summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm
AgeCommit message (Collapse)Author
2015-10-12drm/nouveau/bios: fix OF loadingIlia Mirkin
Currently OF bios load fails for a few reasons: - checksum failure - bios size too small - no PCIR header - bios length not a multiple of 4 In this change, we resolve all of the above by ignoring any checksum failures (since OF VBIOS tends not to have a checksum), and faking the PCIR data when loading from OF. Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2015-10-12drm/nouveau/fbcon: take runpm reference when userspace has an open fdBen Skeggs
We need to do this in order to prevent accesses to the device while it's powered down. Userspace may have an mmap of the fb, and there's no good way (that I know of) to prevent it from touching the device otherwise. This fixes some nasty races between runpm and plymouth on some systems, which result in the GPU getting very upset and hanging the boot. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2015-10-12drm/nouveau/nouveau: Disable AGP for SiS 761Ondrej Zary
SiS 761 chipset does not support AGP cards but has AGP capability (for the onboard video). At least PC Chips A31G board using this chipset has an AGP-like AGPro slot that's wired to the PCI bus. Enabling AGP will fail (GPU lockup and software fbcon, X11 hangs). Add support for matching just the host bridge in nvkm_device_agp_quirks and add entry for SiS 761 with mode 0 (AGP disabled). Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2015-10-12drm/nouveau/display: allow up to 16k width/height for fermi+Ilia Mirkin
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2015-10-12drm/nouveau/bios: translate devinit pri/sec i2c bus to internal identifiersBen Skeggs
fdo#92013. Regression from "i2c: transition pad/ports away from being based on nvkm_object" Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2015-10-02drm/dp/mst: add some defines for logical/physical portsDave Airlie
This just removes the magic number. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-02drm/dp/mst: drop cancel work sync in the mstb destroy path (v2)Dave Airlie
Since 9eb1e57f564d4e6e10991402726cc83fe0b9172f drm/dp/mst: make sure mst_primary mstb is valid in work function we validate the mstb structs in the work function, and doing that takes a reference. So we should never get here with the work function running using the mstb device, only if the work function hasn't run yet or is running for another mstb. So we don't need to sync the work here, this was causing lockdep spew as below. [ +0.000160] ============================================= [ +0.000001] [ INFO: possible recursive locking detected ] [ +0.000002] 3.10.0-320.el7.rhel72.stable.backport.3.x86_64.debug #1 Tainted: G W ------------ [ +0.000001] --------------------------------------------- [ +0.000001] kworker/4:2/1262 is trying to acquire lock: [ +0.000001] ((&mgr->work)){+.+.+.}, at: [<ffffffff810b29a5>] flush_work+0x5/0x2e0 [ +0.000007] but task is already holding lock: [ +0.000001] ((&mgr->work)){+.+.+.}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710 [ +0.000004] other info that might help us debug this: [ +0.000001] Possible unsafe locking scenario: [ +0.000002] CPU0 [ +0.000000] ---- [ +0.000001] lock((&mgr->work)); [ +0.000002] lock((&mgr->work)); [ +0.000001] *** DEADLOCK *** [ +0.000001] May be due to missing lock nesting notation [ +0.000002] 2 locks held by kworker/4:2/1262: [ +0.000001] #0: (events_long){.+.+.+}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710 [ +0.000004] #1: ((&mgr->work)){+.+.+.}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710 [ +0.000003] stack backtrace: [ +0.000003] CPU: 4 PID: 1262 Comm: kworker/4:2 Tainted: G W ------------ 3.10.0-320.el7.rhel72.stable.backport.3.x86_64.debug #1 [ +0.000001] Hardware name: LENOVO 20EGS0R600/20EGS0R600, BIOS GNET71WW (2.19 ) 02/05/2015 [ +0.000008] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] [ +0.000001] ffffffff82c26c90 00000000a527b914 ffff88046399bae8 ffffffff816fe04d [ +0.000004] ffff88046399bb58 ffffffff8110f47f ffff880461438000 0001009b840fc003 [ +0.000002] ffff880461438a98 0000000000000000 0000000804dc26e1 ffffffff824a2c00 [ +0.000003] Call Trace: [ +0.000004] [<ffffffff816fe04d>] dump_stack+0x19/0x1b [ +0.000004] [<ffffffff8110f47f>] __lock_acquire+0x115f/0x1250 [ +0.000002] [<ffffffff8110fd49>] lock_acquire+0x99/0x1e0 [ +0.000002] [<ffffffff810b29a5>] ? flush_work+0x5/0x2e0 [ +0.000002] [<ffffffff810b29ee>] flush_work+0x4e/0x2e0 [ +0.000002] [<ffffffff810b29a5>] ? flush_work+0x5/0x2e0 [ +0.000004] [<ffffffff81025905>] ? native_sched_clock+0x35/0x80 [ +0.000002] [<ffffffff81025959>] ? sched_clock+0x9/0x10 [ +0.000002] [<ffffffff810da1f5>] ? local_clock+0x25/0x30 [ +0.000002] [<ffffffff8110dca9>] ? mark_held_locks+0xb9/0x140 [ +0.000003] [<ffffffff810b4ed5>] ? __cancel_work_timer+0x95/0x160 [ +0.000002] [<ffffffff810b4ee8>] __cancel_work_timer+0xa8/0x160 [ +0.000002] [<ffffffff810b4fb0>] cancel_work_sync+0x10/0x20 [ +0.000007] [<ffffffffa0160d17>] drm_dp_destroy_mst_branch_device+0x27/0x120 [drm_kms_helper] [ +0.000006] [<ffffffffa0163968>] drm_dp_mst_link_probe_work+0x78/0xa0 [drm_kms_helper] [ +0.000002] [<ffffffff810b5850>] process_one_work+0x220/0x710 [ +0.000002] [<ffffffff810b57e4>] ? process_one_work+0x1b4/0x710 [ +0.000005] [<ffffffff810b5e5b>] worker_thread+0x11b/0x3a0 [ +0.000003] [<ffffffff810b5d40>] ? process_one_work+0x710/0x710 [ +0.000002] [<ffffffff810beced>] kthread+0xed/0x100 [ +0.000003] [<ffffffff810bec00>] ? insert_kthread_work+0x80/0x80 [ +0.000003] [<ffffffff817121d8>] ret_from_fork+0x58/0x90 v2: add flush_work. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-02drm/dp/mst: split connector registration into two parts (v2)Dave Airlie
In order to cache the EDID properly for tiled displays, we need to retrieve it before we register the connector with userspace, otherwise userspace can call get resources and try and get the edid before we've even cached it. This fixes some problems when hotplugging mst monitors, with X/mutter running. As mutter seems to get 0 modes for one of the monitors in the tile. v2: fix warning in radeon handle tile setting in cached path rather than get edid path. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-02drm/dp/mst: update the link_address_sent before sending the link address (v3)Dave Airlie
Update the state before sending the msg to close it. v2: reset value if return indicates we haven't send the msg. v3: just clean the code up. Pointed out by Adam J Richter on Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91481 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-02drm/dp/mst: fixup handling hotplug on port removal.Dave Airlie
output ports should always have a connector, unless in the rare case connector allocation fails in the driver. In this case we only need to teardown the pdt, and free the struct, and there is no need to send a hotplug msg. In the case were we add the port to the destroy list we need to send a hotplug if we destroy any connectors, so userspace knows to reprobe stuff. this patch also handles port->connector allocation failing which should be a rare event, but makes the code consistent. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-02drm/dp/mst: don't pass port into the path builder functionDave Airlie
This is unnecessary and it makes it easier to see what is needed from port. also add blank line to make things nicer. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-02drm/radeon: drop radeon_fb_helper_set_parAlex Deucher
It was just a wrapper around drm_fb_helper_set_par that called cursor_set2 in addition. Now that the core handles this, drop this radeon specific version. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-02drm: handle cursor_set2 in restore_fbdev_modeAlex Deucher
If a driver uses the cursor_set2 crtc callback rather than cursor_set, use that. This fixes the fbdev helper for drivers that use cursor_set2. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-02Merge tag 'drm-intel-fixes-2015-10-01' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes a few i915 fixes for v4.3. * tag 'drm-intel-fixes-2015-10-01' of git://anongit.freedesktop.org/drm-intel: drm/i915: Call non-locking version of drm_kms_helper_poll_enable(), v2 drm: Add a non-locking version of drm_kms_helper_poll_enable(), v2 drm/i915: Consider HW CSB write pointer before resetting the sw read pointer drm/i915/skl: Don't call intel_prepare_ddi when encoder list isn't yet initialized.
