summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2016-08-09drm/cirrus: Fix NULL pointer dereference when registering the fbdevBoris Brezillon
cirrus_modeset_init() is initializing/registering the emulated fbdev and, since commit c61b93fe51b1 ("drm/atomic: Fix remaining places where !funcs->best_encoder is valid"), DRM internals can access/test some of the fields in mode_config->funcs as part of the fbdev registration process. Make sure dev->mode_config.funcs is properly set to avoid dereferencing a NULL pointer. Reported-by: Mike Marshall <hubcap@omnibond.com> Reported-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: c61b93fe51b1 ("drm/atomic: Fix remaining places where !funcs->best_encoder is valid") Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-09drm/edid: Set 8 bpc color depth for displays with "DFP 1.x compliant TMDS".Mario Kleiner
According to E-EDID spec 1.3, table 3.9, a digital video sink with the "DFP 1.x compliant TMDS" bit set is "signal compatible with VESA DFP 1.x TMDS CRGB, 1 pixel / clock, up to 8 bits / color MSB aligned". For such displays, the DFP spec 1.0, section 3.10 "EDID support" says: "If the DFP monitor only supports EDID 1.X (1.1, 1.2, etc.) without extensions, the host will make the following assumptions: 1. 24-bit MSB-aligned RGB TFT 2. DE polarity is active high 3. H and V syncs are active high 4. Established CRT timings will be used 5. Dithering will not be enabled on the host" So if we don't know the bit depth of the display from additional colorimetry info we should assume 8 bpc / 24 bpp by default. This patch adds info->bpc = 8 assignement for that case. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-09drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability ↵Mario Kleiner
is unknown" This reverts commit 013dd9e03872 ("drm/i915/dp: fall back to 18 bpp when sink capability is unknown") This commit introduced a regression into stable kernels, as it reduces output color depth to 6 bpc for any video sink connected to a Displayport connector if that sink doesn't report a specific color depth via EDID, or if our EDID parser doesn't actually recognize the proper bpc from EDID. Affected are active DisplayPort->VGA converters and active DisplayPort->DVI converters. Both should be able to handle 8 bpc, but are degraded to 6 bpc with this patch. The reverted commit was meant to fix Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105331 A followup patch implements a fix for that specific bug, which is caused by a faulty EDID of the affected DP panel by adding a new EDID quirk for that panel. DP 18 bpp fallback handling and other improvements to DP sink bpc detection will be handled for future kernels in a separate series of patches. Please backport to stable. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-09drm/edid: Add 6 bpc quirk for display AEO model 0.Mario Kleiner
Bugzilla https://bugzilla.kernel.org/show_bug.cgi?id=105331 reports that the "AEO model 0" display is driven with 8 bpc without dithering by default, which looks bad because that panel is apparently a 6 bpc DP panel with faulty EDID. A fix for this was made by commit 013dd9e03872 ("drm/i915/dp: fall back to 18 bpp when sink capability is unknown"). That commit triggers new regressions in precision for DP->DVI and DP->VGA displays. A patch is out to revert that commit, but it will revert video output for the AEO model 0 panel to 8 bpc without dithering. The EDID 1.3 of that panel, as decoded from the xrandr output attached to that bugzilla bug report, is somewhat faulty, and beyond other problems also sets the "DFP 1.x compliant TMDS" bit, which according to DFP spec means to drive the panel with 8 bpc and no dithering in absence of other colorimetry information. Try to make the original bug reporter happy despite the faulty EDID by adding a quirk to mark that panel as 6 bpc, so 6 bpc output with dithering creates a nice picture. Tested by injecting the edid from the fdo bug into a DP connector via drm_kms_helper.edid_firmware and verifying the 6 bpc + dithering is selected. This patch should be backported to stable. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: stable@vger.kernel.org Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-08Merge branch 'drm-next-4.8' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next A few fixes for amdgpu and ttm for 4.8 - fix a ttm regression caused by the new pipelining code - fixes for mullins on amdgpu - updated golden settings for amdgpu * 'drm-next-4.8' of git://people.freedesktop.org/~agd5f/linux: drm/ttm: Wait for a BO to become idle before unbinding it from GTT drm/amdgpu: update golden setting of polaris10 drm/amdgpu: update golden setting of stoney drm/amdgpu: update golden setting of polaris11 drm/amdgpu: update golden setting of carrizo drm/amdgpu: update golden setting of iceland drm/amd/amdgpu: change pptable output format from ASCII to binary drm/amdgpu/ci: add mullins to default case for smc ucode drm/amdgpu/gmc7: add missing mullins case
2016-08-08Merge tag 'drm-intel-next-fixes-2016-08-05' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next 3 intel fixes. * tag 'drm-intel-next-fixes-2016-08-05' of git://anongit.freedesktop.org/drm-intel: drm/i915/fbdev: Check for the framebuffer before use drm/i915: Never fully mask the the EI up rps interrupt on SNB/IVB drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL
2016-08-08drm: Paper over locking inversion after registration reworkDaniel Vetter
drm_connector_register_all requires a few too many locks because our connector_list locking is busted. Add another FIXME+hack to work around this. This should address the below lockdep splat: ====================================================== [ INFO: possible circular locking dependency detected ] 4.7.0-rc5+ #524 Tainted: G O ------------------------------------------------------- kworker/u8:0/6 is trying to acquire lock: (&dev->mode_config.mutex){+.+.+.}, at: [<ffffffff815afde0>] drm_modeset_lock_all+0x40/0x120 but task is already holding lock: ((fb_notifier_list).rwsem){++++.+}, at: [<ffffffff810ac195>] __blocking_notifier_call_chain+0x35/0x70 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 ((fb_notifier_list).rwsem){++++.+}: [<ffffffff810df611>] lock_acquire+0xb1/0x200 [<ffffffff819a55b4>] down_write+0x44/0x80 [<ffffffff810abf91>] blocking_notifier_chain_register+0x21/0xb0 [<ffffffff814c7448>] fb_register_client+0x18/0x20 [<ffffffff814c6c86>] backlight_device_register+0x136/0x260 [<ffffffffa0127eb2>] intel_backlight_device_register+0xa2/0x160 [i915] [<ffffffffa00f46be>] intel_connector_register+0xe/0x10 [i915] [<ffffffffa0112bfb>] intel_dp_connector_register+0x1b/0x80 [i915] [<ffffffff8159dfea>] drm_connector_register+0x4a/0x80 [<ffffffff8159fe44>] drm_connector_register_all+0x64/0xf0 [<ffffffff815a2a64>] drm_modeset_register_all+0x174/0x1c0 [<ffffffff81599b72>] drm_dev_register+0xc2/0xd0 [<ffffffffa00621d7>] i915_driver_load+0x1547/0x2200 [i915] [<ffffffffa006d80f>] i915_pci_probe+0x4f/0x70 [i915] [<ffffffff814a2135>] local_pci_probe+0x45/0xa0 [<ffffffff814a349b>] pci_device_probe+0xdb/0x130 [<ffffffff815c07e3>] driver_probe_device+0x223/0x440 [<ffffffff815c0ad5>] __driver_attach+0xd5/0x100 [<ffffffff815be386>] bus_for_each_dev+0x66/0xa0 [<ffffffff815c002e>] driver_attach+0x1e/0x20 [<ffffffff815bf9be>] bus_add_driver+0x1ee/0x280 [<ffffffff815c1810>] driver_register+0x60/0xe0 [<ffffffff814a1a10>] __pci_register_driver+0x60/0x70 [<ffffffffa01a905b>] i915_init+0x5b/0x62 [i915] [<ffffffff8100042d>] do_one_initcall+0x3d/0x150 [<ffffffff811a935b>] do_init_module+0x5f/0x1d9 [<ffffffff81124416>] load_module+0x20e6/0x27e0 [<ffffffff81124d63>] SYSC_finit_module+0xc3/0xf0 [<ffffffff81124dae>] SyS_finit_module+0xe/0x10 [<ffffffff819a83a9>] entry_SYSCALL_64_fastpath+0x1c/0xac -> #0 (&dev->mode_config.mutex){+.+.+.