summaryrefslogtreecommitdiff
path: root/drivers/hid/hid-logitech-hidpp.c
AgeCommit message (Collapse)Author
2017-10-12HID: logitech-hidpp: fix mistake in printk, "feeback" -> "feedback"Colin Ian King
Trivial fix to spelling mistake in hid_info message and add line break to split an overly long line to clean up a checkpatch warning. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-By: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-08-03HID: logitech-hidpp: constify attribute_group structures.Arvind Yadav
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-07-20HID: hid-logitech-hidpp: add NULL check on devm_kmemdup() return valueGustavo A. R. Silva
Check return value from call to devm_kmemdup() in order to prevent a NULL pointer dereference. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-06HID: logitech-hidpp: add a sysfs file to tell we support power_supplyBenjamin Tissoires
This way, upower can add a simple udev rule to decide whether or not it should use the internal unifying support or just the generic kernel one. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-06HID: logitech-hidpp: enable HID++ 1.0 battery reportingBenjamin Tissoires
Also enable battery reporting for HID++ 1.0 devices through 2 registers: 0x07: battery status -> reports only 4 levels (critical, low, good, full) 0x0D: battery mileage -> reports true pourcentage Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-06HID: logitech-hidpp: add support for battery status for the K750Benjamin Tissoires
The Solar Keyboard uses a different feature to report the battery level. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-06HID: logitech-hidpp: battery: provide CAPACITY_LEVELBenjamin Tissoires
CAPACITY LEVEL allows to forward rough information on the battery mileage. HID++ 2.0 devices will either report percentage or levels, so better forwarding this information to the user space. The M325 supports only 2 levels: 'Full' and 'Critical'. With mileage, it will report either 90% or 5%, which might confuse users. With this change the battery will either report "Full" or "Critical". Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-06HID: logitech-hidpp: rename battery level into capacityBenjamin Tissoires
The power_supply term for the percentage is capacity. Capacity level can be given when non accurate mileage is provided by the device, so better stick to the terms used in power_supply. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-06HID: logitech-hidpp: battery: provide ONLINE propertyBenjamin Tissoires
When ONLINE isn't set, upower should ignore the battery capacity, so there is no need to overload it with some random values. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-06HID: logitech-hidpp: notify battery on connectBenjamin Tissoires
When a device reconnects, there is a high chance its power supply has been changed (for a battery replacement for instance). Just forward the battery state here. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-06HID: logitech-hidpp: return an error if the queried feature is not presentBenjamin Tissoires
Or the device just answers a valid feature '0'. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-06HID: logitech-hidpp: create the battery for all types of HID++ devicesBenjamin Tissoires
The creation of the power_supply should not be in a HID++ 2.0 specific function. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-06HID: logitech-hidpp: forward device info in power_supplyBenjamin Tissoires
Better forwarding the device name, manufacturer and serial to upower. Note that serial is still empty, it will be filled in a later patch in this series. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-06HID: logitech-hidpp: handle battery events in hidpp_raw_hidpp_event()Benjamin Tissoires
Battery events are reported through HID++, so we need to be sure the report ID is the HID++ one. Without this, we might receive keyboard events that looks just like battery events with wrong data and which will confuse user space. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-06HID: logitech-hidpp: rework hidpp_connect_event()Benjamin Tissoires
Looks like all users don't care about a disconnect. Simplify the various variant_connect() and put the connect state check at the beginning. For delayed input devices, make sure we go through all other connect values (protocol, battery) before bailing out. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-06HID: logitech-hidpp: retrieve the HID++ device name when availableBenjamin Tissoires
hidpp->name can't be null. Only HID++ 2.0 and above device supports the query. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-06HID: logitech-hidpp: rework probe path for unifying devicesBenjamin Tissoires
Unifying devices are different from others because they can probed while not connected. So we need to talk to the receiver to get some extra information like the device name and the serial. Instead of having conditionals while attempting to read the device name from HID++ 2.0, have a special init path for them. Store the retrieved serial in hdev->uniq. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-06HID: logitech-hidpp: create a capabilities bits fieldBenjamin Tissoires