2015-10-02Merge tag 'vmwgfx-fixes-4.3-151001' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-fixes A single commit to fix a command submission hang regression. Pull request of 2015-10-01 * tag 'vmwgfx-fixes-4.3-151001' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Fix a command submission hang regression
2015-10-02Merge branch 'exynos-drm-fixes' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes This pull request includes regression fixups, build warnings, and trivial cleanups which mostly remove some codes not used anymore. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: Staticize local function in exynos_drm_gem.c drm/exynos: fimd: actually disable dp clock drm/exynos: dp: remove suspend/resume functions drm/exynos: remove unused mode_fixup() code drm/exynos: remove decon_mode_fixup() drm/exynos: remove fimd_mode_fixup() drm/exynos: rotator: Clock control is unused if !PM drm/exynos: fimc: Clock control is unused if !PM drm/exynos: Suspend/resume is unused if !PM drm/exynos: create a fake mmap offset with gem creation drm/exynos: remove call to drm_gem_free_mmap_offset() drm/exynos: Remove useless EXPORT_SYMBOL_GPLs drm/exynos: cleanup line feed in exynos_drm_gem_get_ioctl drm/exynos: cleanup function calling written twice drm/exynos: staticize exynos_drm_gem_init() drm/exynos: remove unnecessary NULL assignment drm/exynos: fix missed calling of drm_prime_gem_destroy() drm/exynos: fix layering violation of address
2015-10-02Merge branch 'drm-fixes-4.3' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes radeon and amdgpu fixes for 4.3. - backlight s/r fixes - typo fix from Dan - vm debugging fix - remove import_gpu_mem after discussion with Daniel * 'drm-fixes-4.3' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: only print meaningful VM faults drm/amdgpu/cgs: remove import_gpu_mem drm/amdgpu: Restore LCD backlight level on resume drm/radeon: Restore LCD backlight level on resume (>= R5xx) drm/amdgpu: signedness bug in amdgpu_cs_parser_init()
2015-10-01drm/exynos: Staticize local function in exynos_drm_gem.cKrzysztof Kozlowski
The exynos_drm_gem_mmap_buffer() is not used outside so make it static. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-01drm/exynos: fimd: actually disable dp clockGustavo Padovan
fimd_dp_clock_enable() was setting the always to enabled, this patch fix this to actually use the value that is set to 'val'. Reported-by: Emilio López <emilio.lopez@collabora.co.uk> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-01drm/exynos: dp: remove suspend/resume functionsInki Dae
This patch removes unnecessary pm suspend/resume functions. All kms sub drivers will be controlled by top of Exynos drm driver and connector dpms so these sub drivers shouldn't have their own pm interfaces. Signed-off-by: Inki Dae <inki.dae@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2015-10-01drm/qxl: recreate the primary surface when the bo is not primaryFabiano Fidêncio
When disabling/enabling a crtc the primary area must be updated independently of which crtc has been disabled/enabled. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1264735 Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-09-30drm/amdgpu: only print meaningful VM faultsChristian König
Port of radeon commit 9b7d786b900baf7c0d1a7e211570aef1cb27590f. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-09-30drm/amdgpu/cgs: remove import_gpu_memAlex Deucher
It was added for completeness, but we don't have any users for it yet. Daniel noted that it may be racy. Remove it. Change-Id: I5f5546f8911a4f294008a62dc86a73f3face38d1 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-09-30drm/i915: Call non-locking version of drm_kms_helper_poll_enable(), v2Egbert Eich
drm_kms_helper_poll_enable() is called from a context in intel_hpd_irq_storm_disable() where the the mode_config mutex is already locked. When this function was converted to lock this mutex in commit 8c4ccc4ab6f6 ("drm/probe-helper: Grab mode_config.mutex in poll_init/enable") a deadlock occurred. Call the newly implemented non-locking version of this function. Changes since v1: - use function name suffix '_locked' for the function that is to be called from a locked context. Signed-off-by: Egbert Eich <eich@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-09-30drm: Add a non-locking version of drm_kms_helper_poll_enable(), v2Egbert Eich
