summaryrefslogtreecommitdiff
path: root/drivers/hid/hid-input.c
AgeCommit message (Collapse)Author
2016-10-07Merge branches 'for-4.8/upstream-fixes', 'for-4.9/alps', ↵Jiri Kosina
'for-4.9/hid-input', 'for-4.9/intel-ish', 'for-4.9/kye-uclogic-waltop-fixes', 'for-4.9/logitech', 'for-4.9/sony', 'for-4.9/upstream' and 'for-4.9/wacom' into for-linus
2016-09-19HID: input: ignore System Control application usages if not System ControlsBenjamin Tissoires
Microsoft is reusing its report descriptor again and again, and part of it looks like this: 0x05, 0x01, // Usage Page (Generic Desktop) 299 0x09, 0x80, // Usage (System Control) 301 0xa1, 0x01, // Collection (Application) 303 0x85, 0x03, // Report ID (3) 305 0x19, 0x00, // Usage Minimum (0) 307 0x29, 0xff, // Usage Maximum (255) 309 0x15, 0x00, // Logical Minimum (0) 311 0x26, 0xff, 0x00, // Logical Maximum (255) 313 0x81, 0x00, // Input (Data,Arr,Abs) 316 0xc0, // End Collection 318 While there is nothing wrong in term of processing, we do however blindly map the full usage range (it's an array) from 0x00 to 0xff, which creates some interesting axis, like ABS_X|Y, and a bunch of ABS_MISC + n. While libinput and other stacks don't care that much (we can detect them), joydev is very happy and attaches itself to the mouse or keyboard. The problem is that joydev now handles the device as a joystick, but given that we have a HID array, it sets all the ABS_* values to 0. And in its world, 0 means -32767 (minimum value), which sends spurious events to games (think Steam). It looks like hid-microsoft tries to tackle the very same problem with its .report_fixup callback. But fixing the report descriptor is an endless task and is quite obfuscated. So take the hammer, and decide that if the application is meant to be System Control, any other usage not in the System Control range should be ignored. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1325354 Link: https://bugzilla.kernel.org/show_bug.cgi?id=28912 Link: https://github.com/ValveSoftware/steam-for-linux/issues/3384 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1325354 Link: https://bugzilla.kernel.org/show_bug.cgi?id=37982 Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-05HID: input: add mic mute key on HP slim keyboardAceLan Kao
Add MIC mute key which is found on HP Business Slim Keyboard T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 23 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=03f0 ProdID=2f4a Rev=00.10 S: Manufacturer=Chicony S: Product=HP Business Slim Keyboard C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-01-14Merge branches 'for-4.4/upstream-fixes', 'for-4.5/async-suspend', ↵Jiri Kosina
'for-4.5/container-of-cleanups', 'for-4.5/core', 'for-4.5/i2c-hid', 'for-4.5/logitech', 'for-4.5/multitouch', 'for-4.5/sony', 'for-4.5/upstream' and 'for-4.5/wacom' into for-linus
2015-12-18HID: input: ignore the battery in OKLICK Laser BTmouseAlexander E. Patrakov
This mouse, when asked about the battery, ceases to report movements and clicks. So just don't ask. Signed-off-by: Alexander E. Patrakov <patrakov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-20HID: Add vendor specific usage pages for Logitech G920Simon Wood
The Logitech G920 uses a couple of vendor specific usage pages, which results in incorrect number of axis/buttons being detected. This patch adds these pages to the 'ignore' list. Reported-by: Elias Vanderstuyft <elias.vds@gmail.com> Signed-off-by: Simon Wood <simon@mungewell.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-05HID: hid-input: allow input_configured callback return errorsDmitry Torokhov
When configuring input device via input_configured callback we may encounter errors (for example input_mt_init_slots() may fail). Instead of continuing with half-initialized input device let's allow driver indicate failures. Signed-off-by: Jaikumar Ganesh <jaikumarg@android.com> Signed-off-by: Arve Hjønnevåg <arve@android.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> Acked-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-01Merge branches 'for-4.2/upstream-fixes-devm-fixed' and 'for-4.3/upstream' ↵Jiri Kosina
into for-linus
