NOGETJimmy Berry
Without quirk keyboard repeats '6' until volume control is used since it indicates the key is pressed without ever releasing. Signed-off-by: Jimmy Berry <jimmy@boombatower.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-06Merge branches 'for-4.3/upstream-fixes', 'for-4.4/corsair', ↵Jiri Kosina
'for-4.4/dragonrise', 'for-4.4/i2c-hid', 'for-4.4/logitech', 'for-4.4/microsoft', 'for-4.4/multitouch', 'for-4.4/roccat-sysfs-deprecation', 'for-4.4/upstream' and 'for-4.4/wacom' into for-linus
2015-10-04HID: usbhid: Fix for the WiiU adapter from MayflashOliver Schmitt
The WiiU adapter from Mayflash (see http://www.mayflash.com/Products/NINTENDOWiiU/W009.html) is not working correctly. The "XInput" mode works fine, the controller is recognized as a xbox controller. But it is only possible to connect one controller with this method. In "DInput" mode the device is recognized as some kind of mouse input but no joystick is created. This commit will change this behavior with HID_QUIRK_MULTI_INPUT to split the device into 4 input devices so that it will also create joysticks in /dev/input/js*. Signed-off-by: Oliver Schmitt <voltumna@gmx.net> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-23HID: Add new Microsoft Type Cover 3 product IDDonavan Lance
Adds support for Microsoft Type Cover 3 with 0x07e2 product ID. Signed-off-by: Donavan Lance <shvr@fedoraproject.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-01Merge branch 'for-4.3/microsoft' into for-linusJiri Kosina
Conflicts: drivers/hid/usbhid/hid-quirks.c
2015-09-01Merge branches 'for-4.2/upstream-fixes-devm-fixed' and 'for-4.3/upstream' ↵Jiri Kosina
into for-linus
2015-08-24HID: quirks: add QUIRK_NOGET for an other TPV touchscreenBenjamin Tissoires
Looks like 0x8882 needs the same quirk than 0x8883. Given that both devices claim they are "TPV OpticalTouchScreen" rename the 0x8883 to add its PID in the #define. Reported-by: Blaine Lee <blaine.j.lee@medtronic.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-18HID: usbhid: Fix the check for HID_RESET_PENDING in hid_io_errorDon Zickus
It was reported that after 10-20 reboots, a usb keyboard plugged into a docking station would not work unless it was replugged in. Using usbmon, it turns out the interrupt URBs were streaming with callback errors of -71 for some reason. The hid-core.c::hid_io_error was supposed to retry and then reset, but the reset wasn't really happening. The check for HID_NO_BANDWIDTH was inverted. Fix was simple. Tested by reporter and locally by me by unplugging a keyboard halfway until I could recreate a stream of errors but no disconnect. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-07-24HID: microsoft: Add Surface 3 type coverStephen Just
Adding support for the Microsoft Surface 3 (non-pro) Type Cover. The existing definitions and quirks are actually for the Surface Pro 3 type covers. I've renamed the old constants to reflect that they belong to the Surface Pro 3, and added a new constant and matching code for the Surface 3. Signed-off-by: Stephen Just <stephenjust@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-07-08HID: usbhid: no flushing if device is already polledOliver Neukum
During open() it is unnecessary to wait for the device to flush stale inputs if the device is polled while closed due to a quirk or opening fails. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-06-29HID: microsoft: Add quirk for MS Surface Type/Touch coverReyad Attiyat
The newer firmware on MS Surface 2 tablets causes the type and touch cover keyboards to timeout when waiting for reports. The quirk HID_QUIRK_NO_INIT_REPORTS allows them to function normally. Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-06-22Merge branches 'for-4.2/i2c-hid', 'for-4.2/lenovo', 'for-4.2/plantronics', ↵Jiri Kosina
'for-4.2/rmi', 'for-4.2/sensor-hub', 'for-4.2/sjoy', 'for-4.2/sony' and 'for-4.2/wacom' into for-linus Conflicts: drivers/hid/wacom_wac.c
2015-06-22Merge branches 'for-4.1/upstream-fixes', 'for-4.2/upstream' and ↵Jiri Kosina
'for-4.2/logitech' into for-linus Conflicts: drivers/hid/hid-logitech-hidpp.c
2015-06-18HID: microsoft: Add Surface Power CoverRaimund Roth
Adding support for the Microsoft Surface Pro Power Cover. Signed-off-by: Raimund Roth <raimundmroth@gmail.gom> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-25HID: usbhid: add Chicony/Pixart usb optical mouse that needs QUIRK_ALWAYS_POLLHerton R. Krzesinski
I received a report from an user of following mouse which needs this quirk: usb 1-1.6: USB disconnect, device number 58 usb 1-1.6: new low speed USB device number 59 using ehci_hcd usb 1-1.6: New USB device found, idVendor=04f2, idProduct=1053 usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.6: Product: USB Optical Mouse usb 1-1.6: Manufacturer: PixArt usb 1-1.6: configuration #1 chosen from 1 choice input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input5887 generic-usb 0003:04F2:1053.16FE: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1a.0-1.6/input0 The quirk was tested by the reporter and it fixed the frequent disconnections etc. [jkosina@suse.cz: reorder the position in hid-ids.h] Signed-off-by: Herton R. Krzesinski <herton@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-13HID: usbhid: Add HID_QUIRK_NOGET for Aten DVI KVM switchLaura Abbott