}: [<ffffffff810df0ac>] __lock_acquire+0x10fc/0x1260 [<ffffffff810df611>] lock_acquire+0xb1/0x200 [<ffffffff819a3097>] mutex_lock_nested+0x67/0x3c0 [<ffffffff815afde0>] drm_modeset_lock_all+0x40/0x120 [<ffffffff8158f79b>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2b/0x80 [<ffffffff8158f81d>] drm_fb_helper_set_par+0x2d/0x50 [<ffffffffa0105f7a>] intel_fbdev_set_par+0x1a/0x60 [i915] [<ffffffff814c13c6>] fbcon_init+0x586/0x610 [<ffffffff8154d16a>] visual_init+0xca/0x130 [<ffffffff8154e611>] do_bind_con_driver+0x1c1/0x3a0 [<ffffffff8154eaf6>] do_take_over_console+0x116/0x180 [<ffffffff814bd3a7>] do_fbcon_takeover+0x57/0xb0 [<ffffffff814c1e48>] fbcon_event_notify+0x658/0x750 [<ffffffff810abcae>] notifier_call_chain+0x3e/0xb0 [<ffffffff810ac1ad>] __blocking_notifier_call_chain+0x4d/0x70 [<ffffffff810ac1e6>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff814c748b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff814c86b1>] register_framebuffer+0x251/0x330 [<ffffffff8158fa9f>] drm_fb_helper_initial_config+0x25f/0x3f0 [<ffffffffa0106b48>] intel_fbdev_initial_config+0x18/0x30 [i915] [<ffffffff810adfd8>] async_run_entry_fn+0x48/0x150 [<ffffffff810a3947>] process_one_work+0x1e7/0x750 [<ffffffff810a3efb>] worker_thread+0x4b/0x4f0 [<ffffffff810aad4f>] kthread+0xef/0x110 [<ffffffff819a85ef>] ret_from_fork+0x1f/0x40 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((fb_notifier_list).rwsem); lock(&dev->mode_config.mutex); lock((fb_notifier_list).rwsem); lock(&dev->mode_config.mutex); *** DEADLOCK *** 6 locks held by kworker/u8:0/6: #0: ("events_unbound"){.+.+.+}, at: [<ffffffff810a38c9>] process_one_work+0x169/0x750 #1: ((&entry->work)){+.+.+.}, at: [<ffffffff810a38c9>] process_one_work+0x169/0x750 #2: (registration_lock){+.+.+.}, at: [<ffffffff814c8487>] register_framebuffer+0x27/0x330 #3: (console_lock){+.+.+.}, at: [<ffffffff814c86ce>] register_framebuffer+0x26e/0x330 #4: (&fb_info->lock){+.+.+.}, at: [<ffffffff814c78dd>] lock_fb_info+0x1d/0x40 #5: ((fb_notifier_list).rwsem){++++.+}, at: [<ffffffff810ac195>] __blocking_notifier_call_chain+0x35/0x70 stack backtrace: CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: G O 4.7.0-rc5+ #524 Hardware name: Intel Corp. Broxton P/NOTEBOOK, BIOS APLKRVPA.X64.0138.B33.1606250842 06/25/2016 Workqueue: events_unbound async_run_entry_fn 0000000000000000 ffff8800758577f0 ffffffff814507a5 ffffffff828b9900 ffffffff828b9900 ffff880075857830 ffffffff810dc6fa ffff880075857880 ffff88007584d688 0000000000000005 0000000000000006 ffff88007584d6b0 Call Trace: [<ffffffff814507a5>] dump_stack+0x67/0x92 [<ffffffff810dc6fa>] print_circular_bug+0x1aa/0x200 [<ffffffff810df0ac>] __lock_acquire+0x10fc/0x1260 [<ffffffff810df611>] lock_acquire+0xb1/0x200 [<ffffffff815afde0>] ? drm_modeset_lock_all+0x40/0x120 [<ffffffff815afde0>] ? drm_modeset_lock_all+0x40/0x120 [<ffffffff819a3097>] mutex_lock_nested+0x67/0x3c0 [<ffffffff815afde0>] ? drm_modeset_lock_all+0x40/0x120 [<ffffffff810fa85f>] ? rcu_read_lock_sched_held+0x7f/0x90 [<ffffffff81208218>] ? kmem_cache_alloc_trace+0x248/0x2b0 [<ffffffff815afdc5>] ? drm_modeset_lock_all+0x25/0x120 [<ffffffff815afde0>] drm_modeset_lock_all+0x40/0x120 [<ffffffff8158f79b>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2b/0x80 [<ffffffff8158f81d>] drm_fb_helper_set_par+0x2d/0x50 [<ffffffffa0105f7a>] intel_fbdev_set_par+0x1a/0x60 [i915] [<ffffffff814c13c6>] fbcon_init+0x586/0x610 [<ffffffff8154d16a>] visual_init+0xca/0x130 [<ffffffff8154e611>] do_bind_con_driver+0x1c1/0x3a0 [<ffffffff8154eaf6>] do_take_over_console+0x116/0x180 [<ffffffff814bd3a7>] do_fbcon_takeover+0x57/0xb0 [<ffffffff814c1e48>] fbcon_event_notify+0x658/0x750 [<ffffffff810abcae>] notifier_call_chain+0x3e/0xb0 [<ffffffff810ac1ad>] __blocking_notifier_call_chain+0x4d/0x70 [<ffffffff810ac1e6>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff814c748b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff814c86b1>] register_framebuffer+0x251/0x330 [<ffffffff815b7e8d>] ? vga_switcheroo_client_fb_set+0x5d/0x70 [<ffffffff8158fa9f>] drm_fb_helper_initial_config+0x25f/0x3f0 [<ffffffffa0106b48>] intel_fbdev_initial_config+0x18/0x30 [i915] [<ffffffff810adfd8>] async_run_entry_fn+0x48/0x150 [<ffffffff810a3947>] process_one_work+0x1e7/0x750 [<ffffffff810a38c9>] ? process_one_work+0x169/0x750 [<ffffffff810a3efb>] worker_thread+0x4b/0x4f0 [<ffffffff810a3eb0>] ? process_one_work+0x750/0x750 [<ffffffff810aad4f>] kthread+0xef/0x110 [<ffffffff819a85ef>] ret_from_fork+0x1f/0x40 [<ffffffff810aac60>] ? kthread_stop+0x2e0/0x2e0 v2: Rebase onto the right branch (hand-editing patches ftw) and add more reporters. Reported-by: Imre Deak <imre.deak@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Reported-by: Jiri Kosina <jikos@kernel.org> Cc: Jiri Kosina <jikos@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-08drm: rcar-du: Link HDMI encoder with bridgeLaurent Pinchart