2015-08-04HID: hid-input: Fix accessing freed memory during device disconnectKrzysztof Kozlowski
During unbinding the driver was dereferencing a pointer to memory already freed by power_supply_unregister(). Driver was freeing its internal description of battery through pointers stored in power_supply structure. However, because the core owns the power supply instance, after calling power_supply_unregister() this memory is freed and the driver cannot access these members. Fix this by storing the pointer to internal description of battery in a local variable before calling power_supply_unregister(), so the pointer remains valid. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reported-by: H.J. Lu <hjl.tools@gmail.com> Fixes: 297d716f6260 ("power_supply: Change ownership from driver to core") Cc: <stable@vger.kernel.org> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-07-10HID: input: call input_sync() when automatically releasing a keyDmitry Torokhov
We need to emit EV_SYN/SYN_REPORT between key press and release, otherwise userspace is allowed to "swallow" the event. [jkosina@suse.com: Dmitry says that he's observing this behavior with Plantronics headset] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-05-28HID: hid-input: Fix coding style issueJames C Boyd
This line is too long; split it up. Signed-off-by: James C Boyd <jcboyd.dev@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-28HID: hid-input: Simplify conditional expressionJames C Boyd
There are too many bangs in this conditional; therefore remove them while still maintaining the same logic. Signed-off-by: James C Boyd <jcboyd.dev@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-28HID: hid-input: Add parentheses to quell gcc warningJames C Boyd
GCC reports a -Wlogical-not-parentheses warning here; therefore add parentheses to shut it up and to express our intent more. Signed-off-by: James C Boyd <jcboyd.dev@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - quite a few firmware fixes for RMI driver by Andrew Duggan - huion and uclogic drivers have been substantially overlaping in functionality laterly. This redundancy is fixed by hid-huion driver being merged into hid-uclogic; work done by Benjamin Tissoires and Nikolai Kondrashov - i2c-hid now supports ACPI GPIO interrupts; patch from Mika Westerberg - Some of the quirks, that got separated into individual drivers, have historically had EXPERT dependency. As HID subsystem matured (as well as the individual drivers), this made less and less sense. This dependency is now being removed by patch from Jean Delvare - Logitech lg4ff driver received a couple of improvements for mode switching, by Michal Malý - multitouch driver now supports clickpads, patches by Benjamin Tissoires and Seth Forshee - hid-sensor framework received a substantial update; namely support for Custom and Generic pages is being added; work done by Srinivas Pandruvada - wacom driver received substantial update; it now supports i2c-conntected devices (Mika Westerberg), Bamboo PADs are now properly supported (Benjamin Tissoires), much improved battery reporting (Jason Gerecke) and pen proximity cleanups (Ping Cheng) - small assorted fixes and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits) HID: sensor: Update document for custom sensor HID: sensor: Custom and Generic sensor support HID: debug: fix error handling in hid_debug_events_read() Input - mt: Fix input_mt_get_slot_by_key HID: logitech-hidpp: fix error return code HID: wacom: Add support for Cintiq 13HD Touch HID: logitech-hidpp: add a module parameter to keep firmware gestures HID: usbhid: yet another mouse with ALWAYS_POLL HID: usbhid: more mice with ALWAYS_POLL HID: wacom: set stylus_in_proximity before checking touch_down HID: wacom: use wacom_wac_finger_count_touches to set touch_down HID: wacom: remove hardcoded WACOM_QUIRK_MULTI_INPUT HID: pidff: effect can't be NULL HID: add quirk for PIXART OEM mouse used by HP HID: add HP OEM mouse to quirk ALWAYS_POLL HID: wacom: ask for a in-prox report when it was missed HID: hid-sensor-hub: Fix sparse warning HID: hid-sensor-hub: fix attribute read for logical usage id HID: plantronics: fix Kconfig default HID: pidff: support more than one concurrent effect ...