Like other KVM switches, the Aten DVI KVM switch needs a quirk to avoid spewing errors: [791759.606542] usb 1-5.4: input irq status -75 received [791759.614537] usb 1-5.4: input irq status -75 received [791759.622542] usb 1-5.4: input irq status -75 received Add it. Signed-off-by: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-07HID: sjoy: support Super Joy Box 4Sean Young
This device supports force feedback and has two ports. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-27HID: usbhid: Add a quirk for raphnet multi-gamepad adaptersRaphael Assenat
The raphnet.net 4nes4snes and 2nes2snes multi-joystick adapters use a single HID report descriptor with one report ID per controller. This has the effect that the inputs of otherwise independent game controllers get packed in one large joystick device. With this patch each controller gets its own /dev/input/jsX device, which is more natural and less confusing than having all inputs going to the same place. Signed-off-by: Raphael Assenat <raph@raphnet.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-13Merge branches 'for-4.0/upstream-fixes', 'for-4.1/genius', ↵Jiri Kosina
'for-4.1/huion-uclogic-merge', 'for-4.1/i2c-hid', 'for-4.1/kconfig-drop-expert-dependency', 'for-4.1/logitech', 'for-4.1/multitouch', 'for-4.1/rmi', 'for-4.1/sony', 'for-4.1/upstream' and 'for-4.1/wacom' into for-linus
2015-04-02HID: usbhid: yet another mouse with ALWAYS_POLLOliver Neukum
The device exists with two device IDs instead of one as previously believed. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-02HID: usbhid: more mice with ALWAYS_POLLOliver Neukum
During a stress test these mice kept dropping and reappearing in runlevel 1 as opposed to 5. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-27HID: pidff: effect can't be NULLJiri Kosina
Force-beedback core guarantees that the 'effect' pointer that's being passed to ->upload() callback is non-NULL. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-25HID: add quirk for PIXART OEM mouse used by HPOliver Neukum
This mouse is also known under other IDs. It needs the quirk or will disconnect in runlevel 1 or 3. Signed-off-by: Oliver Neukum <oneukum@suse.de> CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-25HID: add HP OEM mouse to quirk ALWAYS_POLLOliver Neukum
This mouse needs QUIRK_ALWAYS_POLL. Signed-off-by: Oliver Neukum <oneukum@suse.de> CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-16HID: pidff: support more than one concurrent effectJim Keir
The PID driver (usbhid/hid-pidff.c) does not set the effect ID when uploading an effect. The result is that the initial upload works but subsequent uploads to modify effect parameters are all directed at the last-created effect. The targeted effect ID must be passed back to the device when effect parameters are changed. This is done at the start of "pidff_set_condition_report", "pidff_set_periodic_report" etc. based on the value of "pidff->block_load[PID_EFFECT_ BLOCK_INDEX].value[0]". This value is only ever set during pidff_request_effect_upload. The result is stored in "pidff->pid_id[effect->id]" at the end of pid_upload_effect, for later use. However, if an effect is modified and re-sent then this identifier is not being copied back from pidff->pid_id[effect->id] before sending the command to the device. The fix is to do this at the start of pidff_upload_effect. Signed-off-by: Jim Keir <jimkeir@oracledbadirect.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-11HID: add ALWAYS_POLL quirk for a Logitech 0xc007oliver@neukum.org
This device disconnects every 60s without X Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-03HID: uclogic: Set quirks from inside the driverBenjamin Tissoires
Based on a patch from: Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> Most of the tablets handled by hid-uclogic already use MULTI_INPUT. For the ones which are not quirked in usbhid/hidquirks, they have a custom report descriptor which contains only one report per HID interface. For those tablets HID_QUIRK_MULTI_INPUT is transparent. According to https://github.com/DIGImend/tablets, the only problematic tablet currently handled by hid-uclogic is the TWHA60 v3. This tablet presents different report descriptors from the ones currently quirked. This is not a problem per se, given that this tablet is not supported currently in this version (it needs the same command as a Huion to start forwarding events). Reviewed-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-17HID: kye: Fix report descriptor for Genius PenSketch M912Milan Plzik
Genius PenSketch M912 digitizer tablet sends incorrect report descriptor by default. This patch replaces it with a corrected one. Signed-off-by: Milan Plzik <milan.plzik@gmail.com> Reviewed-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-09Merge branches 'for-3.19/upstream-fixes', 'for-3.20/apple', ↵Jiri Kosina
'for-3.20/betop', 'for-3.20/lenovo', 'for-3.20/logitech', 'for-3.20/rmi', 'for-3.20/upstream' and 'for-3.20/wacom' into for-linus
2015-01-26HID: pidff: Fix initialisation forMicrosoft Sidewinder FF Pro 2Jim Keir
