summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2017-12-01Merge tag 'drm-intel-fixes-2017-11-30' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Disable transparent huge pages for now until we have a W/A - Building fix when CONFIG_BACKLIGHT_CLASS_DEVICE is not selected - GMBUS communication robustness - Fbdev hotplug handling fix gvt-fixes-2017-11-28 - regression fix for sane request alloc (Fred) - locking fix (Changbin) - fix invalid addr mask (Xiong) - compression regression fix (Weinan) - fix default pipe enable for virtual display (Xiaolin) * tag 'drm-intel-fixes-2017-11-30' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Disable THP until we have a GPU read BW W/A drm/i915/gvt: Correct ADDR_4K/2M/1G_MASK definition drm/i915/gvt: enabled pipe A default on creating vgpu drm/i915/gvt: Move request alloc to dispatch_workload path only drm/i915/gvt: remove skl_misc_ctl_write handler drm/i915/gvt: Fix unsafe locking caused by spin_unlock_bh drm/i915: fix intel_backlight_device_register declaration drm/i915/fbdev: Serialise early hotplug events with async fbdev config drm/i915: Prevent zero length "index" write drm/i915: Don't try indexed reads to alternate slave addresses
2017-12-01Merge tag 'omapdrm-4.15-fixes' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-fixes omapdrm fixes for 4.15 * Fix platform detection issue causing OMAP3 DPI output to have missing color bits * Fix platform detection issue causing OMAP4 HDMI audio not to work * tag 'omapdrm-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: omapdrm: hdmi4_cec: signedness bug in hdmi4_cec_init() drm: omapdrm: Fix DPI on platforms using the DSI VDDS omapdrm: hdmi4: Correct the SoC revision matching drm/omap: displays: panel-dpi: add backlight dependency drm/omap: Fix error handling path in 'omap_dmm_probe()'
2017-12-01Merge tag 'drm-misc-fixes-2017-11-30' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for -rc2 - big pile of bridge driver (mostly tc358767), all handled by Archit and Andrez - rockchip dsi fix - atomic helper regression fix for spurious -EBUSY (Maarten) - fix deferred fbdev fallout (Maarten) * tag 'drm-misc-fixes-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc: drm/bridge: tc358767: fix 1-lane behavior drm/bridge: tc358767: fix AUXDATAn registers access drm/bridge: tc358767: fix timing calculations drm/bridge: tc358767: fix DP0_MISC register set drm/bridge: tc358767: filter out too high modes drm/bridge: tc358767: do no fail on hi-res displays drm/bridge: Fix lvds-encoder since the panel_bridge rework. drm/bridge: synopsys/dw-hdmi: Enable cec clock drm/bridge: adv7511/33: Fix adv7511_cec_init() failure handling drm/fb_helper: Disable all crtc's when initial setup fails. drm/atomic: make drm_atomic_helper_wait_for_vblanks more agressive drm/rockchip: dw-mipi-dsi: fix possible un-balanced runtime PM enable
2017-11-30drm/imx: always call wait_for_flip_done in commit_tailLucas Stach
drm_atomic_helper_wait_for_vblanks will go away in the future. The new drm_atomic_helper_setup_commit in 4.15 expects that blocking commits have completed flipping before the commit_tail returns. This must be ensured by calling wait_for_vblanks or wait_for_flip_done, where flip_done might do a less agressive wait, which is fine for imx-drm. Fixes: 080de2e5be2d (drm/atomic: Check for busy planes/connectors before setting the commit) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-11-30omapdrm: hdmi4_cec: signedness bug in hdmi4_cec_init()Dan Carpenter
"ret" needs to be signed for the error handling to work. Fixes: 8d7f934df8d8 ("omapdrm: hdmi4_cec: add OMAP4 HDMI CEC support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-11-30drm: omapdrm: Fix DPI on platforms using the DSI VDDSLaurent Pinchart
Commit d178e034d565 ("drm: omapdrm: Move FEAT_DPI_USES_VDDS_DSI feature to dpi code") replaced usage of platform data version with SoC matching to configure DPI VDDS. The SoC match entries were incorrect, they should have matched on the machine name instead of the SoC family. Fix it. The result was observed on OpenPandora with OMAP3530 where the panel only had the Blue channel and Red&Green were missing. It was not observed on GTA04 with DM3730. Fixes: d178e034d565 ("drm: omapdrm: Move FEAT_DPI_USES_VDDS_DSI feature to dpi code") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: stable@vger.kernel.org # 4.14 Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-11-30omapdrm: hdmi4: Correct the SoC revision matchingPeter Ujfalusi