2015-03-24HID: input: Fix NULL pointer dereference when power_supply_register failsKrzysztof Kozlowski
Do not call power_supply_powers() if power_supply_register() failed earlier. This fixes possible NULL pointer dereference by power_supply_powers() in such case. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-13power_supply: Change ownership from driver to coreKrzysztof Kozlowski
Change the ownership of power_supply structure from each driver implementing the class to the power supply core. The patch changes power_supply_register() function thus all drivers implementing power supply class are adjusted. Each driver provides the implementation of power supply. However it should not be the owner of power supply class instance because it is exposed by core to other subsystems with power_supply_get_by_name(). These other subsystems have no knowledge when the driver will unregister the power supply. This leads to several issues when driver is unbound - mostly because user of power supply accesses freed memory. Instead let the core own the instance of struct 'power_supply'. Other users of this power supply will still access valid memory because it will be freed when device reference count reaches 0. Currently this means "it will leak" but power_supply_put() call in next patches will solve it. This solves invalid memory references in following race condition scenario: Thread 1: charger manager Thread 2: power supply driver, used by charger manager THREAD 1 (charger manager) THREAD 2 (power supply driver) ========================== ============================== psy = power_supply_get_by_name() Driver unbind, .remove power_supply_unregister() Device fully removed psy->get_property() The 'get_property' call is executed in invalid context because the driver was unbound and struct 'power_supply' memory was freed. This could be observed easily with charger manager driver (here compiled with max17040 fuel gauge): $ cat /sys/devices/virtual/power_supply/cm-battery/capacity & $ echo "1-0036" > /sys/bus/i2c/drivers/max17040/unbind [ 55.725123] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 55.732584] pgd = d98d4000 [ 55.734060] [00000000] *pgd=5afa2831, *pte=00000000, *ppte=00000000 [ 55.740318] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 55.746210] Modules linked in: [ 55.749259] CPU: 1 PID: 2936 Comm: cat Tainted: G W 3.19.0-rc1-next-20141226-00048-gf79f475f3c44-dirty #1496 [ 55.760190] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 55.766270] task: d9b76f00 ti: daf54000 task.ti: daf54000 [ 55.771647] PC is at 0x0 [ 55.774182] LR is at charger_get_property+0x2f4/0x36c [ 55.779201] pc : [<00000000>] lr : [<c034b0b4>] psr: 60000013 [ 55.779201] sp : daf55e90 ip : 00000003 fp : 00000000 [ 55.790657] r10: 00000000 r9 : c06e2878 r8 : d9b26c68 [ 55.795865] r7 : dad81610 r6 : daec7410 r5 : daf55ebc r4 : 00000000 [ 55.802367] r3 : 00000000 r2 : daf55ebc r1 : 0000002a r0 : d9b26c68 [ 55.808879] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 55.815994] Control: 10c5387d Table: 598d406a DAC: 00000015 [ 55.821723] Process cat (pid: 2936, stack limit = 0xdaf54210) [ 55.827451] Stack: (0xdaf55e90 to 0xdaf56000) [ 55.831795] 5e80: 60000013 c01459c4 0000002a c06f8ef8 [ 55.839956] 5ea0: db651000 c06f8ef8 daebac00 c04cb668 daebac08 c0346864 00000000 c01459c4 [ 55.848115] 5ec0: d99eaa80 c06f8ef8 00000fff 00001000 db651000 c027f25c c027f240 d99eaa80 [ 55.856274] 5ee0: d9a06c00 c0146218 daf55f18 00001000 d99eaa80 db4c18c0 00000001 00000001 [ 55.864468] 5f00: daf55f80 c0144c78 c0144c54 c0107f90 00015000 d99eaab0 00000000 00000000 [ 55.872603] 5f20: 000051c7 00000000 db4c18c0 c04a9370 00015000 00001000 daf55f80 00001000 [ 55.880763] 5f40: daf54000 00015000 00000000 c00e53dc db4c18c0 c00e548c 0000000d 00008124 [ 55.888937] 5f60: 00000001 00000000 00000000 db4c18c0 db4c18c0 00001000 00015000 c00e5550 [ 55.897099] 5f80: 00000000 00000000 00001000 00001000 00015000 00000003 00000003 c000f364 [ 55.905239] 5fa0: 00000000 c000f1a0 00001000 00015000 00000003 00015000 00001000 0001333c [ 55.913399] 5fc0: 00001000 00015000 00000003 00000003 00000002 00000000 00000000 00000000 [ 55.921560] 5fe0: 7fffe000 be999850 0000a225 b6f3c19c 60000010 