summaryrefslogtreecommitdiff
path: root/drivers/hid/hid-core.c
AgeCommit message (Collapse)Author
2020-02-12HID: core: fix off-by-one memset in hid_report_raw_event()Johan Korsnes
In case a report is greater than HID_MAX_BUFFER_SIZE, it is truncated, but the report-number byte is not correctly handled. This results in a off-by-one in the following memset, causing a kernel Oops and ensuing system crash. Note: With commit 8ec321e96e05 ("HID: Fix slab-out-of-bounds read in hid_field_extract") I no longer hit the kernel Oops as we instead fail "controlled" at probe if there is a report too long in the HID report-descriptor. hid_report_raw_event() is an exported symbol, so presumabely we cannot always rely on this being the case. Fixes: 966922f26c7f ("HID: fix a crash in hid_report_raw_event() function.") Signed-off-by: Johan Korsnes <jkorsnes@cisco.com> Cc: Armando Visconti <armando.visconti@st.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-12-11HID: Fix slab-out-of-bounds read in hid_field_extractAlan Stern
The syzbot fuzzer found a slab-out-of-bounds bug in the HID report handler. The bug was caused by a report descriptor which included a field with size 12 bits and count 4899, for a total size of 7349 bytes. The usbhid driver uses at most a single-page 4-KB buffer for reports. In the test there wasn't any problem about overflowing the buffer, since only one byte was received from the device. Rather, the bug occurred when the HID core tried to extract the data from the report fields, which caused it to try reading data beyond the end of the allocated buffer. This patch fixes the problem by rejecting any report whose total length exceeds the HID_MAX_BUFFER_SIZE limit (minus one byte to allow for a possible report index). In theory a device could have a report longer than that, but if there was such a thing we wouldn't handle it correctly anyway. Reported-and-tested-by: syzbot+09ef48aa58261464b621@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-11-18HID: Improve Windows Precision Touchpad detection.Blaž Hrastnik
Per Microsoft spec, usage 0xC5 (page 0xFF) returns a blob containing data used to verify the touchpad as a Windows Precision Touchpad. 0x85, REPORTID_PTPHQA, // REPORT_ID (PTPHQA) 0x09, 0xC5, // USAGE (Vendor Usage 0xC5) 0x15, 0x00, // LOGICAL_MINIMUM (0) 0x26, 0xff, 0x00, // LOGICAL_MAXIMUM (0xff) 0x75, 0x08, // REPORT_SIZE (8) 0x96, 0x00, 0x01, // REPORT_COUNT (0x100 (256)) 0xb1, 0x02, // FEATURE (Data,Var,Abs) However, some devices, namely Microsoft's Surface line of products instead implement a "segmented device certification report" (usage 0xC6) which returns the same report, but in smaller chunks. 0x06, 0x00, 0xff, // USAGE_PAGE (Vendor Defined) 0x85, REPORTID_PTPHQA, // REPORT_ID (PTPHQA) 0x09, 0xC6, // USAGE (Vendor usage for segment #) 0x25, 0x08, // LOGICAL_MAXIMUM (8) 0x75, 0x08, // REPORT_SIZE (8) 0x95, 0x01, // REPORT_COUNT (1) 0xb1, 0x02, // FEATURE (Data,Var,Abs) 0x09, 0xC7, // USAGE (Vendor Usage) 0x26, 0xff, 0x00, // LOGICAL_MAXIMUM (0xff) 0x95, 0x20, // REPORT_COUNT (32) 0xb1, 0x02, // FEATURE (Data,Var,Abs) By expanding Win8 touchpad detection to also look for the segmented report, all Surface touchpads are now properly recognized by hid-multitouch. Signed-off-by: Blaž Hrastnik <blaz@mxxn.io> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-11-12HID: core: check whether Usage Page item is after Usage ID itemsCandle Sun