I believe the intention of the commit 2c9fc9bf45f8 ("drm: omapdrm: Move FEAT_HDMI_* features to hdmi4 driver") was to identify omap4430 ES1.x, omap4430 ES2.x and other OMAP4 revisions, like omap4460. By using family=OMAP4 in the match the code will treat omap4460 ES1.x in a same way as it would treat omap4430 ES1.x This breaks HDMI audio on OMAP4460 devices (PandaES for example). Correct the match rule so we are not going to get false positive match. Fixes: 2c9fc9bf45f8 ("drm: omapdrm: Move FEAT_HDMI_* features to hdmi4 driver") Cc: stable@vger.kernel.org # 4.14 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-11-30drm/omap: displays: panel-dpi: add backlight dependencyArnd Bergmann
The new backlight code causes a link failure when backlight support itself is disabled: drivers/gpu/drm/omapdrm/displays/panel-dpi.o: In function `panel_dpi_probe_of': panel-dpi.c:(.text+0x35c): undefined reference to `of_find_backlight_by_node' This adds a Kconfig dependency like we have for the other OMAP display targets. Fixes: 39135a305a0f ("drm/omap: displays: panel-dpi: Support for handling backlight devices") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-11-30drm/omap: Fix error handling path in 'omap_dmm_probe()'Christophe JAILLET
If we don't find a matching device node, we must free the memory allocated in 'omap_dmm' a few lines above. Fixes: 7cb0d6c17b96 ("drm/omap: fix TILER on OMAP5") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-11-30drm/i915: Disable THP until we have a GPU read BW W/AJoonas Lahtinen
We seem to be missing some W/A for 2M pages and are getting a hit on raw GPU read bandwidths (even 30%) even though the GPU write bandwidths improve (even 10%). For now, disable THP, which is our only practical source of 2M pages until we have a W/A for the issue. v2: - Be explicit that we talk about GPU bandwidths (Eero) - s/deny/never/ because that's why (Chris) Reported-by: Valtteri Rantala <valtteri.rantala@intel.com> Fixes: b901bb89324a ("drm/i915/gemfs: enable THP") Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Valtteri Rantala <valtteri.rantala@intel.com> Cc: Eero Tamminen <eero.t.tamminen@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Tested-by: Valtteri Rantala <valtteri.rantala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171127091233.7001-1-joonas.lahtinen@linux.intel.com (cherry picked from commit 9987da4b5dcfc8b94b702d4bb94b30955eb73c75) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-11-30drm/bridge: tc358767: fix 1-lane behaviorAndrey Gusakov
Use drm_dp_channel_eq_ok helper Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-7-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: tc358767: fix AUXDATAn registers accessAndrey Gusakov
First four bytes should go to DP0_AUXWDATA0. Due to bug if len > 4 first four bytes was writen to DP0_AUXWDATA1 and all data get shifted by 4 bytes. Fix it. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-6-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: tc358767: fix timing calculationsAndrey Gusakov
Fields in HTIM01 and HTIM02 regs should be even. Recomended thresh_dly value is max_tu_symbol. Remove set of VPCTRL0.VSDELAY as it is related to DSI input interface. Currently driver supports only DPI. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-5-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: tc358767: fix DP0_MISC register setAndrey Gusakov
Remove shift from TU_SIZE_RECOMMENDED define as it used to calculate max_tu_symbols. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-4-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: tc358767: filter out too high modesAndrey Gusakov
Pixel clock limitation for DPI is 154 MHz. Do not accept modes with higher pixel clock rate. Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-3-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: tc358767: do no fail on hi-res displaysAndrey Gusakov
Do not fail data rates higher than 2.7 and more than 2 lanes. Try to fall back to 2.7Gbps and 2 lanes. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-2-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: Fix lvds-encoder since the panel_bridge rework.Eric Anholt
