summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2010-11-18drm/ttm: Fix up a theoretical deadlockThomas Hellstrom
A process suspended waiting for a higher sequence or no sequence to unreserve, a bo may be beaten to the reservation by a process with a lower sequence. In that case the first process should give up trying to reserve and return -EAGAIN. In order for that to happen, we must wake waiting processes when we change sequence, so that they have a chance to detect the new sequence. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18Merge remote branch 'nouveau/for-airlied' of /ssd/git/drm-nouveau-next into ↵Dave Airlie
drm-fixes * 'nouveau/for-airlied' of /ssd/git/drm-nouveau-next: (25 commits) nouveau: Acknowledge HPD irq in handler, not bottom half drm/nouveau: Fix a few confusions between "chipset" and "card_type". drm/nouveau: don't expose backlight control when available through ACPI drm/nouveau/pm: improve memtiming mappings drm/nouveau: Make PCIE GART size depend on the available RAMIN space. drm/nouveau: Return error from nouveau_gpuobj_new if we're out of RAMIN. drm/nouveau: Fix compilation issues in nouveau_pm when CONFIG_HWMON is not set drm/nouveau: Don't use load detection for connector polling. drm/nv10-nv20: Fix instability after MPLL changes. drm/nv50: implement possible workaround for NV86 PGRAPH TLB flush hang drm/nouveau: Don't poll LVDS outputs. drm/nouveau: Use "force" to decide if analog load detection is ok or not. drm/nv04: Fix scanout over the 16MB mark. drm/nouveau: fix nv40 pcie gart size drm/nva3: fix overflow in fixed point math used for pll calculation drm/nv10: Balance RTs expected to be accessed simultaneously by the 3d engine. drm/nouveau: Expose some BO usage flags to userspace. drm/nouveau: Reduce severity of the unknown getparam error. drm/nouveau: Avoid lock dependency between ramht and ramin spinlocks. drm/nouveau: Some random cleanups. ...
2010-11-18drm/radeon/kms: fix tiling info on evergreenAlex Deucher
We aren't currently using tiling in userspace on evergreen, but the info we currently return for the tiling info query (gb_addr_config) is no adequate for userspace tiling alignment calculations. It does not contain the bank info. Create a custom tiling info dword with all the necessary info (num channels, num banks, group size, row size). Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18drm/radeon/kms: fix alignment when allocating buffersAlex Deucher
We were previously dropping alignment requests on the floor when allocating buffers so we always ended up page aligned. Certain tiling modes on 6xx+ require larger alignment which wasn't happening before. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: Jerome Glisse <j.glisse@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18drm/vmwgfx: Fix up an error path during bo creationThomas Hellstrom
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18drm/radeon/kms: register an i2c adapter name for the dp aux busAlex Deucher
This causes the connector to not be added since i2c init fails for the adapter. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=31688 Noticed by Ari Savolainen. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: Ari Savolainen <ari.m.savolainen@gmail.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18drm/radeon/kms/atom: add proper external encoders supportAlex Deucher
These are external encoder chips connected via DVO or DP. The actual external encoder programming is handled by the kms encoder functions for primary encoder. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18drm/radeon/kms/atom: cleanup and unify DVO handlingAlex Deucher
Handle all the various asic family specific things for DVO. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18drm/radeon/kms: properly power up/down the eDP panel as needed (v4)Alex Deucher
The eDP panel must be powered up for aux transactions, so power it up for detect and mode probe functions, otherwise power it up or down based on dpms. v2: - only mess with eDP panel on DCE4+ - only mess with eDP panel on eDP connectors, not all DP connectors v3: - be extra careful to only mess with eDP panels on eDP connectors v4: - avoid possible null derefernce if a connector has not been assigned to the encoder Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18drm/radeon/kms/atom: set sane defaults in atombios_get_encoder_mode()Alex Deucher
If there was no connector mapped to the encoder, atombios_get_encoder_mode() returned 0 which is the id for DP. Return something sane instead based on the encoder id. This avoids hitting the DP paths on non-DP encoders. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18drm/radeon/kms: turn the backlight off explicitly for dpmsAlex Deucher