Upstream commit 58e75155009c ("HID: core: move Usage Page concatenation to Main item") adds support for Usage Page item after Usage ID items (such as keyboards manufactured by Primax). Usage Page concatenation in Main item works well for following report descriptor patterns: USAGE_PAGE (Keyboard) 05 07 USAGE_MINIMUM (Keyboard LeftControl) 19 E0 USAGE_MAXIMUM (Keyboard Right GUI) 29 E7 LOGICAL_MINIMUM (0) 15 00 LOGICAL_MAXIMUM (1) 25 01 REPORT_SIZE (1) 75 01 REPORT_COUNT (8) 95 08 INPUT (Data,Var,Abs) 81 02 ------------- USAGE_MINIMUM (Keyboard LeftControl) 19 E0 USAGE_MAXIMUM (Keyboard Right GUI) 29 E7 LOGICAL_MINIMUM (0) 15 00 LOGICAL_MAXIMUM (1) 25 01 REPORT_SIZE (1) 75 01 REPORT_COUNT (8) 95 08 USAGE_PAGE (Keyboard) 05 07 INPUT (Data,Var,Abs) 81 02 But it makes the parser act wrong for the following report descriptor pattern(such as some Gamepads): USAGE_PAGE (Button) 05 09 USAGE (Button 1) 09 01 USAGE (Button 2) 09 02 USAGE (Button 4) 09 04 USAGE (Button 5) 09 05 USAGE (Button 7) 09 07 USAGE (Button 8) 09 08 USAGE (Button 14) 09 0E USAGE (Button 15) 09 0F USAGE (Button 13) 09 0D USAGE_PAGE (Consumer Devices) 05 0C USAGE (Back) 0a 24 02 USAGE (HomePage) 0a 23 02 LOGICAL_MINIMUM (0) 15 00 LOGICAL_MAXIMUM (1) 25 01 REPORT_SIZE (1) 75 01 REPORT_COUNT (11) 95 0B INPUT (Data,Var,Abs) 81 02 With Usage Page concatenation in Main item, parser recognizes all the 11 Usages as consumer keys, it is not the HID device's real intention. This patch checks whether Usage Page is really defined after Usage ID items by comparing usage page using status. Usage Page concatenation on currently defined Usage Page will always do in local parsing when Usage ID items encountered. When Main item is parsing, concatenation will do again with last defined Usage Page if this page has not been used in the previous usages concatenation. Signed-off-by: Candle Sun <candle.sun@unisoc.com> Signed-off-by: Nianfu Bai <nianfu.bai@unisoc.com> Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-10-01HID: fix error message in hid_open_report()Michał Mirosław
On HID report descriptor parsing error the code displays bogus pointer instead of error offset (subtracts start=NULL from end). Make the message more useful by displaying correct error offset and include total buffer size for reference. This was carried over from ancient times - "Fixed" commit just promoted the message from DEBUG to ERROR. Cc: stable@vger.kernel.org Fixes: 8c3d52fc393b ("HID: make parser more verbose about parsing errors by default") Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-09-18HID: core: fix dmesg flooding if report field larger than 32bitJoshua Clayton
Only warn once of oversize hid report value field On HP spectre x360 convertible the message: hid-sensor-hub 001F:8087:0AC2.0002: hid_field_extract() called with n (192) > 32! (kworker/1:2) is continually printed many times per second, crowding out all else. Protect dmesg by printing the warning only one time. The size of the hid report field data structure should probably be increased. The data structure is treated as a u32 in Linux, but an unlimited number of bits in the USB hid spec, so there is some rearchitecture needed now that devices are sending more than 32 bits. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-06-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - regression fixes (reverts) for module loading changes that turned out to be incompatible with some userspace, from Benjamin Tissoires - regression fix for special Logitech unifiying receiver 0xc52f, from Hans de Goede - a few device ID additions to logitech driver, from Hans de Goede - fix for Bluetooth support on 2nd-gen Wacom Intuos Pro, from Jason Gerecke * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: logitech-dj: Fix 064d:c52f receiver support Revert "HID: core: Call request_module before doing device_add" Revert "HID: core: Do not call request_module() in async context" Revert "HID: Increase maximum report size allowed by hid_field_extract()" HID: a4tech: fix horizontal scrolling HID: hyperv: Add a module description line HID: logitech-hidpp: Add support for the S510 remote control HID: multitouch: handle faulty Elo touch device HID: wacom: Sync INTUOSP2_BT touch state after each frame if necessary HID: wacom: Correct button numbering 2nd-gen Intuos Pro over Bluetooth HID: wacom: Send BTN_TOUCH in response to INTUOSP2_BT eraser contact HID: wacom: Don't report anything prior to the tool entering range HID: wacom: Don't set tool type until we're in range HID: rmi: Use SET_REPORT request on control endpoint for Acer Switch 3 and 5 HID: logitech-hidpp: add support for the MX5500 keyboard HID: logitech-dj: add support for the Logitech MX5500's Bluetooth Mini-Receiver HID: i2c-hid: add iBall Aer3 to descriptor override