The conversion of the rcar-du driver from the I2C slave encoder to the DRM bridge API left the HDMI encoder's bridge pointer NULL, preventing the bridge from being handled automatically by the DRM core. Fix it. Fixes: 1d926114d8f4 ("drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-07Merge tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm zpos property support from Dave Airlie: "This tree was waiting on some media stuff I hadn't had time to get a stable branchpoint off, so I just waited until it was all in your tree first. It's been around a bit on the list and shouldn't affect anything outside adding the generic API and moving some ARM drivers to using it" * tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux: drm: rcar: use generic code for managing zpos plane property drm/exynos: use generic code for managing zpos plane property drm: sti: use generic zpos for plane drm: add generic zpos property
2016-08-05drm/ttm: Wait for a BO to become idle before unbinding it from GTTMichel Dänzer
Fixes hangs under memory pressure, e.g. running the piglit test tex3d-maxsize concurrently with other tests. Fixes: 17d33bc9d6ef ("drm/ttm: drop waiting for idle in ttm_bo_evict.") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-04Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge even more updates from Andrew Morton: - dma-mapping API cleanup - a few cleanups and misc things - use jump labels in dynamic-debug * emailed patches from Andrew Morton <akpm@linux-foundation.org>: dynamic_debug: add jump label support jump_label: remove bug.h, atomic.h dependencies for HAVE_JUMP_LABEL arm: jump label may reference text in __exit tile: support static_key usage in non-module __exit sections sparc: support static_key usage in non-module __exit sections powerpc: add explicit #include <asm/asm-compat.h> for jump label drivers/media/dvb-frontends/cxd2841er.c: avoid misleading gcc warning MAINTAINERS: update email and list of Samsung HW driver maintainers block: remove BLK_DEV_DAX config option samples/kretprobe: fix the wrong type samples/kretprobe: convert the printk to pr_info/pr_err samples/jprobe: convert the printk to pr_info/pr_err samples/kprobe: convert the printk to pr_info/pr_err dma-mapping: use unsigned long for dma_attrs media: mtk-vcodec: remove unused dma_attrs include/linux/bitmap.h: cleanup tree-wide: replace config_enabled() with IS_ENABLED() drivers/fpga/Kconfig: fix build failure
2016-08-04dma-mapping: use unsigned long for dma_attrsKrzysztof Kozlowski
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04drm/i915/fbdev: Check for the framebuffer before useChris Wilson
If the fbdev probing fails, and in our error path we fail to clear the dev_priv->fbdev, then we can try and use a dangling fbdev pointer, and in particular a NULL fb. This could also happen in pathological cases where we try to operate on the fbdev prior to it being probed. Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1468431285-28264-2-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> (cherry picked from commit 6bc265424df02f8162f4a17a37e4982e1c64460e) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-08-03drm: i915: fix build when DEBUG_FS is disabledLinus Torvalds
This clearly had never gotten tested, probably because you need a fairly minimal configuration in order to disable DEBUG_FS (several other options select it). The dummy inline functions that were used for the no-DEBUG_FS case were missing the argument names in the declarations. Fixes: 1dac891c1c95 ("drm/i915: Register debugfs interface last") Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03Merge branch 'generic-zpos-v8' of ↵Dave Airlie
