summaryrefslogtreecommitdiff
path: root/drivers/hid/intel-ish-hid
AgeCommit message (Collapse)Author
2018-09-24HID: intel-ish-hid: use helper function to search client idEven Xu
ishtp exposed helper ishtp_fw_cl_get_client() function for client information searching, so switch to use it. Signed-off-by: Even Xu <even.xu@intel.com> Reviewed-by: Andriy Shevchenko <andriy.shevchenko@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-09-24HID: intel-ish-hid: ishtp: add helper function for client searchEven Xu
Add helper function ishtp_fw_cl_get_client() for client driver searching client information to hide internal details from callers. Signed-off-by: Even Xu <even.xu@intel.com> Reviewed-by: Andriy Shevchenko <andriy.shevchenko@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-09-24HID: intel-ish-hid: use helper function to access client bufferEven Xu
ishtp bus driver exposed helper functions for client buffer accessing, so change to use these functions in ishtp-hid-client driver to avoid access client buffer directly. Signed-off-by: Even Xu <even.xu@intel.com> Reviewed-by: Andriy Shevchenko <andriy.shevchenko@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-09-24HID: intel-ish-hid: ishtp: add helper functions for client buffer operationEven Xu
Add helper ishtp_cl_tx_empty() and ishtp_cl_rx_get_rb() to hide internal details from callers, who needs this functionality. Signed-off-by: Even Xu <even.xu@intel.com> Reviewed-by: Andriy Shevchenko <andriy.shevchenko@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-09-24HID: intel-ish-hid: use helper function for private driver data set/getEven Xu
Use helper set/get function to set/get driver data in ishtp-hid-client driver instead of directly accessing cl_device driver_data member. Signed-off-by: Even Xu <even.xu@intel.com> Reviewed-by: Andriy Shevchenko <andriy.shevchenko@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-09-24HID: intel-ish-hid: ishtp: add helper function for driver data get/setEven Xu
Add helper function ishtp_set_drvdata() and ishtp_get_drvdata() for different ISH client drivers to set/get private driver data. Signed-off-by: Even Xu <even.xu@intel.com> Reviewed-by: Andriy Shevchenko <andriy.shevchenko@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-08-28HID: intel-ish-hid: Enable Sunrise Point-H ish driverAndreas Bosch
Added PCI ID for Sunrise Point-H ISH. Signed-off-by: Andreas Bosch <linux@progandy.de> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-08-20Merge branch 'for-4.19/upstream' into for-linusJiri Kosina
Assorted small driver/core fixes.
2018-08-02HID: intel_ish-hid: tx_buf memory leak on probe/removeAnton Vasilyev
ish_dev_init() allocates 512*176 bytes memory for tx_buf and stores it at &dev->wr_free_list_head.link list on ish_probe(). But there is no deallocation of this memory in ish_remove() and in ish_probe() error path. So current intel-ish-ipc provides 88 KB memory leak for each probe/release. The patch replaces kzalloc allocation by devm_kzalloc and removes ishtp_device *dev deallocation by kfree. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-08-02HID: intel-ish-hid: Prevent loading of driver on MehlowSrinivas Pandruvada
On Mehlow Xeon-E workstation, ISH PCI device is enabled but without ISH firmware. Here the ISH device PCI device id was reused for some non Linux storage drivers. So this was not done for enabling ISH. But this has a undesirable side effect for Linux. Here the ISH driver will be loaded via PCI enumeration and will try to do reset sequence. But reset sequence will wait till timeout as there is no real ISH firmware is present to take action. This delay will add to boot time of Linux (This platform will still continue to boot after this timeout). To avoid this boot delay we need to prevent loading of ISH drivers on this platform. So we need to have hack to avoid treating this device as ISH on this platform. To identify this workstation, we need some runtime method. Luckily there are special PCI id on this workstation to distinguish from the client version of this platform. On client version, the ISH is supported using same PCI device id. So this change look for the presence of PCI device IDs A309 and A30A and exit. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-07-17HID: intel-ish-hid: remove redundant variable num_fragsColin Ian King
