summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm
AgeCommit message (Collapse)Author
2017-12-05drm/sun4i: Wire in DE2 YUV supportJernej Skrabec
Now that we have all required bits, add support for YUV formats. DRM subsystem doesn't know YUV411 semi-planar format, so leave that out for now. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-27-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Expand DE2 scaler lib with YUV supportJernej Skrabec
Basic principle of operation when using YUV framebuffer is that chroma planes have to be upscaled to same size as luma. Because of that, expand DE2 scaler library to support that. BSP driver uses another set of FIR filter coefficients for YUV planes. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-26-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Add DE2 definitions for YUV formatsJernej Skrabec
This commit expands translation of DRM YUV format to HW specific information. It doesn't do any functional changes. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-25-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Add DE2 CSC libraryJernej Skrabec
DE2 have many CSC units - channel input CSC, channel output CSC and mixer output CSC and maybe more. Fortunately, they have all same register layout, only base offsets differs. Add support only for channel output CSC for now. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-24-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Add CCSC property to DE2 configurationJernej Skrabec
Base addresses of channel output CSC (CCSC) depends whether mixer in question is first or second and if it is second, if supports VEP or not. This new property will tell which set of base addresses to take. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-23-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Add support for HW scaling to DE2Jernej Skrabec
Scaling is currently supported only for RGB framebuffers Coefficients and algorithm which coefficients to select are taken from BSP driver. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-22-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Add scaler configuration to DE2 mixersJernej Skrabec
No all SoCs support scaling on all channels. For example, V3s support scaling only on VI channels. Because of that, add additional configuration bitmask which tells which channel support scaler. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-21-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Add support for DE2 VI planesJernej Skrabec
This commit adds basic support for VI planes. They are meant for video overlay and because of that they support YUV formats too. However, using YUV format is not straightforward, so only RGB formats are supported for now. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-20-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Reorganize UI layer code in DE2Jernej Skrabec
Till now, DE2 driver supported only UI planes. Before we add support for VI planes, lets split out UI layer specific code from common parts. This commit does the following: - renames sun8i_layer.c to sun8i_ui_layer.c - moves UI channel specific code to sun8i_ui_layer.c - moves common code from sun8i_layer.c to sun8i_mixer.c - renames function and structure names so it is apparent where they belong to No functional change is made. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-19-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Add support for all HW supported DE2 RGB formatsJernej Skrabec
Currently only a few RGB formats are supported by the DE2 driver. Add support for all formats supported by the HW. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-18-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Add multi plane support to DE2 driverJernej Skrabec
Support for multiple UI planes can now be easily enabled just by adding more planes with different index. For now, add immutable zpos property. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-17-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Move interlace related code in DE2Jernej Skrabec
There is no point having code which sets interlace mode of mixer in channel related function. Interlace mode will only change when CRTC state will change, so let's move it to the block which is executed only when primary plane state is changed. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-16-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Move channel size related code in DE2Jernej Skrabec
Channel size should be set every time plane is changed, not only when primary plane changes. Current code works only because only one (primary) plane is supported at the moment. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-15-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Move line width setting in DE2Jernej Skrabec