http://git.linaro.org/people/benjamin.gaignard/kernel into drm-next Merge generic ZPOS property support, this was backed up behind some other changes I didn't have a stable branch point for. Now they are merged to Linus tree this pull is just drm patches. * 'generic-zpos-v8' of http://git.linaro.org/people/benjamin.gaignard/kernel: drm: rcar: use generic code for managing zpos plane property drm/exynos: use generic code for managing zpos plane property drm: sti: use generic zpos for plane drm: add generic zpos property
2016-08-03drm/i915: Check PSR setup time vs. vblank lengthVille Syrjälä
Bspec says: "Restriction : SRD must not be enabled when the PSR Setup time from DPCD 00071h is greater than the time for vertical blank minus one line." Let's check for that and disallow PSR if we exceed the limit. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-03drm/dp: Add drm_dp_psr_setup_time()Ville Syrjälä
Add a small helper to parse the PSR setup time from the DPCD PSR capabilities and return the value in microseconds. v2: Don't waste so many bytes on the psr_setup_time_us[] table Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-02drm/amdgpu: update golden setting of polaris10Huang Rui
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-02drm/amdgpu: update golden setting of stoneyHuang Rui
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-02drm/amdgpu: update golden setting of polaris11Huang Rui
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-02drm/amdgpu: update golden setting of carrizoHuang Rui
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-02drm/amdgpu: update golden setting of icelandHuang Rui
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-01Merge tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Merge drm updates from Dave Airlie: "This is the main drm pull request for 4.8. I'm down with a cold at the moment so hopefully this isn't in too bad a state, I finished pulling stuff last week mostly (nouveau fixes just went in today), so only this message should be influenced by illness. Apologies to anyone who's major feature I missed :-) Core: Lockless GEM BO freeing Non-blocking atomic work Documentation changes (rst/sphinx) Prep for new fencing changes Simple display helpers Master/auth changes Register/unregister rework Loads of trivial patches/fixes. New stuff: ARM Mali display driver (not the 3D chip) sii902x RGB->HDMI bridge Panel: Support for new panels Improved backlight support Bridge: Convert ADV7511 to bridge driver ADV7533 support TC358767 (DSI/DPI to eDP) encoder chip support i915: BXT support enabled by default GVT-g infrastructure GuC command submission and fixes BXT workarounds SKL/BKL workarounds Demidlayering device registration Thundering herd fixes Missing pci ids Atomic updates amdgpu/radeon: ATPX improvements for better dGPU power control on PX systems New power features for CZ/BR/ST Pipelined BO moves and evictions in TTM GPU scheduler improvements GPU reset improvements Overclocking on dGPUs with amdgpu Polaris powermanagement enabled nouveau: GK20A/GM20B volt and clock improvements. Initial support for GP100/GP104 GPUs, GP104 will not yet support acceleration due to NVIDIA having not released firmware for them as of yet. exynos: Exynos5433 SoC with IOMMU support. vc4: Shader validation for branching imx-drm: Atomic mode setting conversion Reworked DMFC FIFO allocation External bridge support analogix-dp: RK3399 eDP support Lots of fixes. rockchip: Lots of small fixes. msm: DT bindings cleanups Shrinker and madvise support ASoC HDMI codec support tegra: Host1x driver cleanups SOR reworking for DP support Runtime PM support omapdrm: PLL enhancements Header refactoring Gamma table support arcgpu: Simulator support virtio-gpu: Atomic modesetting fixes. rcar-du: Misc fixes. mediatek: MT8173 HDMI support sti: ASOC HDMI codec support Minor fixes fsl-dcu: Suspend/resume support Bridge support amdkfd: Minor fixes. etnaviv: Enable GPU clock gating hisilicon: Vblank and other fixes" * tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux: (1575 commits) drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup drm/nouveau/acpi: fix lockup with PCIe runtime PM drm/nouveau/acpi: check for function 0x1B before using it drm/nouveau/acpi: return supported DSM functions drm/nouveau/acpi: ensure matching ACPI handle and supported functions drm/nouveau/fbcon: fix font width not divisible by 8 drm/amd/powerplay: remove enable_clock_power_gatings_tasks from initialize and resume events drm/amd/powerplay: move clockgating to after ungating power in pp for uvd/vce drm/amdgpu: add query device id and revision id into system info entry at CGS drm/amdgpu: add new definition in bif header drm/amd/powerplay: rename smum header guards drm/amdgpu: enable UVD context buffer for older HW drm/amdgpu: fix default UVD context size drm/amdgpu: fix incorrect type of info_id drm/amdgpu: make amdgpu_cgs_call_acpi_method as static drm/amdgpu: comment out unused defaults_staturn_pro static const structure to fix the build drm/amdgpu: enable UVD VM only on polaris drm/amdgpu: increase timeout of IB test drm/amdgpu: add destroy session when generate VCE destroy msg. drm/amd: fix deadlock of job_list_lock V2 ...
2016-08-02Merge branch 'linux-4.8' of git://github.com/skeggsb/linux into drm-nextDave Airlie
Runtime PM fixes, fbcon and nv30 fix. * 'linux-4.8' of git://github.com/skeggsb/linux: drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup drm/nouveau/acpi: fix lockup with PCIe runtime PM drm/nouveau/acpi: check for function 0x1B before using it drm/nouveau/acpi: return supported DSM functions drm/nouveau/acpi: ensure matching ACPI handle and supported functions drm/nouveau/fbcon: fix font width not divisible by 8
2016-08-01drm/amd/amdgpu: change pptable output format from ASCII to binaryEric Huang
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-01drm/amdgpu/ci: add mullins to default case for smc ucodeAlex Deucher
It's already covered by the default case, but add it for consistency. Reviewed-by: Alexandre Demers <alexandre.f.demers@gmail.com> Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-01drm/amdgpu/gmc7: add missing mullins caseAlex Deucher
Looks like this got missed when we ported the code from radeon. Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-07-30drm/nouveau/gr/nv3x: fix instobj write offsets in gr setupIlia Mirkin
This should fix some unaligned access warnings. This is also likely to fix non-descript issues on nv30/nv34 as a result of incorrect channel setup. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96836 Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-30drm/nouveau/acpi: fix lockup with PCIe runtime PMPeter Wu
Since "PCI: Add runtime PM support for PCIe ports", the parent PCIe port can be runtime-suspended which disables power resources via ACPI. This is incompatible with DSM, resulting in a GPU device which is still in D3 and locks up the kernel on resume (on a Clevo P651RA, GTX965M). Mirror the behavior of Windows 8 and newer[1] (as observed via an AMLi debugger trace) and stop using the DSM functions for D3cold when power resources are available on the parent PCIe port. pci_d3cold_disable() is not used because on some machines, the old DSM method is broken. On a Lenovo T440p (GT 730M) memory and disk corruption would occur, but that is fixed with this patch[2]. [1]: https://msdn.microsoft.com/windows/hardware/drivers/bringup/firmware-requirements-for-d3cold [2]: https://github.com/Bumblebee-Project/bbswitch/issues/78#issuecomment-223549072 v2: simply check directly for _PR3. Added affected machines. v3: fixed block comment coding style. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Peter Wu <peter@lekensteyn.nl> Acked-by: Dave Airlie <airlied@redhat.com Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-30drm/nouveau/acpi: check for function 0x1B before using itPeter Wu
Do not unconditionally invoke function 0x1B without checking for its availability, it leads to an infinite loop on some firmware. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=104791 Fixes: 5addcf0a5f0fad ("nouveau: add runtime PM support (v0.9)") Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Peter Wu <peter@lekensteyn.nl> Acked-by: Dave Airlie <airlied@redhat.com Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-30drm/nouveau/acpi: return supported DSM functionsPeter Wu