2019-06-05Revert "HID: core: Call request_module before doing device_add"Benjamin Tissoires
This reverts commit a025a18fecd4429f4ca66b1746001263c052ecbb. This patch and 4ceabaf79 are giving extended timeouts on boot for at least Ubuntu and openSUSE. Revert them until we get a better fix. Link: https://bugzilla.kernel.org/show_bug.cgi?id=203741 Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-06-05Revert "HID: core: Do not call request_module() in async context"Benjamin Tissoires
This reverts commit 4ceabaf7909d109db6afbffc4ed182741fc32043. This patch and a025a18fe are giving extended timeouts on boot for at least Ubuntu and openSUSE. Revert them until we get a better fix. Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-06-05Revert "HID: Increase maximum report size allowed by hid_field_extract()"Benjamin Tissoires
This reverts commit 94a9992f7dbdfb28976b565af220e0c4a117144a. The commit allows for more than 32 bits in hid_field_extract(), but the return value is a 32 bits int. So basically what this commit is doing is just silencing those legitimate errors. Revert to a previous situation in the hope that a proper fix will be impletemented. Fixes: 94a9992f7dbd ("HID: Increase maximum report size allowed by hid_field_extract()") Cc: stable@vger.kernel.org # v5.1 Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-06Merge branches 'for-5.1/upstream-fixes', 'for-5.2/core', 'for-5.2/ish', ↵Jiri Kosina
'for-5.2/logitech', 'for-5.2/macally', 'for-5.2/picolcd', 'for-5.2/sensor' and 'for-5.2/u2fzero' into for-linus
2019-04-24HID: input: make sure the wheel high resolution multiplier is setBenjamin Tissoires
Some old mice have a tendency to not accept the high resolution multiplier. They reply with a -EPIPE which was previously ignored. Force the call to resolution multiplier to be synchronous and actually check for the answer. If this fails, consider the mouse like a normal one. Fixes: 2dc702c991e377 ("HID: input: use the Resolution Multiplier for high-resolution scrolling") Link: https://bugzilla.redhat.com/show_bug.cgi?id=1700071 Reported-and-tested-by: James Feeney <james@nurealm.net> Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-05HID: core: Do not call request_module() in async contextHans de Goede
request_module() may not be called form async context and in some cases hid devices may be added from an async context. One example of this happening is under hyperv, where this was triggering a WARN_ON in request_module(): [ 11.174497] hid_add_device+0xee/0x2b0 [hid] [ 11.174499] mousevsc_probe+0x223/0x2eb [hid_hyperv] [ 11.174501] vmbus_probe+0x3a/0x90 [ 11.174504] really_probe+0x229/0x420 [ 11.174506] driver_probe_device+0x115/0x130 [ 11.174507] __driver_attach_async_helper+0x87/0x90 [ 11.174509] async_run_entry_fn+0x37/0x150 This commit skips the request_module(), falling back to the old behavior of letting userspace deal with this, in case we are called from an async context. Cc: Lili Deng <v-lide@microsoft.com> Reported-by: Lili Deng <v-lide@microsoft.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-02HID: core: Call request_module before doing device_addHans de Goede