00000003 00000000 00000000 [ 55.929744] [<c034b0b4>] (charger_get_property) from [<c0346864>] (power_supply_show_property+0x48/0x20c) [ 55.939286] [<c0346864>] (power_supply_show_property) from [<c027f25c>] (dev_attr_show+0x1c/0x48) [ 55.948130] [<c027f25c>] (dev_attr_show) from [<c0146218>] (sysfs_kf_seq_show+0x84/0x104) [ 55.956298] [<c0146218>] (sysfs_kf_seq_show) from [<c0144c78>] (kernfs_seq_show+0x24/0x28) [ 55.964536] [<c0144c78>] (kernfs_seq_show) from [<c0107f90>] (seq_read+0x1b0/0x484) [ 55.972172] [<c0107f90>] (seq_read) from [<c00e53dc>] (__vfs_read+0x18/0x4c) [ 55.979188] [<c00e53dc>] (__vfs_read) from [<c00e548c>] (vfs_read+0x7c/0x100) [ 55.986304] [<c00e548c>] (vfs_read) from [<c00e5550>] (SyS_read+0x40/0x8c) [ 55.993164] [<c00e5550>] (SyS_read) from [<c000f1a0>] (ret_fast_syscall+0x0/0x48) [ 56.000626] Code: bad PC value [ 56.011652] ---[ end trace 7b64343fbdae8ef1 ]--- Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [for the nvec part] Reviewed-by: Marc Dietrich <marvin24@gmx.de> [for compal-laptop.c] Acked-by: Darren Hart <dvhart@linux.intel.com> [for the mfd part] Acked-by: Lee Jones <lee.jones@linaro.org> [for the hid part] Acked-by: Jiri Kosina <jkosina@suse.cz> [for the acpi part] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-13power_supply: Move run-time configuration to separate structureKrzysztof Kozlowski
Add new structure 'power_supply_config' for holding run-time initialization data like of_node, supplies and private driver data. The power_supply_register() function is changed so all power supply drivers need updating. When registering the power supply this new 'power_supply_config' should be used instead of directly initializing 'struct power_supply'. This allows changing the ownership of power_supply structure from driver to the power supply core in next patches. When a driver does not use of_node or supplies then it should use NULL as config. If driver uses of_node or supplies then it should allocate config on stack and initialize it with proper values. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> [for the nvec part] Reviewed-by: Marc Dietrich <marvin24@gmx.de> [for drivers/platform/x86/compal-laptop.c] Reviewed-by: Darren Hart <dvhart@linux.intel.com> [for drivers/hid/*] Reviewed-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-04HID: map telephony usage pageDmitry Torokhov
Currently HID code maps usages from telephony page into BTN_0, BTN_1, etc keys which get interpreted by mousedev and userspace as left/right/middle button clicks, which is not really helpful. This change adds mappings for usages that have corresponding input event definitions, and leaves the rest unmapped. This can be changed when there are userspace consumers for more telephony usages. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-09Merge branches 'for-3.19/upstream-fixes', 'for-3.20/apple', ↵Jiri Kosina
'for-3.20/betop', 'for-3.20/lenovo', 'for-3.20/logitech', 'for-3.20/rmi', 'for-3.20/upstream' and 'for-3.20/wacom' into for-linus
2015-01-06HID: fixup the conflicting keyboard mappings quirkJiri Kosina
The ignore check that got added in 6ce901eb61 ("HID: input: fix confusion on conflicting mappings") needs to properly check for VARIABLE reports as well (ARRAY reports should be ignored), otherwise legitimate keyboards might break. Cc: <stable@vger.kernel.org> Fixes: 6ce901eb61 ("HID: input: fix confusion on conflicting mappings") Reported-by: Fredrik Hallenberg <megahallon@gmail.com> Reported-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-01-06HID: apple: fix battery support for the 2009 ANSI wireless keyboardRoss Skaliotis
Enabled quirks necessary for correct battery capacity reporting. Cleaned up surrounding style. Signed-off-by: Ross Skaliotis <rskaliotis@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-01-06HID: input: fix confusion on conflicting mappingsDavid Herrmann