Return the set of supported functions to the caller. No functional changes. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Peter Wu <peter@lekensteyn.nl> Acked-by: Dave Airlie <airlied@redhat.com Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-30drm/nouveau/acpi: ensure matching ACPI handle and supported functionsPeter Wu
Ensure that the returned set of supported DSM functions (MUX, Optimus) match the ACPI handle that is set in nouveau_dsm_pci_probe. As there are no machines with a MUX function on just one PCI device and an Optimus on another, there should not be a functional impact. This change however makes this implicit assumption more obvious. Convert int to bool and rename has_dsm to has_mux while at it. Let the caller set nouveau_dsm_priv.dhandle as needed. v2: pass dhandle to the caller. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Peter Wu <peter@lekensteyn.nl> Acked-by: Dave Airlie <airlied@redhat.com Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-30drm/nouveau/fbcon: fix font width not divisible by 8Mikulas Patocka
The patch f045f459d925 ("drm/nouveau/fbcon: fix out-of-bounds memory accesses") tries to fix some out of memory accesses. Unfortunatelly, the patch breaks the display when using fonts with width that is not divisiable by 8. The monochrome bitmap for each character is stored in memory by lines from top to bottom. Each line is padded to a full byte. For example, for 22x11 font, each line is padded to 16 bits, so each character is consuming 44 bytes total, that is 11 32-bit words. The patch f045f459d925 changed the logic to "dsize = ALIGN(image->width * image->height, 32) >> 5", that is just 8 words - this is incorrect and it causes display corruption. This patch adds the necesary padding of lines to 8 bytes. This patch should be backported to stable kernels where f045f459d925 was backported. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: f045f459d925 ("drm/nouveau/fbcon: fix out-of-bounds memory accesses") Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-07-30Merge tag 'imx-drm-fixes-2016-07-27' of ↵Dave Airlie
git://git.pengutronix.de/git/pza/linux into drm-next imx-drm ldb mode set fix - fix imx-ldb mode setting, which was broken by commit 49f98bc4d44a4 ("drm/imx: store internal bus configuration in crtc state") * tag 'imx-drm-fixes-2016-07-27' of git://git.pengutronix.de/git/pza/linux: drm/imx: imx-ldb: do not try to dereference crtc->state->state in encoder mode_set
2016-07-30Merge branch 'drm-next-4.8' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next A few more patches for amdgpu and radeon for 4.8. The big change is the additional power feature enablement for polaris that was pending the 4.7 back merge. The rest are mainly bug fixes and cleanups. * 'drm-next-4.8' of git://people.freedesktop.org/~agd5f/linux: (59 commits) drm/amd/powerplay: remove enable_clock_power_gatings_tasks from initialize and resume events drm/amd/powerplay: move clockgating to after ungating power in pp for uvd/vce drm/amdgpu: add query device id and revision id into system info entry at CGS drm/amdgpu: add new definition in bif header drm/amd/powerplay: rename smum header guards drm/amdgpu: enable UVD context buffer for older HW drm/amdgpu: fix default UVD context size drm/amdgpu: fix incorrect type of info_id drm/amdgpu: make amdgpu_cgs_call_acpi_method as static drm/amdgpu: comment out unused defaults_staturn_pro static const structure to fix the build drm/amdgpu: enable UVD VM only on polaris drm/amdgpu: increase timeout of IB test drm/amdgpu: add destroy session when generate VCE destroy msg. drm/amd: fix deadlock of job_list_lock V2 drm/amd: reset hw count when reset job drm/amdgpu: free handles after fini the context drm/ttm: partial revert "cleanup ttm_tt_(unbind|destroy)" v3 drm/amdgpu: add a fence timeout for the IB tests v2 drm/amdgpu: move UVD IB test into common code v2 drm/amdgpu: use begin/end_use for VCE power/clock gating ...