Recent kernels allow the generic-hid driver to be used as fallback for devices with a specialized driver, when the hiddev is not listed in hid_have_special_driver. Over time we are removing more and more devices from the hid_have_special_driver table as devices get tested to support this setup. Before this commit the following happens when a HID device which has a special-driver and is no longer listed in hid_have_special_driver, gets enumerated: 1) device_add() gets called 2) bus_add_device() looks for a matching already registered hid driver, and bind hid-generic to the new device 3) kobject_uevent(&dev->kobj, KOBJ_ADD) gets called notifying userspace of the new hid_dev. udev calls modprobe based on the modalias in the uevent 4) The special driver gets loaded by modprobe 5) __hid_bus_reprobe_drivers() unbinds hid-generic and binds the new driver There are a couple of downsides to this: a) The probing messages printend when a HID driver bounds show up twice in dmesg, which is confusing for the user b) The (un)binding typically causes one or more evdev device-nodes to get (un)registered firing of udev events to which e.g. the xserver responds by (un)registering xinput devices and reporting this to interested clients. IOW the i. bind generic, ii. unbind generic, iii. bind special driver dance sets in motion a whole chain of events each step, while we really only want the events from step iii. to be reported to userspace. This commits introduces a request_module call before the device_add() call, so that the special-driver is loaded when step 2) looks for a matching driver and we directly bind the specialized driver. Note the request_module call translates to an execve("/sbin/modprobe", ...) and we now do this for each HID device added. So this is not entirely free, but adding HID devices is not something which happens 100s of times a second, so this should be fine. Signed-off-by: Hans de Goede <hdegoede@redhat.com> [bentiss: fixed typo in commit message found by checkpatch.pl] Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-02HID: core: move Usage Page concatenation to Main itemNicolas Saenz Julienne
As seen on some USB wireless keyboards manufactured by Primax, the HID parser was using some assumptions that are not always true. In this case it's s the fact that, inside the scope of a main item, an Usage Page will always precede an Usage. The spec is not pretty clear as 6.2.2.7 states "Any usage that follows is interpreted as a Usage ID and concatenated with the Usage Page". While 6.2.2.8 states "When the parser encounters a main item it concatenates the last declared Usage Page with a Usage to form a complete usage value." Being somewhat contradictory it was decided to match Window's implementation, which follows 6.2.2.8. In summary, the patch moves the Usage Page concatenation from the local item parsing function to the main item parsing function. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Terry Junge <terry.junge@poly.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-03-18HID: Increase maximum report size allowed by hid_field_extract()Kai-Heng Feng
Commit 71f6fa90a353 ("HID: increase maximum global item tag report size to 256") increases the max report size from 128 to 256. We also need to update the report size in hid_field_extract() otherwise it complains and truncates now valid report size: [ 406.165461] hid-sensor-hub 001F:8086:22D8.0002: hid_field_extract() called with n (192) > 32! (kworker/5:1) BugLink: https://bugs.launchpad.net/bugs/1818547 Fixes: 71f6fa90a353 ("HID: increase maximum global item tag report size to 256") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-16HID: core: simplify active collection trackingPhilipp Zabel
Manually tracking an active collection to set collection parents is not necessary, we just have to look one step back into the collection stack to find the correct parent. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-01-10HID: core: replace the collection tree pointers with indicesPeter Hutterer
Previously, the pointer to the parent collection was stored. If a device exceeds 16 collections (HID_DEFAULT_NUM_COLLECTIONS), the array to store the collections is reallocated, the pointer to the parent collection becomes invalid. Replace the pointers with an index-based lookup into the collections array. Fixes: c53431eb696f3c ("HID: core: store the collections as a basic tree") Reported-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Tested-by: Kyle Pelton <kyle.d.pelton@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-12-07HID: core: process the Resolution MultiplierPeter Hutterer