On an PC-101/103/104 keyboard (American layout) the 'Enter' key and its neighbours look like this: +---+ +---+ +-------+ | 1 | | 2 | | 5 | +---+ +---+ +-------+ +---+ +-----------+ | 3 | | 4 | +---+ +-----------+ On a PC-102/105 keyboard (European layout) it looks like this: +---+ +---+ +-------+ | 1 | | 2 | | | +---+ +---+ +-+ 4 | +---+ +---+ | | | 3 | | 5 | | | +---+ +---+ +-----+ (Note that the number of keys is the same, but key '5' is moved down and the shape of key '4' is changed. Keys '1' to '3' are exactly the same.) The keys 1-4 report the same scan-code in HID in both layouts, even though the keysym they produce is usually different depending on the XKB-keymap used by user-space. However, key '5' (US 'backslash'/'pipe') reports 0x31 for the upper layout and 0x32 for the lower layout, as defined by the HID spec. This is highly confusing as the linux-input API uses a single keycode for both. So far, this was never a problem as there never has been a keyboard with both of those keys present at the same time. It would have to look something like this: +---+ +---+ +-------+ | 1 | | 2 | | x31 | +---+ +---+ +-------+ +---+ +---+ +-----+ | 3 | |x32| | 4 | +---+ +---+ +-----+ HID can represent such a keyboard, but the linux-input API cannot. Furthermore, any user-space mapping would be confused by this and, luckily, no-one ever produced such hardware. Now, the HID input layer fixed this mess by mapping both 0x31 and 0x32 to the same keycode (KEY_BACKSLASH==0x2b). As only one of both physical keys is present on a hardware, this works just fine. Lets introduce hardware-vendors into this: ------------------------------------------ Unfortunately, it seems way to expensive to produce a different device for American and European layouts. Therefore, hardware-vendors put both keys, (0x31 and 0x32) on the same keyboard, but only one of them is hooked up to the physical button, the other one is 'dead'. This means, they can use the same hardware, with a different button-layout and automatically produce the correct HID events for American *and* European layouts. This is unproblematic for normal keyboards, as the 'dead' key will never report any KEY-DOWN events. But RollOver keyboards send the whole matrix on each key-event, allowing n-key roll-over mode. This means, we get a 0x31 and 0x32 event on each key-press. One of them will always be 0, the other reports the real state. As we map both to the same keycode, we will get spurious key-events, even though the real key-state never changed. The easiest way would be to blacklist 'dead' keys and never handle those. We could simply read the 'country' tag of USB devices and blacklist either key according to the layout. But... hardware vendors... want the same device for all countries and thus many of them set 'country' to 0 for all devices. Meh.. So we have to deal with this properly. As we cannot know which of the keys is 'dead', we either need a heuristic and track those keys, or we simply make use of our value-tracking for HID fields. We simply ignore HID events for absolute data if the data didn't change. As HID tracks events on the HID level, we haven't done the keycode translation, yet. Therefore, the 'dead' key is tracked independently of the real key, therefore, any events on it will be ignored. This patch simply discards any HID events for absolute data if it didn't change compared to the last report. We need to ignore relative and buffered-byte reports for obvious reasons. But those cannot be affected by this bug, so we're fine. Preferably, we'd do this filtering on the HID-core level. But this might break a lot of custom drivers, if they do not follow the HID specs. Therefore, we do this late in hid-input just before we inject it into the input layer (which does the exact same filtering, but on the keycode level). If this turns out to break some devices, we might have to limit filtering to EV_KEY events. But lets try to do the Right Thing first, and properly filter any absolute data that didn't change. This patch is tagged for 'stable' as it fixes a lot of n-key RollOver hardware. We might wanna wait with backporting for a while, before we know it doesn't break anything else, though. Cc: <stable@vger.kernel.org> Reported-by: Adam Goode <adam@spicenitz.org> Reported-by: Fredrik Hallenberg <megahallon@gmail.com> Tested-by: Fredrik Hallenberg <megahallon@gmail.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-17HID: add battery quirk for USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO keyboardKarl Relton