2016-07-30Merge tag 'topic/drm-misc-2016-07-28' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next A few more simple fixes that Sean&I collected. There's a bunch of bigger things on dri-devel, but I think those are all too late for 4.8 really. I'll try and go collect them after -rc1 for 4.9. * tag 'topic/drm-misc-2016-07-28' of git://anongit.freedesktop.org/drm-intel: drm/arm: mali-dp: Fix error return code in malidp_bind() drm/arm: mali-dp: Remove redundant dev_err call in malidp_bind() drm/gma500: remove unnecessary stub for fb_ioctl() apple-gmux: Sphinxify docs drm/arm: mali-dp: Set crtc.port to the port instead of the endpoint drm/sti: use new Reset API drm/etnaviv: Optimize error handling in etnaviv_gem_new_userptr() drm/etnaviv: Delete unnecessary checks before two function calls drm/vmwgfx: Delete an unnecessary check before the function call "vfree" drm/qxl: Delete an unnecessary check before drm_gem_object_unreference_unlocked() drm/mgag200: Delete an unnecessary check before drm_gem_object_unreference_unlocked() drm/bridge: ps8622: Delete an unnecessary check before backlight_device_unregister() GPU-DRM-GMA500: Delete unnecessary checks before two function calls GPU-DRM-OMAP: Delete unnecessary checks before two function calls
2016-07-29drm/i915: Never fully mask the the EI up rps interrupt on SNB/IVBVille Syrjälä
SNB (and IVB too I suppose) starts to misbehave if the GPU gets stuck in an infinite batch buffer loop. The GPU apparently hogs something critical and CPUs start to lose interrupts and whatnot. We can keep the system limping along by unmasking some interrupts in GEN6_PMINTRMSK. The EI up interrupt has been previously chosen for that task, so let's never mask it. v2: s/gen6_rps_pm_mask/gen6_sanitize_rps_pm_mask/ (Chris) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93122 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1464014568-4529-1-git-send-email-ville.syrjala@linux.intel.com Cc: stable@vger.kernel.org (cherry picked from commit 12c100bfa5d9103b6c4d43636fee09c31e75605a) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-07-29drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKLVille Syrjälä
Bspec tells us to keep bashing the PCU for up to 3ms when trying to inform it about an upcoming change in the cdclk frequency. Currently we only keep at it for 15*10usec (+ whatever delays gets added by the sandybridge_pcode_read() itself). Let's change the limit to 3ms. I decided to keep 10 usec delay per iteration for now, even though the spec doesn't really tell us to do that. Cc: stable@vger.kernel.org Fixes: 5d96d8afcfbb ("drm/i915/skl: Deinit/init the display at suspend/resume") Cc: David Weinehall <david.weinehall@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1468416723-23440-1-git-send-email-ville.syrjala@linux.intel.com Tested-by: David Weinehall <david.weinehall@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 848496e5902833600f7992f4faa82dc1546051ba) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-07-29drm/amd/powerplay: remove enable_clock_power_gatings_tasks from initialize ↵Tom St Denis
and resume events Setting PG state this early would cause lock ups in the IP block initialized functions. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-29drm/amd/powerplay: move clockgating to after ungating power in pp for uvd/vceTom St Denis
Cannot set clockgating state before ungating power. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-29drm/amdgpu: add query device id and revision id into system info entry at CGSHuang Rui
This patch adds device id and revision into system info entry at CGS, it's able to get PCI device id and revision id from amdgpu, it might get more info in future. PCI device id will be also used on powerplay part at current. Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-29drm/amdgpu: add new definition in bif headerHuang Rui
This patch adds new definition in bif header, and will be used on iceland HW powertune part. Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-29drm/amd/powerplay: rename smum header guardsHuang Rui
This patch renames the smum header guards to align with the file name. Reported-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-29drm/amdgpu: enable UVD context buffer for older HWChristian König
Supported starting on certain FW versions. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-29drm/amdgpu: fix default UVD context sizeChristian König
Context buffers should be denied by default, not allowed. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-29drm/amdgpu: fix incorrect type of info_idHuang Rui
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-29drm/amdgpu: make amdgpu_cgs_call_acpi_method as staticHuang Rui
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-29drm/amdgpu: comment out unused defaults_staturn_pro static const structure ↵Slava Grigorev
to fix the build Signed-off-by: Slava Grigorev <slava.grigorev@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-29drm/amdgpu: enable UVD VM only on polarisChristian König
Stoney support it, but doesn't has unlimited session support. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-29drm/amdgpu: increase timeout of IB testChunming Zhou
we should give enough time to IB test. Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-11 23:24:00 +0000