Variable num_frags is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'num_frags' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-06-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - Wacom 2nd-gen Intuos Pro large Y axis handling fix from Jason Gerecke - fix for hibernation in Intel ISH driver, from Even Xu - crash fix for hid-steam driver, from Rodrigo Rivas Costa - new device ID addition to google-hammer driver * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wacom: Correct logical maximum Y for 2nd-gen Intuos Pro large HID: intel_ish-hid: ipc: register more pm callbacks to support hibernation HID: steam: use hid_device.driver_data instead of hid_set_drvdata() HID: google: Add support for whiskers
2018-06-20HID: intel_ish-hid: ipc: register more pm callbacks to support hibernationEven Xu
Current ISH driver only registers suspend/resume PM callbacks which don't support hibernation (suspend to disk). Basically after hiberation, the ISH can't resume properly and user may not see sensor events (for example: screen rotation may not work). User will not see a crash or panic or anything except the following message in log: hid-sensor-hub 001F:8086:22D8.0001: timeout waiting for response from ISHTP device So this patch adds support for S4/hiberbation to ISH by using the SIMPLE_DEV_PM_OPS() MACRO instead of struct dev_pm_ops directly. The suspend and resume functions will now be used for both suspend to RAM and hibernation. If power management is disabled, SIMPLE_DEV_PM_OPS will do nothing, the suspend and resume related functions won't be used, so mark them as __maybe_unused to clarify that this is the intended behavior, and remove #ifdefs for power management. Cc: stable@vger.kernel.org Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-26HID: intel-ish-hid: use put_device() instead of kfree()Arvind Yadav
Never directly free @dev after calling device_register(), even if it returned an error. Always use put_device() to give up the reference initialized. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-25HID: intel_ish-hid: Stop using a static local buffer in get_report()Hans de Goede
hid_ishtp_get_report() may be called by multiple callers at the same time, causing trouble with the static local buffer used. Also there is no reason to use a non stack buffer, the buffer is tiny and ishtp_cl_send() copies its contents so the lifetime is not an issue either. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-25HID: intel_ish-hid: Move header size check to inside the loopHans de Goede
With the headersize check outside of the loop, the second time through the loop the: "payload_len = recv_msg->hdr.size;" statement may deref recv_msg while it is pointing outside of our input buffer. Move the headersize check to inside the loop to fix this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-01-23HID: intel-ish-hid: Enable Cannon Lake and Coffee Lake laptop/desktopSrinivas Pandruvada
Added PCI ID for Cannon Lake and Coffee Lake laptop/desktop skews. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - open/close tracking improvements from Dmitry Torokhov - battery support improvements in Wacom driver from Jason Gerecke - Win8 support fixes from Benjamin Tissories and Hans de Geode - misc fixes to Intel-ISH driver from Arnd Bergmann - support for quite a few new devices and small assorted fixes here and there * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (35 commits) HID: intel-ish-hid: Enable Gemini Lake ish driver HID: intel-ish-hid: Enable Cannon Lake ish driver HID: wacom: fix mistake in printk HID: multitouch: optimize the sticky fingers timer HID: multitouch: fix rare Win 8 cases when the touch up event gets missing HID: multitouch: use BIT macro HID: Add driver for Retrode2 joypad adapter HID: multitouch: Add support for Google Rose Touchpad HID: multitouch: Support PTP Stick and Touchpad device HID: core: don't use negative operands when shift HID: apple: Use country code to detect ISO keyboards HID: remove no longer used hid->open field greybus: hid: remove custom locking from gb_hid_open/close HID: usbhid: remove custom locking from usbhid_open/close HID: i2c-hid: remove custom locking from i2c_hid_open/close HID: serialize hid_hw_open and hid_hw_close HID: usbhid: do not rely on hid->open when deciding to do IO HID: hiddev: use hid_hw_power instead of usbhid_get/put_power HID: hiddev: use hid_hw_open/close instead of usbhid_open/close HID: asus: Add support for Zen AiO MD-5110 keyboard ...
