summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm
AgeCommit message (Collapse)Author
2021-02-23drm/atmel: Use drm_atomic_helper_commitDaniel Vetter
One of these drivers that predates the nonblocking support in helpers, and hand-rolled its own thing. Entirely not anything specific here, we can just delete it all and replace it with the helper version. Could also perhaps use the drm_mode_config_helper_suspend/resume stuff, for another few lines deleted. But I'm not looking at that stuff, I'm just going through all the atomic commit functions and make sure they have properly annotated dma-fence critical sections everywhere. v2: - Also delete the workqueue (Sam) - drop the @commit kerneldoc, I missed that one. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20210121152959.1725404-7-daniel.vetter@ffwll.ch
2021-02-23drm/omapdrm: Annotate dma-fence critical section in commit pathDaniel Vetter
Nothing special, just put the end right after hw_done(). Note that in one path there's a wait for the flip/update to complete. But as far as I understand from comments and code that's only relevant for modesets, and skipped if there wasn't a modeset done on a given crtc. For a bit more clarity pull the hw_done() call out of the if/else, that way it's a bit clearer flow. But happy to shuffle this around as is seen fit. Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210121152959.1725404-9-daniel.vetter@ffwll.ch
2021-02-23drm/tegra: Annotate dma-fence critical section in commit pathDaniel Vetter
Again ends just after drm_atomic_helper_commit_hw_done(), but with the twist that we need to make sure we're only annotate the custom version. And not the other clause which just calls drm_atomic_helper_commit_tail_rpm(), which is already annotated. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-tegra@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20210121152959.1725404-11-daniel.vetter@ffwll.ch
2021-02-23drm/tidss: Annotate dma-fence critical section in commit pathDaniel Vetter
Ends right after hw_done(), totally standard case. Acked-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210121152959.1725404-12-daniel.vetter@ffwll.ch
2021-02-23drm/gem: Move drm_gem_fb_prepare_fb() to GEM atomic helpersThomas Zimmermann
The function drm_gem_fb_prepare_fb() is a helper for atomic modesetting, but currently located next to framebuffer helpers. Move it to GEM atomic helpers, rename it slightly and adopt the drivers. Same for the rsp simple-pipe helper. Compile-tested with x86-64, aarch64 and arm. The patch is fairly large, but there are no functional changes. v3: * remove out-comented line in drm_gem_framebuffer_helper.h (Maxime) v2: * rename to drm_gem_plane_helper_prepare_fb() (Daniel) * add tutorial-style documentation Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210222141756.7864-1-tzimmermann@suse.de
2021-02-22drm/ast: fix memory leak when unload the driverTong Zhang
a connector is leaked upon module unload, it seems that we should do similar to sample driver as suggested in drm_drv.c. Adding drm_atomic_helper_shutdown() in ast_pci_remove to prevent leaking. [ 153.822134] WARNING: CPU: 0 PID: 173 at drivers/gpu/drm/drm_mode_config.c:504 drm_mode_config_cle0 [ 153.822698] Modules linked in: ast(-) drm_vram_helper drm_ttm_helper ttm [last unloaded: ttm] [ 153.823197] CPU: 0 PID: 173 Comm: modprobe Tainted: G W 5.11.0-03615-g55f62bc873474 [ 153.823708] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-4 [ 153.824333] RIP: 0010:drm_mode_config_cleanup+0x418/0x470 [ 153.824637] Code: 0c 00 00 00 00 48 8b 84 24 a8 00 00 00 65 48 33 04 25 28 00 00 00 75 65 48 81 c0 [ 153.825668] RSP: 0018:ffff888103c9fb70 EFLAGS: 00010212 [ 153.825962] RAX: ffff888102b0d100 RBX: ffff888102b0c298 RCX: ffffffff818d8b2b [ 153.826356] RDX: dffffc0000000000 RSI: 000000007fffffff RDI: ffff888102b0c298 [ 153.826748] RBP: ffff888103c9fba0 R08: 0000000000000001 R09: ffffed1020561857 [ 153.827146] R10: ffff888102b0c2b7 R11: ffffed1020561856 R12: ffff888102b0c000 [ 153.827538] R13: ffff888102b0c2d8 R14: ffff888102b0c2d8 R15: 1ffff11020793f70 [ 153.827935] FS: 00007f24bff456a0(0000) GS:ffff88815b400000(0000) knlGS:0000000000000000 [ 153.828380] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 153.828697] CR2: 0000000001c39018 CR3: 0000000103c90000 CR4: 00000000000006f0 [ 153.829096] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 