Seems some newer systems require this explicitly. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18drm/radeon/kms: fix typo in r600 cs checkerAlex Deucher
Looks like a typo in: drm/radeon/r600: fix tiling issues in CS checker. (f30df2fad0c901e74ac9a52a488a54c69a373a41) Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18drm: radeon: fix error value signVasiliy Kulikov
enable_vblank implementations should use negative result to indicate error. radeon_enable_vblank() returns EINVAL in this case. Change this to -EINVAL. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18drm/radeon/kms: fix and unify tiled buffer alignment checking for r6xx/7xxAlex Deucher
Tiled buffers have the same alignment requirements regardless of whether the surface is for db, cb, or textures. Previously, the calculations where inconsistent for each buffer type. - Unify the alignment calculations in a common function - Standardize the alignment units (pixels for pitch/height/depth, bytes for base) - properly check the buffer base alignments Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18nouveau: Acknowledge HPD irq in handler, not bottom halfAndy Lutomirski
The old code generated an interrupt storm bad enough to completely take down my system. Signed-off-by: Andy Lutomirski <luto@mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nouveau: Fix a few confusions between "chipset" and "card_type".Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nouveau: don't expose backlight control when available through ACPIBen Skeggs
Avoid confusing userspace by not publishing backlight controls if ACPI equivalents are available. Reported-by: Aaron Sowry <aaron@aeneby.se> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nouveau/pm: improve memtiming mappingsRoy Spliet
Improvements: - Fix bug in switch statement - Add parts of 0x10022c, 0x10023c - Clean up 0x100234 - Comment out assumption in 0x100228 until verified Signed-off-by: Roy Spliet <r.spliet@student.tudelft.nl> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nouveau: Make PCIE GART size depend on the available RAMIN space.Francisco Jerez
Reported-by: Tomas Miljenovic <tomasmiljenovic@gmail.com> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nouveau: Return error from nouveau_gpuobj_new if we're out of RAMIN.Francisco Jerez
Reported-by: Tomas Miljenovic <tomasmiljenovic@gmail.com> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nouveau: Fix compilation issues in nouveau_pm when CONFIG_HWMON is not setMartin Peres
Signed-off-by: Martin Peres <martin.peres@ensi-bourges.fr> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nouveau: Don't use load detection for connector polling.Francisco Jerez
Analog output polling makes GL programs jerky when pageflip is being used because it's carried out with the mode_config mutex held. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nv10-nv20: Fix instability after MPLL changes.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nv50: implement possible workaround for NV86 PGRAPH TLB flush hangBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nouveau: Don't poll LVDS outputs.Francisco Jerez
Reported-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nouveau: Use "force" to decide if analog load detection is ok or not.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nv04: Fix scanout over the 16MB mark.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nouveau: fix nv40 pcie gart sizeLucas Stach
Nouveau sets the PCIE GART size to 64MiB for all cards before nv50, but nv40 has enough RAMIN space to support 512MiB GART size. This patch fixes this value to make use of this hardware capability. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nva3: fix overflow in fixed point math used for pll calculationBen Skeggs
And a slight tweak which gets us closer to VBIOS-calculated numbers. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nv10: Balance RTs expected to be accessed simultaneously by the 3d engine.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nouveau: Expose some BO usage flags to userspace.Francisco Jerez
This will be needed for Z compression and to take smarter placement decisions. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Acked-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nouveau: Reduce severity of the unknown getparam error.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Acked-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nouveau: Avoid lock dependency between ramht and ramin spinlocks.Francisco Jerez
The ramht code called some gpuobj functions with the HARDIRQ-safe RAMHT spinlock held, this could potentially lead to a dead lock because ramin_lock is HARDIRQ-unsafe. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nouveau: Some random cleanups.Francisco Jerez
