summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2011-09-18drm/radeon/kms: Make GPU/CPU page size handling consistent in blit code (v2)Alex Deucher
The BO blit code inconsistenly handled the page size. This wasn't an issue on system with 4k pages since the GPU's page size is 4k as well. Switch the driver blit callbacks to take num pages in GPU page units. Fixes lemote mipsel systems using AMD rs780/rs880 chipsets. v2: incorporate suggestions from Michel. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-18drm/radeon/kms: fix typo in r100_blit_copyAlex Deucher
cur_pages is the number of pages per loop iteration. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-14drm/radeon: Unreference GEM object outside of spinlock in page flip error path.Michel Dänzer
Should fix https://bugzilla.redhat.com/show_bug.cgi?id=726277 . Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-14drm/radeon: Don't read from CP ring write pointer registers.Michel Dänzer
Apparently this doesn't always work reliably, e.g. at resume time. Just initialize to 0, so the ring is considered empty. Tested with hibernation on Sumo and Cayman cards. Should fix https://bugs.launchpad.net/ubuntu/+source/linux/+bug/820746/ . Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-14drm/ttm: request zeroed system memory pages for new TT buffer objectsBen Skeggs
Fixes an information leak to userspace, we were handing out un-zeroed pages for any newly created TTM_PL_TT buffer. Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Tested-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-09drm: Remove duplicate "return" statementLin Ming
Remove the duplicate "return" statement in drm_fb_helper_panic(). Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-09Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-test * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nv04/crtc: Bail out if FB is not bound to crtc drm/nouveau: fix nv04_sgdma_bind on non-"4kB pages" archs drm/nouveau: properly handle allocation failure in nouveau_sgdma_populate drm/nouveau: fix oops on pre-semaphore hardware drm/nv50/crtc: Bail out if FB is not bound to crtc
2011-09-09drm/nv04/crtc: Bail out if FB is not bound to crtcEmil Velikov
This commit resolves a possible 'NULL pointer dereference' It uses the same approach as radeon, intel and nouveau/nv50 Fixes bug 'Nouveau: Kernel oops when unplugging external monitor' https://bugs.freedesktop.org/show_bug.cgi?id=40336 Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-09-09drm/nouveau: fix nv04_sgdma_bind on non-"4kB pages" archsMarcin Slusarz
nv04_sgdma_bind binds the same page multiple times on architectures where PAGE_SIZE != 4096. Let's fix it. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-09-09drm/nouveau: properly handle allocation failure in nouveau_sgdma_populateMarcin Slusarz
Not cleaning after alloc failure would result in crash on destroy, because nouveau_sgdma_clear assumes "ttm_alloced" to be not null when "pages" is not null. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: stable@kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-09-09drm/nouveau: fix oops on pre-semaphore hardwareBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-09-09drm/nv50/crtc: Bail out if FB is not bound to crtcEmil Velikov
Fixes possbile NULL pointer dereference Resolves 'kernel crash in nv50_crtc_do_mode_set_base during shutdown' https://bugs.freedesktop.org/show_bug.cgi?id=40005 Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-09-06drm/radeon/kms: fix DP detect and EDID fetch for DP bridgesAlex Deucher
Sink type is always DP for DP bridges and EDID fetch on DP bridges is always i2c over aux rather than plain i2c. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-02drm/radeon/kms: make sure pci max read request size is valid on evergreen+ (v2)Alex Deucher
If the bios or OS sets the pci max read request size to 0 or an invalid value (6,7), it can result in a hang or slowdown. Check and set it to something sane if it's invalid. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=42162 v2: use pci reg defines from include/linux/pci_regs.h Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-31drm/radeon/kms: set a default max_pixel_clockDave Airlie
On some Power rv100 cards, we have no ATY OF table, but we have no combios table either, and hence we refuse all modes on VGA-0 since we end up with a 0 max pixel clock. Signed-off-by: Dave Airlie <airlied@redhat.com> Cc: stable@kernel.org Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2011-08-30drm/radeon/kms: add s/r quirk for Compaq Presario V5245EUAlex Deucher
Fixes resume on Compaq Presario V5245EU. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=41642 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-30drm/radeon/kms: evergreen & ni reset SPI block on CP resumeJerome Glisse
For some reason SPI block is in broken state after module unloading. This lead to broken rendering after reloading module. Fix this by reseting SPI block in CP resume function Signed-off-by: Jerome Glisse <jglisse@redhat.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-29drm: Fix the number of connector and encoder to cleanup functionsJoonyoung Shim
It is left out the code to decrease the number of connector and encoder to the cleanup functions. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-26Merge branch 'drm-intel-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: drm/i915: Fix wrong initializer for "locked" variable in assert_panel_unlocked i915: do not setup intel_backlight twice
2011-08-25drm/i915: Fix wrong initializer for "locked" variable in assert_panel_unlockedThomas Jarosch