The panel_bridge bridge attaches to the panel's OF node, not the lvds-encoder's node. Put in a little no-op bridge of our own so that our consumers can still find a bridge where they expect. This also fixes an unintended unregistration and leak of the panel-bridge on module remove. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 13dfc0540a57 ("drm/bridge: Refactor out the panel wrapper from the lvds-encoder bri dge.") Tested-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171114191647.22207-1-eric@anholt.net
2017-11-30drm/bridge: synopsys/dw-hdmi: Enable cec clockPierre-Hugues Husson
Support the "cec" optional clock. The documentation already mentions "cec" optional clock and it is used by several boards, but currently the driver doesn't enable it, thus preventing cec from working on those boards. And even worse: a /dev/cecX device will appear for those boards, but it won't be functioning without configuring this clock. Changes: v4: - Change commit message to stress the importance of this patch v3: - Drop useless braces v2: - Separate ENOENT errors from others - Propagate other errors (especially -EPROBE_DEFER) Signed-off-by: Pierre-Hugues Husson <phh@phh.me> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171125201844.11353-1-phh@phh.me
2017-11-30drm/bridge: adv7511/33: Fix adv7511_cec_init() failure handlingHans Verkuil
If the device tree for a board did not specify a cec clock, then adv7511_cec_init would return an error, which would cause adv7511_probe() to fail and thus there is no HDMI output. There is no need to have adv7511_probe() fail if the CEC initialization fails, so just change adv7511_cec_init() to a void function. In addition, adv7511_cec_init() should just return silently if the cec clock isn't found and show a message for any other errors. An otherwise correct cleanup patch from Dan Carpenter turned this broken failure handling into a kernel Oops, so bisection points to commit 7af35b0addbc ("drm/kirin: Checking for IS_ERR() instead of NULL") rather than 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support"). Based on earlier patches from Arnd and John. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Archit Taneja <architt@codeaurora.org> Cc: John Stultz <john.stultz@linaro.org> Link: https://bugs.linaro.org/show_bug.cgi?id=3345 Link: https://lkft.validation.linaro.org/scheduler/job/48017#L3551 Fixes: 7af35b0addbc ("drm/kirin: Checking for IS_ERR() instead of NULL") Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support") Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/9097b2a4-b6b9-5fca-e039-0a17694b1143@xs4all.nl
2017-11-29drm/radeon: remove init of CIK VMIDs 8-16 for amdkfdOded Gabbay
VMIDs 8-16 in Kaveri were reserved for use by the amdkfd driver. Because we removed amdkfd support from radeon, those VMIDs are now used by radeon and are initialized by radeon. This patch removes the function that initialized those VMIDs for amdkfd use. This initialization overridden the radeon initialization and caused GPU faults and GUI crashed. Fixes: f4fa88ab28ab ("drm/radeon: deprecate and remove KFD interface") Rported-by: Michel Dänzer <michel.daenzer@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-29drm/ttm: fix populate_and_map() functions once moreChristian König
This reverts "drm/ttm: Fix configuration error around populate_and_map() functions". This fix has gone into the wrong direction. Those helpers should be available even when neither CONFIG_INTEL_IOMMU nor CONFIG_SWIOTLB are set. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-29drm/fb_helper: Disable all crtc's when initial setup fails.Maarten Lankhorst
Some drivers like i915 start with crtc's enabled, but with deferred fbcon setup they were no longer disabled as part of fbdev setup. Headless units could no longer enter pc3 state because the crtc was still enabled. Fix this by calling restore_fbdev_mode when we would have called it otherwise once during initial fbdev setup. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: ca91a2758fce ("drm/fb-helper: Support deferred setup") Cc: <stable@vger.kernel.org> # v4.14+ Reported-by: Thomas Voegtle <tv@lio96.de> Tested-by: Thomas Voegtle <tv@lio96.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171128111603.62757-1-maarten.lankhorst@linux.intel.com
2017-11-29drm/atomic: make drm_atomic_helper_wait_for_vblanks more agressiveLucas Stach