Do not pollute the quirks bits field which is public API with elements that are queried from the device. Move the 2 battery capabilities into the new field. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-06HID: logitech-hidpp: do not query the name through HID++ for 1.0 devicesBenjamin Tissoires
Unless they are connected through unifying, they don't support it, so remove one error in the logs. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-06HID: logitech-hidpp: make sure we only register one battery per deviceBenjamin Tissoires
Simple check to add, huge improvement :) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-06HID: logitech-hidpp: Add scope to batteryBastien Nocera
Without a scope defined, UPower assumes that the battery provides power to the computer it's connected to, like a laptop battery or a UPS. Tested-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-07-07HID: logitech-hidpp: remove HIDPP_QUIRK_CONNECT_EVENTSBenjamin Tissoires
Now that we can create battery power_supply sources, it's better to enable the connect_event callback unconditionally. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-07-07HID: logitech-hidpp: add battery support for HID++ 2.0 devicesPeter Hutterer
If the 0x1000 Unified Battery Level Status feature exists, expose the battery level. The main drawback is that while a device is plugged in its battery level is 0. To avoid exposing that as 0% charge we make up a number based on the charging status. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-01-28HID: logitech-hidpp: limit visibility of init/deinit functionsJiri Kosina
hidpp_ff_init() and hidpp_ff_deinit() are not used outside of hid-logitech-hidpp.c, so let's make them static. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-01-28HID: logitech-hidpp: Force feedback support for the Logitech G920Edwin Velds
This patch implements force feedback support for the Logitech G920 Driving Force Racing Wheel. It is a generic implementation of feature 0x8123 of the Logitech HID++ protocol and should be usable for any future devices that implement this feature. This patch should be applied after the basic G920 support patch by Simon Wood: http://www.spinics.net/lists/linux-input/msg42174.html The driving supports everything that is supported by the G920 firmware: FF_CONSTANT FF_PERIODIC FF_SINE FF_SQUARE FF_SAW_UP FF_SAW_DOWN FF_TRIANGLE FF_SPRING FF_DAMPER FF_AUTOCENTER FF_GAIN and for version 2 firmware also: FF_FRICTION FF_INERTIA FF_RAMP Both envelopes and replay values are supported as well, but some problems may occur when using firmware release 1. There is also a small residual clockwise damper in the wheel when using the first firmware release. All problems are fixed in the soon te be released firmware version 2. The default spring is disabled by permanently placing a spring force in the wheel. This spring is also used as the autocenter spring. Note: The wheel _DOES_NOT_ auto switch to Logitech/HID mode (it is stuck in XBox since the xpad changes where not included). Michal has an alternative approach documented here (and the changes should be submitted upstream to usb_modeswitch project): === Create a file named "046d:c261" in "/etc/usb_modeswitch.d" with the following content: DefaultVendor=046d DefaultProduct=c261 MessageEndpoint=01 ResponseEndpoint=01 TargetClass=0x03 MessageContent="0f00010142" Then run "usb_modeswitch -c /etc/modeswitch.d/046d:c291" as root and watch the magic happen:) === [jkosina@suse.cz: added information about mode switching from Simon] [jkosina@suse.cz: fixed a few stylistic issues pointed out by Simon] [jkosina@suse.cz: fix merge conflict due to to_hid_device() changes] Signed-off-by: Edwin Velds <e.velds@gmail.com> Tested-by: Elias Vanderstuyft <elias.vds@gmail.com> Tested-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-28HID: move to_hid_device() to hid.hGeliang Tang
to_hid_device() macro is defined in both hid-lg4ff.c and hid-logitech-hidpp.c. So I move it to include/linux/hid.h. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-20HID: hid-logitech-hidpp: G920 remove deadzonesSimon Wood
Ensure that the G920 is not given the default deadzones. Signed-off-by: Simon Wood <simon@mungewell.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-20HID: hid-logitech-hidpp: Add range sysfs for Logitech G920Simon Wood
The G920 can adjust the amount of 'turn' it permits, this patch adds a sysfs file 'range' to control this. Signed-off-by: Simon Wood <simon@mungewell.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-20HID: hid-logitech-hidpp: Add basic support for Logitech G920Simon Wood