Otherwise it just contains random memory. Issue detected by cppcheck. Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-23drm/radeon: Extended DDC Probing for Toshiba L300D Radeon Mobility X1100 ↵Thomas Reim
HDMI-A Connector Toshiba Satellite L300D with ATI Mobility Radeon X1100 sends data to i2c bus for a HDMI connector that is not implemented/existent on the notebook's board. Fix by applying extented DDC probing for this connector. Requires [PATCH] drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC Lines Tested for kernel 2.6.38 on Toshiba Satellite L300D notebook BugLink: http://bugs.launchpad.net/bugs/826677 Signed-off-by: Thomas Reim <reimth@gmail.com> Acked-by: Chris Routh <routhy@gmail.com> Cc: <stable@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-23drm/ttm: ensure ttm for new node is bound before calling move_notify()Ben Skeggs
This was true for new TTM_PL_SYSTEM and new TTM_PL_TT cases, but wasn't the case on TTM_PL_SYSTEM<->TTM_PL_TT moves, which causes trouble on some paths as nouveau's move_notify() hook requires that the dma addresses be valid at this point. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-23drm/ttm: unbind ttm before destroying node in accel move cleanupBen Skeggs
Nouveau makes the assumption that if a TTM is bound there will be a mm_node around for it and the backwards ordering here resulted in a use-after-free on some eviction paths. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-23drm/ttm: fix ttm_bo_add_ttm(user) failure pathMarcin Slusarz
ttm_tt_destroy kfrees passed object, so we need to nullify a reference to it. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: stable@kernel.org Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-22i915: do not setup intel_backlight twiceKamal Mostafa
The commit "Not all systems expose a firmware or platform mechanism for changing the backlight intensity on i915, so add native driver support" adds calls to intel_panel_setup_backlight() from intel_{lvds,dp}_init so do not call it again from intel_setup_outputs(). BugLink: http://bugs.launchpad.net/bugs/831542 Signed-off-by: Kamal Mostafa <kamal@canonical.com> ACKed-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-22drm/radeon: Make vramlimit parameter actually work.Michel Dänzer
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-22drm/radeon: Explicitly print GTT/VRAM offsets on test failure.Michel Dänzer
Otherwise these would need to be painstakingly calculated looking at the source code. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-22drm/radeon: Take IH ring into account for test size calculation.Michel Dänzer
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-22drm/radeon/alpha: Add Alpha support to Radeon DRM codeJay Estabrook
Alpha needs to have available the system bus address for the Radeon's local memory, so that it can be used in ttm_bo_vm_fault(), when building the PTEs for accessing that VRAM. So, we make bus.addr hold the ioremap() return, and then we can modify bus.base appropriately for use during page fault processing. Signed-off-by: Jay Estabrook <jay.estabrook@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel: drm/i915: set GFX_MODE to pre-Ivybridge default value even on Ivybridge
2011-08-19drm/i915: set GFX_MODE to pre-Ivybridge default value even on IvybridgeJesse Barnes
Prior to Ivybridge, the GFX_MODE would default to 0x800, meaning that MI_FLUSH would flush the TLBs in addition to the rest of the caches indicated in the MI_FLUSH command. However starting with Ivybridge, the register defaults to 0x2800 out of reset, meaning that to invalidate the TLB we need to use PIPE_CONTROL. Since we're not doing that yet, go back to the old default so things work. v2: don't forget to actually *clear* the new bit Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-15Merge branch 'drm-intel-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: drm/i915: Cannot set clock gating under UMS drm/i915: Can't do accurate vblank timestamps with UMS Not all systems expose a firmware or platform mechanism for changing the backlight intensity on i915, so add native driver support. drm/i915: split out PCH refclk update code drm/i915: show interrupt info on IVB drm/i915: Remove unused 'reg' argument to dp_pipe_enabled drm/i915: Fix PCH port pipe select in CPT disable paths drm/i915: Leave LVDS registers unlocked drm/i915: Wait for LVDS panel power sequence
2011-08-15drm/i915: Cannot set clock gating under UMSKeith Packard
The clock gating functions are only assigned under KMS, so don't try to call them under UMS. Signed-off-by: Keith Packard <keithp@keithp.com> Tested-by: Justin P. Mattock <justinmattock@gmail.com>
2011-08-15drm/i915: Can't do accurate vblank timestamps with UMSKeith Packard
Disable this feature when KMS is not running by setting the driver->get_vblank_timestamp function pointer to NULL. Signed-off-by: Keith Packard <keithp@keithp.com> Tested-by: Justin P. Mattock <justinmattock@gmail.com>
2011-08-15Not all systems expose a firmware or platform mechanism for changing the ↵Matthew Garrett
backlight intensity on i915, so add native driver support. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Airlie <airlied@linux.ie> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> Tested-by: Michel Alexandre Salim <salimma@fedoraproject.org> Tested-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-15drm/radeon/kms: don't try to be smart in the hpd handlerAlex Deucher