drm_atomic_helper_setup_commit expects that flipping of previous commits has happened when it is called to set up a new commit. This can be violated by commits where userspace doesn't get a flip completion event to synchronize against i.e. legacy modesets and property changes. The expectation is that those are done by blocking commits, which wait for completion. Most drivers call drm_atomic_helper_wait_for_vblanks in the commit_tail to ensure completion, but the wait for next vblank might not actually happen if the commit didn't change any planes. Make the wait more agressive by also waiting if no planes changed. This is the minimal regression fix for the 4.15 kernel series. Long term drivers should switch away from drm_atomic_helper_wait_for_vblanks and use drm_atomic_helper_wait_for_flip_done instead. Fixes: de39bec1a0c4 ("drm/atomic: Remove waits in drm_atomic_helper_commit_cleanup_done, v2.") Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171129110431.6300-1-l.stach@pengutronix.de
2017-11-28drm/amd/display: USB-C / thunderbolt dock specific workaroundHersen Wu
reading dpcd 0x600 cause link loss for a particular USB-C dock with thurderbolt. workaround by avoiding dcpd 0x600 read unless it's necessary. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Switch to drm_atomic_helper_wait_for_flip_doneAndrey Grodzovsky
This new helper function is advised to be used for drviers that use the nonblocking commit tracking support instead of drm_atomic_helper_wait_for_vblanks. Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: fix gamma settingRoman Li
Adding gamma changed check as condition for affected plane. We ignored adding plane as affected if modeset was not required. But for color management change we still need it. Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Do not put drm_atomic_state on resumeLeo (Sunpeng) Li
drm_atomic_helper_resume now puts it for us. See relevant patch here: https://lists.freedesktop.org/archives/dri-devel/2017-October/154268.html Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Fix couple more inconsistent NULL checks in dc_resourceHarry Wentland
Found by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1001 acquire_free_pipe_for_stream() error: we previously assumed 'head_pipe' could be null (see line 998) drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1808 dc_validate_global_state() error: we previously assumed 'new_ctx' could be null (see line 1778) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Fix potential NULL and mem leak in create_linksHarry Wentland
Found by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:148 create_links() error: potential null dereference 'link->link_enc'. (kzalloc returns null) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Fix hubp check in set_cursor_positionHarry Wentland
Found by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:298 dc_stream_set_cursor_position() error: we previously assumed 'hubp' could be null (see line 294) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Fix use before NULL check in validate_timingHarry Wentland
Found by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1124 dce110_timing_generator_validate_timing() warn: variable dereferenced before check 'timing' (see line 1116) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Bunch of smatch error and warning fixes in DCHarry Wentland
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/log_helpers.c:79 dc_conn_log() error: buffer overflow 'signal_type_info_tbl' 10 <= 10 drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:266 bios_parser_get_dst_obj() error: uninitialized symbol 'id'. drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_audio.c:357 dce_aud_az_enable() warn: inconsistent indenting drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_resource.c:958 dcn10_acquire_idle_pipe_for_layer() error: we previously assumed 'head_pipe' could be null (see line 952) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Fix amdgpu_dm bugs found by smatchHarry Wentland
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:2760 create_eml_sink() warn: variable dereferenced before check 'aconnector->base.edid_blob_ptr' (see line 2758) drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:4270 amdgpu_dm_atomic_commit_tail() warn: variable dereferenced before check 'dm_new_crtc_state->stream' (see line 4266) drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:4417 dm_restore_drm_connector_state() warn: variable dereferenced before check 'disconnected_acrtc' (see line 4415) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: try to find matching audio inst for enc inst firstCharlene Liu