drm_kms_helper_poll_enable() was converted to lock the mode_config mutex in commit 8c4ccc4ab6f64e859d4ff8d7c02c2ed2e956e07f ("drm/probe-helper: Grab mode_config.mutex in poll_init/enable"). This disregarded the cases where this function is called from a context where this mutex is already locked. Add a non-locking version as well. Changes since v1: - use function name suffix '_locked' for the function that is to be called from a locked context. Signed-off-by: Egbert Eich <eich@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-09-30drm/vmwgfx: Fix a command submission hang regressionThomas Hellstrom
When we're out of command buffer space, we turn on the command buffer processed irq without re-checking for finished command buffers afterwards. This might lead to a missed irq and the command submission process waiting forever for space. Fix this by rerunning the command buffer submission handler whenever we're out of command space. This ensures both that we don't needlessly turn on the irq, and that if we decide to turn on the irq, we recheck for finished command buffers before going to sleep. Reported-and-tested-by: Bryan Li <ldexin@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2015-09-30drm/exynos: remove unused mode_fixup() codeGustavo Padovan
CRTC's mode_fixup() isn't used anymore in exynos, remove it. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: remove decon_mode_fixup()Gustavo Padovan
The only thing mode_fixup was doing was set the adjusted_mode->vrefresh to 60, but it already has the value of 60 when the decon_mode_fixup() is called. That means this call is actually pointless and can be removed. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: remove fimd_mode_fixup()Gustavo Padovan
The only thing mode_fixup was doing was set the adjusted_mode->vrefresh to 60, but it already has the value of 60 when the fimd_mode_fixup() is called. That means this call is actually pointless and can be removed. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: rotator: Clock control is unused if !PMThierry Reding
Protect the rotator_clk_crtl() function with an #ifdef CONFIG_PM guard to avoid "defined but not used" warnings. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: fimc: Clock control is unused if !PMThierry Reding
Protect the fimc_clk_ctrl() function with an #ifdef CONFIG_PM guard to avoid "defined but not used" warnings. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: Suspend/resume is unused if !PMThierry Reding
Protect the suspend and resume callbacks with an #ifdef CONFIG_PM_SLEEP guard to avoid "defined but not used" warnings. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: create a fake mmap offset with gem creationJoonyoung Shim
Don't create a fake mmap offset in exynos_drm_gem_dumb_map_offset. If not, it will call drm_gem_create_mmap_offset whenever user requests DRM_IOCTL_MODE_MAP_DUMB ioctl. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: remove call to drm_gem_free_mmap_offset()Joonyoung Shim
The drm_gem_object_release() function already performs this cleanup, so there is no reason to do it explicitly. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: Remove useless EXPORT_SYMBOL_GPLsDaniel Kurtz
All the user of these functions are inside exynos-drm driver and you don't need to export the symbols for that case. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: cleanup line feed in exynos_drm_gem_get_ioctlJoonyoung Shim
The beginning of statement in function is next line of a brace. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: cleanup function calling written twiceJoonyoung Shim
By if statment, some function callings are written twice. It needs several line feed by indentation in if statment. Make to one function calling from outside if statment. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: staticize exynos_drm_gem_init()Joonyoung Shim
The exynos_drm_gem_init() is used only in exynos_drm_gem.c file. Make it static and don't export it. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: remove unnecessary NULL assignmentJoonyoung Shim
They will be freed right or was freed already, so NULL assignment is unnecessary. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: fix missed calling of drm_prime_gem_destroy()Joonyoung Shim