2017-06-30HID: intel-ish-hid: Enable Gemini Lake ish driverSong Hongyan
Added PCI ID for Gemini Lake ISH. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-06-30HID: intel-ish-hid: Enable Cannon Lake ish driverSong Hongyan
Added PCI ID for Cannon Lake ISH. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-06-09hid: intel-ish-hid: use dev_groups and not dev_attrs for bus_typeGreg Kroah-Hartman
The dev_attrs field has long been "depreciated" and is finally being removed, so move the driver to use the "correct" dev_groups field instead for struct bus_type. Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Wei Yongjun <weiyj.lk@gmail.com> Cc: Bhumika Goyal <bhumirks@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: <linux-input@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-30HID: intel_ish-hid: enable compile testingArnd Bergmann
To increase build coverage, drivers should generally be allowed to build on other architectures even if they are only used on one of them. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-05-30HID: intel_ish-hid: fix format string for size_tArnd Bergmann
When building for 32-bit architectures, we get a harmless warning: intel-ish-hid/ishtp-hid-client.c: In function 'process_recv': intel-ish-hid/ishtp-hid-client.c:139:7: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'unsigned int' [-Werror=format=] This changes the format string to print size_t variables using %zu instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-05-30HID: intel_ish-hid: convert timespec to ktime_tArnd Bergmann
The internal accounting uses 'timespec' based time stamps, which is slightly inefficient and also problematic once we get to the time_t overflow in 2038. When communicating to the firmware, we even get an open-coded 64-bit division that prevents the code from being build-tested on 32-bit architectures and is inefficient due to the double conversion from 64-bit nanoseconds to seconds+nanoseconds and then microseconds. This changes the code to use ktime_t instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-05-30HID: intel_ish-hid: clarify locking in client codeArnd Bergmann
I was trying to understand this code while working on a warning fix and the locking made no sense: spin_lock_irqsave() is pointless when run inside of an interrupt handler or nested inside of another spin_lock_irq() or spin_lock_irqsave(). Here it turned out that the comment above the function is wrong, as both recv_ishtp_cl_msg_dma() and recv_ishtp_cl_msg() can in fact be called from a work queue rather than an ISR, so we do have to use the irqsave() version once. This fixes the comments accordingly, removes the misleading 'dev_flags' variable and modifies the inner spinlock to not use 'irqsave'. No functional change is intended, this is just for readability and it slightly simplifies the object code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-05-30HID: intel_ish-hid: fix potential uninitialized data usageArnd Bergmann
gcc points out an uninialized pointer dereference that could happen if we ever get to recv_ishtp_cl_msg_dma() or recv_ishtp_cl_msg() with an empty &dev->read_list: drivers/hid/intel-ish-hid/ishtp/client.c: In function 'recv_ishtp_cl_msg_dma': drivers/hid/intel-ish-hid/ishtp/client.c:1049:3: error: 'cl' may be used uninitialized in this function [-Werror=maybe-uninitialized] The warning only appeared in very few randconfig builds, as the spinlocks tend to prevent gcc from tracing the variables. I only saw it in configurations that had neither SMP nor LOCKDEP enabled. As we can see, we only enter the case if 'complete_rb' is non-NULL, and then 'cl' is known to point to complete_rb->cl. Adding another initialization to the same pointer is harmless here and makes it clear to the compiler that the behavior is well-defined. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-20Merge branches 'for-4.10/upstream-fixes', 'for-4.11/intel-ish', ↵Jiri Kosina
'for-4.11/mayflash', 'for-4.11/microsoft', 'for-4.11/rmi', 'for-4.11/upstream' and 'for-4.11/wacom' into for-linus
2017-02-14HID: intel-ish-hid: constify device_type structureBhumika Goyal
Declare device_type structure as const as it is only stored in the type field of a device structure. This field is of type const, so add const to the declaration of device_type structure. File size before: drivers/hid/intel-ish-hid/ishtp/bus.o text data bss dec hex filename 4260 336 16 4612 1204 hid/intel-ish-hid/ishtp/bus.o File size after: drivers/hid/intel-ish-hid/ishtp/bus.o text data bss dec hex filename 4324 272 16 4612 1204 hid/intel-ish-hid/ishtp/bus.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-08HID: intel-ish-hid: ipc: check FW status to distinguish ISH resume pathsEven Xu
For ISH resume, there are two paths, they need different way to handle: one where ISH is not powered off, in that case a simple resume message is enough, in other case we need a reset sequence. We can use ISH FW status to distinguish those two cases and handle them properly. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-02HID: intel-ish-hid: format 32-bit integers with %XNicolas Iooss
In ishtp_hid_probe(), use %04X instead of %04hX to format __u32 values, in order to silent a format error reported by clang: drivers/hid/intel-ish-hid/ishtp-hid.c:212:3: error: format specifies type 'unsigned short' but the argument has type '__u32' (aka 'unsigned int') [-Werror,-Wformat] hid->vendor, hid->product); ^~~~~~~~~~~ drivers/hid/intel-ish-hid/ishtp-hid.c:212:16: error: format specifies type 'unsigned short' but the argument has type '__u32' (aka 'unsigned int') [-Werror,-Wformat] hid->vendor, hid->product); ^~~~~~~~~~~~ Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-02HID: intel-ish-hid: add printf attribute to print_log()Nicolas Iooss