Apple bluetooth wireless keyboard (sold in UK) has always reported zero for battery strength no matter what condition the batteries are actually in. With this patch applied (applying same quirk as other Apple keyboards), the battery strength is now correctly reported. Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-12Merge branches 'for-3.19/hid-report-len', 'for-3.19/i2c-hid', ↵Jiri Kosina
'for-3.19/lenovo', 'for-3.19/logitech', 'for-3.19/microsoft', 'for-3.19/plantronics', 'for-3.19/rmi', 'for-3.19/sony' and 'for-3.19/wacom' into for-linus
2014-12-12Merge branches 'for-3.18/upstream-fixes' and 'for-3.19/upstream' into for-linusJiri Kosina
Conflicts: drivers/hid/hid-input.c
2014-12-01HID: make hid_report_len as a static inline function in hid.hMathieu Magnaudet
In several hid drivers it is necessary to calculate the length of an hid_report. This patch exports the existing static function hid_report_len of hid-core.c as an inline function in hid.h Signed-off-by: Mathieu Magnaudet <mathieu.magnaudet@enac.fr> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-29HID: input: Fix TransducerSerialNumber implementationJason Gerecke
The commit which introduced TransducerSerialNumber (368c966) is missing two crucial implementation details. Firstly, the commit does not set the type/code/bit/max fields as expected later down the code which can cause the driver to crash when a tablet with this usage is connected. Secondly, the call to 'set_bit' causes MSC_PULSELED to be sent instead of the expected MSC_SERIAL. This commit addreses both issues. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-22HID: input: Map unknown consumer page codes to KEY_UNKNOWNHans de Goede
Currently unknown consumer page codes are ignored, which means that they cannot later be mapped from userspace using udev / hwdb. Map them to KEY_UNKNOWN, so that userspace can remap them for keyboards which make up their own consumer page codes. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-20HID: add keyboard input assist hid usagesOlivier Gay
Add keyboard input assist controls usages from approved hid usage table request HUTTR42: http://www.usb.org/developers/hidpage/HUTRR42c.pdf Signed-off-by: Olivier Gay <ogay@logitech.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-26HID: input: force generic axis to be mapped to their user space axisBenjamin Tissoires
Atmel 840B digitizer presents a stylus interface which reports twice the X coordinate and then twice the Y coordinate. In its current implementation, hid-input assign the first X to X, then the second to Y, then the first Y to Z, then the second one to RX. This is wrong, and X should always be mapped to X, no matter what. A solution consists in forcing X, Y, Z, RX, RY, RZ to be mapped to their correct user space counter part. Reported-by: Éric Brunet <Eric.Brunet@lps.ens.fr> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-03HID: core: add two new usages for digitizerPing Cheng
On Feb 17, 2014, two new usages are approved to HID usage Table 18 - Digitizer Page: 5A Secondary Barrel Switch MC 16.4 5B Transducer Serial Number SV 16.3.1 This patch adds relevant definitions to hid/input. It also removes outdated comments in hid.h. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-28HID: add missing hid usagesOlivier Gay
Add some missing hid usages from consumer page, add some display brightness control usages from approved hid usage table request HUTTR41: http://www.usb.org/developers/hidpage/HUTRR41.pdf and add voice command usage from approved request HUTTR45: http://www.usb.org/developers/hidpage/Voice_Command_Usage.pdf [jkosina@suse.cz: removed KEY_BRIGHTNESS_TOGGLE / KEY_DISPLAYTOGGLE conflict from hid-debug.c] Signed-off-by: Olivier Gay <ogay@logitech.com> Signed-off-by: Mathieu Meisser <mmeisser@logitech.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-01Merge branch 'for-3.15/microsoft' into for-linusJiri Kosina
Conflicts: drivers/hid/hid-core.c
2014-04-01Merge branch 'for-3.15/hid-core-ll-transport-cleanup' into for-linusJiri Kosina
Conflicts: drivers/hid/hid-ids.h drivers/hid/hid-sony.c drivers/hid/i2c-hid/i2c-hid.c
2014-02-24HID: make .raw_request mandatoryBenjamin Tissoires