Attempting to try and turn off disconnected display hw in the hotput handler lead to more problems than it helped. For now just register an event and only attempt the do something interesting with DP. Other connectors are just too problematic: - Some systems have an HPD pin assigned to LVDS, but it's rarely if ever connected properly and we don't really care about hpd events on LVDS anyway since it's always connected. - The HPD pin is wired up correctly for eDP, but we don't really have to do anything since the events since it's always connected. - Some HPD pins fire more than once when you connect/disconnect - etc. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=39882 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-12drm/radeon: re-POST the asic on Apple hardware when booted via EFIMatthew Garrett
At least some Apples program the GPU into a state that wedges the engine once userspace starts trying to perform accelerated operations. Executing the Atom init scripts gets the hardware back into a working state. The same hardware works fine when booted via BIOS emulation, so let's just execute the init scripts on Apples when we're using EFI. Signed-off-by: Matthew Garrett <mjg@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-12drm/radeon: Allow panel preferred EDID to override BIOS native modeMatthew Garrett
We have two sources of information about panel capabilities on mobile radeon - the BIOS, which gives us a native mode, and the panel's preferred mode. In theory these two will always match, but there's some corner cases where the BIOS hasn't been fully initialised and so the native mode in it ends up with default values. However, if we get a panel with reasonable EDID, it's probably the case that the panel's preferred mode does actually represent the panel capabilities. This patch handles that case by replacing the native mode with the panel's preferred mode if the resolutions don't match. Systems without a valid internal panel EDID will still use the BIOS native mode. Signed-off-by: Matthew Garrett <mjg@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-12drm/radeon/kms: make some watermark messages debug onlyAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-12drm/radeon/kms: fix regression is handling >2 heads on cedar/caicosAlex Deucher
Need to add support for 4 crtcs when setting the possible crtcs for the encoders. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-12drm/radeon/kms: don't enable connectors that are off in the hotplug handlerAlex Deucher
If we get a hotplug event on an connector that is off, don't attempt to turn it on or off, it should already be off. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=728228 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-09drm/i915: split out PCH refclk update codeJesse Barnes
We ought to be calling this from our DPMS routines as well as global state may change and we need to enable/disable clocks. So split out the code in preparation for further changes. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-09drm/i915: show interrupt info on IVBJesse Barnes
IVB uses the same interrupt reg layout as SNB, so add an IS_GEN7 to the interrupt debugfs file. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-08drm/i915: Remove unused 'reg' argument to dp_pipe_enabledKeith Packard
Just an extra parameter which isn't actually needed. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-08drm/i915: Fix PCH port pipe select in CPT disable pathsKeith Packard
CPT pipe select is different from previous generations (using two bits instead of one). All of the paths from intel_disable_pch_ports were not making this distinction. Mode setting with pipe A turned off would then also force all outputs on pipe B to get turned off as the disable code would mistakenly decide that all of these outputs were on pipe A and turn them off. This is an extension of the CPT DP disable fix (why didn't I fix this then?) Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-08drm/i915: Leave LVDS registers unlockedKeith Packard
There's no reason to relock them; it just makes operations more complex. This fixes DPMS where the panel registers were locked making the disable not work. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-08drm/i915: Wait for LVDS panel power sequenceKeith Packard
During mode setting, check to make sure the panel power sequencing has completed before doing further operations on the device. This uncovered errors with DPMS not turning the device off as it was left locked. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-05Revert "drm/i915: Try enabling RC6 by default (again)"Dave Airlie
This reverts commit 4e20fa65a3ea789510eed1a15deb9e8aab2b8202. Francesco Allertsen still has a broken configuration. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm/radeon: Extended DDC Probing for ECS A740GM-M DVI-D ConnectorThomas Reim
ECS A740GM-M with ATI RADEON 2100 sends data to i2c bus for a DVI connector that is not implemented/existent on the board. Fix by applying extented DDC probing for this connector. Requires [PATCH] drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC Lines Tested for kernel 2.6.38 on Asus ECS A740GM-M board BugLink: http://bugs.launchpad.net/bugs/810926 Cc: <stable@kernel.org> Signed-off-by: Thomas Reim <reimth@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm/radeon: Log Subsystem Vendor and Device InformationThomas Reim
Log PCI subsystem vendor and subsystem device ID in addition to PCI vendor and device ID during kernel mode initialisation. This helps to better identify radeon devices of third-party vendors, e. g. for bug analysis. Tested for kernel 2.6.35, 2.6.38 and 3.0 on Asus M2A-VM HDMI board Cc: <stable@kernel.org> Signed-off-by: Thomas Reim <reimth@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 19:04:07 +0000