The Resolution Multiplier is a feature report that modifies the value of Usages within the same Logical Collection. If the multiplier is set to anything but 1, the hardware reports (value * multiplier) for the same amount of physical movement, i.e. the value we receive in the kernel is pre-multiplied. The hardware may either send a single (value * multiplier), or by sending multiplier as many reports with the same value, or a combination of these two options. For example, when the Microsoft Sculpt Ergonomic mouse Resolution Multiplier is set to 12, the Wheel sends out 12 for every detent but AC Pan sends out a value of 3 at 4 times the frequency. The effective multiplier is based on the physical min/max of the multiplier field, a logical min/max of [0,1] with a physical min/max of [1,8] means the multiplier is either 1 or 8. The Resolution Multiplier was introduced for high-resolution scrolling in Windows Vista and is commonly used on Microsoft mice. The recommendation for the Resolution Multiplier is to default to 1 for backwards compatibility. This patch adds an arbitrary upper limit at 255. The only known use case for the Resolution Multiplier is for scroll wheels where the multiplier has to be a fraction of 120 to work with Windows. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Verified-by: Harry Cutts <hcutts@chromium.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2018-12-07HID: core: store the collections as a basic treePeter Hutterer
For each collection parsed, store a pointer to the parent collection (if any). This makes it a lot easier to look up which collection(s) any given item is part of Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Verified-by: Harry Cutts <hcutts@chromium.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2018-10-23Merge branch 'for-4.20/core' into for-linusJiri Kosina
Fixes and new features for driver core. Highlights: - maximum global item tag report size gets increased to 256 - improved INPUT_PROP reporting for Digitizer devices
2018-09-05HID: core: fix NULL pointer dereferenceGustavo A. R. Silva
There is a NULL pointer dereference in case memory resources for *parse* are not successfully allocated. Fix this by adding a new goto label and make the execution path jump to it in case vzalloc() fails. Addresses-Coverity-ID: 1473081 ("Dereference after null check") Fixes: b2dd9f2e5a8a ("HID: core: fix memory leak on probe") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-08-28HID: core: fix memory leak on probeStefan Agner
The dynamically allocted collection stack does not get freed in all situations. Make sure to also free the collection stack when using the parser in hid_open_report(). Fixes: 08a8a7cf1459 ("HID: core: do not upper bound the collection stack") Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-08-28HID: increase maximum global item tag report size to 256Song, Hongyan
The maximum globale report size has changed from 32->...->96->128 in the past years. With the development usage of HID, the report_size max value 128 cannot satisfy all requirements. There are applications need to expose intrinsic metadata to camera stabilizing applications such as 3DFE application. 3DFE intrinsic is designed to express environmental information about sensor that may dynamically change while the sensor is running (such data include noise spectral density, bias standard deviation) A sensor data field is SENSOR_VALUE_PAIR that consists of a PROPERTYKEY and PROPVARIANT pair. It need to report a unique PROPERTYKEY for each data field. Take “Noise Spectral Density” as an example, it report count will be defined as below: "Size of Property key GUID(16 Byte) + property key index(4 Byte) + size of Noise Spectral Density value(4 Byte)" In this case, the data report max is totally 192(24Byte), which is larger than 128, while max size 128 blocked it as illegal length. So increase the report size to satisfy it and more demands in the future. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-08-20Merge branch 'for-4.19/multitouch-multiaxis' into for-linusJiri Kosina