SET_REPORT and GET_REPORT are mandatory in the HID specification. Make the corresponding API in hid-core mandatory too, which removes the need to test against it in some various places. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-24HID: input: hid-input remove hid_output_raw_report callBenjamin Tissoires
hid_output_raw_report() is not a ll_driver callback and should not be used. To keep the same code path than before, we are forced to play with the different hid_hw_* calls: if the usb or i2c device does not support direct output reports, then we will rely on the SET_REPORT HID call. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-17HID: introduce helper to access hid_output_raw_report()Benjamin Tissoires
Add a helper to access hdev->hid_output_raw_report(). To convert the drivers, use the following snippets: for i in drivers/hid/*.c do sed -i.bak "s/[^ \t]*->hid_output_raw_report(/hid_output_raw_report(/g" $i done Then manually fix for checkpatch.pl Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-17HID: remove hid_get_raw_report in struct hid_deviceBenjamin Tissoires
dev->hid_get_raw_report(X) and hid_hw_raw_request(X, HID_REQ_GET_REPORT) are strictly equivalent. Switch the hid subsystem to the hid_hw notation and remove the field .hid_get_raw_report in struct hid_device. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-17HID: remove hidinput_input_event handlerBenjamin Tissoires
All the different transport drivers use now the generic event handling in hid-input. We can remove the handler definitively now. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-03HID: Add some missing HUT mappingsHans de Goede
Add mapping for "AL Next Task/Application", "AL Previous Task/Application" and "AL File Browser" buttons, as found on the Microsoft Office keyboard. Note that there already is a mapping for "AL Local Machine Browser" to KEY_FILE. Unless we ever encounter a device with both that should not be a problem. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-03HID: fix buffer allocationsBenjamin Tissoires
When using hid_output_report(), the buffer should be allocated by hid_alloc_report_buf(), not a custom malloc. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-20HID: input: fix input sysfs path for hid devicesBenjamin Tissoires
we used to set the parent of the input device as the parent of the hid bus. This was introduced when we created hid as a real bus, and to keep backward compatibility. Now, it's time to proper set the parent so that sysfs has an idea of which input device is attached to which hid device. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-18HID: Fix unit exponent parsing againNikolai Kondrashov
Revert some changes done in 774638386826621c984ab6994439f474709cac5e. Revert all changes done in hidinput_calc_abs_res as it mistakingly used "Unit" item exponent nibbles to affect resolution value. This wasn't breaking resolution calculation of relevant axes of any existing devices, though, as they have only one dimension to their units and thus 1 in the corresponding nible. Revert to reading "Unit Exponent" item value as a signed integer in hid_parser_global to fix reading specification-complying values. This fixes resolution calculation of devices complying to the HID standard, including Huion, KYE, Waltop and UC-Logic graphics tablets which have their report descriptors fixed by the drivers. Explanations follow. There are two "unit exponents" in HID specification and it is important not to mix them. One is the global "Unit Exponent" item and another is nibble values in the global "Unit" item. See 6.2.2.7 Global Items. The "Unit Exponent" value is just a signed integer and is used to scale the integer resolution unit values, so fractions can be expressed. The nibbles of "Unit" value are used to select the unit system (nibble 0), and presence of a particular basic unit type in the unit formula and its *exponent* (or power, nibbles 1-6). And yes, the latter is in two complement and zero means absence of the unit type. Taking the representation example of (integer) joules from the specification: [mass(grams)][length(centimeters)^2][time(seconds)^-2] * 10^-7 the "Unit