153.829486] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 153.829883] Call Trace: [ 153.830024] ? drmm_mode_config_init+0x930/0x930 [ 153.830281] ? cpumask_next+0x16/0x20 [ 153.830488] ? mnt_get_count+0x66/0x80 [ 153.830699] ? drm_mode_config_cleanup+0x470/0x470 [ 153.830972] drm_managed_release+0xed/0x1c0 [ 153.831208] drm_dev_release+0x3a/0x50 [ 153.831420] release_nodes+0x39e/0x410 [ 153.831631] ? devres_release+0x40/0x40 [ 153.831852] device_release_driver_internal+0x158/0x270 [ 153.832143] driver_detach+0x76/0xe0 [ 153.832344] bus_remove_driver+0x7e/0x100 [ 153.832568] pci_unregister_driver+0x28/0xf0 [ 153.832821] __x64_sys_delete_module+0x268/0x300 [ 153.833086] ? __ia32_sys_delete_module+0x300/0x300 [ 153.833357] ? call_rcu+0x372/0x4f0 [ 153.833553] ? fpregs_assert_state_consistent+0x4d/0x60 [ 153.833840] ? exit_to_user_mode_prepare+0x2f/0x130 [ 153.834118] do_syscall_64+0x33/0x40 [ 153.834317] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 153.834597] RIP: 0033:0x7f24bfec7cf7 [ 153.834797] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 41 [ 153.835812] RSP: 002b:00007fff72e6cb58 EFLAGS: 00000202 ORIG_RAX: 00000000000000b0 [ 153.836234] RAX: ffffffffffffffda RBX: 00007f24bff45690 RCX: 00007f24bfec7cf7 [ 153.836623] RDX: 00000000ffffffff RSI: 0000000000000080 RDI: 0000000001c2fb10 [ 153.837018] RBP: 0000000001c2fac0 R08: 2f2f2f2f2f2f2f2f R09: 0000000001c2fac0 [ 153.837408] R10: fefefefefefefeff R11: 0000000000000202 R12: 0000000001c2fac0 [ 153.837798] R13: 0000000001c2f9d0 R14: 0000000000000000 R15: 0000000000000001 [ 153.838194] ---[ end trace b92031513bbe596c ]--- [ 153.838441] [drm:drm_mode_config_cleanup] *ERROR* connector VGA-1 leaked! Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210222023322.984885-1-ztong0001@gmail.com
2021-02-21drm/drv: Remove initialization of static variablesTian Tao
Address the following checkpatch errors: ERROR: do not initialise statics to false Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1613701811-32037-1-git-send-email-tiantao6@hisilicon.com
2021-02-19drm/qxl: add lock asserts to qxl_bo_vmap_locked + qxl_bo_vunmap_lockedGerd Hoffmann
Try avoid re-introducing locking bugs. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-12-kraxel@redhat.com
2021-02-19drm/qxl: rework cursor planeGerd Hoffmann
Add helper functions to create and move the cursor. Create the cursor_bo in prepare_fb callback, in the atomic_commit callback we only send the update command to the host. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-11-kraxel@redhat.com
2021-02-19drm/qxl: move shadow handling to new qxl_prepare_shadow()Gerd Hoffmann
Pure code motion, no functional change. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-10-kraxel@redhat.com
2021-02-19drm/qxl: fix monitors object vmapGerd Hoffmann
Use the correct vmap variant. We don't hold a reservation here, so we can't use the _locked variant. We can drop the pin because qxl_bo_vmap will do that for us. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-9-kraxel@redhat.com
2021-02-19drm/qxl: fix prime vmapGerd Hoffmann
Use the correct vmap variant. We don't have a reservation here, so we can't use the _locked version. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-8-kraxel@redhat.com
2021-02-19drm/qxl: add qxl_bo_vmap/qxl_bo_vunmapGerd Hoffmann
Add vmap/vunmap variants which reserve (and pin) the bo. They can be used in case the caller doesn't hold a reservation for the bo. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-7-kraxel@redhat.com
2021-02-19drm/qxl: rename qxl_bo_kmap -> qxl_bo_vmap_lockedGerd Hoffmann
Append _locked to Make clear that these functions should be called with reserved bo's only. While being at it also rename kmap -> vmap. No functional change. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-6-kraxel@redhat.com
2021-02-19drm/qxl: fix lockdep issue in qxl_alloc_release_reservedGerd Hoffmann
Call qxl_bo_unpin (which does a reservation) without holding the release_mutex lock. Fixes lockdep (correctly) warning on a possible deadlock. Fixes: 65ffea3c6e73 ("drm/qxl: unpin release objects") Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-5-kraxel@redhat.com
2021-02-19drm/qxl: use ttm bo prioritiesGerd Hoffmann