Line width is a property of a framebuffer and it belongs to sun8i_mixer_update_layer_buffer(). This will became even more obvious when support for multi-plane formats will be added. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-14-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Use values calculated by atomic checkJernej Skrabec
Now that we have properly clipped coordinates in plane state structure, use them. This also fixes bug where source x and y were adjusted for negative value, but width and height weren't. It wasn't discovered because primary plane usually doesn't have negative coordinates. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-13-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Add constraints checking to DE2 driverJernej Skrabec
Since current DE2 driver doesn't know how to scale yet, add atomic check function which checks that. Nice side effect of that function is that populates clipped coordinates and checks visibility of the plane. That data will be used in the future. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-12-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Start using layer id in DE2 driverJernej Skrabec
Till now, plane selection was hardcoded to first overlay in first UI channel and layer parameter is unused. Rename and add parameters to layer functions so they would represent HW more accurately and start using then. It turns out that overlays don't fit well in current DRM design, because they can't be blended together or scaled independetly when they are set to same channel. Because of that, always use only first overlay in each channel. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-11-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Rework enabling plane in DE2 driverJernej Skrabec
If we want to support multiple planes in the future, code which enables pipe has to be moved to appropriate place and it must depend on channel id instead of being hardcoded. Side effect of that rework is definition of default Z position. For now, put first channel at the bottom, second above it and so on. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-10-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Rename some macros in DE2 driverJernej Skrabec
Now that some knowledge of DE2 is gained, rename or add some macros to make code more readable. Max channel macro is removed, since it is not used and it is not clear if it has right value. Structures in BSP driver shows possibility of 5 channels maximum although there is no SoC with such configuration. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-9-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Set blending mode for all channels (DE2)Jernej Skrabec
BSP driver always sets blend mode for all channels, no matter if they are really used or not. Do the same here. The exact meaning of the value is not exactly known, but BSP driver mentions "SRC OVER" and by digging through code some more info can be found. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-8-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Explain color macro in DE2 driverJernej Skrabec
Color attribute have same format troughout the whole driver. Rename macro, add comment with simple explanation and remove redundant definitions. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-7-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Remove setting default values in DE2 driverJernej Skrabec
Premultiply and color key control registers are already set to zero by initialization code few lines above. Furthermore, it seems that colorkeying doesn't really work. It's not used in BSP driver and experiments with it all failed. Just remove the code. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-6-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Fix debug message in DE2Jernej Skrabec
Debug message would print "Enabling" even when disabling plane. Fix it. Fixes: 9d75b8c0b999 (drm/sun4i: add support for Allwinner DE2 mixers) Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-5-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Remove setting alpha mode in DE2 driverJernej Skrabec
Current code sets alpha mode to global alpha mode and global alpha value to 0xff which is totaly opaque. That is not needed for two reasons: - only one plane is active and thus it can be blended only with background, which is black, - it will hinder proper blending when more than one plane is supported Default mode (0) considers pixel alpha value or 0xff if pixel has no alpha information. Global alpha value is ignored in this case. Because of that, just remove the code. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-4-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Rename DE2 RGB format macrosJernej Skrabec
Current RGB formats macros are actually not specific to UI planes. Rename it to something more universal and introduce shift macro. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-3-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Fix format mask in DE2 driverJernej Skrabec