When obj->import_attach is existed, code calling drm_prime_gem_destroy() was removed from commit 67e93c808b48 ("drm/exynos: stop copying sg table"), and it's a fault. The drm_prime_gem_destroy() is cleanup function which GEM drivers need to call when they use drm_gem_prime_import() to import dma-bufs, so exynos-drm driver using drm_gem_prime_import() needs calling drm_prime_gem_destroy(). Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: fix layering violation of addressJoonyoung Shim
There is no guarantee that DMA addresses are the same as physical addresses, but dma_to_pfn() knows how to convert a dma_addr_t to a PFN which can then be converted to a struct page. Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-29drm/amdgpu: Restore LCD backlight level on resumeAlex Deucher
Instead of only enabling the backlight (which seems to set it to max brightness), just re-set the current backlight level, which also takes care of enabling the backlight if necessary. Port of radeon commit: drm/radeon: Restore LCD backlight level on resume (>= R5xx) Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-09-29drm/radeon: Restore LCD backlight level on resume (>= R5xx)Michel Dänzer
Instead of only enabling the backlight (which seems to set it to max brightness), just re-set the current backlight level, which also takes care of enabling the backlight if necessary. Only the radeon_atom_encoder_dpms_dig part tested on a Kaveri laptop, the radeon_atom_encoder_dpms_avivo part is only compile tested. Cc: stable@vger.kernel.org Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-09-29drm/amdgpu: signedness bug in amdgpu_cs_parser_init()Dan Carpenter
The "i" variable should be signed or it leads to a crash in the error handling code. Fixes: 1d263474c441 ('drm/amdgpu: unwind properly in amdgpu_cs_parser_init()') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-09-28drm/i915: Consider HW CSB write pointer before resetting the sw read pointerMichel Thierry
A previous commit resets the Context Status Buffer (CSB) read pointer in ring init commit c0a03a2e4c4e ("drm/i915: Reset CSB read pointer in ring init") This is generally correct, but this pointer is not reset after suspend/resume in some platforms (cht). In this case, the driver should read the register value instead of resetting the sw read counter to 0. Otherwise we process old events, leading to unwanted pre-emptions or something worse. But in other platforms (bdw) and also during GPU reset or power up, the CSBWP is reset to 0x7 (an invalid number), and in this case the read pointer should be set to 5 (the interrupt code will increment this counter one more time, and will start reading from CSB[0]). v2: When the CSB registers are reset, the read pointer needs to be set to 5, otherwise the first write (CSB[0]) won't be read (Mika). Replace magic numbers with GEN8_CSB_ENTRIES (6) and GEN8_CSB_PTR_MASK (0x07). Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Lei Shen <lei.shen@intel.com> Signed-off-by: Deepak S <deepak.s@intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-09-28drm/i915/skl: Don't call intel_prepare_ddi when encoder list isn't yet ↵Rodrigo Vivi
initialized. In case something goes wrong with power well initialization we were calling intel_prepare_ddi during boot while encoder list isnt't initilized. [ 9.618747] i915 0000:00:02.0: Invalid ROM contents [ 9.631446] [drm] failed to find VBIOS tables [ 9.720036] BUG: unable to handle kernel NULL pointer dereference at 00000000 00000058 [ 9.721986] IP: [<ffffffffa014eb72>] ddi_get_encoder_port+0x82/0x190 [i915] [ 9.723736] PGD 0 [ 9.724286] Oops: 0000 [#1] PREEMPT SMP [ 9.725386] Modules linked in: intel_powerclamp snd_hda_intel(+) coretemp crc 32c_intel snd_hda_codec snd_hda_core serio_raw snd_pcm snd_timer i915(+) parport _pc parport pinctrl_sunrisepoint pinctrl_intel nfsd nfs_acl [ 9.730635] CPU: 0 PID: 497 Comm: systemd-udevd Not tainted 4.3.0-rc2-eywa-10 967-g72de2cfd-dirty #2 [ 9.732785] Hardware name: Intel Corporation Cannonlake Client platform/Skyla ke DT DDR4 RVP8, BIOS CNLSE2R1.R00.X021.B00.1508040310 08/04/2015 [ 9.735785] task: ffff88008a704700 ti: ffff88016a1ac000 task.ti: ffff88016a1a c000 [ 9.737584] RIP: 0010:[<ffffffffa014eb72>] [<ffffffffa014eb72>] ddi_get_enco der_port+0x82/0x190 [i915] [ 9.739934] RSP: 0000:ffff88016a1af710 EFLAGS: 00010296 [ 9.741184] RAX: 000000000000004e RBX: ffff88008a9edc98 RCX: 0000000000000001 [ 9.742934] RDX: 000000000000004e