Allow to set priorities for buffer objects. Use priority 1 for surface and cursor command releases. Use priority 0 for drawing command releases. That way the short-living drawing commands are first in line when it comes to eviction, making it *much* less likely that ttm_bo_mem_force_space() picks something which can't be evicted and throws an error after waiting a while without success. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-4-kraxel@redhat.com
2021-02-19drm/qxl: more fence wait reworkGerd Hoffmann
Move qxl_io_notify_oom() call into wait condition. That way the driver will call it again if one call wasn't enough. Also allows to remove the extra dma_fence_is_signaled() check and the goto. Fixes: 5a838e5d5825 ("drm/qxl: simplify qxl_fence_wait") Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-3-kraxel@redhat.com
2021-02-19drm/qxl: properly handle device init failuresGerd Hoffmann
Specifically do not try release resources which where not allocated in the first place. Cc: Tong Zhang <ztong0001@gmail.com> Tested-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-2-kraxel@redhat.com
2021-02-18drm/tilcdc: fix raster control register settingDario Binacchi
The fdd property of the tilcdc_panel_info structure must set the reqdly bit field (bit 12 to 19) of the raster control register. The previous statement set the least significant bit instead. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi> Tested-by: Jyri Sarha <jyri.sarha@iki.fi> Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi> Link: https://patchwork.freedesktop.org/patch/msgid/20210216202225.12861-1-dariobin@libero.it
2021-02-18drm/tilcdc: replace spin_lock_irqsave by spin_lock in hard IRQTian Tao
The code has been in a irq-disabled context since it is hard IRQ. There is no necessity to do it again. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi> Tested-by: Jyri Sarha <jyri.sarha@iki.fi> Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi> Link: https://patchwork.freedesktop.org/patch/msgid/1612751576-42512-1-git-send-email-tiantao6@hisilicon.com
2021-02-18drm/dp_mst: Tune down the WARN modesetting a port with full_pbn=0Imre Deak
It's possible to modeset a connector/mst port that has a 0 full_pbn value: if the sink on the port deasserts its HPD and a branch device reports this via a CSN with the port's ddps=0 and pdt!=NONE the driver clears full_pbn, but the corresponding connector can be still modesetted. This happened on a DELL U2719D monitor as the branch device and an LG 27UL650-W daisy-chained to it, the LG monitor generating a long HPD pulse (doing this for some reason always when waking up from some power saving state). Tune down the WARN about this scenario to a debug message. v2: Use the correct atomic debug message level. (Lyude) References: https://gitlab.freedesktop.org/drm/intel/-/issues/1917 Cc: Lyude Paul <lyude@redhat.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210216123448.410545-1-imre.deak@intel.com
2021-02-17drm: Switch to %p4cc format modifierSakari Ailus
Switch DRM drivers from drm_get_format_name() to %p4cc. This gets rid of a large number of temporary variables at the same time. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-4-sakari.ailus@linux.intel.com
2021-02-17drm/ast: Move all of the cursor-update functionality to atomic_updateThomas Zimmermann
We used to update the cursor image in prepare_fb. Move all this code to atomic_update (where it belongs). The generic helper for shadow-buffered planes now implement the cursor plane's prepare_fb. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-11-tzimmermann@suse.de
2021-02-17drm/ast: Store each HW cursor offset after pinning the rsp BOThomas Zimmermann
As HW cursor BOs never move, we can store the offset in VRAM in the cursor-plane's HWC state. This removes the last possible source of runtime errors from atomic_update. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-10-tzimmermann@suse.de
2021-02-17drm/ast: Map HW cursor BOs permanentlyThomas Zimmermann
The BOs of the hardware cursor are now mapped permanently while the cursor plane is being used. This reduces the CPU overhead of the cursor plane's atomic_update function. The change also resolves a problem with the vmap call in the commit tail. The vmap implementation could acquire the DMA reservation lock on the BO, which is not allowed that late in the atomic update. Removing the vmap call from atomic_update fixes the issue. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-9-tzimmermann@suse.de