Format mask is one bit too short. Fix it. Fixes: 9d75b8c0b999 (drm/sun4i: add support for Allwinner DE2 mixers) Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-2-jernej.skrabec@siol.net
2017-12-05drm: Document that drm_panel_orientation_quirks.c is shared with fbdevHans de Goede
Add a comment to the DRM_PANEL_ORIENTATION_QUIRKS documenting that the reason for a separate Kconfig for this is because drm_panel_orientation_quirks.c code is shared with fbdev. Suggested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171204223321.15799-1-hdegoede@redhat.com
2017-12-04drm/i915: Add "panel orientation" property to the panel connector, v6.Hans de Goede
Ideally we could use the VBT for this, that would be simple, in intel_dsi_init() check dev_priv->vbt.dsi.config->rotation, set connector->display_info.panel_orientation accordingly and call drm_connector_init_panel_orientation_property(), done. Unfortunately vbt.dsi.config->rotation is always 0 even on tablets with an upside down LCD and where the GOP is properly rotating the EFI fb in hardware. So instead we end up reading the rotation from the primary plane. This commit only implements the panel orientation property for DSI panels on BYT / CHT hardware, as all known non normal oriented panels sofar are only found on this hardware. Changes in v2: -Read back the rotation applied by the GOP from the primary plane instead of relying on dev_priv->vbt.dsi.config->rotation, because it seems that the VBT rotation filed is always 0 even on devices where the GOP does apply a rotation Changes in v3: -Rewrite the code to read back the orientation from the primary plane to contain all of this in intel_dsi.c instead of poking a bunch of holes between all the different layers Changes in v6: -Move hardware readout to intel_dsi_init() Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-6-hdegoede@redhat.com
2017-12-04drm/fb-helper: Apply panel orientation connector prop to the primary plane, v6.Hans de Goede
Apply the "panel orientation" drm connector prop to the primary plane so that fbcon and fbdev using userspace programs display the right way up. Changes in v3: -Use a rotation member in struct drm_fb_helper_crtc and set that from drm_setup_crtcs instead of looping over all crtc's to find the right one later -Since we now no longer look at rotation quirks directly in the fbcon code, set fb_info.fbcon_rotate_hint when the panel is not mounted upright and we cannot use hardware rotation Changes in v4: -Make drm_fb_helper_init() init drm_fb_helper_crtc.rotation to DRM_MODE_ROTATE_0 for all crtcs, so that we do not end up setting the plane_state's rotation to an invalid value for disabled crtcs (caught by Fi.CI) Changes in v5: -Only use hardware (crtc primary plane) rotation for DRM_ROTATE_180, 90 / 270 degree rotation requires special handling which we lack atm -Add a TODO comment for 90 / 270 degree hardware rotation -Add some comments to better document the default case when mapping sw_rotations to fbcon_rotate_hints Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=94894 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-5-hdegoede@redhat.com
2017-12-04drm: Add support for a panel-orientation connector property, v6Hans de Goede
On some devices the LCD panel is mounted in the casing in such a way that the up/top side of the panel does not match with the top side of the device (e.g. it is mounted upside-down). This commit adds the necessary infra for lcd-panel drm_connector-s to have a "panel orientation" property to communicate how the panel is orientated vs the casing. Userspace can use this property to check for non-normal orientation and then adjust the displayed image accordingly by rotating it to compensate. Changes in v2: -Store panel_orientation in drm_display_info, so that drm_fb_helper.c can access it easily -Have a single drm_connector_init_panel_orientation_property rather then create and attach functions. The caller is expected to set drm_display_info.panel_orientation before calling this, then this will check for platform specific quirks overriding the panel_orientation and if the panel_orientation is set after this then it will attach the property. Changes in v6: -Use an enum (with kerneldoc) rather then #defines for DRM_MODE_PANEL_ORIENTATION_* Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-4-hdegoede@redhat.com
2017-12-04drm: Add panel orientation quirks, v6.Hans de Goede