RSI: ffffffff81fc1e82 RDI: 00000000ffffffff [ 9.744634] RBP: ffff88016a1af730 R08: 0000000000000000 R09: 0000000000000578 [ 9.746333] R10: 0000000000001065 R11: 0000000000000578 R12: fffffffffffffff8 [ 9.748033] R13: ffff88016a1af7a8 R14: ffff88016a1af794 R15: 0000000000000000 [ 9.749733] FS: 00007eff2e1e07c0(0000) GS:ffff88016fc00000(0000) knlGS:00000 00000000000 [ 9.751683] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9.753083] CR2: 0000000000000058 CR3: 000000016922b000 CR4: 00000000003406f0 [ 9.754782] Stack: [ 9.755332] ffff88008a9edc98 ffff88008a9ed800 ffffffffa01d07b0 00000000fffb9 09e [ 9.757232] ffff88016a1af7d8 ffffffffa0154ea7 0000000000000246 ffff88016a370 080 [ 9.759182] ffff88016a370080 ffff88008a9ed800 0000000000000246 ffff88008a9ed c98 [ 9.761132] Call Trace: [ 9.761782] [<ffffffffa0154ea7>] intel_prepare_ddi+0x67/0x860 [i915] [ 9.763332] [<ffffffff81a56996>] ? _raw_spin_unlock_irqrestore+0x26/0x40 [ 9.765031] [<ffffffffa00fad01>] ? gen9_read32+0x141/0x360 [i915] [ 9.766531] [<ffffffffa00b43e1>] skl_set_power_well+0x431/0xa80 [i915] [ 9.768181] [<ffffffffa00b4a63>] skl_power_well_enable+0x13/0x20 [i915] [ 9.769781] [<ffffffffa00b2188>] intel_power_well_enable+0x28/0x50 [i915] [ 9.771481] [<ffffffffa00b4d52>] intel_display_power_get+0x92/0xc0 [i915] [ 9.773180] [<ffffffffa00b4fcb>] intel_display_set_init_power+0x3b/0x40 [i91 5] [ 9.774980] [<ffffffffa00b5170>] intel_power_domains_init_hw+0x120/0x520 [i9 15] [ 9.776780] [<ffffffffa0194c61>] i915_driver_load+0xb21/0xf40 [i915] So let's protect this case. My first attempt was to remove the intel_prepare_ddi, but Daniel had pointed out this is really needed to restore those registers values. And Imre pointed out that this case was without the flag protection and this was actually where things were going bad. So I've just checked and this indeed solves my issue. The regressing intel_prepare_ddi call was added in commit 1d2b9526a790d55b7ae870934a74937081f62de2 Author: Damien Lespiau <damien.lespiau@intel.com> Date: Fri Mar 6 18:50:53 2015 +0000 drm/i915/skl: Restore the DDI translation tables when enabling PW1 Cc: Imre Deak <imre.deak@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> [Jani: regression reference] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-09-25Merge tag 'drm-intel-fixes-2015-09-24' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes a few drm/i915 fixes, including a fix to the recent regression reported by Sedat Dilek * tag 'drm-intel-fixes-2015-09-24' of git://anongit.freedesktop.org/drm-intel: drm/i915/bios: handle MIPI Sequence Block v3+ gracefully drm/i915: Add primary plane to mask if it's visible drm/i915: workaround bad DSL readout v3 drm/i915: fix kernel-doc warnings in intel_audio.c
2015-09-24Merge tag 'vmwgfx-fixes-4.3-150924' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-fixes Pull request of 2015-09-24 Vmwgfx fixes for 4.3: - A couple of uninitialized variable fixes by Christian Engelmayer - A TTM fix for a bug that causes problems with the new vmwgfx device init - A vmwgfx refcounting fix - A vmwgfx iomem caching fix - A DRM change to allow also control clients to read the drm driver version. * tag 'vmwgfx-fixes-4.3-150924' of git://people.freedesktop.org/~thomash/linux: drm: Allow also control clients to check the drm version drm/vmwgfx: Fix uninitialized return in vmw_kms_helper_dirty() drm/vmwgfx: Fix uninitialized return in vmw_cotable_unbind() drm/vmwgfx: Only build on X86 drm/ttm: Fix memory space allocation v2 drm/vmwgfx: Map the fifo as cached drm/vmwgfx: Fix up user_dmabuf refcounting
2015-09-24drm: Allow also control clients to check the drm versionThomas Hellstrom
This should be harmless. Vmware will, due to old infrastructure reasons, be using a privileged control client to supply GUI layout information rather than obtaining it from the device. That control client will be needing access to DRM version information. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Acked-by: David Herrmann <dh.herrmann@gmail.com>
2015-09-24drm/vmwgfx: Fix uninitialized return in vmw_kms_helper_dirty()Christian Engelmayer
Function vmw_kms_helper_dirty() uses the uninitialized variable ret as return value. Make the result deterministic and directly return as the variable is unused anyway. Detected by Coverity CID 1324255. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 08:37:29 +0000