2021-02-17drm/ast: Store cursor BOs in cursor planeThomas Zimmermann
The cursor uses two BOs in video RAM to implement double buffering. Store both in struct ast_cursor_plane. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-8-tzimmermann@suse.de
2021-02-17drm/ast: Add cursor-plane data structureThomas Zimmermann
Cursor state is currently located throughout struct ast_private. Having struct ast_cursor_plane as dedicated data structure for cursors helps to organize the modesetting code. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-7-tzimmermann@suse.de
2021-02-17drm/ast: Inline ast cursor-update functions into modesetting codeThomas Zimmermann
The logic for cursor updates is now located in the cursor plane's modesetting code. A number of helper functions remain to modify the rsp registers and image. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-6-tzimmermann@suse.de
2021-02-17drm/ast: Allocate HW cursor BOs during cursor-plane initializationThomas Zimmermann
The BOs are eventually released by the cursor plane's destroy callback. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-5-tzimmermann@suse.de
2021-02-17drm/ast: Initialize planes in helper functionsThomas Zimmermann
This change will help with inlining cursor functions into modesetting code. The primary plane's field used to be cleared with memset(). This has been dropped as the memory is always allocated with kzalloc(). Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-4-tzimmermann@suse.de
2021-02-17drm/ast: Fix invalid usage of AST_MAX_HWC_WIDTH in cursor atomic_checkThomas Zimmermann
Use AST_MAX_HWC_HEIGHT for setting offset_y in the cursor plane's atomic_check. The code used AST_MAX_HWC_WIDTH instead. This worked because both constants has the same value. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-3-tzimmermann@suse.de
2021-02-17drm/ast: Add constants for VGACRCB register bitsThomas Zimmermann
Set the bits in VGACRCB with constants. Alo move the rsp code into a helper function. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-2-tzimmermann@suse.de
2021-02-15drm/stm: Fix bus_flags handlingMarek Vasut
The drm_display_mode_to_videomode() does not populate DISPLAY_FLAGS_DE_LOW or DISPLAY_FLAGS_PIXDATA_NEGEDGE flags in struct videomode. Therefore, no matter what polarity the next bridge or display might require, these flags are never set, and thus the LTDC GCR_DEPOL and GCR_PCPOL bits are never set and the LTDC behaves as if both DISPLAY_FLAGS_PIXDATA_POSEDGE and DISPLAY_FLAGS_DE_HIGH were always set. The fix for this problem is taken almost verbatim from MXSFB driver. In case there is a bridge attached to the LTDC, the bridge might have extra polarity requirements, so extract bus_flags from the bridge and use them for LTDC configuration. Otherwise, extract bus_flags from the connector, which is the display. Fixes: b759012c5fa7 ("drm/stm: Add STM32 LTDC driver") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Antonio Borneo <antonio.borneo@st.com> Cc: Benjamin Gaignard <benjamin.gaignard@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com To: dri-devel@lists.freedesktop.org Tested-by: Yannick Fertre <yannick.fertre@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210127110756.125570-1-marex@denx.de
2021-02-15drm/panfrost: Stay in the threaded MMU IRQ handler until we've handled all IRQsBoris Brezillon
Doing a hw-irq -> threaded-irq round-trip is counter-productive, stay in the threaded irq handler as long as we can. v2: * Rework the loop to avoid a goto Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210205111757.585248-4-boris.brezillon@collabora.com
2021-02-15drm/panfrost: Don't try to map pages that are already mappedBoris Brezillon
We allocate 2MB chunks at a time, so it might appear that a page fault has already been handled by a previous page fault when we reach panfrost_mmu_map_fault_addr(). Bail out in that case to avoid mapping the same area twice. Cc: <stable@vger.kernel.org> Fixes: 187d2929206e ("drm/panfrost: Add support for GPU heap allocations") Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210205111757.585248-3-boris.brezillon@collabora.com
2021-02-15drm/panfrost: Clear MMU irqs before handling the faultBoris Brezillon