Some x86 clamshell design devices use portrait tablet screens and a display engine which cannot rotate in hardware, so the firmware just leaves things as is and we cannot figure out that the display is oriented non upright from the hardware. So at least on x86, we need a quirk table for this. This commit adds a DMI based quirk table which is initially populated with 5 such devices: Asus T100HA, GPD Pocket, GPD win, I.T.Works TW891 and the VIOS LTH17. This quirk table will be used by the drm code to let userspace know that the display is not mounted upright inside the devices case through a new panel orientation drm-connector property, as well as to tell fbcon to rotate the console so that it shows the right way up. Changes in v5: -Add a kernel-doc comment documenting drm_get_panel_orientation_quirk() -Remove board_* matches from the dmi-matches for the VIOS LTH17 laptop, keeping only the (identical) sys_vendor and product_name matches. This is necessary because an older version of the bios has board_vendor set to VOIS instead of VIOS Changes in v6: -Add reference to added kernel-docs in Documentation/gpu/drm-kms-helpers.rst Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-3-hdegoede@redhat.com
2017-12-04Merge arlied/drm-next into drm-misc-nextGustavo Padovan
We need to pull 66660d4cf21b (drm: add connector info/property for non-desktop displays [v2]) into drm-misc-next to continue the development of the display rotation series. Effectively this also pulls 4.15-r2 into drm-misc-next. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
2017-12-04drm/prime: skip CPU sync in map/unmap dma_bufLucas Stach
Dma-bufs should already be device coherent, as they are only pulled in the CPU domain via the begin/end cpu_access calls. As we cache the mapping set up by dma_map_sg a CPU sync at this point will not actually guarantee proper coherency on non-coherent architectures, so we can as well stop pretending. This is an important performance fix for architectures which need explicit cache synchronization and userspace doing lots of dma-buf imports. Improves Weston on Etnaviv performance 5x, where before this patch > 90% of Weston CPU time was spent synchronizing caches for buffers which are already device coherent. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171130173428.8666-1-l.stach@pengutronix.de
2017-12-04Merge tag 'drm-intel-next-2017-11-17-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next More change sets for 4.16: - Many improvements for selftests and other igt tests (Chris) - Forcewake with PUNIT->PMIC bus fixes and robustness (Hans) - Define an engine class for uABI (Tvrtko) - Context switch fixes and improvements (Chris) - GT powersavings and power gating simplification and fixes (Chris) - Other general driver clean-ups (Chris, Lucas, Ville) - Removing old, useless and/or bad workarounds (Chris, Oscar, Radhakrishna) - IPS, pipe config, etc in preparation for another Fast Boot attempt (Maarten) - OA perf fixes and support to Coffee Lake and Cannonlake (Lionel) - Fixes around GPU fault registers (Michel) - GEM Proxy (Tina) - Refactor of Geminilake and Cannonlake plane color handling (James) - Generalize transcoder loop (Mika Kahola) - New HW Workaround for Cannonlake and Geminilake (Rodrigo) - Resume GuC before using GEM (Chris) - Stolen Memory handling improvements (Ville) - Initialize entry in PPAT for older compilers (Chris) - Other fixes and robustness improvements on execbuf (Chris) - Improve logs of GEM_BUG_ON (Mika Kuoppala) - Rework with massive rename of GuC functions and files (Sagar) - Don't sanitize frame start delay if pipe is off (Ville) - Cannonlake clock fixes (Rodrigo) - Cannonlake HDMI 2.0 support (Rodrigo) - Add a GuC doorbells selftest (Michel) - Add might_sleep() check to our wait_for() (Chris) Many GVT changes for 4.16: - CSB HWSP update support (Weinan) - GVT debug helpers, dyndbg and debugfs (Chuanxiao, Shuo) - full virtualized opregion (Xiaolin) - VM health check for sane fallback (Fred) - workload submission code refactor for future enabling (Zhi) - Updated repo URL in MAINTAINERS (Zhenyu) - other many misc fixes * tag 'drm-intel-next-2017-11-17-1' of git://anongit.freedesktop.org/drm/drm-intel: (260 commits) drm/i915: Update DRIVER_DATE to 20171117 drm/i915: Add a policy note for removing workarounds drm/i915/selftests: Report ENOMEM clearly for an allocation failure Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk" drm/i915: Calculate g4x intermediate watermarks correctly drm/i915: Calculate vlv/chv intermediate watermarks correctly, v3. drm/i915: Pass crtc_state to ips toggle functions, v2 drm/i915: Pass idle crtc_state to intel_dp_sink_crc drm/i915: Enable FIFO underrun reporting after initial fastset, v4. drm/i915: Mark the userptr invalidate workqueue as WQ_MEM_RECLAIM drm/i915: Add might_sleep() check to wait_for() drm/i915/selftests: Add a GuC doorbells selftest drm/i915/cnl: Extend HDMI 2.0 support to CNL. drm/i915/cnl: Simplify dco_fraction calculation. drm/i915/cnl: Don't blindly replace qdiv. drm/i915/cnl: Fix wrpll math for higher freqs. drm/i915/cnl: Fix, simplify and unify wrpll variable sizes. drm/i915/cnl: Remove useless conversion. drm/i915/cnl: Remove spurious central_freq. drm/i915/selftests: exercise_ggtt may have nothing to do ...