Remove some unused/duplicated definitions and make sparse happy again. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nv11: Fix bad PLL detection false positive.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nv04-nv40: Fall back to panel rescaling if we have no usable native mode.Francisco Jerez
This allows the user to set a mode larger than the native one, useful if we had trouble finding the actual native mode (e.g. because it goes above the hardware bandwidth limits). Reported-by: Grzesiek Sójka <pld@pfu.pl> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nouveau: Reject modes exceeding the integrated TMDS maximum bandwidth.Francisco Jerez
Reported-by: Grzesiek Sójka <pld@pfu.pl> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nouveau: Fix sleep while atomic in the semaphore code.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-18drm/nouveau: ratelimit IRQ messagesJiri Slaby
There are two messages in the ISR of nouveau which might be printed out hundred times in a second. Ratelimit them. (We need to move nouveau_ratelimit to the top of the file.) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reviewed-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-11-10drm/ttm: Be consistent on ttm_bo_init() failuresThomas Hellstrom
Call destroy() on _all_ ttm_bo_init() failures, and make sure that behavior is documented in the function description. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-10drm/radeon/kms: Fix retrying ttm_bo_init() after it failed once.Michel Dänzer
If ttm_bo_init() returns failure, it already destroyed the BO, so we need to retry from scratch. Signed-off-by: Michel Dänzer <daenzer@vmware.com> Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-09drm/radeon/kms: fix thermal sensor reporting on rv6xxAlex Deucher
Temperature is not shifted as on newer asics. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-09drm/radeon/kms: fix bugs in ddc and cd path router codeTyson Whitehead
This is a follow on to: 2b5b1d7da9583484b3a9e7e375a90ca0e8ca07c2 (drm/radeon/kms: add support for clock/data path routers) That patch completed mux support for ddc and cd line routing between connectors. This patch fixes an indexing typo that was resulting in the atom bios router objects not always being walked, ensures the validity entries for the reused router structure are reset for every connector object walked, and corrects the masking operations used to update the mux control bits. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=31339 Signed-off-by: Tyson Whitehead <twhitehead@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-09drm/radeon/kms: add support for clock/data path routersAlex Deucher
This is a follow on to: 26b5bc986423cf3887e09188cb662ed651c5374d (drm/radeon/kms: add support for router objects) That patch added support for systems that use a mux to control the ddc line routing between the connectors. This patch adds support for systems that use a mux to control the encoder clock and data path routing to the connectors. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=31339 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-09drm: vmwgfx: fix information leak to userlandKulikov Vasiliy
Structure drm_vmw_fence_rep is copied to userland with field "pad64" uninitialized. It leads to leaking of contents of kernel stack memory. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-09drivers/gpu: Use vzallocJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-09drm/vmwgfx: Fix oops on failing bo pinThomas Hellstrom
When bo pin failed during modesetting, vmwgfx would try to unref a non-existing buffer object. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-09drm/ttm: Remove the CAP_SYS_ADMIN requirement for bo pinningThomas Hellstrom
This breaks vmwgfx non-root EGL clients and is a remnant from the TTM user-space interface. This test should be done in the driver. Replace the remaining placement test with a BUG_ON, since triggering it is a driver bug. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-09drm/ttm: Make sure a sync object doesn't disappear while we use itThomas Hellstrom
The sync object may disappear as soon as we release the bo::lock, so take a reference on it while we use it. One option would be to call sync_object_flush() before releasing the bo::lock, but that would put an atomic requirement on that function. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-09drm/radeon/kms: don't disable shared encoders on pre-DCE3 display blocksAlex Deucher
The A/B links aren't independantly useable on these blocks so when we disable the encoders, make sure to only disable the encoder when there is no connector using it. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=18564 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 22:45:02 +0000