This patch adds basic support for the Logitech G920 wheel when in HID mode. This wheel 'speaks' the HID++ protocol, and therefor is driven with hid-logitech-hidpp. At this stage the driver only shows that it can communicate with the wheel by outputting the name discovered over HID++. The normal HID functions work to give input functionality using joystick/event interface. Note: in 'hidpp_probe()' we have to start the hardware to get packets flowing, the same might apply in future for other devices which don't use the unifying protocol. Signed-off-by: Simon Wood <simon@mungewell.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-20HID: hid-logitech-hidpp: Add support for very long packetsSimon Wood
Patch add support for the 'very long' HID++ packets, which are 64 bytes in length. Signed-off-by: Simon Wood <simon@mungewell.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-06Merge branches 'for-4.3/upstream-fixes', 'for-4.4/corsair', ↵Jiri Kosina
'for-4.4/dragonrise', 'for-4.4/i2c-hid', 'for-4.4/logitech', 'for-4.4/microsoft', 'for-4.4/multitouch', 'for-4.4/roccat-sysfs-deprecation', 'for-4.4/upstream' and 'for-4.4/wacom' into for-linus
2015-09-30HID: hid-input: allow input_configured callback return errorsDmitry Torokhov
When configuring input device via input_configured callback we may encounter errors (for example input_mt_init_slots() may fail). Instead of continuing with half-initialized input device let's allow driver indicate failures. Signed-off-by: Jaikumar Ganesh <jaikumarg@android.com> Signed-off-by: Arve Hjønnevåg <arve@android.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> Acked-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-04HID: logitech-hidpp: add support to disable tap-to-click on the K400Benjamin Tissoires
The Logitech K400 keyboard has an embedded touchpad which is seen as a mouse from the OS point of view. There is a hardware shortcut to disable tap-to-click but the setting is not remembered accross reset, annoying some users. We can toggle this feature from the host by using the feature 0x6010: Touchpad FW items Reported-by: BALATON Zoltan <balaton@eik.bme.hu> Tested-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-04HID: logitech-hidpp: split HIDPP_QUIRK_DELAYED_INIT in twoBenjamin Tissoires
HIDPP_QUIRK_DELAYED_INIT means two things currently: - we want to delay the initialization process - we do not want hid to create an input device based on the report descriptor. This should actually be 2 different quirks so we can have special connect events while still having HID creating the input for us. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-06-22Merge branches 'for-4.1/upstream-fixes', 'for-4.2/upstream' and ↵Jiri Kosina
'for-4.2/logitech' into for-linus Conflicts: drivers/hid/hid-logitech-hidpp.c
2015-06-01HID: hidpp: Add driver for mouse logitech M560Goffredo Baroncelli
The Logitech M560 is a wireless mouse designed for windows 8 which uses the unifying receiver. Compared to a standard one, some buttons (the middle one and the two ones placed on the side) are bound to a key combination instead of a generating classic "mouse" button events. The device shows up as a mouse and keyboard combination: when the middle button is pressed it sends a key (as keyboard) combination, the same happens for the two side button. The left/right/wheel work as expected from a mouse. To complicate things further, the middle button sends different keys combinations between odd and even presses. In the "even" press it also sends a left click. But the worst thing is that no event is generated when the middle button is released. It is possible to re-configure the mouse sending a command (see function m560_send_config_command()). After this command the mouse sends some useful data when the buttons are pressed and/or released. [jkosina@suse.cz: fix build breakage due to leftover from previous patch version] Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-07Revert "HID: logitech-hidpp: support combo keyboard touchpad TK820"Benjamin Tissoires
This reverts commit 3a61e97563d78a2ca10752902449570d8433ce76. The Logitech TK820 seems to be affected by a firmware bug which delays the sending of the keys (pressed, or released, which triggers a key-repeat) while holding fingers on the touch sensor. This behavior can be observed while using the mouse emulation mode if the user moves the finger while typing (highly improbable though). Holding the finger still while in the mouse emulation mode does not trigger the key repeat problem. So better keep things in their previous state to not have to explain users that the new key-repeat bug they see is a "feature". Furthermore, I noticed that I disabled the media keys whith this patch. Sorry, my bad. I think it is best to revert the patch, in all the current versions it has been shipped. Cc: <stable@vger.kernel.org> # v3.19 and above Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-05HID: logitech-hidpp: fix error return codeJulia Lawall
Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-02HID: logitech-hidpp: add a module parameter to keep firmware gesturesBenjamin Tissoires