2017-12-04Merge tag 'drm-misc-next-2017-11-30' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next Cross-subsystem Changes: - device tree doc for the Mitsubishi AA070MC01 and Tianma TM070RVHG71 panels (Lukasz Majewski) and for a 2nd endpoint on stm32 (Philippe Cornu) Core Changes: The most important changes are: - Add drm_driver .last_close and .output_poll_changed helpers to reduce fbdev emulation footprint in drivers (Noralf) - Fix plane clipping in core and for vmwgfx (Ville) Then we have a bunch of of improvement for print and debug such as the addition of a framebuffer debugfs file. ELD connector, HDMI and improvements. And a bunch of misc improvements, clean ups and style changes and doc updates [airlied: drop eld bits from amdgpu_dm] Driver Changes: - sii8620: filter unsupported modes and add DVI mode support (Maciej Purski) - rockchip: analogix_dp: Remove unnecessary init code (Jeffy Chen) - virtio, cirrus: add fb create_handle support to enable screenshots(Lepton Wu) - virtio: replace reference/unreference with get/put (Aastha Gupta) - vc4, gma500: Convert timers to use timer_setup() (Kees Cook) - vc4: Reject HDMI modes with too high of clocks (Eric) - vc4: Add support for more pixel formats (Dave Stevenson) - stm: dsi: Rename driver name to "stm32-display-dsi" (Philippe Cornu) - stm: ltdc: add a 2nd endpoint (Philippe Cornu) - via: use monotonic time for VIA_WAIT_IRQ (Arnd Bergmann) * tag 'drm-misc-next-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc: (96 commits) drm/bridge: tc358767: add copyright lines MAINTAINERS: change maintainer for Rockchip drm drivers drm/vblank: Fix vblank timestamp debugs drm/via: use monotonic time for VIA_WAIT_IRQ dma-buf: Fix ifnullfree.cocci warnings drm/printer: Add drm_vprintf() drm/edid: Allow HDMI infoframe without VIC or S3D video/hdmi: Allow "empty" HDMI infoframes dma-buf/fence: Fix lock inversion within dma-fence-array drm/sti: Handle return value of platform_get_irq_byname drm/vc4: Add support for NV21 and NV61. drm/vc4: Use .pixel_order instead of custom .flip_cbcr drm/vc4: Add support for DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888 drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state() drm/vmwgfx: Try to fix plane clipping drm/vmwgfx: Use drm_plane_helper_check_state() drm/vmwgfx: Remove bogus crtc coords vs fb size check gpu: gma500: remove unneeded DRIVER_LICENSE #define drm: don't link DP aux i2c adapter to the hardware device node ...
2017-12-01drm/tinydrm: add driver for ILI9225 panelsDavid Lechner
This adds a new driver for display panels based on the Ilitek ILI9225 controller. This was developed for a no-name panel with a red PCB that is commonly marketed for Arduino. See <https://github.com/Nkawu/TFT_22_ILI9225>. Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/1511122328-31133-5-git-send-email-david@lechnology.com
2017-12-01drm/tinydrm: export mipi_dbi_buf_copy and mipi_dbi_spi_cmd_max_speedDavid Lechner
This exports the mipi_dbi_buf_copy() and mipi_dbi_spi_cmd_max_speed() functions so that they can be shared with other drivers. Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/1511122328-31133-4-git-send-email-david@lechnology.com
2017-12-01Merge branch 'drm-fixes-4.15' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Fixes for 4.15. Highlights: - DC fixes for S3, gamma, audio, pageflipping, etc. - fix a regression in radeon from kfd removal - fix a ttm regression with swiotlb disabled - misc other fixes * 'drm-fixes-4.15' of git://people.freedesktop.org/~agd5f/linux: (36 commits) drm/radeon: remove init of CIK VMIDs 8-16 for amdkfd drm/ttm: fix populate_and_map() functions once more drm/amd/display: USB-C / thunderbolt dock specific workaround drm/amd/display: Switch to drm_atomic_helper_wait_for_flip_done drm/amd/display: fix gamma setting drm/amd/display: Do not put drm_atomic_state on resume drm/amd/display: Fix couple more inconsistent NULL checks in dc_resource drm/amd/display: Fix potential NULL and mem leak in create_links drm/amd/display: Fix hubp check in set_cursor_position drm/amd/display: Fix use before NULL check in validate_timing drm/amd/display: Bunch of smatch error and warning fixes in DC drm/amd/display: Fix amdgpu_dm bugs found by smatch drm/amd/display: try to find matching audio inst for enc inst first drm/amd/display: fix seq issue: turn on clock before programming afmt. drm/amd/display: fix memory leaks on error exit return drm/amd/display: check plane state before validating fbc drm/amd/display: Do DC mode-change check when adding CRTCs drm/amd/display: Revert noisy assert messages drm/amd/display: fix split viewport rounding error drm/amd/display: Check aux channel before MST resume ...