Exponent" would be -7 (or 0xF9, if stored as a byte) and the "Unit" value would be 0xE121, signifying: Nibble Part Value Meaning ----- ---- ----- ------- 0 System 1 SI Linear 1 Length 2 Centimeters^2 2 Mass 1 Grams 3 Time -2 Seconds^-2 To give the resolution in e.g. hundredth of joules the "Unit Exponent" item value should have been -9. See also the examples of "Unit" values for some common units in the same chapter. However, there is a common misunderstanding about the "Unit Exponent" value encoding, where it is assumed to be stored the same as nibbles in "Unit" item. This is most likely due to the specification being a bit vague and overloading the term "unit exponent". This also was and still is proliferated by the official "HID Descriptor Tool", which makes this mistake and stores "Unit Exponent" as such. This format is also mentioned in books such as "USB Complete" and in Microsoft's hardware design guides. As a result many devices currently on the market use this encoding and so the driver should support them. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-13HID: validate feature and input report detailsBenjamin Tissoires
When dealing with usage_index, be sure to properly use unsigned instead of int to avoid overflows. When working on report fields, always validate that their report_counts are in bounds. Without this, a HID device could report a malicious feature report that could trick the driver into a heap overflow: [ 634.885003] usb 1-1: New USB device found, idVendor=0596, idProduct=0500 ... [ 676.469629] BUG kmalloc-192 (Tainted: G W ): Redzone overwritten CVE-2013-2897 Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-06Merge branches 'for-3.12/devm', 'for-3.12/i2c-hid', 'for-3.12/i2c-hid-dt', ↵Jiri Kosina
'for-3.12/logitech', 'for-3.12/multitouch-win8', 'for-3.12/trasnport-driver-cleanup', 'for-3.12/uhid', 'for-3.12/upstream' and 'for-3.12/wiimote' into for-linus
2013-09-02HID: battery: don't do DMA from stackJiri Kosina
Instead of using data from stack for DMA in hidinput_get_battery_property(), allocate the buffer dynamically. Cc: stable@kernel.org Reported-by: Richard Ryniker <ryniker@alum.mit.edu> Reported-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-31HID: input: generic hidinput_input_event handlerDavid Herrmann
The hidinput_input_event() callback converts input events written from userspace into HID reports and sends them to the device. We currently implement this in every HID transport driver, even though most of them do the same. This provides a generic hidinput_input_event() implementation which is mostly copied from usbhid. It uses a delayed worker to allow multiple LED events to be collected into a single output event. We use the custom ->request() transport driver callback to allow drivers to adjust the outgoing report and handle the request asynchronously. If no custom ->request() callback is available, we fall back to the generic raw output report handler (which is synchronous). Drivers can still provide custom hidinput_input_event() handlers (see logitech-dj) if the generic implementation doesn't fit their needs. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-04Merge branches 'for-3.11/multitouch', 'for-3.11/sony' and ↵Jiri Kosina
'for-3.11/upstream' into for-linus Conflicts: drivers/hid/hid-core.c
2013-06-19HID: explain out-of-range check betterJiri Kosina
Extend the comment explaining the condition for discarding out-of-range values to clarify the cases in which devices don't provide any logical min/max. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-06-19HID: fix false positive out of range valuesBenjamin Tissoires
Commit 6da7066906e977d42104a859c490f5f9a300488c introduced in 3.3 "HID: ignore absolute values which don't fit between logical min and max" prevents some Posiflex touch screen to work because they do not provide logical min and max for their buttons. Thus, logical min and max are at 0, discarding the buttons events, and preventing the device to report appropriate X Y. Adding a check on "min < max" solves the problem. Reported-by: Jan Kandziora <jjj@gmx.de> Tested-by: Jan Kandziora <jjj@gmx.de> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 12:15:27 +0000