When a fault is handled it will unblock the GPU which will continue executing its shader and might fault almost immediately on a different page. If we clear interrupts after handling the fault we might miss new faults, so clear them before. Cc: <stable@vger.kernel.org> Fixes: 187d2929206e ("drm/panfrost: Add support for GPU heap allocations") Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210205111757.585248-2-boris.brezillon@collabora.com
2021-02-12drm/vram-helper: cleanup drm_gem_vram_bo_driver_move_notifyChristian König
Swapping bo->mem was completely unecessary. Cleanup the function which is just a leftover from a TTM cleanup. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210211131659.276275-1-christian.koenig@amd.com
2021-02-10drm/vmwgfx: Remove pointless codeZack Rusin
There's no need to check for the presence of the hotplug property just to return because this is the end of the function so we're returning either way. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209161700.335611-2-zackr@vmware.com
2021-02-10drm/vmwgfx: Correctly set the name of the preferred modeZack Rusin
Our sysfs "modes" entries were broken because our preffered mode never had its name set correctly. This resulted in the first entry simply being called "preferred" followed by a list of other resolutions. Lets fix it by actually setting the name of mode (which is its resolution). This allows one to quickly validate the modes set by the open-vm-tools. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209161700.335611-1-zackr@vmware.com
2021-02-10drm/vmwgfx: add some 16:9 / 16:10 default resolutionsRoland Scheidegger
The default list was old and in particular lacking all common 16:9 resolutions, as well as some newer 16:10 ones. This makes them selectable in resolution change lists, which can be quite useful (for instance in case auto-fit isn't enabled). Signed-off-by: Roland Scheidegger <sroland@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210205010446.26559-1-sroland@vmware.com
2021-02-10drm: use getter/setter functionsJulia Lawall
Use getter and setter functions, for platform_device structures and a mipi_dsi_device structure. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210209211304.1261740-1-Julia.Lawall@inria.fr
2021-02-10drm/vblank: Document drm_crtc_vblank_restore constraintsDaniel Vetter
I got real badly confused when trying to review a fix from Ville for this. Let's try to document better what's required for this, and check the minimal settings at runtime - we can't check ofc that there's indeed no races in the driver callback. Also noticed that the drm_vblank_restore version is unused, so lets unexport that while at it. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209101523.2954281-1-daniel.vetter@ffwll.ch
2021-02-10drm/sun4i: Add alpha property for sun8i and sun50i VI layerRoman Stratiienko
DE3.0 VI layers supports plane-global alpha channel. DE2.0 FCC block have GLOBAL_ALPHA register that can be used as alpha source for blender. Add alpha property to the DRM plane and connect it to the corresponding registers in the mixer. Do not add alpha property for V3s SOC that have DE2.0 and 2 VI planes. Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210128113940.347013-3-r.stratiienko@gmail.com
2021-02-10drm/sun4i: Add alpha property for sun8i UI layerRoman Stratiienko
DE2.0 and DE3.0 UI layers supports plane-global alpha channel. Add alpha property to the DRM plane and connect it to the corresponding registers in mixer. Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210128113940.347013-2-r.stratiienko@gmail.com
2021-02-10drm/aspeed: Use dt matching for default register valuesJoel Stanley
There are minor differences in the values for the threshold value and the scan line size between families of ASPEED SoC. Additionally the SCU registers for the output control and scratch registers differ between families. This adds device tree matching to parameterise these values, allowing us to add support for the AST2400 now, and in the future the AST2600. Reviewed-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://patchwork.freedesktop.org/patch/msgid/20210209123734.130483-3-joel@jms.id.au
2021-02-10drm/aspeed: Look up syscon by phandleJoel Stanley
This scales better to multiple families of SoC. The lookup by compatible can be removed in a future change. The fallback path is for the ast2500 platform only. Other platforms will be added with the new style, so they won't need fallback paths. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://patchwork.freedesktop.org/patch/msgid/20210209123734.130483-2-joel@jms.id.au