2017-12-01Merge branch 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld into ↵Dave Airlie
drm-fixes mali-dp interface cleanups. * 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld: drm: mali-dp: Disable planes when their CRTC gets disabled. drm: mali-dp: Separate static internal data into a read-only structure. drm/arm: Replace instances of drm_dev_unref with drm_dev_put. drm: mali-dp: switch to drm_*_get(), drm_*_put() helpers
2017-12-01Merge tag 'drm-amdkfd-fixes-2017-11-26' of ↵Dave Airlie
git://people.freedesktop.org/~gabbayo/linux into drm-fixes This is amdkfd pull request for -rc2. It contains three small fixes to the CIK SDMA code, compilation error fix in kfd_ioctl.h and fix to accessing a pointer after it was released. * tag 'drm-amdkfd-fixes-2017-11-26' of git://people.freedesktop.org/~gabbayo/linux: uapi: fix linux/kfd_ioctl.h userspace compilation errors drm/amdkfd: fix amdkfd use-after-free GP fault drm/amdkfd: Fix SDMA oversubsription handling drm/amdkfd: Fix SDMA ring buffer size calculation drm/amdgpu: Fix SDMA load/unload sequence on HWS disabled mode
2017-12-01Merge branch 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld into drm-fixesDave Airlie
3 hdlcd fixes/cleanups * 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld: drm/arm: Replace instances of drm_dev_unref with drm_dev_put. drm: Fix checkpatch issue: "WARNING: braces {} are not necessary for single statement blocks." drm: hdlcd: Update PM code to save/restore console.
2017-12-01Merge tag 'imx-drm-fixes-2017-11-30' of ↵Dave Airlie
git://git.pengutronix.de/git/pza/linux into drm-fixes drm/imx: fix commit_tail for new drm_atomic_helper_setup_commit Since commit 080de2e5be2d ("drm/atomic: Check for busy planes/connectors before setting the commit"), drm_atomic_helper_setup_commit expects that blocking commits have completed flipping before the commit_tail returns. Add the missing wait_for_flip_done to commit_tail to ensure this. * tag 'imx-drm-fixes-2017-11-30' of git://git.pengutronix.de/git/pza/linux: drm/imx: always call wait_for_flip_done in commit_tail
2017-12-01Merge tag 'drm-intel-fixes-2017-11-30' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Disable transparent huge pages for now until we have a W/A - Building fix when CONFIG_BACKLIGHT_CLASS_DEVICE is not selected - GMBUS communication robustness - Fbdev hotplug handling fix gvt-fixes-2017-11-28 - regression fix for sane request alloc (Fred) - locking fix (Changbin) - fix invalid addr mask (Xiong) - compression regression fix (Weinan) - fix default pipe enable for virtual display (Xiaolin) * tag 'drm-intel-fixes-2017-11-30' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Disable THP until we have a GPU read BW W/A drm/i915/gvt: Correct ADDR_4K/2M/1G_MASK definition drm/i915/gvt: enabled pipe A default on creating vgpu drm/i915/gvt: Move request alloc to dispatch_workload path only drm/i915/gvt: remove skl_misc_ctl_write handler drm/i915/gvt: Fix unsafe locking caused by spin_unlock_bh drm/i915: fix intel_backlight_device_register declaration drm/i915/fbdev: Serialise early hotplug events with async fbdev config drm/i915: Prevent zero length "index" write drm/i915: Don't try indexed reads to alternate slave addresses