Multitouch updates: - Dial support - Palm rejection for touchscreens - a few small assorted fixes
2018-07-23HID: cougar: make compare_device_paths reusableDaniel M. Lambea
The function compare_device_paths from wacom_sys.c is generic and useful for other drivers. Move the function to hid-core and rename it as hid_compare_device_paths. Signed-off-by: Daniel M. Lambea <dmlambea@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-07-17HID: core: do not upper bound the collection stackBenjamin Tissoires
Looks like 4 was sufficient until now. However, the Surface Dial needs a stack of 5 and simply fails at probing. Dynamically add HID_COLLECTION_STACK_SIZE to the size of the stack if we hit the upper bound. Checkpatch complains about bare unsigned, so converting those to 'unsigned int' in struct hid_parser Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-07-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - spectrev1 pattern fix in hiddev from Gustavo A. R. Silva - bounds check fix for hid-debug from Daniel Rosenberg - regression fix for HID autobinding from Benjamin Tissoires - removal of excessive logging from i2c-hid driver from Jason Andryuk - fix specific to 2nd generation of Wacom Intuos devices from Jason Gerecke * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hiddev: fix potential Spectre v1 HID: i2c-hid: Fix "incomplete report" noise HID: wacom: Correct touch maximum XY of 2nd-gen Intuos HID: debug: check length before copy_to_user() HID: core: allow concurrent registration of drivers
2018-06-25HID: core: allow concurrent registration of driversBenjamin Tissoires
Detected on the Dell XPS 9365. The laptop has 2 devices that benefit from the hid-generic auto-unbinding. When those 2 devices are presented to the userspace, udev loads both wacom and hid-multitouch. When this happens, the code in __hid_bus_reprobe_drivers() is called concurrently and the second device gets reprobed twice. An other bug in the power_supply subsystem prevent to remove the wacom driver if it just finished its initialization, which basically kills the wacom node. [jkosina@suse.cz: reformat changelog a bit] Fixes c17a7476e4c4 ("HID: core: rewrite the hid-generic automatic unbind") Cc: stable@vger.kernel.org # v4.17 Tested-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-08Merge branch 'for-4.18/multitouch' into for-linusJiri Kosina
- improvement of duplicate usage handling in hid-input from Benjamin Tissoires - Win 8.1 precisioun touchpad spec implementation from Benjamin Tissoires
2018-05-16HID: core: fix hid_hw_open() commentHisao Tanabe
Fix comment typo for hid_hw_open(). [jkosina@suse.cz: write at least some changelog] Signed-off-by: Hisao Tanabe <xtanabe@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-26HID: generic: create one input report per application typeBenjamin Tissoires
It is not a good idea to try to fit all types of applications in the same input report. There are a lot of devices that are needing the quirk HID_MULTI_INPUT but this quirk doesn't match the actual HID description as it is based on the report ID. Given that most devices with MULTI_INPUT I can think of split nicely the devices inputs into application, it is a good thing to split the devices by default based on this assumption. Also make hid-multitouch following this rule, to not have to deal with too many input created. While we are at it, fix some checkpatch complaints about converting 'unsigned' to 'unsigned int'. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-05Merge branch 'for-4.17/upstream' into for-linusJiri Kosina
Pull a few small generic code cleanups.