2021-02-10drm/tilcdc: send vblank event when disabling crtcQuanyang Wang
When run xrandr to change resolution on Beaglebone Black board, it will print the error information: root@beaglebone:~# xrandr -display :0 --output HDMI-1 --mode 720x400 [drm:drm_crtc_commit_wait] *ERROR* flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:32:tilcdc crtc] commit wait timed out [drm:drm_crtc_commit_wait] *ERROR* flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:34:HDMI-A-1] commit wait timed out [drm:drm_crtc_commit_wait] *ERROR* flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:31:plane-0] commit wait timed out tilcdc 4830e000.lcdc: already pending page flip! This is because there is operation sequence as below: drm_atomic_connector_commit_dpms(mode is DRM_MODE_DPMS_OFF): ... drm_atomic_helper_setup_commit <- init_completion(commit_A->flip_done) drm_atomic_helper_commit_tail tilcdc_crtc_atomic_disable tilcdc_plane_atomic_update <- drm_crtc_send_vblank_event in tilcdc_crtc_irq is skipped since tilcdc_crtc->enabled is 0 tilcdc_crtc_atomic_flush <- drm_crtc_send_vblank_event is skipped since crtc->state->event is set to be NULL in tilcdc_plane_atomic_update drm_mode_setcrtc: ... drm_atomic_helper_setup_commit <- init_completion(commit_B->flip_done) drm_atomic_helper_wait_for_dependencies drm_crtc_commit_wait <- wait for commit_A->flip_done completing Just as shown above, the steps which could complete commit_A->flip_done are all skipped and commit_A->flip_done will never be completed. This will result a time-out ERROR when drm_crtc_commit_wait check the commit_A->flip_done. So add drm_crtc_send_vblank_event in tilcdc_crtc_atomic_disable to complete commit_A->flip_done. Fixes: cb345decb4d2 ("drm/tilcdc: Use standard drm_atomic_helper_commit") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi> Tested-by: Jyri Sarha <jyri.sarha@iki.fi> Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi> Link: https://patchwork.freedesktop.org/patch/msgid/20210209082415.382602-1-quanyang.wang@windriver.com
2021-02-09drm/ttm: drop sysfs directoryChristian König
Not used any more. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210208133226.36955-3-christian.koenig@amd.com
2021-02-09drm/ttm: move memory accounting into vmwgfx v4Christian König
This is just another feature which is only used by VMWGFX, so move it into the driver instead. I've tried to add the accounting sysfs file to the kobject of the drm minor, but I'm not 100% sure if this works as expected. v2: fix typo in KFD and avoid 64bit divide v3: fix init order in VMWGFX v4: use pdev sysfs reference instead of drm Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Zack Rusin <zackr@vmware.com> (v3) Tested-by: Nirmoy Das <nirmoy.das@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210208133226.36955-2-christian.koenig@amd.com
2021-02-09drm/ttm: rework ttm_tt page limit v4Christian König
TTM implements a rather extensive accounting of allocated memory. There are two reasons for this: 1. It tries to block userspace allocating a huge number of very small BOs without accounting for the kmalloced memory. 2. Make sure we don't over allocate and run into an OOM situation during swapout while trying to handle the memory shortage. This is only partially a good idea. First of all it is perfectly valid for an application to use all of system memory, limiting it to 50% is not really acceptable. What we need to take care of is that the application is held accountable for the memory it allocated. This is what control mechanisms like memcg and the normal Linux page accounting already do. Making sure that we don't run into an OOM situation while trying to cope with a memory shortage is still a good idea, but this is also not very well implemented since it means another opportunity of recursion from the driver back into TTM. So start to rework all of this by implementing a shrinker callback which allows for TT object to be swapped out if necessary. v2: Switch from limit to shrinker callback. v3: fix gfp mask handling, use atomic for swapable_pages, add debugfs v4: drop the extra gfp_mask checks Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210208133226.36955-1-christian.koenig@amd.com
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 20:21:36 +0000