2017-12-01Merge tag 'omapdrm-4.15-fixes' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-fixes omapdrm fixes for 4.15 * Fix platform detection issue causing OMAP3 DPI output to have missing color bits * Fix platform detection issue causing OMAP4 HDMI audio not to work * tag 'omapdrm-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: omapdrm: hdmi4_cec: signedness bug in hdmi4_cec_init() drm: omapdrm: Fix DPI on platforms using the DSI VDDS omapdrm: hdmi4: Correct the SoC revision matching drm/omap: displays: panel-dpi: add backlight dependency drm/omap: Fix error handling path in 'omap_dmm_probe()'
2017-12-01Merge tag 'drm-misc-fixes-2017-11-30' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for -rc2 - big pile of bridge driver (mostly tc358767), all handled by Archit and Andrez - rockchip dsi fix - atomic helper regression fix for spurious -EBUSY (Maarten) - fix deferred fbdev fallout (Maarten) * tag 'drm-misc-fixes-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc: drm/bridge: tc358767: fix 1-lane behavior drm/bridge: tc358767: fix AUXDATAn registers access drm/bridge: tc358767: fix timing calculations drm/bridge: tc358767: fix DP0_MISC register set drm/bridge: tc358767: filter out too high modes drm/bridge: tc358767: do no fail on hi-res displays drm/bridge: Fix lvds-encoder since the panel_bridge rework. drm/bridge: synopsys/dw-hdmi: Enable cec clock drm/bridge: adv7511/33: Fix adv7511_cec_init() failure handling drm/fb_helper: Disable all crtc's when initial setup fails. drm/atomic: make drm_atomic_helper_wait_for_vblanks more agressive drm/rockchip: dw-mipi-dsi: fix possible un-balanced runtime PM enable
2017-11-30drm/tinydrm: Use drm_mode_config_helper_suspend/resume()Noralf Trønnes
Replace driver's code with the generic helpers that do the same thing. Remove todo entry. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Stefan Agner <stefan@agner.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171106191812.38927-6-noralf@tronnes.org
2017-11-30drm/arm/mali: Use drm_mode_config_helper_suspend/resume()Noralf Trønnes
Replace driver's code with the generic helpers that do the same thing. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171106191812.38927-4-noralf@tronnes.org
2017-11-30drm/modeset-helper: Add simple modeset suspend/resume helpersNoralf Trønnes
Add drm_mode_config_helper_suspend/resume() which takes care of atomic modeset suspend/resume for simple use cases. The suspend state is stored in struct drm_mode_config. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171106191812.38927-3-noralf@tronnes.org
2017-11-30drm/probe-helper: Fix drm_kms_helper_poll_enable() docsNoralf Trønnes
Fix docs to reflect code and drm_kms_helper_poll_disable() docs by saying that calling drm_kms_helper_poll_enable() is fine even if output polling is not enabled. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171106191812.38927-2-noralf@tronnes.org
2017-11-30drm/sun4i: use sun4i_tcon_of_table to check if a device node is a TCONChen-Yu Tsai
The sun4i DRM driver maintains a list of compatible strings it uses to check if a device node within the display component graph is a TCON. The TCON driver also has this list, used to bind the TCON driver to the device. These two lists are identical. Instead of maintaining two identical lists, export the list from the TCON driver for the DRM driver to use. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171127084632.25511-1-wens@csie.org
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 21:11:00 +0000