[Description] in eDP+ HDMI/DP clone or extended configuration, audio inst changed from inst 1 to inst0. No failure related this though, just playback device endpoint inst changed. Also remove one addition register read. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: fix seq issue: turn on clock before programming afmt.Charlene Liu
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: fix memory leaks on error exit returnColin Ian King
Currently in the case where some of the allocations fail for dce110_tgv, dce110_xfmv, dce110_miv or dce110_oppv then the exit return path ends up leaking allocated objects. Fix this by kfree'ing them before returning. Also re-work the comparison of the null pointers to use the !ptr idiom. Detected by CoverityScan, CID#1460246, 1460325, 1460324, 1460392 ("Resource Leak") Fixes: c4562236b3bc ("drm/amd/dc: Add dc display driver (v2)") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: check plane state before validating fbcShirish S
While validation fbc, array_mode of the pipe is accessed without checking plane_state exists for it. Causing to null pointer dereferencing followed by reboot when a crtc associated with external display(not connected) is page flipped. This patch adds a check for plane_state before using it to validate fbc. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Do DC mode-change check when adding CRTCsLeo (Sunpeng) Li
Within atomic check, dm_update_crtcs_state is called twice. First to remove from the dc_state, and subsequently to add to it. In both calls, a secondary mode-change check is done using dc-level states. We shouldn't be doing this while removing, since a new dc_stream_state has not been created to do the necessary comparison. Because of this, the mode_changed flag within the DRM state can be mistakenly set to false. Doing so only when adding prevents this. We are also guaranteed that a call to add will come after remove, or else the atomic check fails (and a commit will not happen). Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Revert noisy assert messagesJordan Lazare
This partially reverts commit 4fb48bb66211 ("dc: fix split viewport rounding error"). Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: fix split viewport rounding errorDmytro Laktyushkin
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Check aux channel before MST resumeJerry (Fangzhi) Zuo
It is to fix: MST display failed to resume from S3 At the beginning of resume from S3, need to check if mgr->aux is NULL. Fake MST encoder doesn't have real aux channel. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: fix split recout offsetDmytro Laktyushkin
Previous recout calculation fix changed recout size rounding and affected the offset when it should not have Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Don't reject 3D timingsAndrew Jiang
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Handle as MST first and then DP dongle if sink support bothHersen Wu
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: fix split recout calculationDmytro Laktyushkin
Recout split rounding code was wrong Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Fix S3 topology changeRoman Li
Clean fake sink flag on resume if real sink connected. Fixing S3 topology change problem like this: 1) x desktop with 1 or > displays 2) unplug display 3) suspend 4) replug same display 5) resume without this change replugged display doesn't light up Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Add timing validation against dongle capEric Yang
For DP active dongles, the dpcd dongle caps are read but not used to validate mode timing. This addresses this. In particular, this change fixes light up on the HDMI 4k TV connected through DP active dongle. Since the 4k TV defaults to YCbCr420, which the dongle don't support. This change does not address MST cases, a more generalized approach must be taken for that. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Should disable when new stream is nullLeo (Sunpeng) Li
core_link_disable_stream should be called when the new stream is null (i.e. want to disable). Modify the if condition to reflect that. Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amd/display: Add null check for 24BPP (xfm and dpp)Bhawanpreet Lakha
Fixes Nullptr error when trying 24BPP Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-28drm/amdgpu: drop experimental flag for ravenAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 14:50:40 +0000