2018-04-05Merge branch 'for-4.17/multitouch' into for-linusJiri Kosina
Pull Razer Blade Stealth support improvement and a few generic cleanups
2018-03-23HID: core: reset the quirks before calling probe againBenjamin Tissoires
Given that now the quirk handling is done in hid-quirk.c, we can actually reset the quirks before calling .probe(), so that the drivers do not need to keep track of initial quirks. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-03-06HID: core: rewrite the hid-generic automatic unbindBenjamin Tissoires
We actually can have the unbind/rebind logic in hid-core.c, leaving only the match function in hid-generic. This makes hid-generic simpler and the whole logic simpler too. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-02-16HID: core: Fix size as type u32Aaron Ma
When size is negative, calling memset will make segment fault. Declare the size as type u32 to keep memset safe. size in struct hid_report is unsigned, fix return type of hid_report_len to u32. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-01-31Merge branch 'for-4.16/hid-quirks-cleanup/_base' into for-linusJiri Kosina
This series from Benjamin Tissoires finally removes one of the big PITAs in the hid-core, which is the absolute need of having added all the new device IDs into the horrid hid_have_special_driver[]
2017-12-07HID: core: lower log level for unknown main item tags to warningsHans de Goede
Given all the effort distros have done with splash-screens to give users a nice clean boot experience, we really want dmesg --level=err to not print anything unless there is a real problem with either the hardware or the kernel. Buggy HID descriptors unfortunately happen all too often, so lower the log level to warning keep the console clear of error messages such as: [ 441.079664] apple 0005:05AC:0239.0003: unknown main item tag 0x0 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-21HID: core: remove the absolute need of hid_have_special_driver[]Benjamin Tissoires
Most HID devices behave properly when they are used with hid-generic. Since kernel v4.12, we do not poll for input reports at plug in, so hid-generic should behave properly with all HID devices. There has been a long standing list of HID devices that have a special driver. It used to be just a few, but with time, this list went too big, and we can not ask users to know which HID special driver will pick up their device. We can teach hid-generic to be nice with others. If a device is not explicitly marked with HID_QUIRK_HAVE_SPECIAL_DRIVER, we can allow hid-generic to pick up the device as long as no other loaded HID driver will match the device. When the special driver appears, hid-generic can step back and let the special driver handling the device. In case this special driver is removed, this good old pal of hid-generic will rebind to the device. This basically makes the list hid_have_special_driver[] useless. It still allows to not see a hid-generic driver bound and removed during boot, so we can keep it around. This will also help other people to have a special HID driver without the need of recompiling hid-core. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-21HID: core: move the list of ignored devices in hid-quirks.cBenjamin Tissoires
Better having all the devices quirks in one place. Note that this change introduces an initial lookup for the device in hid_gets_squirk(), which should not theoretically be required, but which actually allows to not have to reparse the list of ignored devices if we call hid_lookup_quirks twice. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-21HID: quirks: move the list of special devices into a quirkBenjamin Tissoires
It is better to centralize the information of special devices in one single file. Instead of manually parsing the list of devices that have a special driver or those that need to be ignored, introduce HID_QUIRK_HAVE_SPECIAL_DRIVER and set the correct quirks while fetching those quirks. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-21HID: core: move the dynamic quirks handling in coreBenjamin Tissoires
usbhid has a list of dynamic quirks in addition to a list of static quirks. There is not much USB specific in that, so move this part of the module in core so we can have one central place for quirks. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-15Merge branch 'for-4.15/upstream' into for-linusJiri Kosina
- cp2112: GPIO error handling and Kconfig fixes from Sébastien Szymanski - i2c-hid: fixup / quirk for Apollo-Lake based laptops, from Hans de Goede - Input/Core: add eraser tool support, from Ping Cheng - small assorted code fixes Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-15Merge branch 'for-4.15/asus' into for-linusJiri Kosina
- Asus laptop fixes (fn keys, backlight), from Mustafa Kuscu and Maxime Bellengé
2017-11-15Merge branch 'for-4.15/alps' into for-linusJiri Kosina
- New ALPS touchpad (T4, found currently on HP EliteBook 1000, Zbook Stduio and HP Elite book x360) support from Masaki Ota
2017-11-07HID: Add ID 044f:b605 ThrustMaster, Inc. force feedback Racing WheelViktor Chapliev
Add ID 044f:b605 ThrustMaster, Inc. force feedback Racing Wheel Signed-off-by: Viktor Chapliev <viktor-tch@yandex.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-10-17HID: alps: add new U1 device IDMasaki Ota
Add new U1 device Product ID This device is used on HP Elite book x360 series. [jkosina@suse.cz: update changelog] Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 18:06:31 +0000