The Logitech T650 used to report 3 fingers swipes to the up as a press on the Super key. When we switched the touchpad to the raw mode, we also disable such firmware gesture and some users may rely on it. Unfortunately, 3 finger swipes are still not supported in most of the Linux environments, which means that we disabled a feature of the touchpad. Allow users to revert the raw reporting mode and keep going with the firmware gestures by providing a new module parameter. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-09Merge branches 'for-3.19/upstream-fixes', 'for-3.20/apple', ↵Jiri Kosina
'for-3.20/betop', 'for-3.20/lenovo', 'for-3.20/logitech', 'for-3.20/rmi', 'for-3.20/upstream' and 'for-3.20/wacom' into for-linus
2015-01-09HID: logitech-hidpp: store the name of the device in struct hidppBenjamin Tissoires
If a disconnect occurs while getting the actual name of the device (which can take several HID transactions), the name of the device will be the hid name, provided by the Unifying Receiver. This means that in some cases, the user space will see a different name that what it usually sees when there is no disconnect. We should store the name of the device in the struct hidpp. That way, if a disconnect occurs while we are accessing the name, hidpp_connect_event() can fail, and the input node is not created. The input node will be created only if we have a connection which lasts long enough to retrieve all the requested information: name, protocol, and specific configuration. Reviewed-by: Peter Wu <peter@lekensteyn.nl> Tested-by: Peter Wu <peter@lekensteyn.nl> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-19HID: logitech-hidpp: prefix the name with "Logitech"Benjamin Tissoires
Current names are reported as "K750", "M705", and it can be misleading for the users when they look at their input device list. Prefixing the names with "Logitech " makes things better. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Peter Wu <peter@lekensteyn.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-19HID: logitech-hidpp: avoid unintended fall-throughPeter Wu
Add a return to avoid a fall-through. Introduced in commit 57ac86cf52e903d9e3e0f12b34c814cce6b65550 ("HID: logitech-hidpp: add support of the first Logitech Wireless Touchpad"). Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-19HID: logitech-hidpp: detect HID++ 2.0 errors tooPeter Wu
Devices speaking HID++ 2.0 report a different error code (0xff). Detect these errors too to avoid 5 second delays when the device reports an error. Caught by... well, a bug in the QEMU emulation of this receiver. Renamed fap to rap for HID++ 1.0 errors because it is more logical, it has no functional difference. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-17HID: logitech-hidpp: prefix the name with "Logitech"Benjamin Tissoires
Current names are reported as "K750", "M705", and it can be misleading for the users when they look at their input device list. Prefixing the names with "Logitech " makes things better. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Peter Wu <peter@lekensteyn.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-17HID: logitech-hidpp: bail out if wtp_connect failsBenjamin Tissoires
If wtp_connect() fails, that means most of the time that the device has been disconnected. Subsequent attempts to contact the device will fail too, so it's simpler to bail out earlier. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Peter Wu <peter@lekensteyn.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-17HID: logitech-hidpp: separate HID++ from WTP processingPeter Wu
Previously wtp_raw_event would be called through hidpp_raw_hidpp_event (for the touchpad report) and hidpp_raw_event (for the mouse report). This patch removes one calling surface, making a clearer distinction between "generic HID++ processing" (matching internal reports) and device-specific event processing. Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-17HID: logitech-hidpp: check WTP report lengthPeter Wu
Malicious USB devices can send bogus reports smaller than the expected buffer size. Ensure that the length for WTP reports is valid to avoid reading out of bounds. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-11HID: logitech-hidpp: disable io in probe error pathPeter Wu
Balance a hid_device_io_start() call with hid_device_io_stop() in the error path. This avoids processing of HID reports when the probe fails which possibly leads to invalid memory access in hid_device_probe() as report_enum->report_id_hash might already be freed via hid_close_report(). hid_set_drvdata() is called before wtp_allocate, be consistent and clear drvdata too on the error path of wtp_allocate. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-11HID: logitech-hidpp: add boundary check for name retrievalPeter Wu
The HID response has a limited size. Do not trust the value returned by hardware, check that it really fits in the message. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 03:49:14 +0000