Structure ishtp_device contains a logging function, print_log(), which formats some of its parameters using vsnprintf(). Add a __printf attribute to this function field (and to ish_event_tracer()) in order to detect at compile time issues related to the printf-like formatting. While at it, make format parameter a const pointer as print_log() is not supposed to modify it. Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-12-19HID: intel-ish-hid: Remove unneeded linux/miscdevice.h includeCorentin Labbe
hid/intel-ish-hid does not use any miscdevice so this patch remove this unnecessary inclusion. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-12-14Merge branches 'for-4.10/asus', 'for-4.10/cp2112', ↵Jiri Kosina
'for-4.10/i2c-hid-nopower', 'for-4.10/intel-ish', 'for-4.10/mayflash', 'for-4.10/microsoft-surface-3', 'for-4.10/multitouch', 'for-4.10/sony', 'for-4.10/udraw-ps3', 'for-4.10/upstream' and 'for-4.10/wacom/generic' into for-linus
2016-12-02HID: intel_ish-hid: use %pUL for uuid formattingRasmus Villemoes
We have the %pU printf extension for doing exactly this. Saves some .text, and is likely also a little faster. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-29HID: intel-ish-hid: Fix potential race conditionSrinivas Pandruvada
Although unlikely but it is possible that when a connect or disconnect request is issued to the firmware, before the response comes, user terminates the client session. In this case when the response is arrived there is no matching client instance in the list of currently active clients. In this case, don't issue call to wake up a waiting client. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-16HID: intel-ish-hid: ipc: use msleep_interrupt() for waitEven Xu
set_current_task() must be called before schedule_timeout(), for this driver, in order to avoid incorrect usage, use msleep_interrupt() instead. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-16HID: intel-ish-hid: ipc: change timed_wait_for_timeout() to be a functionEven Xu
The macro timed_wait_for_timeout() only be used in one function, so move this marco from header file and change it to a function in ipc.c, where it is used. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-16HID: intel-ish-hid: ipc: remove unused macroEven Xu
The macro timed_wait_for() in utils.h isn't used in current ipc driver, so remove it for avoiding confusion. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-05HID: intel-ish-hid: initialize ts_format.reservedJiri Kosina
ts_format.reserved is not used anywhere yet, but the compiler generates a warning when the struct's (uninitialized) field is being copied around drivers/hid/intel-ish-hid/ipc/ipc.c: In function ‘write_ipc_from_queue’: drivers/hid/intel-ish-hid/ipc/ipc.c:316: warning: ‘ts_format.reserved’ may be used uninitialized in this function Avoid this by force-initializing the field to zero. Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-05HID: intel-ish-hid: request_irq failureSrinivas Pandruvada
On some platforms ISH interrupt is shared, which causes request_irq to fail. This requires IRQF_SHARED irq flag. But IRQF_NO_SUSPEND and IRQF_SHARED should not be used together, so removed IRQF_NO_SUSPEND flag. Anyway this driver doesn't require IRQF_NO_SUSPEND, as this interrupt is not required during "noirq" phases of suspending and resuming devices as well as during the time when nonboot CPUs are taken offline and brought back online. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-05HID: intel-ish-hid: Fix driver reinit failureEven Xu
When built as a module, modprobe followed by rmmod can fail because DMA was still active. So to fix this, DMA needs to be disabled during module exit. This change disables DMA during modules exit and change the ISH PCI device status to D3. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-05HID: intel-ish-hid: Move DMA disable code to new functionEven Xu
Add a new function ish_disable_dma() and move DMA disable operations here, so that this functionality can be reused. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-05HID: intel-ish-hid: consolidate ish wake up operationEven Xu
Same operations are done in ish_hw_start() and _ish_hw_reset() to wakeup ISH device. Consolidate them by introducing a new function ish_wakeup() and move the code there. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-03HID: intel-ish-hid: Fix !CONFIG_PM build warningBorislav Petkov
Fix drivers/hid/intel-ish-hid/ipc/pci-ish.c:247:12: warning: ‘ish_suspend’ defined but not used [-Wunused-function] static int ish_suspend(struct device *device) ^ drivers/hid/intel-ish-hid/ipc/pci-ish.c:282:12: warning: ‘ish_resume’ defined but not used [-Wunused-function] static int ish_resume(struct device *device) ^ by sticking them in the CONFIG_PM range too. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: linux-input@vger.kernel.org Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-29HID: intel_ish-hid: Remove duplicated include from bus.cWei Yongjun
Remove duplicated include. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-29HID: intel_ish-hid: Use kzalloc instead of kmalloc/memsetWei Yongjun
Use kzalloc rather than kmalloc followed by memset with 0. Generated by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-29HID: intel_ish-hid: Convert list_for_each to entry variantWei Yongjun
convert list_for_each() to list_for_each_entry() where applicable. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-29HID: intel-ish-hid: use module_pci_driver to simplify the codeWei Yongjun
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 20:16:21 +0000