The FF2 driver (usbhid/hid-pidff.c) sends commands to the stick during ff_init. However, this is called inside a block where driver_input_lock is locked, so the results of these initial commands are discarded. This behavior is the "killer", without this nothing else works. ff_init issues commands using "hid_hw_request". This eventually goes to hid_input_report, which returns -EBUSY because driver_input_lock is locked. The change is to delay the ff_init call in hid-core.c until after this lock has been released. Calling hid_device_io_start() releases the lock so the device can be configured. We also need to call hid_device_io_stop() on exit for the lock to remain locked while ending the init of the drivers. [ benjamin.tissoires@redhat.com: imrpoved the changelog a lot ] Signed-off-by: Jim Keir <jimkeir@oracledbadirect.com> Reviewed-by: Benjamin.tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-01-21HID: Use Kbuild idiom in MakefilesMichal Marek
Use <driver>-$(CONFIG_FOO) syntax to build multipart objects with optional parts, since all the config options are bool. Also, delete the obvious comments in the usbhid Makefile. Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-01-07HID: microsoft: add support for Japanese Surface Type Cover 3Alan Wu
Based on code for the US Surface Type Cover 3 from commit be3b16341d5cd8cf2a64fcc7a604a8efe6599ff0 ("HID: add support for MS Surface Pro 3 Type Cover"): Signed-off-by: Alan Wu <alan.c.wu@gmail.com> Tested-by: Karlis Dreizis <karlisdreizis@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-29HID: Add a new id 0x501a for Genius MousePen i608XGiedrius Statkevičius
New Genius MousePen i608X devices have a new id 0x501a instead of the old 0x5011 so add a new #define with "_2" appended and change required places. The remaining two checkpatch warnings about line length being over 80 characters are present in the original files too and this patch was made in the same style (no line break). Just adding a new id and changing the required places should make the new device work without any issues according to the bug report in the following url. This patch was made according to and fixes: https://bugzilla.kernel.org/show_bug.cgi?id=67111 Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-12Merge branches 'for-3.19/hid-report-len', 'for-3.19/i2c-hid', ↵Jiri Kosina
'for-3.19/lenovo', 'for-3.19/logitech', 'for-3.19/microsoft', 'for-3.19/plantronics', 'for-3.19/rmi', 'for-3.19/sony' and 'for-3.19/wacom' into for-linus
2014-12-12Merge branches 'for-3.18/upstream-fixes' and 'for-3.19/upstream' into for-linusJiri Kosina
Conflicts: drivers/hid/hid-input.c
2014-12-01HID: make hid_report_len as a static inline function in hid.hMathieu Magnaudet
In several hid drivers it is necessary to calculate the length of an hid_report. This patch exports the existing static function hid_report_len of hid-core.c as an inline function in hid.h Signed-off-by: Mathieu Magnaudet <mathieu.magnaudet@enac.fr> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-19HID: yet another buggy ELAN touchscreenOliver Neukum
The touchscreen needs the same quirk as the other models. Signed-off-by: Oliver Neukum <oneukum@suse.de> Reported-by: Bryan Poling <poli0048@umn.edu> CC: stable@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-11HID: add support for MS Surface Pro 3 Type CoverAlan Wu
Surface Pro 3 Type Cover that works with Ubuntu (and possibly Arch) from this thread. Both trackpad and keyboard work after compiling my own kernel. http://ubuntuforums.org/showthread.php?t=2231207&page=2&s=44910e0c56047e4f93dfd9fea58121ef Also includes Jarrad Whitaker's message which sources http://winaero.com/blog/how-to-install-linux-on-surface-pro-3/ which he says is sourced from a Russian site Signed-off-by: Alan Wu <alan.c.wu@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-03HID: usbhid: enable always-poll quirk for Elan Touchscreen 0103Adel Gadllah
Yet another device that needs this quirk. Reported-by: Tanguy de Baritault <tdebaritault@gmail.com> Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29HID: usbhid: prevent unwanted events to be sent when re-opening the deviceBenjamin Tissoires
When events occurs while no one is listening to the node (hid->open == 0 and usb_kill_urb() called) some events are still stacked somewhere in the USB (kernel or device?) stack. When the node gets reopened, these events are drained, and this results in spurious touch down/up, or mouse button clicks. The problem was spotted with touchscreens in fdo bug #81781 [1], but it actually occurs with any mouse using hid-generic or touchscreen. A way to reproduce it is to call: $ xinput disable 9 ; sleep 5 ; xinput enable 9 With 9 being the device ID for the touchscreen/mouse. During the "sleep", produce some touch events or click events. When "xinput enable" is called, at least one click is generated. This patch tries to fix this by draining the queue for 50 msec and during this time frame, not forwarding these old events to the hid layer. Hans completed the explanation: """ Devices like mice (basically any hid device) will have a fifo on the device side, when we stop submitting urbs to get hid reports from it, that fifo will fill up, and when we resume we will get whatever is there in that fifo. """ [1] https://bugs.freedesktop.org/show_bug.cgi?id=81781 Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 11:36:47 +0000